Scribd
Upload
304 views2 pages

Mod Change 4G Huawei ANR

1. Enable ANR and set cell reselection parameters to allow the UE to reselect between different frequencies. 2. Configure inter-frequency cell reselection priorities and thresholds to control reselection between LTE frequency layers. 3. Modify inter-RAT and inter-frequency handover parameters to allow handover between 3G and 4G networks when signal quality thresholds are met.

Uploaded by

nguyenvanphuc_12p2
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
304 views2 pages

Mod Change 4G Huawei ANR

1. Enable ANR and set cell reselection parameters to allow the UE to reselect between different frequencies. 2. Configure inter-frequency cell reselection priorities and thresholds to control reselection between LTE frequency layers. 3. Modify inter-RAT and inter-frequency handover parameters to allow handover between 3G and 4G networks when signal quality thresholds are met.

Uploaded by

nguyenvanphuc_12p2
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

1.

Enable ANR
MOD ENODEBALGOSWITCH:ANRSWITCH=IntraRatEventAnrSwitch-1&IntraRatFastAnrSwitch-1;

MOD CELLALGOSWITCH:LOCALCELLID=4,ANRFUNCTIONSWITCH=INTRA_RAT_ANR_SW-
1&INTER_RAT_ANR_SW-1; Commented [A1]: Ennable-Inter and Intra frequency

2. Idle

- Cell reselection
MOD
CELLRESEL:LOCALCELLID=4,QHYST=DB2_Q_HYST,THRSHSERVLOW=8,CELLRESELPRIORITY=7,QRXLEVMIN
=-64; Commented [A2]: Ngưỡng Cell reselection UE sẽ lựa cho sang
cell có prority thấp hơn khi RSRP>
- Cell reselection Inter frequency QRXLEVMIN+HRSHSERVLOW+Hyst

ADD
EUTRANINTERNFREQ:LOCALCELLID=4,DLEARFCN=1299,ULEARFCNCFGIND=NOT_CFG,CELLRESELPRIORIT
YCFGIND=CFG,CELLRESELPRIORITY=6,SPEEDDEPENDSPCFGIND=NOT_CFG,MEASBANDWIDTH=MBW50,T
HRESHXHIGH=8,THRESHXLOW=7,PMAXCFGIND=NOT_CFG,QQUALMINCFGIND=NOT_CFG,MLBINTERFRE
QHOEVENTTYPE=EventA3;

ADD
EUTRANINTERNFREQ:LOCALCELLID=8,DLEARFCN=3199,ULEARFCNCFGIND=NOT_CFG,CELLRESELPRIORIT
YCFGIND=CFG,CELLRESELPRIORITY=7,SPEEDDEPENDSPCFGIND=NOT_CFG,MEASBANDWIDTH=MBW75,T
HRESHXHIGH=8,PMAXCFGIND=NOT_CFG,QQUALMINCFGIND=NOT_CFG;

ADD
EUTRANINTERNFREQ:LOCALCELLID=16,DLEARFCN=3074,ULEARFCNCFGIND=NOT_CFG,CELLRESELPRIORI
TYCFGIND=CFG,CELLRESELPRIORITY=7,SPEEDDEPENDSPCFGIND=NOT_CFG,MEASBANDWIDTH=MBW50,
THRESHXHIGH=8,PMAXCFGIND=NOT_CFG,QQUALMINCFGIND=NOT_CFG;

ADD
EUTRANINTERNFREQ:LOCALCELLID=4,DLEARFCN=3099,ULEARFCNCFGIND=NOT_CFG,CELLRESELPRIORIT
YCFGIND=CFG,CELLRESELPRIORITY=7,SPEEDDEPENDSPCFGIND=NOT_CFG,MEASBANDWIDTH=MBW100,
THRESHXHIGH=8,PMAXCFGIND=NOT_CFG,QQUALMINCFGIND=NOT_CFG; Commented [A3]: Add Frequency đo khác tần
2600: Cellreselection priority = 7
1800: Cell reselection priority =6
Handover 2600 to 1800 Reselection: 1800 to 2600 when: RSRP2600 > QRXLEVMIN+
THRESHXHIGH
Reselection: 1800 to 2600 when: RSRP1800 > QRXLEVMIN+
MOD THRESHXHIGH and RSRP2600< QRXLEVMIN+HRSHSERVLO
INTERFREQHOGROUP:LOCALCELLID=5,INTERFREQHOGROUPID=0,INTERFREQHOA1A2HYST=4,INTERFRE
QHOA1THDRSRP=-108,INTERFREQHOA2THDRSRP=- Commented [A4]: Stop A1
110,INTERFREQHOA4HYST=2,INTERFREQHOA4THDRSRP=-109; Commented [A5]: Start A2
Commented [A6]: Target: 1800> -109+1
Handover 1800 2600
MOD
INTERFREQHOGROUP:LOCALCELLID=5,INTERFREQHOGROUPID=0,INTERFREQHOA1A2HYST=4,INTERFRE
QHOA1THDRSRP=-110,INTERFREQHOA2THDRSRP=- Commented [A7]: A1 = -110+2
112,INTERFREQHOA4HYST=2,INTERFREQHOA4THDRSRP=-111; Commented [A8]: A2= -112-2
Commented [A9]: Target 2600 >-111+1
Handover 4G-> 3G (Active)
MOD
INTERRATHOUTRANGROUP:LOCALCELLID=0,INTERRATHOUTRANGROUPID=0,INTERRATHOUTRANB1THD
ECN0=-34,INTERRATHOUTRANB1HYST=2; Commented [A10]: B1 (Target 3G)

MOD
INTERRATHOCOMMGROUP:LOCALCELLID=0,INTERRATHOCOMMGROUPID=0,INTERRATHOA1A2HYST=2,I
NTERRATHOA1THDRSRP=-110,INTERRATHOA2THDRSRP=-113;

You might also like