Introduction 500 IPC
Introduction 500 IPC
-0 (Rev 34)
LIST OF REVISIONS
1. Revisions
A. This Illustrated Parts Catalog includes the original issue and the revisions listed in Table 1. Ensure that information in this
manual is current and the latest maintenance and inspections procedures are available by incorporating the revisions as
soon as they are issued.
Table 1. Basic Manual - Original Issue-1 September 1971
Revision Number Date Revision Number Date
1 1 January 1972 2 1 April 1972
3 1 July 1972 4 1 October 1972
5 1 January 1973 6 1 April 1973
7 1 July 1973 8 1 October 1973
9 1 March 1974 10 1 December 1974
11 1 May 1975 12 1 November 1975
13 1 August 1976 14 1 December 1976
15 1 June 1977 16 1 January 1978
17 1 July 1978 18 1 July 1979
19 1 March 1980 20 1 September 1980
21 2 March 1981 22 1 July 1981
23 4 January 1982 24 1 August 1983
25 1 October 1990 26 1 April 1994
27 3 March 2003 28 6 November 2006
29 1 November 2007 30 1 February 2010
31 1 August 2012 32 1 May 2015
33 1 May 2016 34 1 Apr 2017
2. Export Compliance
A. This publication contains technical data and is subject to U.S. export regulations. This information has been exported from
the United States in accordance with export administration regulations. Diversion contrary to U.S. law is prohibited.
ECCN: 9E991
INTRODUCTION
1. Purpose
A. This Illustrated Parts Catalog (IPC) includes the illustration and identification of replacement parts and assemblies
necessary for maintenance of the specified aircraft model. The Catalog gives the information available at the time of
publication.
Refer to the Maintenance Manual, not to this Illustrated Parts Catalog, for removal and installation procedures. The airplane
operator must use the applicable rules to establish the status or airworthiness of the airplane.
B. This IPC is prepared in accordance with the Air Transport Association 2200 Specification Format.
C. Chapter 11 contains procurable placards. Country designated placards are specified by foreign certification authorities
and put into groups identified by an International Civil Aviation Organization (ICAO) identifier in the page footer.
D. Placards identified by the Code of Federal Regulations (CFRs) include: cockpit information, including instrument markings
and any related limitations, aircraft operating limitations, power plant and auxiliary power unit instruments, flight control
markings, fuel, oil, door and emergency exit information, limitations on storage compartments, loading, passenger cabin
safety, and safety equipment operation.
E. The information in this publication is based on data available at the time of publication and is updated, supplemented, and
automatically amended by service letters, service bulletins, publication revisions, reissues, ICA supplements, and
temporary revisions which are issued through subscription services available from Customer Service. All such
amendments become part of and are specifically incorporated within this publication. The latest changes to this
publication are given through Customer Service subscription services and/or Citation Service Center and Citation Service
Stations.
F. This Catalog does not include inspection, maintenance, and parts requirements for Supplemental Type Certificate (STC)
installations. When an STC installation is incorporated on the airplane, an inspection is necessary in accordance with the
inspection program published by the owner of the STC for the parts of the airplane for which the installation has an effect.
Since STC installations can change 1) the system’s interface, 2) operation qualities, and 3) component loads or stresses
on adjacent structures, it is possible that Cessna’s inspection specifications will not apply to airplanes with STC
installations.
2. How to Get Customer Assistance
A. Customer Service
CESSNA CUSTOMER SERVICE
individual publications such as the Maintenance Manual, Parts Catalog, etc. The electronic media service publications are
available in a DVD, download, Online and mobile application library that contain multiple books together.
5. Part Number Index (Paper)
A. Part Numbers in the Numerical Index are shown in sequence, in accordance with (first) the extreme left digit, then (second)
the next digit to the right. This sequence continues throughout the numbers, from left to right. The digits are shown in the
sequence of: space, decimal, slash(/), symbol (such as #), numbers in numerical order, then alphabetical letters.
B. The Part Number Index is a complete listing of all parts included in the Detailed Parts Lists.
6. Nomenclature
A. The indentation system used in the detailed Parts List of this Catalog shows how the parts are related. For a given item,
the indentation code shows a system, installation, or general heading that starts in the extreme left position and continues
down into columns in sequence, until the end detail is completed. Refer to Figure 1.
