CO2 Storage

20‘ ISO Tank Containers

ASCO CO2 and Cryogenic 20‘ ISO Tank Containers include a high quality vacuum multi-laminar super insulation and
are supplied complete with all pipework, valves, safety devices, liquid level indicator, pressure gauge and optional
with transfer pump and filling hoses.

All tank containers are designed for transportation by road, ship and rail.

The models are also available on semi-trailer and/or with tractor.

Inner vessels and pipework are made of stainless steel - used for multipurpose transportation of CO2, N2, O2 and Ar.

ASCO reserves the right to modify all specifications without prior notice.

ASCO CARBON DIOXIDE LTD Industriestrasse 2 - CH-8590 Romanshorn / Switzerland - [email protected] - www.ascoco2.com
Specifications:

1. Main Data
Commodity approx. 19‘650 l
Gross water volume: 19'650
Max. allowed working pressure: 22 bar g
Tare weight: approx 8‘600 kg
Max. gross weight: 36‘000 kg
Max. payload: LCO2: approx. 19‘600 kg
LIN: approx. 14‘950 kg
LOX: approx. 21‘240 kg
LAR: approx. 26‘130 kg
Tolerances: on volume 1 %, on weight 2 %
Codes and regulations: ADR / RID / IMDG / (UN-T75) / UIC
Insulation: Vacuum with multi-layer insualtion
Height: approx. 2‘600 mm
Width: approx 2‘440 mm
Overall length: 6‘060 mm
ISO-cornercastings: 20' x 8' x 8'6" ISO dimensions

2. Tank
Inner Vessel
Max. allowed working pressure: 22 bar g
Pressure vessel code: AD 2000-Regelwerk
Test and calculation pressure: 29.9 bar g
Design temperature: -196 / +50 °C
Outer diameter: 2‘200 mm
Number of baffles: 2
Outer Vessel
Design pressure: -1 bar g (full vacuum)
Design temperature: -20 / +50 °C
Outer diameter: 2‘420 mm (not protruding over the frame members)
Overall length: 6‘000 mm (not protruding over the frame members)
Insulation
Type vacuum + multi-layer insulation (super insulated)
Materials
Inner vessel of CO2 tanks: Stainless steel type 1.4311/EN 10028-7 or equivalent
Inner vessel of cryogenic tanks: Stainless steel type 1.4311/DIN 17440 or equivalent
Outer vessel: carbon steel S235JRG2/EN 10025 or equivalent
Piping: stainless steel type 340 (L)
Valves for CO2 tanks: ball valves, stainless steel, for CO2
Valves for cryogenic tanks Cryogenic valves

3. Frame
The frame is of „Beam Type“, consisting 8‘ x 8‘6“-frame at each end, connected to each end. Handling to
be done by means of the corner castings only. The container can be secured by twist locks on rail and road
vehicles complying to the relevant requirements of ISO 668 freight containers.

ASCO CARBON DIOXIDE LTD Industriestrasse 2 - CH-8590 Romanshorn / Switzerland - [email protected] - www.ascoco2.com
 Lockable machinery compartment:

All stainless steel pipework and valves neatly arranged in lockable machinery compartment.
Outside of the machinery compartment is a lockable document holder installed.

Available Types:

ASCO‘s 20‘ ISO Tank Containers are optionally available on semi-trailer and/or tractor.

All ISO tank containers include:

• inner vessel made of stainless steel

• all pipe work made of stainless steel
• all valving necessary for proper operation (stainless steel ball valves for CO2 and bronze globe valves for
cryogenic)
• all necessary safety equipment
• all instruments and safety lines that form part of the tank, including pressure and level gauge
• transfer pump and filling hoses (optional)

Larger sizes also available. Please ask for details!

