Scribd
Upload
46 views5 pages

New Mockup With Smart Object

This document provides instructions for how to use a 3D logo mockup file. It outlines 3 steps: 1) Open the smart object layer of the mockup file, 2) Copy and paste your own logo design into the opened file, and 3) Close and save the file to update the mockup with your logo. The instructions emphasize opening the red highlighted smart object, copying a design into the new file, and closing to update the main mockup file with the custom design.

Uploaded by

spynoza81
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
46 views5 pages

New Mockup With Smart Object

This document provides instructions for how to use a 3D logo mockup file. It outlines 3 steps: 1) Open the smart object layer of the mockup file, 2) Copy and paste your own logo design into the opened file, and 3) Close and save the file to update the mockup with your logo. The instructions emphasize opening the red highlighted smart object, copying a design into the new file, and closing to update the main mockup file with the custom design.

Uploaded by

spynoza81
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

INTRODUCTION

HOW TO USING FILE MOCKUP


http://graphicriver.net/item/mockup-logo-3d_reception_vol3_richhunter/8225661?ref=Richhunter
http://graphicriver.net/item/mockup-logo-3d_reception_vol3_richhunter/8225661?ref=Richhunter
http://graphicriver.net/item/mockup-logo-3d_reception_vol3_richhunter/8225661?ref=Richhunter
http://graphicriver.net/item/mockup-logo-3d_reception_vol3_richhunter/8225661?ref=Richhunter

Version 3.0 - July 10, 2014


STEP 1 : Open Smart Object

Double Click to windown layer (Hightlight Red)

We call the file have Hightlight Red is “Smart Object”

Created by

If you see the warning, just click OK.


STEP 2 : Copy and Paste Your Design

After double click “Smart Object” , it will be opened new file.

We Copy Your Design and Paste inside the new file, then we save file (Ctrl + S)

Created by
STEP 3 : Close The File Smart Object and Have 3D File

After save file, we will Close (Ctrl +W) new file.

Then you will return the main mockup file, the design have updated follow your design

Created by
Congratulations !

You had Professional Present Project


Wish the best success to your work and thank you so much for using my Mockup

Rich, Brand Designer

If you have any question to using file Mockup, just feel free to contact me on Graphicriver
http://graphicriver.net/user/Richhunter

Please Rate this Mockup, if you happy it

You might also like