Scribd Logo
Upload

Welcome to Scribd!

  • 7 views

    Design For Torsion (WSD) : Torsional Effect May Be Neglected

    Uploaded by

    Mostafizur Rahman
    This document summarizes the design of a reinforced concrete member for torsion. The member has a cross section that is 18 inches high and 10 inches wide. It is designed to resist a torsion of 0.57 kip-ft and shear of 3.56 kip-ft. Based on the material properties and cross section dimensions, the torsional effects can be neglected. The concrete shear strength is calculated to be 9.32 kip which exceeds the required shear of 3.56 kip. Stirrups with a diameter of #10 placed at 29.2 inches center to center are sufficient to resist the torsion, as the minimum required spacing of 5.25 inches is satisfied.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd

    Design For Torsion (WSD) : Torsional Effect May Be Neglected

    Uploaded by

    Mostafizur Rahman
    7 views1 page
    This document summarizes the design of a reinforced concrete member for torsion. The member has a cross section that is 18 inches high and 10 inches wide. It is designed to resist a torsion of 0.57 kip-ft and shear of 3.56 kip-ft. Based on the material properties and cross section dimensions, the torsional effects can be neglected. The concrete shear strength is calculated to be 9.32 kip which exceeds the required shear of 3.56 kip. Stirrups with a diameter of #10 placed at 29.2 inches center to center are sufficient to resist the torsion, as the minimum required spacing of 5.25 inches is satisfied.

    Original Description:

    torsion calculation

    Original Title

    torsion

    Copyright

    © © All Rights Reserved

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the design of a reinforced concrete member for torsion. The member has a cross section that is 18 inches high and 10 inches wide. It is designed to resist a torsion of 0.57 kip-ft and shear of 3.56 kip-ft. Based on the material properties and cross section dimensions, the torsional effects can be neglected. The concrete shear strength is calculated to be 9.32 kip which exceeds the required shear of 3.56 kip. Stirrups with a diameter of #10 placed at 29.2 inches center to center are sufficient to resist the torsion, as the minimum required spacing of 5.25 inches is satisfied.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    7 views1 page

    Design For Torsion (WSD) : Torsional Effect May Be Neglected

    Uploaded by

    Mostafizur Rahman
    This document summarizes the design of a reinforced concrete member for torsion. The member has a cross section that is 18 inches high and 10 inches wide. It is designed to resist a torsion of 0.57 kip-ft and shear of 3.56 kip-ft. Based on the material properties and cross section dimensions, the torsional effects can be neglected. The concrete shear strength is calculated to be 9.32 kip which exceeds the required shear of 3.56 kip. Stirrups with a diameter of #10 placed at 29.2 inches center to center are sufficient to resist the torsion, as the minimum required spacing of 5.25 inches is satisfied.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    of 1

    DESIGN FOR TORSION (WSD)

    f'c = 3.5 ksi


    fy = 60 ksi d= 15.5
    x= 10 0
    T = 0.57 kip-ft y= 18 0
    V = 3.56 kip-ft x2y = 1800
    Ct = 0.0861
    h= 18 in. x1 = 6.5
    b= 10 in. y1 = 14.5
    αt = 1.40

    0.275√f'c∑x2y = 2.44 kip-ft > T = 0.57 kip-ft

    Torsional effect may be neglected

    ( 1 .1 √ f ' c ) bw d
    Vc = = 9.32 kip
    √
    2
    T
    (
    1+ 2. 5 C t
    V )
    ( 0. 44 √ f ' c ) ∑ x 2 y
    Tc = = 1.49 kip-ft
    √
    2
    0. 4 V
    1+
    ( Ct T )

    Ts = -0.92 kip-ft < 4Tc = 5.97

    Section size can be provived

    At = -0.002549 s
    Av = -0.012389 s
    2At +Av = -0.017487 s
    or 0.008333 s
    2 Legged ø 10 stirrup @ 29.20 in. c/c
    s min = 5.25

    Al = 2At*(x1+y1)/s = -0.11 in2


    0.29

    You might also like