Scribd Logo
Upload

Welcome to Scribd!

  • 750 views

    Manual Valves Datasheet. Rev 1

    Uploaded by

    eke23
    This document contains datasheets for valves to be used in the design, supply, installation and commissioning of a skidded 600#, 4 header, 24 slot segmented inlet manifold at Ekulama 1 Flowstation. It includes details on manual ball valves and check valves in sizes ranging from 1 to 8 inches, specifying materials, ratings, end connections, dimensions, flows and other technical details. Approval signatures and revision tracking are provided at the bottom.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Manual Valves Datasheet. Rev 1

    Uploaded by

    eke23
    750 views7 pages
    This document contains datasheets for valves to be used in the design, supply, installation and commissioning of a skidded 600#, 4 header, 24 slot segmented inlet manifold at Ekulama 1 Flowstation. It includes details on manual ball valves and check valves in sizes ranging from 1 to 8 inches, specifying materials, ratings, end connections, dimensions, flows and other technical details. Approval signatures and revision tracking are provided at the bottom.

    Original Description:

    manual valve datasheet

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains datasheets for valves to be used in the design, supply, installation and commissioning of a skidded 600#, 4 header, 24 slot segmented inlet manifold at Ekulama 1 Flowstation. It includes details on manual ball valves and check valves in sizes ranging from 1 to 8 inches, specifying materials, ratings, end connections, dimensions, flows and other technical details. Approval signatures and revision tracking are provided at the bottom.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    750 views7 pages

    Manual Valves Datasheet. Rev 1

    Uploaded by

    eke23
    This document contains datasheets for valves to be used in the design, supply, installation and commissioning of a skidded 600#, 4 header, 24 slot segmented inlet manifold at Ekulama 1 Flowstation. It includes details on manual ball valves and check valves in sizes ranging from 1 to 8 inches, specifying materials, ratings, end connections, dimensions, flows and other technical details. Approval signatures and revision tracking are provided at the bottom.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 7
    At a glance
    Powered by AI
    The document provides datasheets and specifications for different types of valves for an inlet manifold project.

    The valves described include ball valves, check valves, and globe valves.

    For each valve, specifications such as size, material, end connections, pressure rating, flow rates, and location are provided.

    NEWCROSS Exploration and Production Limited

    DESIGN, SUPPLY, INSTALLATION AND COMMISSIONING OF A SKIDDED 600#, 4


    HEADER, 24 SLOTS SEGMENTED INLET MANIFOLD AT EKULAMA 1 FLOWSTATION

    DATASHEETS FOR VALVES


    DOCUMENT No:
    EKUF1-19001-FODE-PP-LST-1002

    KINGSLEY SAMSON
    P 03/12/18 Issued for IDC
    E. O.
    REV DATE ISSUE PURPOSE ORIG CHK APPR

    APPROVED BY: COMPANY APPROVAL:

    DATE: DATE:
    Project Document
    FODE Document Client Discipline Sequence Number Revision
    Number Type
    Control No.
    19000 NWC PP
    DESIGN OF SKIDDED 600#, 4 HEADER 24 SLOT SEGMENTED INLET MANIFOLD
    DATASHEETS FOR VALVES

    A. BALL VALVE
    Plant: EKULAMA I FLOWSTATION Date: By:
    Area: PO# Rev:
    Project: EKULAMA 1 INLET MANIFOLD PROJECT Project No: Sheet:

