LABORATORY MANUAL

of

PRODUCT DESIGN-I
(B.Tech. Term-II)
(Second Year Common)

ENGINEERING (2nd Semester)

KHANDESH COLLEGE EDUCATION SOCIETY’s

COLLEGE OF ENGINEERING & I.T., JALGAON – 425001 (M.S.)

Affiliated to Dr. BabasahebAmbedkar Technological University, Lonere (M.S.)

 INDEX

Sr. No. Particulars Date of Date of Page

Performance Completion No.
01 Design sketch Using Fusion 360.

02 Design using fusion 360.

Sketch the model dimension are given

03
in figure.

04 Design sketch using fusion 360.

05 Design Sketch using fusion 360.
Design your own product using fusion
06
360.
Design your own product using fusion
07
360.

Subject Teacher HOD

 KCES’s COLLEGE OF ENGINEERING & IT, JALGAON

ELECTRONICS AND TELECOMMUNICATION DEPT

ACADEMIC YEAR: 2018-2019 SEMESTER: 2nd

Name of Student : Grade

Class: _____________ Roll no. :__________

Date of
Subject :Product Design completion

Experiment no. : Date of Performance :

Signature
Title :

AIM: Design Sketch Using Fusion 360

Procedure

1) Select new design file from select menu

2) Select create sketch from sketch drop down

3) Select top plane for selecting plane

4) Create line by following process

 Fig 1 creating line

5)Creating Arc

Fig 2 creating arc

6)Creating fillet

Fig 3 creating fillet

7)Creating mirror copy

Fig 4 creating mirror copy

8)Creating circle & lines to complete

Fig 5 creating mirror copy

9)Dimension the sketch

Fig 6

CONCLUSION
_____________________________________________________________________________________
_____________________________________________________________________________________
 KCES’s COLLEGE OF ENGINEERING & IT, JALGAON

ELECTRONICS AND TELECOMMUNICATION DEPT

ACADEMIC YEAR: 2018-2019 SEMESTER: 2nd

Name of Student : Grade

Class: _____________ Roll no. :__________

Date of
Subject :Product Design completion

Experiment no. : Date of Performance :

Signature
Title :

Aim :Design using fusion 360

Procedure

1)select new design file from select menu

2)select new design from file manu

Fig 1
3) Select create sketch from sketch drop down

Fig 2

4)Select top plane for selecting plane (select XY plane)

Fig 3

5)create line by following process

Fig 4
 Fig 5

Conclusion

______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________
 KCES’s COLLEGE OF ENGINEERING & IT, JALGAON

ELECTRONICS AND TELECOMMUNICATION DEPT

ACADEMIC YEAR: 2018-2019 SEMESTER: 2nd

Name of Student : Grade

Class: _____________ Roll no. :__________

Date of
Subject :Product Design completion

Experiment no. : Date of Performance :

Signature
Title :

Aim: Sketch The Model Dimension Are Given In Figure

Procedure

1)Select new design file from select menu

2)Select create sketch from sketch drop down

3)Select trim tool for remove unwanted area

4)Create sketch stop button from toolbar to exit the sketch mode.

5)Creating extrude for 3D view

Conclusion

______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________
 KCES’s COLLEGE OF ENGINEERING & IT, JALGAON

ELECTRONICS AND TELECOMMUNICATION DEPT

ACADEMIC YEAR: 2018-2019 SEMESTER: 2nd

Name of Student : Grade

Class: _____________ Roll no. :__________

Date of
Subject :Product Design completion

Experiment no. : Date of Performance :

Signature
Title :

Aim: design sketch using fusion 360.

1)select new design file from select menu

2)select create sketch from sketch drop down

3)select top plane for selecting plane

4)create line by following process

5) apply dimension to sketch

6) extrude as per dimension

7)Adding Into Extrude Feature

8)select the line command and starting at top left corner of solid model.

9)select sketch dimension

10)select these sketch and extrude to downward direction

11)pick the top horizontal face model

12)select the center dimension circle and modify the dimension

12)drag the arrow in downward direction

13)adding another cut feature pick the vertical face of 3D solid model
14)start at upper left corner and create three line segment.

15)Set The Cut Option In Feature Option And Set The Extent Option To Object.

Conclusion

______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________
 KCES’s COLLEGE OF ENGINEERING & IT, JALGAON

ELECTRONICS AND TELECOMMUNICATION DEPT

ACADEMIC YEAR: 2018-2019 SEMESTER: 2nd

Name of Student : Grade

Class: _____________ Roll no. :__________

Date of
Subject :Product Design completion

Experiment no. : Date of Performance :

Signature
Title :

AIM: Design Sketch Using Fusion 360

Procedure

1) Select new design file from select menu

2) Select create sketch from sketch drop down

3) Select top plane for selecting plane

4) Create line by following process

5)Sketch the geometry
conclusion