Scribd
Upload
216 views2 pages

CS 302GC PDF

Uploaded by

Vortex63
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
216 views2 pages

CS 302GC PDF

Uploaded by

Vortex63
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

FEDERAL SIGNAL CORPORATION

SelecTone ® Audible
Signaling Device
Model 302GC

Federal Signal’s Model 302GC SelecTone® Speaker Amplifier is


designed to produce crisp, clear tones, digital voice messages and
live public address in harsh environments with high ambient noise
EXTRA OUTPUT POWER levels.
FOR PLANT EVACUATION The rugged speaker cone and projector are constructed of spun
aluminum. The internal circuitry, tone module, and gain control are
• Available in 24VAC/DC, 120VAC contained in a housing constructed of die-cast aluminum. All sur-
and 240VAC faces are sealed with powder-coat paint. Dust- and moisture-proof
gaskets provide protection from the elements.
• Built-in gain control The 302GC is UL Listed for indoor and outdoor use. It has been
• Produces 0dBa to 114dBa @ 10' designed, tested and approved for use in Type 3R applications.
(100dBa to 124dBa @ 1m) Internal gain control allows output adjustment from 0dBa to a maxi-
mum of 114dBa at 10 feet.
• Type 3R, IP54 enclosure
SelecTone Speaker Amplifiers are used individually or as part of a
• Digital signal amplification plant-wide emergency notification system. The Model UTM Universal
Tone Module, with 32 tones, or the TM33 Custom Tone Module is
• Fused input and output plugged into a single SelecTone Speaker Amplifier for stand-alone
use or into a SelecTone Command Unit for plant-wide signaling.
• Indoor/outdoor use
For plant-wide signaling, a Connector Kit is installed into each
• UL 1480 and CSFM Approved SelecTone Speaker Amplifier and wired to a central controller.
SelecTone Command Units and CommCenter® Digital Message
• UL and cUL Listed
Centers broadcast tones, voice messages, melodies and live public
address to an unlimited number of SelecTone Speaker Amplifiers.
Typical applications for SelecTone include emergency warning, plant
evacuation, start and dismissal, public address, and process control
signaling.

Operating Standby Decibels @


Model Voltage Current Current 10' 1m
302GC-024 24VDC 1.00 amps 50mA 114 124
302GC-024 24VAC 50/60Hz 1.40 amps 100mA 114 124

5
302GC-120 120VAC  50/60Hz 0.30 amps 50mA 114 124
yyr 302GC-240 240VAC  50/60Hz 0.15 amps 35mA 114 124
WA Y
RRANT
SELECTONE ® AUDIBLE SIGNALING DEVICE (302GC)

9.9"/252 mm
10.2"/258 mm
8.6"/219 mm

Spun Aluminum
Projector

13.9"
353 mm

Full
5.63"/ Speaker
143 mm Rotation Fully
Gasketed
Re-Entrant Die-Cast
Trumpet Aluminum
Horn Type Housing
Loudspeaker

3.38" 4.9"
85.85 mm 125 mm

SPECIFICATIONS HOW TO ORDER


Operating Temperature: -67°F to 150°F -55°C to 66°C • Specify model number and voltage
• Specify Tone Module for stand alone
Net Weight: operation
120/240VAC 7.5 lbs. 3.4 kg   Universal Tone Module (UTM)
Shipping Weight:   Custom Tone Module (TM33)
120/240VAC 8.9 lbs. 4.0 kg • Specify Connector Kit for use in
systems (Call Factory for system
Height: 13.9" 353.0 mm design assistance)
Width: 10.2" 258.0 mm   25 Vrms Connector Kit (AM25CK)
  70 Vrms Connector Kit (AM70CK)
Depth: 9.9" 252.0 mm
• Please refer to Model Number Index
REPLACEMENT PARTS 302GC beginning on page 375

Description Part Number


Amplifier Assembly, 24VAC/DC K2005502A-02
Amplifier Assembly, 120/240VAC K2005502A-02
Speaker Assembly K8590246A
Transformer,120VAC  K120846A
Transformer, 240VAC  K120856A
Voice Coil, Series C K8590246A

2645 Federal Signal Dr., University Park, IL 60484 Tel: 708.534.4756 Fax: 708.534.4852 www.federalsignal-indust.com

You might also like