Scribd
Upload
397 views

Control Systems Multiple Choice Questions and Answers - April 2016

This document provides 40 multiple choice questions and answers about control systems. It covers topics like open loop vs closed loop systems, stability, feedback, transient response, and components of control systems like sensors, controllers, and final control elements. The questions are designed to help with exam preparation for control systems competitions.

Uploaded by

Ree Ismael Halasan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
397 views

Control Systems Multiple Choice Questions and Answers - April 2016

This document provides 40 multiple choice questions and answers about control systems. It covers topics like open loop vs closed loop systems, stability, feedback, transient response, and components of control systems like sensors, controllers, and final control elements. The questions are designed to help with exam preparation for control systems competitions.

Uploaded by

Ree Ismael Halasan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

Control Systems Multiple Choice Questions and Answers

Preparation for Competition exams

1. In an open loop control system


(a) Output is independent of control input
(b) Output is dependent on control input
(c) Only system parameters have effect on the control output
(d) None of the above
Ans: a

2. For open control system which of the following statements is incorrect ?


(a) Less expensive
(b) Recalibration is not required for maintaining the required quality of the output
(c) Construction is simple and maintenance easy
(d) Errors are caused by disturbances
Ans: b

3. A control system in which the control action is somehow dependent on the output is
known as
(a) Closed loop system
(b) Semiclosed loop system
(c) Open system
(d) None
Ans: a

4. In closed loop control system, with positive value of feedback gain the overall gain of
the system will
(a) decrease
(b) increase
(c) be unaffected
(d) any of the above
Ans: a

5. Which of the following is an open loop control system ?


(a) Field controlled D.C. motor
(b) Ward leonard control
(c) Metadyne
(d) Stroboscope
Ans: a
6. Which of the following statements is not necessarily correct for open control system?
(a) Input command is the sole factor responsible for providing the control action
(b) Presence of nonlinearities causes malfunctioning
(c) Less expensive
(d) Generally free from problems of nonlinearities
Ans: b

7. In open loop system


(a) the control action depends on the size of the system
(b) the control action depends on system variables
(c) the control action depends on the input signal
(d) the control action is independent of the output
Ans: d

8 has tendency to oscillate.


(a) Open loop system
(b) Closed loop system
(c) Both (a) and (b)
(d) Neither (a) nor (b)
Ans: b

9. A good control system has all the following features except


(a) good stability
(b) slow response
(c) good accuracy
(d) sufficient power handling capacity
Ans: b

10. A car is running at a constant speed of 50 km/h, which of the following is the
feedback element for the driver?
(a) Clutch
(b) Eyes
(c) Needle of the speedometer
(d) Steering wheel
(e) None of the above
Ans: c

11. The initial response when the output is not equal to input is called
(a) Transient response
(b) Error response
(c) Dynamic response
(d) Either of the above
Ans: a
12. A control system working under unknown random actions is called
(a) computer control system
(b) digital data system
(c) stochastic control system
(d) adaptive control system
Ans: c
13. An automatic toaster is a ______ loop control system.
(a) open
(b) closed
(c) partially closed
(d) any of the above
Ans: a

14. Any externally introduced signal affecting the controlled output is called a
(a) feedback
(b) stimulus
(c) signal
(d) gain control
Ans: b

15. A closed loop system is distinguished from open loop system by which of the
following ?
(a) Servomechanism
(b) Feedback
(c) Output pattern
(d) Input pattern
Ans: b

16 is a part of the human temperature control system.


