Scribd Logo
Upload

Welcome to Scribd!

  • 89 views

    Load Cell (UTM)

    Uploaded by

    José Rubén Ramos Garza
    The DSCK load cell is a low profile tension and compression load cell suited for applications with limited space. It is machined from solid tool steel and hermetically sealed to withstand side loads and operate in a range of temperatures and loads from 1 to 20 tons. Key specifications include a rated output of 3mV/V, low non-linearity and hysteresis, and IP67 protection for harsh environments.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Load Cell (UTM)

    Uploaded by

    José Rubén Ramos Garza
    89 views1 page
    The DSCK load cell is a low profile tension and compression load cell suited for applications with limited space. It is machined from solid tool steel and hermetically sealed to withstand side loads and operate in a range of temperatures and loads from 1 to 20 tons. Key specifications include a rated output of 3mV/V, low non-linearity and hysteresis, and IP67 protection for harsh environments.

    Original Description:

    Celda de carga manual

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The DSCK load cell is a low profile tension and compression load cell suited for applications with limited space. It is machined from solid tool steel and hermetically sealed to withstand side loads and operate in a range of temperatures and loads from 1 to 20 tons. Key specifications include a rated output of 3mV/V, low non-linearity and hysteresis, and IP67 protection for harsh environments.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    89 views1 page

    Load Cell (UTM)

    Uploaded by

    José Rubén Ramos Garza
    The DSCK load cell is a low profile tension and compression load cell suited for applications with limited space. It is machined from solid tool steel and hermetically sealed to withstand side loads and operate in a range of temperatures and loads from 1 to 20 tons. Key specifications include a rated output of 3mV/V, low non-linearity and hysteresis, and IP67 protection for harsh environments.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    Model DSCK Series The model DSCK is a low profile tension

    and compression shear type load cell suited to


    Compression & tention
    precision applications where headroom and
    low profile load cell (1t ~ 20t)
    side loads are a problem. All units are machined
    from a solid billet of tool steel and sealed with
    welded diaphragms.
    - Hermetically sealed
    - High rated output(3mV/V)
    - Insensitive to side load

    SPECIFICATIONS
    MODEL DSCK
    Rated capacity (R.C.) 1, 2, 3, 5, 10, 20t
    Rated output(R.O.) 3mV/V ± 0.3%
    Non-linearity ˺0.05% R.O.
    Ø
    Hysteresis ˺0.05% R.O.
    Non-repeatability ˺0.02% R.O.
    Creep error ˺0.03% in 20min.
    Zero balance ˺1% R.O.
    Compensated temperature range -10 ~ 70¶j
    Operating temperature range -20 ~ 80¶j
    Temp. effect on rated output ˺0.03% LOAD/10¶j
    Temp. effect on zero balance ˺0.03% R.O./10¶j
    Terminal input resistance 700 Ohms ± 10 Ohms
    Ø
    Terminal output resistance 700 Ohms ± 10 Ohms
    Ø Insulation resistance (Min.) 2000 MOhms at 50V DC
    Ø Excitation voltage 10V(Recommended), 15V(Max.)
    Electrial connection Ø9mmx5m(22AWG x 4Core Shielded)
    Protection class meets IP 67
    Safe overload 150% R.C
    Ultimate overload 300% R.C
    Ø
    Ø ORDERING INFORMATION
    DSCK - 10T
    MODEL CAPACITY
    DSCK 1, 2, 3, 5,10, 20 ton
    Ø
    WIRING INFORMATION
    RED : EXC. (+)
    GREEN : SIG. (+)
    WHITE : EXC. (-)
    BLUE : SIG. (-)
    BARE : GND.

    1 ~5t 10t 20t


    Load LBDSC1 LBDSC2 LBDSC3
    Button
    Mounting MPDSC1 MPDSC2 MPDSC3
    Plate
    Ø
    Bearing
    Plate BPDSC1 BPDSC2 BPDSC3
    Ø
    Tension TPDSC1 TPDSC2 TPDSC3
    Plate
    Rod End SRDSC1 SRDSC2 -
    Ball Joint
    Dimension-mm

    Rated Capacity A B C D E F G H J K L M N O P Q R S T U V Weight


    (kg)
    1~5t(9.81kN ~49.03kN) 118 46 86 34 100 153 M24x2P 9 12 130 106 185 x105 210 x130 23 14 106 32 55 248 28 22 4
    10t (98.07 kN) 138 60 98 50 116 180 M39x2P 11 14 160 126 125 x125 160 x160 30 20 140 45 125 355 43 40 6
    20t (196.1 kN) 186 70 133 73 154 228 M50x2P 14 14 200 150 160 x160 200 x200 30 40 170 - - - - - 12

    Specifications are subject to change without notice


    * JAN, 2010

    148,SANGDAEWON-DONG,JUNGWON-KU, SEONGNAM-CITY, GYEONGGI-DO, KOREA


    BONGSHIN LOADCELL CO., LTD. TEL : 82-31-742-6661 www.bongshin.com
    FAX : 82-31-742-6664 E-mail : [email protected]

    You might also like