Scribd Logo
Upload

Welcome to Scribd!

  • 21 views

    LS81X Dual Aviation Obstruction Light

    Uploaded by

    Marco Antonio Blanco Martinez
    This document provides information about the LS81X Dual aviation obstruction light. It can be used for aircraft warning applications on towers, smokestacks, buildings, bridges and other structures. The light uses LED technology and a Fresnel lens for high efficiency and light output. It has a 360 degree horizontal beam, IP65 weatherproof rating, and flashing rates adjustable between 30-60 FPM or steady burning. The unit can operate from AC, DC 48V or DC 12V power sources. Installation involves screwing the light onto a G3/4" pipe and connecting power according to wiring diagrams. Settings like flashing rate or dual/single light mode can be adjusted by opening the housing and moving switches.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    LS81X Dual Aviation Obstruction Light

    Uploaded by

    Marco Antonio Blanco Martinez
    21 views2 pages
    This document provides information about the LS81X Dual aviation obstruction light. It can be used for aircraft warning applications on towers, smokestacks, buildings, bridges and other structures. The light uses LED technology and a Fresnel lens for high efficiency and light output. It has a 360 degree horizontal beam, IP65 weatherproof rating, and flashing rates adjustable between 30-60 FPM or steady burning. The unit can operate from AC, DC 48V or DC 12V power sources. Installation involves screwing the light onto a G3/4" pipe and connecting power according to wiring diagrams. Settings like flashing rate or dual/single light mode can be adjusted by opening the housing and moving switches.

    Original Description:

    Luces de balizaje para torres de telecomunicaciones

    Original Title

    LS81X -E1-V10_N

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information about the LS81X Dual aviation obstruction light. It can be used for aircraft warning applications on towers, smokestacks, buildings, bridges and other structures. The light uses LED technology and a Fresnel lens for high efficiency and light output. It has a 360 degree horizontal beam, IP65 weatherproof rating, and flashing rates adjustable between 30-60 FPM or steady burning. The unit can operate from AC, DC 48V or DC 12V power sources. Installation involves screwing the light onto a G3/4" pipe and connecting power according to wiring diagrams. Settings like flashing rate or dual/single light mode can be adjusted by opening the housing and moving switches.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    21 views2 pages

    LS81X Dual Aviation Obstruction Light

    Uploaded by

    Marco Antonio Blanco Martinez
    This document provides information about the LS81X Dual aviation obstruction light. It can be used for aircraft warning applications on towers, smokestacks, buildings, bridges and other structures. The light uses LED technology and a Fresnel lens for high efficiency and light output. It has a 360 degree horizontal beam, IP65 weatherproof rating, and flashing rates adjustable between 30-60 FPM or steady burning. The unit can operate from AC, DC 48V or DC 12V power sources. Installation involves screwing the light onto a G3/4" pipe and connecting power according to wiring diagrams. Settings like flashing rate or dual/single light mode can be adjusted by opening the housing and moving switches.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    LS81X Dual aviation obstruction light LS81X-E1-V10

    Applications
    Applying to tower(power transportation, telecom, GSM), smokestacks(power plant, coking plant,
    chemical plant), high buildings, bridge, harbor machinery, construction machinery, wind turbine etc
    for aircraft warning.

    Main functions and features


    • Use Fresnel lens, high utilization of light, valid keeping light beam in the scope as required.
    • Based on LED technology, low power consumption, and high efficiency.
    • Lamp housing is with bird spike. Its material is polycarbonate, good at anti-impact strength,
    thermal stability, fire resistance..
    • Basing is aluminum alloy. It is light weight and corrosion resistance.
    • G3/4”pipe is available for installation, easy for mounting.
    • Self- contained compartment, with stainless steel wire which is used to secure the unit
    against falling in operation.
    • Built-in micro monitoring controller unit. When and if service light fails , the controller
    Installation dimension（mm） switch on the standby light automatically.
    • Photocell control function(optional).
    • Failure warning output function(optional).
    • Extremely reliable, maintenance cost saving.

    Specification
    Compliant to the
    Standard ICAO(Aerodromes Annex 14) Vertical degree ≥10°
    and FAA-L810
    Light source High luminance LED Horizontal degree 360°
    30FPM/40FPM/60F
    Wiring diagram red（other color can be PM/ steady
    Light color Flashing rate
    AC110-240V wiring customized） burning can be
    adjusted
    Operating
    AC110-240V/DC48V/DC12V Flashing duration 150±20ms
    voltage

    Power
    4W LED lifetime ≥100,000h
    consumption

    DC48V/DC12V wiring Intensity ≥32.5cd Photocell on/off level 500±50Lux

    Operating
    -40˚C ~ +70˚C IP protection IP65
    temperature

    Relative
    10% ~ 95% (no condensing） Weight 2.2kg
    Remarks：For customized product,please humidity

    make object as standard. Body：aluminum alloy


    Material
    Housing：PC

    Installation and operation


    • Please check the supply voltage does comply with rated voltage of the lamp.
    • Screw the lamp on G3/4’pipe of mounting bracket, which should be fixed on a smooth surface
    with enough mechanical strength. Or you can select our mounting bracket: PJ024, PJ005. Note
    that installation is fixed and reliable, so as not to fall.

    1/2
    LS81X Dual aviation obstruction light LS81X-E1-V10
    Flashing rate adjustment:
    • If the lamp is with photocell, please do not put photocell direct to nearby light. Meanwhile
    AC110-240V
    ensure that the photocell is not obstructed by nearby object.
    • Open the connection box and connect the power wire, signal wire according to marking.
    Then remount the connection box.
    • Switch on the power after check up. The light begins to work.

    Adjustment of flashing rate


    • Switch off the power.
    • Unscrew the screws of housing and base.
    • The flashing rate and adjusted code, please see as following:

    1=ON,2=ON 1=OFF,2=ON 1=ON,2=OFF 1=OFF,2=OFF


    DC48V/DC12V
    30FPM 40FPM 60FPM Steady
    SWITCH
    • Screw the screws of housing and base.
    • Power on, the light will work as your setting.
    1 2

    S1
    ON

    Dual light/Two lights switchover


    AC110-240V :
    • Switch off the power.
    • The work model and adjusted code, please see as following:

    Dual light/two light switchover

    ON

    1 2

    1=OFF,2=OFF：Work model is in dual light way (Lead light + standby light. When and if
    lead light fails, standby light will switch on automatically.)

    1=ON,2=OFF：Work model is in two lights way. (Two lights work at the same time)
    Application
    • Power on, the light will work as your setting.
    DC48V/DC12V:
    • Switch off the power.
    • Switch to SWITCH condition, and the corresponding woke mode as below:
    SWITCH without jumper cap connect：the dual lights work with one host and the other one
    standby.
    SWITCH with jumper cat connect: the dual lights work together.
    • After cable connected well and close the junction box, power on, then lamp can be work
    normally.

    Notice
    •When the lamp works, temperature rising is normal phenomenon.
    •Please do not open any components except professional serviceman.
    •The product is a sealed structure. Do not be tampered by anyone other than registered
    installer.

    2/2

    You might also like