Scribd Logo
Upload

Welcome to Scribd!

  • 65 views

    Oil Gas Construction Factory L.L.C

    Uploaded by

    Renny Devassy
    This document outlines the technical delivery conditions for seamless pipe fittings made of SA 234 Gr. WPB carbon steel. It specifies that the fittings must meet dimensional and chemical composition requirements, including a maximum carbon content of 0.23% and carbon equivalent less than 0.43%. The material must also meet sour service and corrosion resistance standards, have a normalized heat treatment, and include certification of chemical analysis, mechanical properties and inspection results.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd

    Oil Gas Construction Factory L.L.C

    Uploaded by

    Renny Devassy
    65 views2 pages
    This document outlines the technical delivery conditions for seamless pipe fittings made of SA 234 Gr. WPB carbon steel. It specifies that the fittings must meet dimensional and chemical composition requirements, including a maximum carbon content of 0.23% and carbon equivalent less than 0.43%. The material must also meet sour service and corrosion resistance standards, have a normalized heat treatment, and include certification of chemical analysis, mechanical properties and inspection results.

    Original Description:

    TDC format

    Original Title

    formats

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document outlines the technical delivery conditions for seamless pipe fittings made of SA 234 Gr. WPB carbon steel. It specifies that the fittings must meet dimensional and chemical composition requirements, including a maximum carbon content of 0.23% and carbon equivalent less than 0.43%. The material must also meet sour service and corrosion resistance standards, have a normalized heat treatment, and include certification of chemical analysis, mechanical properties and inspection results.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    65 views2 pages

    Oil Gas Construction Factory L.L.C

    Uploaded by

    Renny Devassy
    This document outlines the technical delivery conditions for seamless pipe fittings made of SA 234 Gr. WPB carbon steel. It specifies that the fittings must meet dimensional and chemical composition requirements, including a maximum carbon content of 0.23% and carbon equivalent less than 0.43%. The material must also meet sour service and corrosion resistance standards, have a normalized heat treatment, and include certification of chemical analysis, mechanical properties and inspection results.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 2

    Oil & Gas Construction Factory L.L.

    C
    Document No.: TDC-1455-FT-02, Rev.: 0
    Date: 30-09-2014
    Job No.: 1455

    TECHNICAL DELIVERY CONDITION FOR SEALESS PIPE FITINGS SA 234 Gr. WPB

    1. Quantity : As per purchase requisition

    2. Dimensions : As per purchase requisition

    3. Name of material : Pipe fittings of wrought carbon steel

    4. Specification designation : SA 234 WPB in accordance with ASME SEC.II, Part A,


    Edition 2010

    5. Grade : WPB

    6. Manufacture : Hot finish, Normalized

    7. Size : As per purchase requisition


    (NPS, schedule Number)

    8. Type of construction : Seamless

    9. End use of material : Sour Service application

    10. Optional requirement : Nil.

    11. Special requirements :


     Shall have a maximum carbon content of 0.23.
     The Carbon Equivalent (CE) based on the Ladle Analysis shall not exceed 0.43, calculated by
    the following formula: Carbon Equivalent = C+ Mn/6 + (Cr+Mo+V)/5 + (Ni+Cu)/15
     Sulphur content in the material shall be ≤ 0.01% and Nickel content in the material shall be
    <1%.
     All materials shall be supplied in the normalized condition. Normalizing shall be carried out as
    a separate heat treatment
     All materials shall be in accordance with the materials property and heat treatment
    requirements of ISO 15156 or NACE MR0175
     Materials shall have hardness at any point (including HAZ & Parent metal) not exceeding
    HRC 22.
     Wrought steel butt welding fittings shall comply with the requirements of MESC 76/201.
     All Material supplied shall be new, clean and free from mill scale, rust, pit and defects.
     Unless noted otherwise in the purchase description, pipe fittings shall be in accordance with
    the following: ASME B 16.9 and SPE 76/200.
     All non-destructive examination shall be performed after heat-treatment.

    Page 1 of 2
    Oil & Gas Construction Factory L.L.C
    Document No.: TDC-1455-FT-02, Rev.: 0
    Date: 30-09-2014
    Job No.: 1455

    TECHNICAL DELIVERY CONDITION FOR SEALESS PIPE FITINGS SA 234 Gr. WPB

    12. Certification : According to SA-234Para-12; Original or Verified true


    copy of Mill test certificate is required in accordance with
    EN10204-3.1: E2004.

    As a minimum, the MTC’s should contain the following:

     Description, Size and Quantity


     Standard & Grade
     Heat/ Melt/ Manufacturing No.
     Heat Treatment Details
     Chemical Analysis
     Mechanical Tests Result
     Hydrostatic Test Result
     Hardness Test Result
     Results of Supplementary Test(s)
     NDE Results
     Nace Compliance Statement
     Dimensional Check Report

    Prepared by Approved by

    (Design Engineer) (Engineering Manager)

    Page 2 of 2

    You might also like