(a) Digestive system
(b) Perspiration system
(c) Ear
(d) Leg movement
Ans: b

17. By which of the following the control action is determined when a man walks along a
path ?
(a) Brain
(b) Hands
(c) Legs
(d) Eyes
Ans: d
18 is a closed loop system.
(a) Autopilot for an aircraft
(6) Direct current generator
(c) Car starter
(d) Electric switch
Ans: a

19. Which of the following devices are commonly used as error detectors in
instruments?
(a) Vernistats
(b) Microsyns
(c) Resolvers
(d) Any of the above
Ans: d

20. Which of the following should be done to make an unstable system stable?
(a) The gain of the system should be decreased
(b) The gain of the system should be increased
(c) The number of poles to the loop transfer function should be increased
(d) The number of zeros to the loop transfer function should be increased
Ans: b

21 increases the steady state accuracy.


(a) Integrator
(b) Differentiator
(c) Phase lead compensator
(d) Phase lag compensator
Ans: a

22. A.C. servomotor resembles


(a) two phase induction motor
(b) Three phase induction motor
(c) direct current series motor
(d) universal motor
Ans: a

23. As a result of introduction of negative feedback which of the following will not
decrease?
(a) Band width
(b) Overall gain
(c) Distortion
(d) Instability
Ans: a
24. Regenerative feedback implies feedback with
(a) oscillations
(b) step input
(c) negative sign
(d) positive sign
Ans: d

25. The output of a feedback control system must be a function of


(a) reference and output
(b) reference and input
(e) input and feedback signal
(d) output and feedback signal
Ans: a

26 is an open loop control system.


(a) Ward Leonard control
(b) Field controlled D.C. motor
(c) Stroboscope
(d) Metadyne
Ans: b

27. A control system with excessive noise, is likely to suffer from


(a) saturation in amplifying stages
(b) loss of gain
(c) vibrations
(d) oscillations
Ans: a

28. Zero initial condition for a system means


(a) input reference signal is zero
(b) zero stored energy
(c) no initial movement of moving parts
(d) system is at rest and no energy is stored in any of its components
Ans: d

29. Transfer function of a system is used to calculate which of the following?


(a) The order of the system
(b) The time constant
(c) The output for any given input
(d) The steady state gain
Ans: c
30. The band width, in a feedback amplifier.
(a) remains unaffected
(b) decreases by the same amount as the gain increase
(c) increases by the same amount as the gain decrease
(d) decreases by the same amount as the gain decrease
Ans: c

31. On which of the following factors does the sensitivity of a closed loop system to gain
changes and load disturbances depend ?
(a) Frequency
(b) Loop gain
(c) Forward gain
(d) All of the above
Ans: d

32. The transient response, with feedback system,


(a) rises slowly
(b) rises quickly
(c) decays slowly
(d) decays quickly
Ans: d

33. The second derivative input signals modify which of the following?
(a) The time constant of the system
(b) Damping of the system
(c) The gain of the system
(d) The time constant and suppress the oscillations
(e) None of the above
Ans: d

34. Which of the following statements is correct for any closed loop system?
(a) All the coefficients can have zero value
(6) All the coefficients are always nonzero
(c) Only one of the static error coefficients has a finite non zero value
(d) None of the above
Ans: c

35. Which of the following statements is correct for a system with gain margin close to
unity or a phase margin close to zero ?
(a) The system is relatively stable
(b) The system is highly stable
(c) The system is highly oscillatory
(d) None of the above
Ans: c
36. Due to which of the following reasons excessive bond width in control systems
should be avoided ?
(a) It leads to slow speed of response
(b) It leads to low relative stability
(c) Noise is proportional to band width
(d) None of the above
Ans: c

37. In a stable control system backlash can cause which of the following?
(a) Underdamping
(b) Overdamping
(c) Poor stability at reduced values of open loop gain
(d) Low level oscillations
Ans: d

38. In an automatic control system which of the following elements is not used?
(a) Error detector
(b) Final control element
(c) Sensor
(d) Oscillator
Ans: d

39. In a control system the output of the controller is given to


(a) final control element
(b) amplifier
(c) comparator
(d) sensor
(e) none of the above
Ans: a

40. A controller, essentially, is a


(a) sensor
(b) clipper
(c) comparator
(d) amplifier
Ans: c

You might also like