Scribd
Upload
98 views4 pages

Vulcain 201T Sensor

The Vulcain 201T gas detection transmitter is designed to safely and reliably detect a wide range of toxic and explosive gases through standalone or networked configuration. It uses proven sensing technologies including electrochemical cells and catalytic sensors to detect over 100 gases. The transmitter can interface with the Vulcain 301C controller via RS-485 Modbus and includes optional outputs like 4-20mA and alarm relays.

Uploaded by

Paky Pakic
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
98 views4 pages

Vulcain 201T Sensor

The Vulcain 201T gas detection transmitter is designed to safely and reliably detect a wide range of toxic and explosive gases through standalone or networked configuration. It uses proven sensing technologies including electrochemical cells and catalytic sensors to detect over 100 gases. The transmitter can interface with the Vulcain 301C controller via RS-485 Modbus and includes optional outputs like 4-20mA and alarm relays.

Uploaded by

Paky Pakic
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Vulcain 201T

SECONDARY HEADLINE

Protection through stand-alone or


network configuration
Vulcain 201T
gas detection
transmitter

User Friendly
• 10-step LED display
The Vulcain 201T gas detection
• Proven sensing technology
• Easy installation and operation transmitter is designed to meet or
Reliability exceed safety requirements in a variety of
• Field-proven protection
• Robust RS-485 Modbus communication commercial and industrial applications.
Versatility
• Stand-alone or network configuration
• Full compatibility with the Vulcain 301C controller

Original Architecture
• Innovative and compact case design

Beneficial Options
• Optional 4-20 mA and one relay output
• Optional audible alarm and LCD display

The Vulcain 201T series transmitters are able to The catalytic sensors of the Vulcain 201T can be
detect a wide range of toxic and explosive gasses. used to detect hundreds of different gasses and
The Vulcain 201T gas detection transmitter can inflammable vapour concentrations. Toxic gasses
work in an addressable network mode with the are detected by way of electrochemical cells, while
Vulcain 301C controller through an RS-485 Modbus metal-air battery cells are used to detect oxygen.
link. They can also be used in a stand-alone Moreover, a second generation of semi-conductor
configuration with an optional 4-20mA or alarm detectors offer a highly effective solution for a variety
relay outputs. of different applications.
Technical summary

General Specification

Uses Work horse transmitter of a gas detection network to be used with the 301C controller providing a cost-effective solution to gas related hazards and energy management

Power Requirement 17-27 Vac, 24-38 Vdc, 250 mA

Size 8.4 x 5.3 x 2.25 in. (21.3 x 13.4 x 5.7 cm)

Weight 0.88 lb (0.4kg)

Display 10-step LED or LCD

Visual Indicators Failure Indication: Yellow LED (Available in network configuration only)
Normal Operation: Green LED

Relay Output Rating 5A, 30Vdc or 250 Vac (resistive load)

Audible Alarm 65 dBA at 3 ft. / 1 m

Optional Outputs RS-485 Modbus, 4-20mA, Alarm relay


Sensing Technology

Q1-type Sensor Toxic: Electrochemical


Combustibles: Catalytic
Oxygen: Diffusion fuel cell

Q2-type Sensor Refrigerants: Solid-state


Carbon Monoxide: Electrochemical

Detection Gas Detected Detection Range Accuracy Operating Humidity Range Operating Temperature Range

Q1 Q2 Q1 Q2 Q1 Q2 Q1 Q2

Carbon Monoxide (CO) 0-50 ppm 0-250 ppm +/- 3% +/- 5% 0 - 90% RH 10 - 95% RH -4 to 122°F -4 to 122°F
0-100 ppm non-condensing non-condensing (-20 to +50°C) (-20 to +50°C)
0-250 ppm (std)
0-500 ppm

Nitrogen Dioxide (NO2) 0-10 ppm — +/- 3% — 15 - 90% RH, — -22 to 122°F —
continuous (-30 to +50°C)

Oxygen (O2) 0-1 ppm — +/- 3% — 5 - 95% RH — -4 to 131°F —


continuous (-20 to +55°C)

Combustibles 0-100% LEL 0-100% LEL +/- 3% +/- 5% — 0 - 95% RH, — 14 to 104°F
non-condensing (-10 to +40°C)

Refrigerants (R11, R12, — 0-2000 ppm — +/- 10% — 40 - 100% RH — 32 to 122°F


R22 and R134a) (N/A for R123) non-condensing (0 to +50°C)
Ratings and Certifications:

Certified to CAN/CSA C22.2 No. 61010-1


116662

Conforms to ANSI/UL 61010-1


As world leaders in gas detection solutions, Honeywell Analytics’ Vulcain
range of gas detection systems has been designed to provide efficient,
practical and cost-effective equipment to protect people from a variety
of forms of hazardous gases and to efficiently monitor and control indoor
air quality. The equipment is also extremely simple to install and easy to
operate and maintain.

The Vulcain range of fixed gas detection and air monitors

Vulcain 301RLC GasPoint II Vulcain 201T Vulcain 301W Vulcain 301C Vulcain 301EM

Vulcain Sensors Vulcain Controllers


From refrigerants to toxic and combustible gases, Honeywell Analytic’s Vulcain line has a sensor designed for any industrial or commercial Designed for industrial or commercial use, the Vulcain 301C monitors
application. With award winning sensor technology, this line of sensors is the answer to any fixed HVAC, IAQ or gas detection concerns. and controls toxic gases, combustible gases and oxygen hazards.
With the same simple installation and operation and flexibility as the
Vulcain 301C, the Vulcain 301EM is specifically designed to fulfil the
Find out more requirements of a mechanical room.
For more information on Honeywell
Analytic’s Vulcain line of products, visit
www.honeywellanalytics.com or contact
us at 800 563 2967

Customer business center


Canada
Honeywell Analytics
Vulcain 301M
4005 Matte Blvd., Unit G
Brossard, QC, Canada
Stand-Alone Dual Gas Monitor
J4Y 2P4 For applications where gas detection is only needed at one or two
Toll free: +1 800 563 2967 points, the Vulcain 301M offers a simple solution. While continually
Tel: +1 450 619 2450 monitoring for CO, a remote sensor can also be integrated to
detect CO, NO2, propane, hydrogen or methane with a remote
Fax: + 1 888 967 9938
sensor that can be place up to 200’ away.
[email protected]
www.honeywell.com

Customer business center


USA, Central and South America
Honeywell Analytics
Suite 100
400 Sawgrass Corporate Parkway
Sunrise, FL Vulcain 90DM4
33325
Tel: +1 954 514 2700 Commercial CO2 Detection
Toll free: +1 800 538 0363 Using proven infrared dual sensing technology to detect carbon
Fax: +1 954 514 2784 dioxide (CO2) the Vulcain 90DM4 can be either wall or duct
mounted to monitor CO2 levels in you commercial environment.
[email protected]
www.honeywell.com

Customer business centre


Europe and the rest of the world
Honeywell Analytics
Wilstrasse 11-U11
CH-8610 Uster
Switzerland
Tel: +41 (0) 44 943 4300
Fax: +41 (0)44 943 4398
H_201T_DS01002_V1
[email protected] September 2006
www.honeywell.com ©2006 Honeywell Analytics

You might also like