B. The degree of indention of each item shows how the items are related. For example, the Battery Installation is in the first
indenture of the nomenclature column. The Battery Assembly Manifold is the subsequent lower assembly and is shown in
the second indenture of the nomenclature column. Refer to Paragraph A, General System of Assembly Order.
C. If two or more assemblies contain a majority of identical parts or if the assemblies are left and right counterparts, the
assemblies are in sequence. The subsequent indented assemblies or detail parts apply to both higher-level assemblies,
with the different parts coded to show that they are used on the specified, applicable assembly.
D. Attaching parts are shown immediately after the item to be attached and before any detail parts for the item. Attaching
parts are shown with the same indention as the item they attach and include the caption “Attaching Parts”. The end of the
attaching parts list is followed by the symbol" ---*---.
ORDER OF ASSEMBLY
Figure 1
E. The indenture of a component part shows if it is a part of an assembly or if it is independent of the assembly. Components
independent of an assembly have the same indenture as the assembly. Components of an assembly are identified by an
additional indenture and follow any attaching parts for the assembly.
7. List of Effective Pages (Paper Versions)
A. A List of Effective Pages in the front of each chapter of the Illustrated Parts Catalog shows all pages within the chapter in
sequence, with the current revision date for each page. A revised List of Effective Pages is included for each Illustrated
Parts Catalog revision.
8. Revision Filing Instructions (Paper Version)
A. Regular Revision
(1) Refer to the List of Effective Pages of each chapter when you add a revision.
(2) Pages changed by the revision will be indicated by the revision date on the page and on the List of Effective Pages
for that chapter. The revised page replaces the existing page in the catalog.
(3) Existing pages no longer needed in the catalog are indicated by “Deleted” on the List of Effective Pages. These
pages are to be removed and discarded. When a page has been deleted by a revision, the List of Effective Pages
for subsequent revisions do not list the page.
B. Temporary Revisions
(1) Put pages of a Temporary Revision in the applicable chapter in accordance with the filing instructions on the first
page of the Temporary Revision.
(2) Temporary Revisions should be removed from the catalog only when replaced by a revision to the catalog or by
instructions noted on the superseding Temporary Revision.
9. Revision Indicators
A. Additions, deletions, or revisions to the Parts List are identified by the letter “R” in the right margin of the page adjacent to
the change or addition. When technical changes cause unchanged text to show on a different page, an “R” is shown in the
margin opposite of the affected items.
10. Cessna Part Numbering System
A. The basic number identifies the Cessna drawing only. Each installation, assembly or detailed part is assigned a part
number and includes a seven-digit drawing number and the applicable dash number. Refer to Figure 2.
A16284
Part Number
6317003 - 1
A16286
2 4
3 5
12
6
11
7 10
SAMPLE PAGE
Figure 4
20. How to Use the Catalog if the Part Number is Known (Paper Version)
A. Refer to Figure 5
(1) Find the part number in the Part Number Index.
(2) Refer to the chapter, section, subject, figure, and item number.
(3) Go to the chapter, section, subject, and figure.
(4) Find the part on the illustration and in the part number column by item number.