ASCO CARBON DIOXIDE LTD Industriestrasse 2 - CH-8590 Romanshorn / Switzerland - [email protected] - www.ascoco2.com
 ASCO 20‘ ISO Tank Container:

Typical Flow Diagram for 20‘ ISO Tank CO2 Container

1 Vapour Balance Line Valve

2 Main Bottom Isolation Valve
3 Vacuum Point
4 Bursting Disc Vacuum Jacket
5 Divertor Valve
6 Safety Valve
7 Instrument Liquid Valve
8 Instrument Gas Valve
9 Flange Connection with Blindflange
(without option)
10 Fill and Discharge Line Purge Valve
11 Trycock Nett Capacity 95% Valve
12 Vapour Line Purge Valve
13 Level Gauge Balance Line Valve
14 Liquid Gauge Level
15 Pressure Gauge
16 Connection Fill and Discharge Line
(Flange Coupling)
17 Liquid from Pump Delivery Valve
18 Pump Isolation Valve
19 Pump
20 Thermal Relief Valve
21 Connection Vapour Line
(Flange Coupling)
22 Fill and Discharge Valve
23 Flange Connection

Typical Flow Diagram for 20‘ ISO Tank Cryogenic Container

1 Vapour Balance Line Valve
2 Bottom Fill Isolation Valve
3 Top Fill Isolation Valve
4 Bursting Disc Vacuum Jacket
5 Divertor Valve
6 Safety Valve
7 Instrument Liquid Valve
8 Instrument Gas Valve
9 Flange Connection with Blindflange
(without option)
10 Fill Line Purge Valve
11 Trycock Nett Capacity 95% Valve
12 Vapour Line Purge Valve
13 Level Gauge Balance Line Valve
14 Liquid Gauge Level Valve
15 Pressure Gauge
16 Vacuum Point
17 Flange Connection with Blindflange
18 Liquid to Pressure Build Up Valve
19 Pump
20 Fin Vaporiser
21 Thermal Relief Valve
22 Pressure Build Up Gas Return Valve
23 Liquid to Pump Fill Valve
24 Pump
25 Liquid from Pump Delivery Valve
26 Pump By-pass Valve
27 Liquid from Pump Delivery Valve
28 Bottom Fill Pump Isolation Valve
29 Coupling with Plug
30 Flange Connection

ASCO CARBON DIOXIDE LTD Industriestrasse 2 - CH-8590 Romanshorn / Switzerland - [email protected] - www.ascoco2.com
Available standard 20‘ ISO Tank Container:

Pos. 001

CO2 20‘ ISO Tank Container part no. 912150

Vaccum super insulated 20‘ ISO tank container (UN-T75) with stainless steel inner
vessel, including hose box.

Gross water volume: approx. 19‘650 l

Max allowed working pressure: 22 bar g
Tare weight: approx. 8‘600 kg
Max. gross weight: 36‘000 kg
Max. payload: approx: LCO2: 19‘600 kg

Optionally available on semi-trailer and/or tractor.

All ISO tank container include:

• inner vessel made of stainless steel
• all pipework made of stainless steel
• all valving necessary for proper operation
• all necessary safety equipment
• all instruments and safety lines that form part of the tank, including pressure
and level gauge
• optionally transfer pump and filling hoses are available

Pos. 002

Cryogenic 20‘ ISO Tank Container part no. 912155

Vaccum super insulated 20‘ ISO tank container (UN-T75) with stainless steel inner
vessel, including hose box.

Gross water volume: approx. 19‘650 l

Max allowed working pressure: 22 bar g
Tare weight: approx. 8‘600 kg
Max. gross weight: 36‘000 kg
Max. payload: approx: LIN: 14‘950 kg
LOX: 21‘240 kg
LAR: 26‘130 kg

Optionally available on semi-trailer and/or tractor.

All ISO tank container include:

• inner vessel made of stainless steel
• all pipework made of stainless steel
• all valving necessary for proper operation
• all necessary safety equipment
• all instruments and safety lines that form part of the tank, including pressure
and level gauge
• optionally transfer pump and filling hoses are available

ASCO CARBON DIOXIDE LTD Industriestrasse 2 - CH-8590 Romanshorn / Switzerland - [email protected] - www.ascoco2.com