Low Voltage Variable Output LDO Regulator

BA00BC0WFP/WT

Description Dimension (Units : mm)

BA00BC0WFP/WT is a PNP output LDO

BA00BC0WFP
regulator IC with the output current of 1A
and a voltage accuracy of ±2%.

1.5±0.2
6.5±0.2 2.3±0.2

Output voltage can be set (1.5V to 12V) by

+0.2
5.1−0.1 0.5±0.1

2-C0.5

external resistor. Over-current protection

5.5±0.2

9.5±0.5
1 2 3 4 5

1.5
2.5
circuit and thermal protection circuit are

0.8
0.5 1.27 0.5±0.1
1.0±0.2

incorporated to prevent IC from being TO252-5

damaged by short and thermal break down.

BA00BC0WT

+ 0.3 + 0.3
10.0 – 0.1 4.5 – 0.1

1.8 ± 0.2
+ 0.3 + 0.2
7.0 – 0.1 φ 3.2 ± 0.1 2.8 – 0.1
+ 0.4
– 0.2

Features
12.0 ± 0.2
17.0

8.0 ± 0.2
0.7

1) Maximum output current : 1A

0.85 ± 0.2
13.5Min.

1.2

2) Output voltage setting by external resistor 0.8

3) Low drop-out voltage(1.5V to 12V) type with PNP output 1.778 0.5 ± 0.1

4) Built-in over-current protection circuit to 2.85

1 2 3 4 5
prevent IC from being damaged by short
5) Built-in thermal protection circuit for protecting TO220FP-5
thermal break down
6) Built-in ON/OFF switch to realize the shutdown current 0uA
7) TO252-5, TO220FP-5 package
8) C pin output voltage accuracy : ± 2%

Applications

Printer, TV, DVD and Storage etc.

 Absolute Maximum Ratings (Ta=25˚C)
Parameter Symbol Limits Unit
Supply voltage Vcc 18 *1 V
Power dissipation Pd 1300 *2 2000 *3 mW
(TO252-5) (TO220FP-5)
Operating temperature range Topr -40 ~ +105 ˚C
Storage temperature range Tstg -55 ~ +150 ˚C
Junction temperature Tjmax 150 ˚C
*12 Do not however exceed Pd.
*3 Mounted on 70mm x 70mm x 1.6mm glass-epoxy PCB Derating in done at 10.4mW/˚C for operating above Ta=25˚C
* Derating in done at 16mW/˚C for operating above Ta=25˚C

Recommended Operating Conditions (Ta=25˚C)

Parameter Symbol Min. Typ. Max. Unit
Input voltage VCC 3.0 - 16.0 V
Output current *4 Io - - 1 A
Output voltage VOUT 1.5 - 12.0 V
*4 Do not however, Vcc ≥ 3.3V

Electrical Characteristics (Unless otherwise specified, Ta=25˚C, Vcc=3.3V, Io=200mA, R1=30kΩ, R2=30kΩ)
Parameter Symbol Min. Typ. Max. Unit Conditions
Shut down current ISD - 0 10 µA Vctl=0V
Vc pin voltage Vc 1.225 1.250 1.275 V Io=50mA
Output voltage Vo - 2.50 - V Io=200mA
Dropout voltage ∆Vd - 0.3 0.5 V Vcc=3.0V
Peak output current Io 1.0 - - A
Ripple rejection R.R. 44 55 - dB f=120Hz, ein=-20dBV, Io=100mA
Line regulation Reg.I - 15 30 mV Vcc=4.5V → 16V
Load regulation Reg.L - 35 75 mV Io=0mA → 1A
Temperature coefficient of output voltage * Tcvo - ±0.015 - % / °C Io=5mA, Tj=0~125°C
Bias current Ib - 0.5 0.9 mA Io=0mA
Short circuit output current Ios - 0.4 - A Vcc=16V
Stand-by ON level Vth1 2.0 - 16 V ACTIVE MODE, Io=0mA
Stand-by OFF level Vth2 - - 0.8 V OFF MODE, Io=0mA
Input high current Iin 40 80 130 µA Vctl=3V, Io=0mA
• This product is not designed for protection against radioactive rays.
Designed Guarantee.(Outgoing inspection is not done all products.)
* Measurement is done at Ta Tj, and variations in the parameter of all measurement(expect Temperature Coefficient of Output Voltage)caused by temperature change are not considered.

Application Circuit
[BA00BC0WFP] [BA00BC0WT]
BA00BC0WFP BA00BC0WT
Vcc Vcc
2 Vref 2 Vref
OUT OUT
4 4
CTL R2 CTL R2
1 C 1 C
5 5
TSD R1 TSD R1

OCP OCP
GND GND
Fin N.C. 3 3
This datasheet has been download from:

www.datasheetcatalog.com

Datasheets for electronics components.