SB500-29-04 Hydraulic Pump Replacement 9912062-3 Gear Pump Oct 15/1980 Sep 1/1980
for 9912062-1 Piston Pump
SB500-30-01 Windshield Bleed Air Anti-Ice Installation Mar 15/1973 Dec 1/1974
SB500-30-02 Electric Windshield Tyrector Installation Jun 27/1972 Jul 1/1972
SB500-30-03 Deice System Pressure Switch Installation Apr 5/1973 Apr 1/1973
Modification
SB500-30-04 Wing Leading Edge Anti-Ice System Inspection, Test May 9/1973 No Effect
and Modification
SB500-30-05 Bleed Air System Modification Feb 1/1974 Dec 1/1974
SB500-30-06 Pitot/Static Heaters Warning System Installation May 16/1980 Sep 1/1980
SB500-32-01 Increased Gross Weight Modification Mar 21/1973 Dec 1/1974
SB500-32-02 Nose Gear Trunnion Replacement Mar 3/1972 100%
Compliance
SB500-32-03 Shimmy Dampener Piston Rod Replacement Mar 28/1972 100%
Compliance
SB500-32-06 Nose Gear Trunnion Modification Jul 14/1972 100%
Compliance
SB500-32-07 Landing Gear Emergency Control Handle Aug 21/1972 No Effect
Modification
SB500-32-08 Brake Reservoir Pressurization Feb 9/1973 Apr 1/1973
SB500-32-09 Nose Gear Steering Angle Change Jun 11/1973 Dec 1/1974
SB500-32-10 Installation Skid Warning System Oct 11/1974 Dec 1/1974
SB500-32-11 Emergency Brake Lever Relocation Feb 1/1973 No Effect
SB500-32-12 Installation of 10" Wheel and Brake Jun 7/1973 Dec 1/1974
SB500-32-13 Skid Warning Generator Sealing Nov 5/1973 Dec 1/1974
SB500-32-14 Main Gear Actuator Replacement Aug 21/1973 Dec 1/1974
SB500-32-15 Gravel Runway Modification Mar 28/1974 Dec 1/1974
SB500-32-16 Compensated Shimmy Dampener Installation Jan 22/1974 Dec 1/1974
SB500-32-17 Landing Gear Uplock Actuator Apr 30/1974 Dec 1/1974
SB500-32-19 Compensated Shimmy Dampener Replacement Mar 28/1974 Dec 1/1974
SB500-32-20 Steering Cable Pulley Bracket Modification Oct 30/1974 Dec 1/1974
SB500-32-21 Emergency Gear Control Inspection Mar 3/1975 No Effect
SB500-32-22 Replacement of Uplock Hook Attach Bolts Oct 1/1974 May 1/1975
SB500-32-23 Increased Gross Weight - 12,000 LBS. Jan 26/1976 Nov 1/1975
SB500-32-24 Emergency Extension Bottle Plumbing Replacement Oct 24/1975 Nov 1/1975
SB500-32-25 Gravel Runway Modification Apr 4/1979 Jul 1/1979
SB500-32-27 Landing Gear Gravel Runway Modification Jan 23/1976 Jul 1/1979
SB500-32-28 Anti-Skid System Installation Oct 2/1978 Jul 1/1979
SB500-32-29 Brake Reservoir Pressurization Check Valve Jul 21/1978 Jul 1/1979
Modification
SB500-32-30 Aviation Brake Anti-Skid System Conversion Jul 28/1978 Jul 1/1979
SB500-32-31 Anti-Skid System Accumulator Service Valve Nov 14/1978 Jul 1/1979
Relocation
SB500-32-32 Gravel Runway Option Wiring Modification Aug 30/1979 No Effect
SB500-32-33 Main Landing Gear Actuator Replacement May 18/1979 Mar 1/1980
SB500-32-34 Skid Warning Diode Inspection/Removal Mar 21/1980 Mar 1/1980
SB500-32-38 7 BFGoodrich Brakes and Wheels Installation Feb 8/2006 Oct 1/1990
SB500-32-42 Main Landing Gear Wheel Well Aft Spar Box Jan 4/1993 Aug 1/2009
Hydraulic/Pneumatic Lines Grommet Replacement
SB500-32-43 Main Landing Gear Side Brace Stud Jul 6/1994 Nov 6/2006
Inspection/Replacement
SB500-32-44 Transmittal Of BF Goodrich Service Bulletin 195-183- Jul 19/1996 No Effect
32-1, Landing Gear-Main Brake Shuttle Valve
Improvements
SB500-32-47 3 Transmittal Of BF Goodrich Service Bulletin 2-1530- Apr 30/2003 No Effect
32-2, Revision 5, Landing Gear Brake Assembly
Possible Cracked Stator Disks
SB500-32-48 3 Transmittal Of Goodrich Service Bulletin 2-1528-32-2, Apr 30/2003 No Effect
Revision 5, Landing Gear Brake Assembly Possible
Cracked Stator Disks
SB500-32-49 Main Landing Gear Trunnion Attach Pin Replacement Mar 5/2002 No Effect
