Scribd
Upload
58 views8 pages

Disassembly & Reassembly

The document provides instructions for disassembling and reassembling a plasma display panel (PDP) television. It describes removing components in the reverse order they were installed, including covers, boards, brackets, filters and more. Special precautions are outlined, such as discharging capacitors before handling boards and laying the PDP face down on a soft surface during repairs.

Uploaded by

Venera Segunda Mano
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
58 views8 pages

Disassembly & Reassembly

The document provides instructions for disassembling and reassembling a plasma display panel (PDP) television. It describes removing components in the reverse order they were installed, including covers, boards, brackets, filters and more. Special precautions are outlined, such as discharging capacitors before handling boards and laying the PDP face down on a soft surface during repairs.

Uploaded by

Venera Segunda Mano
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

Disassembly & Reassembly

3. Disassembly & Reassembly


3-1 Overall Disassembly & Reassembly

! Notice
- Be sure to separate the power cord before disassembling the unit.
- Discharge the capacitors first when separating PCB's with high capacity capacitors such as SMPS, X Main Board, Y Main
Board, etc. (A spark may be generated by the electric charge, and there is danger of electronic shock.)
- Check that the cables are properly connected referring to the circuit diagram when disassembling or assembling the unit
taking care not to damage the cables.
- Take care not to scratch the Glass Filter in the front.
- Assemble the boards in the reverse order of the disassembly.
- The plasma must be layed down on a flat padded surface for disassembly and reassembly.

3-1-1 Separation of ASSY COVER P-REAR


Part Name Description Description Photo
Cover ① Remove 17 screws. ( )
Rear : BH,+,B,M4,L3,ZPC(BLK)

② Remove 6 screws. ( )
: PH,+,WSP,S,M4,L35,ZPC(BLK)

③ Remove the rear cover.

! : Please lay the PDP unit face down on a


soft surface when removing the stand.

3-1-2 Separation of ASSY PCB MISC-MAIN


Part Name Description Description Photo
Main ① Detach all connectors from the Main
Board Board.

② Remove 4 screws.
: PH,+,WWP,M3,L8,NI PLT

③ Remove the Main Board.

Samsung Electronics 3-1


Disassembly & Reassembly

3-1-3 Separation of FILTER-EMI AC LINE


Part Name Description Description Photo
FILTER- ① Detach connector from SMPS.
EMI
AC LINE ② Remove 2 screw. ( )
: PH,+,WWP,M3,L8,NI PLT

③ Remove 1 screws.( )
: BH,+,S,M4,L10,ZPC(BLK)

④ Separate FILTER-EMI AC LINE from


bracket.

3-1-4 Separation of BRACKET-PCB


Part Name Description Description Photo
Bracket ① Remove screw.( )
PCB : BH,+,B,M4,L3,ZPC(BLK)

② Remove the BRACKET-PCB.

3-1-5 Separation of ASSY BRACKET


Part Name Description Description Photo
Bracket ① Remove 2 screws. ( )
: BH,+,PT,S Tite,M4,L10,ZPC(BLK)

② Remove 2 screws. ( )
: BH,+,B,M4,L3,ZPC(BLK)

③ Remove Bracket.

3-2 Samsung Electronics


Disassembly & Reassembly

3-1-6 Separation of ASSY BRACKET P-WALL


Part Name Description Description Photo
Wall ① Remove 2 screws. ( )
Bracket : BH,+,B,M4,L3,ZPC(BLK)

② Remove 4 screws. ( )
: BH,+,S,M4,L10,ZPC(BLK)

③ Remove Wall Bracket.

! : Please lay the PDP panel face down


on a soft surface when separating front
cover.

3-1-7 Separation of ASSY SPEAKER P


Part Name Description Description Photo
Speaker ① Remove 4 screws.( )
: BH,+,WP,B,M4.0,L3,ZPC(BLK),
SWRCH18A

② Remove the Speaker.

3-1-8 Separation of SMPS-PDP TV


Part Name Description Description Photo
SMPS ① Detach all connectors from the SMPS.

② Remove 6 screws.
: PH,+,WWP,M3,L8,NI PLT

③ Remove the SMPS.

! : Wear gloves when handling the power


board as there may be some remaining
electrical charge in the capacitor.
Specifically, avoid touching any part of
the capacitor.

Samsung Electronics 3-3


Disassembly & Reassembly

3-1-9 Separation of ASSY PDP MODULE P-LOGIC MAIN BOARD


Part Name Description Description Photo
Logic ① Detach all connectors from the Logic
Board Main Board.

② Remove 2 screws.
: WSP,PH,+,M3,L8,NI PLT

③ Remove the Logic Main Board.

3-4 Samsung Electronics


Disassembly & Reassembly

3-1-10 Separation of ASSY PDP MODULE P-X MAIN BOARD


Part Name Description Description Photo
Flat able ① Detach all Connectors from the X Main Board.

※ To separate the Flat Cable of the X-Board, press the


upper and the lower sides of the connector.

! : Pinch the sides, but then push down in the ribbon, it


should slide out after that.

X-Main ① Remove 7 screws.


Board : PH,+,WWP,M3,L8,NI PLT

② Remove the X-Main Board.

X-Main ① Remove the X-Main Board.


Board

Samsung Electronics 3-5


Disassembly & Reassembly

3-1-11 Separation of ASSY PDP MODULE P-Y MAIN BOARD


Part Name Description Description Photo
Flat Cable ① Detach the scan board connectors from the panel .

Y-Scan ① Remove 2 screws.


Board : PH,+,WWP,M3,L8,NI PLT

3-1-12 Separation of ASSY PDP MODULE P-ADDRESS BUFFER BOARD


Part Name Description Description Photo
Buffer ① Remove 3 screws.
board : PH,+,WWP,M3,L8,NI PLT
shield
② Remove the still bar.

▶Before removing the still bar, you should


lift up the panel a little.

3-6 Samsung Electronics


Disassembly & Reassembly

3-1-13 Separation of ASSY PANEL BRACKETS


Part Name Description Description Photo
Panel ① Remove 7 screws. ( )
Brackets : BH,+,B,M4,L3,ZPC(BLK)

② Remove the Side Panel Brackets.

Samsung Electronics 3-7


MEMO

3-8 Samsung Electronics

You might also like