Scribd Logo
Upload

Welcome to Scribd!

  • 100 views

    Inspection & Test Plan Revision: 0 Project: Owner: Location: Contract/PO No.: Engineer(s) : QA/QC Phase: Structural Steel

    Uploaded by

    metroroad
    This document provides an inspection and test plan for structural steel fabrication. It outlines 22 items to be inspected or tested at various intervals, including reviewing engineering drawings, verifying materials and welding procedures, conducting daily visual inspections and tests, and producing as-built drawings and records upon completion. Inspections and tests are to be performed to standards such as CSA W47/W59 and project specifications. The purpose is to ensure structural steel is fabricated according to approved drawings and specifications.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd

    Inspection & Test Plan Revision: 0 Project: Owner: Location: Contract/PO No.: Engineer(s) : QA/QC Phase: Structural Steel

    Uploaded by

    metroroad
    100 views2 pages
    This document provides an inspection and test plan for structural steel fabrication. It outlines 22 items to be inspected or tested at various intervals, including reviewing engineering drawings, verifying materials and welding procedures, conducting daily visual inspections and tests, and producing as-built drawings and records upon completion. Inspections and tests are to be performed to standards such as CSA W47/W59 and project specifications. The purpose is to ensure structural steel is fabricated according to approved drawings and specifications.

    Original Title

    Structrual Steel ITP.doc

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides an inspection and test plan for structural steel fabrication. It outlines 22 items to be inspected or tested at various intervals, including reviewing engineering drawings, verifying materials and welding procedures, conducting daily visual inspections and tests, and producing as-built drawings and records upon completion. Inspections and tests are to be performed to standards such as CSA W47/W59 and project specifications. The purpose is to ensure structural steel is fabricated according to approved drawings and specifications.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    100 views2 pages

    Inspection & Test Plan Revision: 0 Project: Owner: Location: Contract/PO No.: Engineer(s) : QA/QC Phase: Structural Steel

    Uploaded by

    metroroad
    This document provides an inspection and test plan for structural steel fabrication. It outlines 22 items to be inspected or tested at various intervals, including reviewing engineering drawings, verifying materials and welding procedures, conducting daily visual inspections and tests, and producing as-built drawings and records upon completion. Inspections and tests are to be performed to standards such as CSA W47/W59 and project specifications. The purpose is to ensure structural steel is fabricated according to approved drawings and specifications.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 2

    Structural Steel - Inspection & Test Plan - Standard Format - Sample

    INSPECTION & TEST PLAN Revision: 0


    Project: Owner:
    Location: Contract/PO
    No.:
    Engineer(s): QA/QC Phase: Structural Steel

    Vendor Owner Rep.


    Descriptio Acceptance Interva Vendor Owner
    Characteristics V H R W V H R W Date Date
    n Criteria l Inspector Rep.
    Engineering Review Engineered Drawings CISC S16.1 – Once -
    1 Statically Loaded
    - Structural Or on
    Structures
    Revision
    Fabrication Verify Approved for CSA W47/W59 Once
    2
    Construction Drawings
    Fabrication Verify Owner Inspector CSA W47/W59 Once
    3
    Contact Information
    Fabrication Pre-Fabrication Meeting CSA W47/W59 Once
    4
    Fabrication Review and Confirm CSA W47/W59 Once
    5
    Certification to CSA W47 /
    W59
    Fabrication Review WPS (as required) for CSA W47/W59 As
    6
    Submission, Acceptance and Required
    Conformance
    Fabrication Review Welder Log c/w CSA W47/W59 Once
    7
    Welder Qualifications
    Fabrication Review Vendor Quality CSA W47/W59 Once
    8
    Manual & Procedures
    Fabrication Verify Acceptance to Proceed CSA W47/W59 Once
    9
    with Fabrication
    Fabrication Review Material Receiving CSA W47/W59 As
    10
    Reports Required
    Fabrication Audit Welding, Audit CSA W47/W59 Daily
    11
    Fabrication & Conformance
    with Quality Manual
    Fabrication Audit Fabrication Drawing CSA W47/W59 Weekly
    12
    Revision Control
    Fabrication Non-Destructive Examination CSA W47/W59 – Daily
    13 Vendor QA Std.,
    – 100% Visual Project Spec.
    Fabrication Non-Destructive Examination CSA W47/W59 – Daily
    14 Vendor QA Std.,
    – Dimensional Project Spec.
    Fabrication Non-Destructive Examination CSA W47/W59 – As
    15 Statically Loaded
    – MT/PT/RT/UT per contract Required
    Structures, Project
    and Code Requirements Spec.
    Fabrication Material Test Reports – CSA W47/W59, As
    16 Project Spec.
    Review and Verify Required
    Compliance with Code and
    Project Specifications
    Fabrication Review Non-Conformance & CSA W47/W59 Weekly
    17
    Non-Conformance Log

    Vendor Owner Rep.

    Sample Inspection & Test Plan – Structural Steel


    Structural Steel
    Inspection & Test Plan
    Standard Format - Sample

    Descriptio Acceptance Interva Vendor Owner


    Characteristics V H R W V H R W Date Date
    n Criteria l Inspector Rep.
    Review & Confirm Specifications for NACE / SSPC Once
    18 Paint and Surface Preparation

    Coatings
    Verify Surface Preparation and NDT NACE / SSPC Weekly
    Records

    Verify Coating Application and NDT NACE Weekly


    Records

    Review Coating Records for NACE Once


    Conformance with Code & Project &
    Paint Specifications
    Fabrication Review Non-Conformances NACE / W47/W59 Once
    19
    and Verify Closed with
    Complete Disposition &
    Sign-Off
    Fabrication As-Built Red Line Drawings Project Spec. Once
    20
    Manufacturer’s Record BookMRB

    Inspection & Test Plan


    21 Project Spec. Once
    Company Certification Project Spec. Once
    Approved WPS Summary c/w Weld
    Procedures
    Project Spec. Once
    Weld Procedure Log Project Spec. Once
    Material Receiving Reports Project Spec. Once
    Fabricator’s Written Statement of Project Spec. Once
    Material Compliance & Spec
    Fabrication Inspection Reports Project Spec. Once
    NDE Reports - (RT,MT,PT,UT, VT) Project Spec. Once
    NDE Reports – Coating (DFT, SSPC) Project Spec. Once
    Non-Conformance Log Project Spec. Once
    Completed and Signed Non- Project Spec. Once
    Conformances
    Acceptance & Release Forms c/w Project Spec. Once
    Deficiencies if Any
    Complete Set of As-Built Red-Lined Project Spec. Once
    Fabrication Drawings

    Final Inspection Release & MRB Project Spec., Once


    22 NACE, CWB
    Inspection Review W47/W59

    Intervals: Daily, Bi-Weekly, Weekly, Monthly, Once, Ongoing, As Required


    V = Verify, H = Hold, R = Review, W= Witness

    You might also like