SB500-32-51 1 Landing Gear - Replacement of Bleeder Screws and Nov 20/2013 No Effect
Fittings with Bleeder Plugs
SB500-33-01 Lights Oxygen System Switches Lighting Installation Feb 1/1973 Apr 1/1973
SB500-33-02 Nose Baggage Light Installation Jun 11/1973 Dec 1/1974
SB500-33-03 Recognition Lights Installation Nov 7/1978 Jul 1/1979
SB500-33-04 4 Supplement Beacon, Rudder Mounted Apr 1/1993 Nov 1/2007
SB500-33-05 Electroluminescent Panel Inverter Installation May 15/1980 Sep 1/1980
(Replacement for Inverters P/N 0168 or 0168A)
SB500-33-06 1 Recognition Lights Circuit Protection Modification Mar 18/1983 Nov 6/2006
SB500-33-07 Taillight Installation Oct 1/1980 Mar 2/1981
SB500-33-08 6 Lights - Rudder Mounted Oscillationg Beacon May 4/2006 Aug 1/2009
Replacement
SB500-33-11 1 Lights - WingTip Nav/Collision Light Modification Sep 23/1993 Aug 1/2009
SB500-33-12 Lights - Landing Light Circuit Switch Module Apr 12/1996 Aug 1/2009
Installation
SB500-33-13 Emergency Lighting Battery Pack Upgrade Jan 24/1997 Nov 1/2007
SB500-33-14 Lights - LED Tail Position Light Installation Jun 5/2006 Aug 1/2009
SB500-34-01 ADF Cable Relocation and Filter Installation Jul 14/1972 Jul 1/1972
SB500-34-02 RMI Wiring Change Aug 21/1972 No Effect
SB500-34-03 Altitude Alerting and Reporting System Oct 6/1972 Dec 1/1974
SB500-34-04 Yaw and Turn Rate Gyro Replacement Jun 11/1973 Jul 1/1973
SB500-34-05 Second Transponder Installation May 8/1973 Jul 1/1973
SB500-34-06 Wiring Change to Utilize - 2 HIS Jul 27/1973 No Effect
SB500-34-07 Installation of Collins Radio Altimeter May 21/1973 Dec 1/1974
SB500-34-08 Locator Beacon Installation Jan 17/1973 Jan 1/1973
SB500-34-09 Installation of Angle of Attack May 21/1973 Apr 1/1973
SB500-34-11 Wiring Change to Provide Altitude Reporting with Apr 5/1973 Nov 1/1975
Either Transponder
SB500-34-12 1 Wiring Change to Allow Installation of AVN220A Nav Apr 24/1973 No Effect
Receiver in Place of AVN220 Nav Receiver
SB500-34-13 IDC Altitude Alerting and Reporting System Apr 6/1973 Apr 1/1973
Installation
SB500-34-14 Area Nav (RNS-3400A) System Installation Jul 16/1973 Jul 1/1973
SB500-34-15 9500 Pound Zero Fuel Weight Jun 11/1973 Jul 1/1973
SB500-34-17 Pitot and Static Heater Indicator Light Feb 4/1974 Aug 1/1976
SB500-34-18 Pitot Static Line Inspection Mar 28/1974 No Effect
SB500-34-19 PN101 Flux Detector Replacement Jul 29/1974 Dec 1/1974
SB500-34-20 Static Sourse Modification Mar 28/1974 Dec 1/1974
SB500-34-22 Attitude Controller Circuit Inspection Oct 4/1974 No Effect
SB500-34-23 10,500 Zero Fuel Weight Dec 9/1974 Dec 1/1974
SB500-34-24 Avionics J-Box Placard Jul 29/1974 Dec 1/1974
SB500-34-26 Area Navigation Cooling Louver Jan 21/1975 No Effect
SB500-34-27 Glideslope Interlock Modification Jun 6/1975 No Effect
SB500-34-29 Area Nav Adapter Cable Installation Oct 24/1975 Aug 1/1976
SB500-34-30 RF Filter Installatoin and Receiver and Accessory Oct 24/1975 Nov 1/1975
Change
SB500-34-31 Angle of Attack System Apr 19/1976 Jul 1/1979
SB500-34-32 Area Navigation Installation Apr 19/1976 Jul 1/1979
SB500-34-33 Area Navigation Conversion Apr 21/1976 No Effect
SB500-34-34 Area Navigation Installation Apr 21/1976 Jul 1/1979
SB500-34-35 Locator Beacon Installation Aug 12/1976 Jul 1/1979
SB500-34-37 ARC/ADF Noise Suppression Modification Apr 21/1976 No Effect
SB500-34-38 Air Data Computer Mount Modification Apr 10/1976 No Effect
SB500-34-39 Altitude Alert Horn Terminal Insulation Mar 11/1977 No Effect
SB500-34-40 1 Marker Beacon Light Dimming Modification Apr 6/1984 No Effect
SB500-34-41 Standby Gyro Replacement May 19/1978 Jul 1/1979
