METCO Training Course Program Overview

D351519X412 October 2012

Gas Flow Measurement Course

Background
The METCO™ fiscal metering course is based on a series of It should be emphasized that this training course already
standard curriculum that are referred to as generic courses. The incorporates most aspects of fiscal / custody transfer metering
generic courses are based upon a modular format. and can accommodate most custody transfer metering station
configurations. The course presentation material is provided
The structure of the course modules are summarized on page 3 in a PDF format on a course training disk. Selected files may be
of this document. preAviewed by the client on any PC.

Material for this oil and gas flow measurement course has been Where can I take the course?
accumulated over more than 30 years. The course material is Training courses can be taken at out Aberdeen headquarters in
continuously being upgraded and expanded to incorporate new Scotland or at your preferred global facility.
and revised methods, techniques or equipment. The generic
course assumes that some delegates may require explanations METCO can assist you with finding local accommodation and
of basic principles so basic first principles are covered. The course transportation for any out-of-town candidates who are put
also delves into the more complex aspects of fiscal metering. forward. Our facility is located within 3km from the Aberdeen
Emphasis between the ‘basic’ or the ‘complex’ aspects can be Airport terminal.
varied to suit the experience of the delegates attending.
METCO Training Course October 2012

Who should attend? How much will it cost?

The course is focused towards the following personnel: Please contact us for details on the cost to attend this course.

Maintenance technicians The course fee includes lunch and a copy of the training manual
Supervisors on CD in PDF format.
Engineers
If you have more than three candidates for one of our pre-
A basic knowledge of metering operations or maintenance is organized open courses, we would be happy to offer a discount.
necessary for attendance on this course.
Whom can I contact for more details?
Generic gas flow measurement: What We would be happy to discuss any aspects of your measurement
will I learn? training requirements, be it for one of our generic open
The course addresses the concepts of custody transfer metering, training courses, to assessing your metering technicians in the
principle of allocation in shared facilities, and the general Scottish Vocational Qualification (SVQ) in flow measurement
operating principles of custody transfer instruments: “Measurement Processes (Maintenance) Level 3”.

Flow meters (orifice, turbine, ultrasonic, venture, corilis) You can contact the METCO Sales Team through email:
Densitometers [email protected]
Pressure / temperature / differential transmitters
Automatic samplers How do I book it?
BS & W measurements Booking your training course is very easy. Please contact one of
Chromatography our sales team, who will provide you with full joining instructions
Physics of natural gas mixtures and payment options.*
Calculation routines and verification of flow computers
Implementation of international standards How to pay?
Generic operating and reporting procedures Payment for training can be made in advance by:
The function of the pipeline and regulatory auditors
Review of typical fault conditions Pro-forma invoice
Pre-approved Nett 30 day credit account
We are happy to set up a course to suit your needs and can even
customize the modules and training to your exact requirements. What are the topics covered during
Please ask us about our customized client training courses and the course?
we will be happy to provide details. The trainer will work with the list of modules overleaf and adapt
the course to class experience and requirements.
How long will it take to complete?
The generic course is run over two days, scheduled from 0900 to
1700 hours.

Any customized client courses may require alternative timescales

to complete.

*Subject to Terms and Conditions.

2 www.EmersonProcess.com/METCO
October 2012 METCO Training Course

Course Modules
General
Session Module Topic Content
1 Tyro 010 Introduction Greetings and introduction
Focus on monetary implications of hydrocarbon measurements,
2 Tyro 020 Why meter?
overview of methods, and definition of terms
Definition of SI units and principles of traceability of measurement /
3 Tyro 650 Traceability
instrument calibration
4 Tyro 910 Uncertainty Relevance and general principles of meter station uncertainty budgets
Overview of principles and implications of shared pipeline hydrocarbon
5 Tyro 600 Allocation
allocation, based on North Sea practices

Flow Computers
Session Module Topic Content
6 Tyro 500 Flow computer overview Overview on common features of dedicated flow computers
Differential pressure gas flow
7 Tyro 540 Function and calculation sequence of orifice plate flow computers
computers
8 Tyro 545 Testing DP gas flow computers Principles of verification of orifice plate flow computers
Tyro 580

