FINAL EXAM (Circuits 3)

FINAL EXAM (Circuits 3)

Name: Subject and Section:
Name: Subject and Section: Date :
Date :
Show your complete solution and box your final answer.
Show your complete solution and box your final answer.
1. A series RL circuit consisting of 10 ohm resistor and 2 H inductor was connected to a 60 V DC
1. A series RL circuit consisting of 10 ohm resistor and 2 H inductor was connected to a 60 V DC source through a switch. If the switch is closed at t=0, determine the current equation. (15
source through a switch. If the switch is closed at t=0, determine the current equation. (15 pts)
pts) 2. A series RL circuit consisting of 10 ohm resistor and ¼ F capacitor was connected to a 60 V DC
2. A series RL circuit consisting of 10 ohm resistor and ¼ F capacitor was connected to a 60 V DC source through a switch. If the switch is closed at t=0, determine the current equation. (15
source through a switch. If the switch is closed at t=0, determine the current equation. (15 pts)
pts) 3. A series RLC Circuit having a R=10 ohms, L=2 H, and C= ¼ F was connected across a 24 V DC
3. A series RLC Circuit having a R=10 ohms, L=2 H, and C= ¼ F was connected across a 24 V DC source through a switch. If the switch is closed at t=0, determine the current equation. (25
source through a switch. If the switch is closed at t=0, determine the current equation. (25 pts)
pts) 4. A balanced three-phase wye connected load consisting of 3 ohm resistor and 4 ohm inductive
4. A balanced three-phase wye connected load consisting of 3 ohm resistor and 4 ohm inductive reactance was connected across a 240 V, 3-phase, 60 Hz source. Determine the total real,
reactance was connected across a 240 V, 3-phase, 60 Hz source. Determine the total real, reactive, and apparent power of the circuit. (20 pts)
reactive, and apparent power of the circuit. (20 pts) 5. A 10kW, 0.8 lagging power factor load was connected to a 200 V, 3-phase, 60 Hz source. If the
5. A 10kW, 0.8 lagging power factor load was connected to a 200 V, 3-phase, 60 Hz source. If the power factor is to be improved to 0.9 lagging power factor, determine the KVAR rating of the
power factor is to be improved to 0.9 lagging power factor, determine the KVAR rating of the capacitor to be connected in parallel with the load. (25 pts)
capacitor to be connected in parallel with the load. (25 pts) 6. Two loads A and B are connected in parallel and across a 208V, 3-phase, 60 Hz source. Load A
6. Two loads A and B are connected in parallel and across a 208V, 3-phase, 60 Hz source. Load A takes 20kW at 0.8 lagging power factor while load B takes 20 kVAR at 0.6 lagging power factor.
takes 20kW at 0.8 lagging power factor while load B takes 20 kVAR at 0.6 lagging power factor. Determine the total current of the circuit. (25 pts)
Determine the total current of the circuit. (25 pts) 7. A balanced delta connected load having an impedance of 9 + j12 ohms was connected in
7. A balanced delta connected load having an impedance of 9 + j12 ohms was connected in parallel with a balanced wye connected load having an impedance of 5 - j8.66 ohms and across
parallel with a balanced wye connected load having an impedance of 5 - j8.66 ohms and across a 200 V, 3-phase, 60 Hz source. Determine the total line current. (25 pts)
a 200 V, 3-phase, 60 Hz source. Determine the total line current. (25 pts) 8. The power of a delta connected load was obtained using two-wattmeter method. Wattmeter
8. The power of a delta connected load was obtained using two-wattmeter method. Wattmeter 1 reads 4243 Watts, while Wattmeter 2 reads -1553 Watts. If the line current was measured
1 reads 4243 Watts, while Wattmeter 2 reads -1553 Watts. If the line current was measured as 30 A. Determine the impedance of the load. (20 pts)
as 30 A. Determine the impedance of the load. (20 pts) 9. An unbalanced delta-connected load has the following impedances: Zab = 10 +j10 Ohms, Zbc
9. An unbalanced delta-connected load has the following impedances: Zab = 10 +j10 Ohms, Zbc = 5 + j8.66 Ohms, Zca = 8 – j6 Ohms. If the load was connected across a 200 V, 60 Hz,
= 5 + j8.66 Ohms, Zca = 8 – j6 Ohms. If the load was connected across a 200 V, 60 Hz, balanced source having a phase sequence of ab-bc-ca, determine the total apparent power.
balanced source having a phase sequence of ab-bc-ca, determine the total apparent power. (25 pts)
(25 pts) 10. An unbalanced wye connected load was connected to a 3-phase, 4 – wire circuit producing
10. An unbalanced wye connected load was connected to a 3-phase, 4 – wire circuit producing the line currents of : Ian = 10 cis (-36.870) A, Ibn = 10 cis 900 A, and
the line currents of : Ian = 10 cis (-36.870) A, Ibn = 10 cis 900 A, and Icn = 10 cis (-600). Determine the symmetrical components of line current, Ibn. (30 pts)
Icn = 10 cis (-600). Determine the symmetrical components of line current, Ibn. (30 pts)