SB500-34-42 1 Sperry RD600, 5 Inch HIS, Modification "C" Wiring Apr 27/1981 No Effect
Change
SB500-34-43 ADF 60 Cable Change and Inductor Installation Feb 12/1979 Jul 1/1979
SB500-34-44 Global VLF Navigation Installation Jan 29/1980 Mar 2/1981
SB500-34-45 Pointer Sentry ELT Installation Feb 2/1981 Mar 2/1981
SB500-34-47 1 VLF-Install Circuit To Increase Flight Director Gain May 5/1982 No Effect
Programming In VLF Mode
SB500-34-48 H.S.I. 2 Emergency Power Oct 29/1982 No Effect
SB500-34-49 VLF System H-Field Loop Antenna Installation Sep 24/1985 Oct 1/1990
SB500-34-50 1 DME/VLF and VNAV Wiring Modification-Remove Sep 21/1984 No Effect
the Valid Distance/Bearing Signal From VNAV When
in VLF Mode
SB500-34-51 2 Flight Director VOR/LOC Angular Intercept Logic In Oct 4/1985 No Effect
VLF Mode Interconnect Wiring Modification
SB500-34-52 Collins 331A-9G HSI/DME Wiring Modification Apr 8/1983 No Effect
SB500-34-53 2 Accelerometer Ground Wire Installation Aug 9/1985 No Effect
SB500-53-11 Rivet Inspection, Nose Gear Actuator Bracket Aug 5/1979 No Effect
SB500-53-12 3 Aft Cabin Door Frame Inspection/Modification Mar 12/1982 No Effect
SB500-53-13 2 Tailcone Skin-Inspection and Modifiction of Vertical Jun 28/1985 Oct 1/1990
Fin Spar Interference
SB500-53-14 Nose Drip Cap Installation May 17/1982 Oct 1/1990
SB500-53-15 2 Tailcone Ballast Installation Mar 2/1988 No Effect
SB500-53-19 2 Cabin Interior Attach/Contact Point Corrosion Jan 4/1993 Nov 1/2007
Protection
SB500-53-20 Flight Crew Seat Rail and Beam Rivets Jan 7/1994 No Effect
Inspection/Installation
SB500-53-22 Dorsal Fin Installation And Material Improvement Feb 21/1997 Nov 6/2006
SB500-53-26 Fuselage - Wheel Well Box Improvement May 16/2003 Feb 1/2010
SB500-55-01 Rudder & Elevator Torque Tube Corrosion Proofing Mar 17/1971 100%
Compliance
SB500-55-02 Elevator Torque Tube Assy Inspection and Mar 29/1973 Apr 1/1973
Replacement
SB500-55-03 Horizontal Stabilizer Leading Edge Rib Replacement Apr 27/1979 Mar 2/1981
SB500-56-01 Windshield Static Discharger Installation Jan 31/1972 100%
Compliance
SB500-56-03 Replacement and/or Inspection of Cabin Windows Oct 5/1972 Jul 1/1972
SB500-56-04 Flight Compartment Side Window Modification Jul 24/1974 Dec 1/1974
SB500-56-05 Window Replacement Oct 24/1975 Nov 1/1975
SB500-56-06 Windshield Spares Replacement Jun 4/1982 Aug 1/1983
SB500-57-01 Inspection Plate Installation - Flap Jul 1/1972 Jul 1/1972
SB500-57-02 Cover Plates Screw Change Mar 1/1973 Apr 1/1973
SB500-57-03 Center Flap Track, Aft Bearing Roller Shaft Feb 12/1973 Apr 1/1973
Replacement
SB500-57-04 Flap Replacement Program and Attachment Oct 3/1973 Dec 1/1974
Modification
SB500-57-05 Wing Fillet Screw Relocation Jun 11/1973 Apr 1/1973
SB500-57-06 Wing Trailing Edge Reinforcement Jun 11/1973 Dec 1/1974
SB500-57-07 Wing Replacement Oct 3/1975 Jul 1/1979
SB500-57-08 Main Landing Gear Uplock Support Fitting Attach Oct 24/1973 Nov 1/1975
Modification
SB500-57-09 Wing Aileron Cable Clearance Modification Mar 17/1978 No Effect
SB500-57-12 2 Airplane Configuration Update Mar 22/1989 Feb 1/2010
SB500-57-13 1 Wing Spar Skin Strip Replacement Feb 28/1990 No Effect
SB500-71-01 Fuel Canister Installation Jan 23/1974 Dec 1/1974
SB500-71-02 Fuel Canister (Manual Drain) Nov 22/1974 Dec 1/1974
SB500-71-03 Improved Oil Venting System Mar 9/1976 Jul 1/1979
SB500-71-04 Engine Bonding Modification Jun 6/1975 May 1/1975
SB500-71-05 ITT Transmitter to Airframe Wiring Modification Mar 4/1977 Jul 1/1979
SB500-71-06 1 To Allow Use of JT15D-1B Engines When Updated Jan 31/1997 Oct 1/1990