Gas Metering
Session Module Topic Content
9 Tyro 105 Gas metering overview Introduction to gas flow meters
10
Tyro 810 The multi-path ultrasonic meter Principles and practice of operating gas and liquid MPUSMs
Optional
Principles and practice of operating orifice plate meters, reference plane
11 Tyro100 The orifice plate meter
of measurement, and flow equations
The differential pressure flow
Optional Tyro 110 Derivation of mass flow equations
equation
Optional Tyro 180 Orifice carriers How to operate Daniel and Peco carriers
12 Tyro 115 Metering instruments General principles, pressure and temperature transmitters
13 Tyro 160 The gas densitometer Mobey Solartron gas densitometers and RD analyzers
14 Tyro 150 Gas chromatograph Principles of gas chromatography based on Danalyzers
Optional Tyro 270 Dewpoint instruments Principles of some instruments (e.g., Ametek)
15 Tyro 210 Gas characteristics Gas physics, handling, and deriving properties of gas mixtures
Optional Tyro 590 Wet gas metering Principles of wet gas venturi meters – Murdock, Chisholm, and De Leeuw

Procedures
Session Module Topic Content
16 Tyro 660 Reporting procedures Generalized overview of reporting hydrocarbon meter station data
17 Tyro 665 The audit trail The role of meter station auditors
18 Tyro 670 Operating procedures Generalized overview of operating a hydrocarbon meter station
19 Tyro 680 Fault conditions Guidance on predictable fault conditions and mismeasurement methods

www.EmersonProcess.com/METCO 3
Find us around the corner or around the world Global Headquarters
Emerson Process Management | METCO
Remote Automation Solutions
For a complete list of locations please visit us at www.EmersonProcess.com/Remote Emerson House
Kirkhill Drive, Kirkhill Industrial Estate
Aberdeen, UK AB21 OEU
T +44 1224 215700
F +44 1224 215799

www.EmersonProcess.com/METCO

North America
Emerson Process Management
Remote Automation Solutions
6005 Rogerdale Road
Houston, TX 77072 USA
T +44 1224 215700
F +44 1224 215799

Asia Pacific
Emerson Process Management
Remote Automation Solutions
1 Pandan Crescent
Singapore 128461
T +65 6777 8211
F +65 6777 0947

Middle East and Africa

Emerson Process Management
Remote Automation Solutions
Emerson FZE
P.O. Box 17033
© 2011-2012 Remote Automation Solutions, a business unit of Emerson Process Management. All rights reserved.
Jebel Ali Free Zone – South 2
Dubai, UAE
Bristol, Inc., Bristol Canada, BBI SA de CV and Emerson Process Management Ltd, Remote Automation Solutions (UK), are wholly owned
T +971 4 8118100
subsidiaries of Emerson Electric Co. doing business as Remote Automation Solutions, a business unit of Emerson Process Management.
F +971 4 8865465
FloBoss, ROCLINK, Bristol, Bristol Babcock, ControlWave, TeleFlow, Helicoid, OpenEnterprise, DeltaV, and METCO are trademarks of
Remote Automation Solutions. AMS, PlantWeb, and the PlantWeb logo are marks of Emerson Electric Co. The Emerson logo is a trademark
and service mark of the Emerson Electric Co. All other marks are property of their respective owners.
CIS and Balkans
The contents of this publication are presented for informational purposes only. While every effort has been made to ensure informational
Emerson Process Management
accuracy, they are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein
Remote Automation Solutions
or their use or applicability. Remote Automation Solutions reserves the right to modify or improve the designs or specifications of such
29 Komsomolsky Av.
products at any time without notice. All sales are governed by Remote Automation Solutions’ terms and conditions which are available
Chelyabinsk, 454138 Russia
upon request. Remote Automation Solutions does not assume responsibility for the selection, use or maintenance of any product.
T +7 351 799 5151
Responsibility for proper selection, use and maintenance of any Remote Automation Solutions product remains solely with the purchaser
and end-user.

Latin America
Emerson Process Management
Remote Automation Solutions
Rua R1, 277
Nova Cavaleiros - Macaé (RJ)
27933-375 Brazil
T +55 22 2796 8700
F +55 22 2796 8701

D351519X412 / Printed in UK / 10-12