7/23/2019 The OSI Reference Model

The OSI Reference Model

The Open Systems Interconnection (OSI) reference model was developed by the
International Standards Organisation (ISO) as a model for computer communications
architectures, and as a framework for developing protocol standards. It was intended
as a rst step towards international standardisation of communications protocols. The
model divides the communication process into seven layers, as shown below. The
diagram shows how communication takes place indirectly between peer layers at each
end of a communications channel (denoted by the bi-directional horizontal arrows),
and clearly identi es the concept of an interface between adjacent layers (denoted by
the bi-directional vertical arrows).

The OSI Reference Model

www.technologyuk.net/telecommunications/telecom-principles/osi-reference-model.shtml 1/5
7/23/2019 The OSI Reference Model

The OSI Reference Model layers

The model starts at the bottom with the physical layer (layer 1), and ends at the top
with the application layer (layer 7). The most important concept behind the model is
that each layer performs a speci c function, provides services to the layer above it, and
uses the services of the layer below it. There is a well-de ned interface between each
layer, across which the ow of information is kept deliberately minimal. It should be
remembered that the OSI model itself is not a communications architecture. It simply
speci es what each layer should do, not how this is to be achieved. As shown above,
protocols in the same layer at each end of the communications link can communicate
with each other only indirectly, by using the services of the layers below them. The
individual layers of the OSI Reference Model are summarised below:

Physical layer - concerned with the physical transmission of a bit stream. Issues
include the physical and electrical characteristics of the cables and connections,
the encoding and signalling schemes used, and the mechanical, electrical and
procedural interfaces. Network devices that operate at this layer include hubs and
repeaters.

Data link layer - the point at which the bit stream enters or leaves the physical
layer, and which provides reliable transmission of data across any single network
link, including sequencing, flow control and error detection, using hardware
addresses. It often defines how devices are connected in terms of the network
topology, and how they may access the physical medium. The data link Layer is
divided into the logical link control (LLC) sub-layer, which manages the
communications link between two devices, and the medium access control (MAC)
sub-layer, which manages protocol access to the transmission medium. Network
devices that operate at this layer include bridges and switches. Ethernet is an
example of a data link layer protocol.

Network layer - controls the operation of the subnet, and is responsible for the
routing and addressing of datagrams (packets) from one network to another using
logical addresses (e.g. IP addresses). The most important network devices that
operate at this layer are routers. Network layer protocols include the Internet
Protocol (IP).

www.technologyuk.net/telecommunications/telecom-principles/osi-reference-model.shtml 2/5
7/23/2019 The OSI Reference Model

Transport layer - establishes and terminates connections across the network, and
provides a reliable end-to-end transport mechanism for the exchange of data
between processes in different end systems. It undertakes flow control, and
ensures that data is delivered error-free and in sequence, with no loss or
duplication. Typical protocols used at this layer include Transmission Control
Protocol (TCP) and User Datagram Protocol (UDP).

Session layer - enables applications on end systems to establish a connection,

and provides the mechanism for controlling the dialogue between them.

Presentation layer - resolves differences in data representation between end

systems and encodes data in a standard format for transmission across the
network. May also be responsible for providing services such as encryption and
data compression.

Application layer - contains management functions and mechanisms to support

distributed applications. Typical protocols used at this layer are File Transfer
Protocol (FTP) and the various e-mail protocols.

www.technologyuk.net/telecommunications/telecom-principles/osi-reference-model.shtml 3/5
7/23/2019 The OSI Reference Model

Data transmission in the OSI model

A process wishing to send data to a process on a remote host passes the data to the
application layer protocol, which attaches the appropriate control information (in the
form of a header) to the data, creating an application layer protocol data unit (PDU)
which is then passed down to the presentation layer. The presentation layer sees the
PDU simply as a block of data to be processed. It may transform the PDU in some way,
adds its own header, and passes the resulting PDU to the session layer. This process is
repeated until the data reaches the physical layer and is transmitted on the physical
transmission medium. At the destination host, the protocol operating at each layer
reads the control information for that layer, strips off the header, and passes the
resulting block of data up to the next layer. Finally, the original data, stripped of all
control information, is passed to the target process. This sequence of events is
illustrated below.

Data transmission in the OSI Reference Model

www.technologyuk.net/telecommunications/telecom-principles/osi-reference-model.shtml 4/5
7/23/2019 The OSI Reference Model

Advantages and disadvantages of the OSI model

A major advantage of the OSI model is that it clearly distinguishes between the
concepts of services, interfaces and protocols. A strictly modular approach to the
design of system architecture is encouraged, allowing the protocols operating within
each layer to be replaced relatively easily. The purely theoretical basis for the model
means that it is not biased towards a particular technological approach, and makes it
very useful as a reference model, although it also means that the model does not
bene t from practical experience, as a result of which some fairly arbitrary decisions
have been made about what functionality should go into each layer. The session and
presentation layers, for example, do not actually do a great deal, whereas the data-link
layer has had to be divided into two distinct sub-layers (LLC and MAC). The
shortcomings of the OSI model, together with the success of the TCP/IP protocol stack,
contributed to the lack of success of subsequent attempts to implement a protocol
stack based on the OSI model. That said, the OSI model has proved an extremely useful
tool for facilitating the discussion of network architectures.

www.technologyuk.net/telecommunications/telecom-principles/osi-reference-model.shtml 5/5