From JT15D-1A
SB500-72-01 Inspection of Engine Fuel Pump Output Filter Feb 28/1974 No Effect
37942 NORTH AMERICAN CAPACITOR CO. 50294 NEW HAMPSHIRE BALL BEARING, INC.
MALLORY DIV. 9727 Desoto Ave.
Indianapolis Rd. Hwy. 240 Chatsworth, CA 91311-4373
P.O. Box 273
Indianapolis, IN 46135
39481 MEAD FLUID DYNAMICS DIV. OF STANRAY 50549 TECHNAR, INC.
CORP. 205 N. Second Ave.
4114 N. Knox Ave. Arcadia, CA 73199
Chicago, IL 60641-1902
3J999 WILLIAMS MFG. CO. 51351 COMANT INDUSTRIES, INC.
DIV. OF D & D ENGINEERING INC. 12920 Park St.
809 S. Main St. Santa Fe Springs, CA 93022
Fredericktown, MO 63645
41635 AERO PRODUCTS, INC. 51563 ROHR INDUSTRIES, INC.
708 Industry Rd. Foot of H St.
Longwood, FL 32750 P.O. Box 878
Chula Vista, CA 91910
43588 RADIO SHACK 51752 GLOBAL WULFSBERG SYSTEM
449 S. Rock Rd. DIV. OF SUNDSTRAND DATA CONTROL, INC.
Wichita, KS 67207 8216 154th Ave. NE.
Redmond, WA 98052
44142 NORTHFIELD FOUNDRY AND MACHINE CO. 53201 SMO-KING PRODUCTS, INC.
320 N Water St. P.O. Box 342
P O Box 140 Brooklyn, NY 11231
Northfield, MN 55057
44655 OHMITE CORP. CO. 54001 ALLIED-SIGNAL, INC.
3601 W. Howard St. GENERAL AVIATION AVIONICS
Skokie, IL 60076 6400 Wilkinson Dr.
Prescott, AZ 86301
45402 PACIFIC SCIENTIFIC CO. HTL/KIN TECH DIV. 54071 APPH WICHITA, INC.
CONTROLS AND RESEARCH GROUP 1445 South Sierra Dr.
1800 Highland Ave. Wichita, KS 67209-2933
Duate, CA 91010
70655 AUTO VEHICLE PARTS CO. 72625 DIAMOND CHAIN CO. DIV. OF AMSTED IND. INC.
7 Sperti Dr. 402 Kentucky Ave.
P.O. Box 17350 P.O. Box 7045
Covington, KY 41017 Indianapolis, IN 46207
71124 BRAND-REX CO. 72653 THORSEN GC, INC.
Route 32 1801 Morgan St.
P.O. Box 498 Rockford, IL 61105
Willimentic, CT 06226
71286 ALCOA GLOBAL FASTENERS, INC. CAMLOC 72794 DZUS FASTENER CO., INC.
PRODUCTS DIV. 425 Union Blvd.
DBA ALCOA FASTENING SYSTEMS West Islip, NY 11795-3116
3014 West Lomita Blvd.
Torrance, CA 90505
71400 COOPER BUSSMAN, INC. 72850 MOTOR COMPONENTS, LLC
114 Old State Rd. 2243 Corning Rd.
P.O. Box 14460 Elmira, NY 14903-1094
St. Louis, MO 63021-5942
71468 ITT CANNON 72914 GRIMES AEROSPACE CO.
DIV. OF ITT CORP. DBA HONEYWELL
666 E. Dyer Rd. 550 St. Rt. 55
Santa Ana, CA 92705 Urbana, OH 43078-1948
71688 NORTHERN TELECOM INC. COOK ELECTRIC 72962 ELASTIC STOP NUT
DIV. A DIV. OF HARVARD INDUSTRIES, INC.
