Single-In-Line Conformal

Coated RoHS Compliant

D Series

· 4 to 14 Leads
· Standard and custom circuits
· Space saving design

Specification
Reverse Voltage, VR 80V
Reverse Current, IR 1.0µA (VR = 70V)
Forward Current, IF 100mA Average, 300mA Surge (1µs Max.)
Forward Voltage, VF 1.2V @ IF = 100mA
Package Power, PPKG 200mW @ 25oC
Reverse Recovery Time, trr 4ns (VR = 6V, IF = 5mA, RL = 50Ω)
Capacitance, C 5.5pF (VR = 6V, f = 1MHz)
Storage Temperature Range - 55°C to 125°C
Operating Temperature Range - 25°C to 80°C

General Note
TT electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT electronics’ own data and is considered accurate at time of going to print.
www.bitechnologies.com www.irctt.com www.welwyn-tt.com

© TT electronics plc
03.12
Single-In-Line Conformal
Coated RoHS Compliant
D Series

Specification
Circuit Type Polarity “A” Polarity “C”

1
N = 4 to 14

2
N = 3 to 13
(Odd #)

3
N = 4 to 14
(Even #)

5
N = 4 to 14

General Note
TT electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT electronics’ own data and is considered accurate at time of going to print.
www.bitechnologies.com www.irctt.com www.welwyn-tt.com

© TT electronics plc
03.12
Single-In-Line Conformal
Coated RoHS Compliant
D Series

Outline Dimensions (Inch/mm)

Typical Part Marking

General Note
TT electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT electronics’ own data and is considered accurate at time of going to print.
www.bitechnologies.com www.irctt.com www.welwyn-tt.com

© TT electronics plc
03.12
Single-In-Line Conformal
Coated RoHS Compliant
D Series

Ordering Information
D 8-3 C

Model Polartity (see schematic)

A = Common Anode ( circuit 1, circuit 2)
Number of pins: Annode is at pin number 1 (circuit 3, circuit 5)
4 to 14
C = Common Cathode (circuit 1, circuit 2)
Circuit type: Cathode is at pin number 1 (circuit 3, circuit 5)
1 = Bussed with pin 1 in common.
2 = Bussed with centered common.
3 = Isolated.
5 = Dual termination.

Material
Part Material
Substrate Alumina ceramic
Diode Small mold package silicon expitaxial planar diode array
Termination 100% Ag
Lead Pins 100% Sn Plated steel
Junction and Lead Pin finish 96%Sn, 3.5%Ag, 0.5%Cu
Conformal Coat Expoxy resin, UL-94 V-0 rated

Packaging
Number of pins Qty. per plastic bag Qty. per box
3 to 6 100 1000
7 to 12 100 500
13 to 14 50 250

General Note
TT electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT electronics’ own data and is considered accurate at time of going to print.
www.bitechnologies.com www.irctt.com www.welwyn-tt.com

© TT electronics plc
03.12