    VALVE SERVICE HYDROCARBON PROCESSING

    VALVE NAME MANUAL BALL VALVE MANUAL BALL VALVE

    QUANTITY
    TYPE 600# RB ANSI B16.25 600# RB ANSI B16.25 600# RB ANSI B16.25

    SIZE 4 inch RB 8 inch RB 1 inch RB


    B Body Material ASTM A216-WCB ASTM A216-WCB ASTM A216-WCB
    O Adapter ASTM A216-WCB ASTM A216-WCB ASTM A216-WCB
    D Rating 600# ANSI RATING 600# ANSI RATING 600# ANSI RATING
    Y End Connections Flanged End RF Flanged End RF Flanged End RF
    Body Dim. face/face 17 inch 26 inch 8.5 inch
    M Downstream Piping 4 inch 8 inch 1 inch
    A Port Style Reduced Port Reduced Port Reduced Port
    T Handle Ductile Iron Ductile Iron Ductile Iron
    E Thrust Bearing Reinforced Teflon Reinforced Teflon Reinforced Teflon
    R Gland Packing Graphite Graphite Graphite
    I Body Gasket Graphite Graphite Graphite
    A Stem Spacer Nylon Nylon Nylon
    L Body Seat DELRIN DELRIN DELRIN
    Studs ASTM A-193 B7 & B7M ASTM A-193 B7 & B7M ASTM A-193 B7 & B7M
    Nuts ASTM A-193 B7 & B7M ASTM A-193 B7 & B7M ASTM A-193 B7 & B7M
    Handle Bolt Plated Carbon Steel Plated Carbon Steel Plated Carbon Steel
    T Material Seat PTFE PTFE PTFE
    R Ball 316 SS 316 SS 316 SS
    I Adapter 316 SS 316 SS 316 SS
    M

    A Actuator Type Manual (HANDLE) Manual (GEAR) Manual (HANDLE)


    C Actuator Size N/A N/A N/A
    T Instrument Air Pressure (psig) N/A N/A N/A
    U Limit Switches N/A N/A N/A
    A Open / Close Indicator N/A N/A N/A
    T Failsafe N/A N/A N/A
    O Operated N/A N/A N/A
    R Lockable N/A N/A N/A
    MULTIPHASE STREAM MULTIPHASE STREAM MULTIPHASE
    S Fluid STREAM
    E Header Line Size 4 inch 8 inch 1 inch
    R Flow - Min./Max. (UsGPM) 30 150 150 750 10 50
    V Flow – Normal, (UsGPM) 100 500 30
    I Temperature,  C 37 deg C 37 deg C 37 deg C
    C Valve differential press. psig

    2
    DESIGN OF SKIDDED 600#, 4 HEADER 24 SLOT SEGMENTED INLET MANIFOLD
    DATASHEETS FOR VALVES

    E Pressure, psig
    Fire Resistance Requirement API 6FA API 6FA API 6FA
    API 6D API 6D API 6D
    Anti Static Design Requirement
    Location Above ground Above ground Above ground
    Manufacturer N/A N/A N/A
    Model Number N/A N/A N/A
    NOTES:
    Certification: EN/DIN 50049 3.1 B material certificates for body and bonnet.
    Tightness Test Certificates
    Valve Testing: To be tested for body integrity and seat tightness. The body test pressure is to be 1.5 times the maximum
    pressure rating
    The seat test pressure is to be 1.1 times maximum pressure rating.
    The test medium will be both air and inhibited water.
    Seat Test : As per MSS SP –72/ANSI/FCI 70-2 Class V
    Inspection : By NEWCROSS
    Rev: Rev:

    3
    DESIGN OF SKIDDED 600#, 4 HEADER 24 SLOT SEGMENTED INLET MANIFOLD
    DATASHEETS FOR VALVES

    B. CHECK VALVE (SWING TYPE)


    Plant: EKULAMA I FLOWSTATION Date: By:
    Area: PO# Rev:
    Project: EKULAMA 1 INLET MANIFOLD PROJECT Project No: Sheet:

    VALVE SERVICE HYDROCARBON PROCESSING

    VALVE NAME MANUAL CHECK VALVE


    SERVICE
    QUANTITY
    TYPE 600# RB ANSI B16.25

    SIZE 3inch RB 1inch RB


    B Body Material ASTM A216-WCB ASTM A216-WCB
    O Adapter ASTM A216-WCB ASTM A216-WCB
    D Rating 600# ANSI RATING 600# ANSI RATING
    Y End Connections Flanged End RF Flanged End RF
    M Body Dim. face/face 14 inch 8.5 inch
    A Downstream Piping 3 inch 1 inch
    T Port Style Full Bore Full Bore
    E Handle N/A N/A
    R Thrust Bearing Reinforced Teflon Reinforced Teflon
    I Gland Packing Graphite Graphite
    A Body Gasket Graphite Graphite
    L Stem Spacer Nylon Nylon
    Body Seat DELRIN DELRIN
    Studs ASTM A-193 B7 & B7M ASTM A-193 B7 & B7M
    Nuts ASTM A-193 B7 & B7M ASTM A-193 B7 & B7M
    Handle Bolt Plated Carbon Steel Plated Carbon Steel
    T Material SWING STELLITE STELLITE
    R AISC 410 AISC 410
    I
    M

