Scribd
Upload
321 views1 page

How To Setup IPTV On Enigma2

This document provides instructions for setting up IPTV on an Enigma2-based receiver like a DreamBox or Vu+ box. It involves downloading Putty or DCC to connect via telnet, entering login credentials, copying and pasting a provided script to download and install an IPTV playlist, then restarting the receiver to access the new channel bouquet.

Uploaded by

soutinho44
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
321 views1 page

How To Setup IPTV On Enigma2

This document provides instructions for setting up IPTV on an Enigma2-based receiver like a DreamBox or Vu+ box. It involves downloading Putty or DCC to connect via telnet, entering login credentials, copying and pasting a provided script to download and install an IPTV playlist, then restarting the receiver to access the new channel bouquet.

Uploaded by

soutinho44
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

How to setup IPTV on Enigma2 (DreamBox/Vu+

etc)
Created by: Ronald Suan
Modified on: Wed, 15 May, 2019 at 5:31 PM

1- Download and install DCC or Putty


2- Open DCC or Putt
3- Typing host name : local ip address for box
4- Connection type setting : Telnet
5- Enter
6- Username and password entered ( user and pass : root )
7- Copy the command, m3u line we send you by email: wget -O
/etc/enigma2/iptv.sh “http://ourdns:port/get.php?username=XXX&pass
word=XXX&type=enigma22_script&output=mpegts” && chmod 777
/etc/enigma2/iptv.sh && /etc/enigma2/iptv.sh
8- Paste it in DCC or Putty ssh
9- Enter / Wait for it to be installed
10- Restart the receiver
11- Go to your box “Favorites” and you should have a new bouquet with the
name Franqie IPTV.

You might also like