6201 Oaktron St. 2330 Vauxhall Rd.
Morton Grove, IL 60053 Union, NJ 07083
71744 CHICAGO MINIATURE LAMP, INC. 73030 UNITED TECH CORP. HAMILTON STD DIV.
147 Central Ave. 1 Hamilton Rd.
Hackensack, NJ 07601 Windsor Locks, CT 06096
71785 LABINAL CO.MPONENTS AND SYSTEMS INC. 73134 ROLLER BEARING CO. OF AMERICA, INC.
1521 Morse Ave. HEIM BEARINGS DIV.
Elk Grove Village, IL 60007 60 Round Hill Rd.
Fairfield, CT 06430
72138 FERRO CORP. REFRACTORIES DIV. 73197 HI-SHEAR CORP.
ELECTRO PLANT 2600 Skypark Dr.
661 Willet Rd. Torrance, CA 90509
Lackawanna, NY 14218
72619 DIALIGHT CORP. 73760 ITT FLUID TECHNOLOGY CORP.
BROOKLYN DIV. AEROSPACE CONTROLS DIV.
203 Harrison Pl. 28150 Industry Dr.
Brooklyn, NY 11237-1587 Valencia, CA 91355
98313 DAVIS AIRCRAFT PRODUCTS CO. INC. 99251 LITTON SYSTEMS, INC.
1150 Walnut Ave. INSTRUMENTS & LIFE SUPPORT DIV.
Bohemia, NY 11716 2734 Hickory Grove Rd.
P.O. Box 4508
Davenport, IA 52808-4508
98391 ARKWIN INDUSTRIES INC. 99321 SHAW AERO DEVICES, INC.
686 Main St. 3580 Shaw Blvd.
Westbury, NY 11590 Naples, FL 34117
98441 PARKER-HANNIFIN CORP. FLUID 99539 GENERAL FIRE EXTINGUISHER CORP.
CONNECTORS DIV. 1685 Shermer Rd.
220 Roberts Cutoff Northbrook, IL 60062-5315
P.O. Box 10398
Fort Worth, TX 76114-0398
98625 AEROQUIP CORP. AEROQUIP AEROSPACE 99551 GOODRICH CORP.
DIV. MARMAN PLANT 104 Otis St.
Replaced by 00624 Rome, NY 13441-4714
Los Angeles, CA
98810 AEROSONIC CORP. 99643 EATON AEROSPACE, LLC DBA STERER
1212 N. Hercules ENGINEERING DIV.
P.O. Box 4627 VICKERS FLUID CONTROL AND ACTUATION
Clearwater, FL 33765 DIV.
4690 Colorado Blvd.
Los Angeles, CA 90039
98889 THE TALLEY CORP. 99699 DEUTSCH CO.,THE DEUTSCH RELAYS INC.
DBA TELEFLEX CO.NTROL SYSTEMS DIV.
1950 Williams Dr. 65 Daly Rd.
Oxnard, CA 93030 East Northport, NY 11731-6304
98927 ELECTRONIC SPECIALTY CORP. RELAY DIV. 99837 GABLES ENGINEERING, INC.
14511 NE. 13th Ave. 247 Greco Ave.
P.O. Box 3501 P.O. Box 340880
Vancouver, WA 98668-3501 Coral Gables, FL 33146
99215 KAISER AEROSPACE & ELECTRONICS CORP. 99862 CARR LANE MFG. CO.
KAISER FLUID TECHNOLOGIES DIV. 4200 Carr Lane Ct.
530 Sugar Creek Rd. East St. Louis, MO 63119
P.O. Box 5270
Charlotte, NC 25225
99221 TAVCO INC. AISP AIRCRAFT SPECIALISTS
20500 Prairie St. 3425 W. Central
Chatsworth, CA 91311 Wichita, KS
99240 CRISSAIR, INC. BLAR BEL-AIRE INSTRUMENTS
38905 10th St. East 6750 W. Kellogg
Palmdale, CA 93550 Suite 1
Wichita, KS 67209