    A Actuator Type N/A N/A


    C Actuator Size N/A N/A
    T Instrument Air Pressure (psig) N/A N/A
    U Limit Switches N/A N/A
    A Open / Close Indicator N/A N/A
    T Failsafe N/A N/A
    O Operated N/A N/A
    R Lockable N/A N/A
    MULTIPHASE STREAM MULTIPHASE STREAM
    S Fluid

    E Header Line Size 3 inch 1 inch


    R Flow - Min./Max. (UsGPM) 20 100 10 50
    V Flow – Normal, (UsGPM) 80 30
    I Temperature,  C 37 deg C 37 deg C
    C Valve differential press. psig

    4
    DESIGN OF SKIDDED 600#, 4 HEADER 24 SLOT SEGMENTED INLET MANIFOLD
    DATASHEETS FOR VALVES

    E Pressure, psig
    Fire Resistance Requirement API 6FA API 6FA
    API 6D API 6D
    Anti Static Design Requirement
    Location Above ground Above ground
    Manufacturer N/A N/A N/A
    Model Number N/A N/A N/A
    NOTES:
    Certification: EN/DIN 50049 3.1 B material certificates for body and bonnet.
    Tightness Test Certificates
    Valve Testing: To be tested for body integrity and seat tightness. The body test pressure is to be 1.5 times the maximum
    pressure rating
    The seat test pressure is to be 1.1 times maximum pressure rating.
    The test medium will be both air and inhibited water.
    Seat Test : As per MSS SP –72/ANSI/FCI 70-2 Class V
    Inspection : By NEWCROSS
    Rev: Rev:

    5
    DESIGN OF SKIDDED 600#, 4 HEADER 24 SLOT SEGMENTED INLET MANIFOLD
    DATASHEETS FOR VALVES

    C. GLOBE TYPE
    Plant: EKULAMA II FLOWSTATION Date: By:
    Area: PO# Rev:
    Project: EKULAMA 1 INLET MANIFOLD PROJECT Project No: Sheet:

    VALVE SERVICE HYDROCARBON PROCESSING

    VALVE NAME MANUAL GLOBE VALVE


    SERVICE
    QUANTITY
    TYPE 600# RB ANSI B16.25

    SIZE 1 inch RB
    B Body Material ASTM A216-WCB
    O Adapter ASTM A216-WCB
    D Rating 600# ANSI RATING
    Y End Connections Flanged End RF
    M Body Dim. face/face 8.5 inch
    A Downstream Piping 1 inch
    T Port Style Full Bore
    E Handle N/A
    R Thrust Bearing Reinforced Teflon
    I Gland Packing Graphite
    A Body Gasket Graphite
    L Stem Spacer Nylon
    Body Seat DELRIN
    Studs ASTM A-193 B7 & B7M
    Nuts ASTM A-193 B7 & B7M
    Handle Bolt Plated Carbon Steel
    T Material SWING STELLITE
    R AISC 410
    I
    M

    A Actuator Type N/A


    C Actuator Size N/A
    T Instrument Air Pressure (psig) N/A
    U Limit Switches N/A
    A Open / Close Indicator N/A
    T Failsafe N/A
    O Operated N/A
    R Lockable N/A
    MULTIPHASE STREAM
    S Fluid

    E Header Line Size 1 inch


    R Flow - Min./Max. (UsGPM) 10 50
    V Flow – Normal, (UsGPM) 30
    I Temperature,  C 37 deg C
    C Valve differential press. psig

    6
    DESIGN OF SKIDDED 600#, 4 HEADER 24 SLOT SEGMENTED INLET MANIFOLD
    DATASHEETS FOR VALVES

    E Pressure, psig
    Fire Resistance Requirement API 6FA
    API 6D
    Anti Static Design Requirement
    Location Above ground
    Manufacturer N/A
    Model Number N/A
    NOTES:
    Certification: EN/DIN 50049 3.1 B material certificates for body and bonnet.
    Tightness Test Certificates
    Valve Testing: To be tested for body integrity and seat tightness. The body test pressure is to be 1.5 times the maximum
    pressure rating
    The seat test pressure is to be 1.1 times maximum pressure rating.
    The test medium will be both air and inhibited water.
    Seat Test : As per MSS SP –72/ANSI/FCI 70-2 Class V
    Inspection : By NEWCROSS
    Rev: Rev:

    You might also like