The Ultimate Windows 7 and Ubuntu

Linux Dual Boot Guide

by Gary Newell

Updated October 25, 2018

This guide will show you how to dual-boot Windows 7 and Ubuntu Linux by
incorporating screenshots alongside clear and concise steps.

The steps for booting Ubuntu alongside Windows 7 are as follows:

1. Take a backup of your system.

2. Create space on your hard drive by Shrinking Windows.
3. Create a bootable Linux USB drive / Create a bootable Linux DVD.
4. Boot into a live version of Ubuntu.
5. Run the installer.
6. Choose your language.
7. Make sure you are plugged in, connected to the internet and have enough disk space.
8. Choose your installation type.
9. Partition your hard drive.
10. Choose your timezone.
11. Choose your keyboard layout.
12. Create a default user.
Take a Backup

This is probably the least interesting but most important step in the whole process.

The piece of software I recommend using for backing up your system is Macrium
Reflect. There is a free version available for making a system image.

Bookmark this page and then follow this link for a tutorial showing how to create a
system image using Macrium Reflect.
Create Space on Your Hard Drive

You need to make some space on your hard drive for the Linux partitions. To do this
you have to shrink your Windows partition via the disk management tool.

To start the disk management tool click Start and type diskmgmt.msc into the Search
box and then press Return.

Here's how to open the disk management tool if you need more help.
Shrink the Windows Partition

Windows is likely to be on the C: drive and can be identified by its size and the fact it
has an NTFS partition. It will also be the active and boot partition.

Right-click on the C: drive (or the drive that contains Windows) and choose Shrink
Partition.

The wizard will automatically set the amount that you can shrink the disk by without
harming Windows.

Note:Before accepting the defaults

consider how much space Windows
might need in the future. If you plan
to install further games or
applications it might be worth
shrinking the drive by less than the
default value.
You should allow at least 20 gigabytes for Ubuntu.

Choose how much space you want to set aside for Ubuntu including creating space for
documents, music, videos, applications and games and then click Shrink.

How the Disk Looks After Shrinking Windows

The above screenshot shows how your disk will look after you have shrunk Windows.

There will be unallocated space set to the size that you shrunk Windows by.
Create a Bootable USB or DV

A decision you have to make is whether to download the 32-bit or 64-bit version. Quite
simply if you have a 64-bit computer choose the 64-bit version otherwise download the
32-bit version.

To create a bootable DVD:

1. Right-click on the downloaded ISO file and choose Burn Disc Image.
2. Insert a blank DVD into the drive and click Burn.

If your computer doesn't have a DVD drive you will need to create a bootable USB
drive.

The easiest way to create a bootable USB drive for non UEFI drives is to download the
Universal USB Installer.

Note:The download icon is

halfway down the page.
 1. Run the Universal USB Installer by double-clicking on the icon. Ignore
any security message and accept the license agreement.
2. From the dropdown list at the top choose Ubuntu.
3. Now click Browse and find the downloaded Ubuntu ISO.
4. Click the dropdown menu at the bottom to select your flash drive. If the list is
blank place a check in the Now Showing All Drives checkbox.
5. Choose your USB drive from the dropdown list and check the format drive box.
6. If you have any data on the USB drive that you want to keep copy it somewhere
safe first.
7. Click Create to create the bootable Ubuntu USB drive.

Boot Into Live Ubuntu Session

Note:Read this step fully before rebooting your

computer so that you can get back to the guide
after booting into the live version of Ubuntu.

1. Reboot your computer and leave either the DVD in the drive or the USB
connected.
 2. A menu should appear giving you the option to Try Ubuntu.
3. After Ubuntu has booted into the live session click the network icon in the top
right corner.
4. Choose your wireless network. Enter a security key if one is required.
5. Open FireFox by clicking the icon in the launcher on the left side and navigate
back to this guide to follow the remaining steps.
6. To start the installation, click the Install Ubuntu icon on the desktop.

You can now move onto Choose Your Language (below).

If the menu doesn't appear, follow Troubleshooting steps (below).

Troubleshooting

If the menu doesn't appear and the computer boots straight into Windows you need
to change the boot order on your computer so that the DVD drive or USB drive is
booted before the hard drive.

To change the boot order restart the computer and look for the key that you need to
press to load the BIOS setup screen. Generally, the key will be a function key such
as F2, F8, F10 or F12 and sometimes it is the escape key. If in doubt either search on
Google for your make and model.

After you have entered the BIOS setup screen look for the tab that shows the boot order
and switch the order so that the method you are using to boot Ubuntu appears above
the hard drive. (Again if in doubt look for instructions for amending the BIOS for your
particular machine on Google.)

Save the settings and reboot. The Try Ubuntu option should now appear. Go back
to Boot Into Live Ubuntu Session and repeat that step.
If you ever need to start from scratch, by the way, you can use this guide to uninstall
Ubuntu software packages.

Choose Your Language

Choose your language and then click Continue.

Connect to the Internet

You will be asked whether you want to connect to the internet. If you followed Shrink
the Windows Partition correctly then you should already be connected.

At this point, you might want to choose to disconnect from the internet and select the
option I don't want to connect to a wi-fi network right now.

This all depends on your internet connection speed.

If you have a great internet connection stay connected and click Continue.

If you have a poor internet connection then you might choose to disconnect otherwise
the installer will attempt to download updates as you go along and this will lengthen the
installation process.

Note: If you decide not to be connected to the

internet then you will need another way to read
this guide — a tablet, or another computer
perhaps.
Preparing to Install Ubuntu

Before you continue with the installation you will receive a checklist to show how well
prepared you are for installing Ubuntu as follows:

 Do you have at least 7.1 gigabytes of hard drive space?

 Are you connected to a power supply?
 Are you connected to the internet?

You can get away without being connected to the internet as discussed earlier.

Note: There is a checkbox at the bottom of the screen which lets you
install third party software for playing MP3s and watching Flash videos.
It is entirely optional as to whether you choose to check this box. You
can install the necessary plugins after the installation is complete by
installing the Ubuntu Restricted Extras package and this is my preferred
option.
Choose Your Installation Type

The Installation Type screen is where you get to choose whether to install Ubuntu on its
own or whether to dual boot with Windows.

There are three main options:

 Install Ubuntu Alongside Windows 7.

 Erase Disk And Install Ubuntu.
 Something Else.

It is perfectly acceptable to choose the Install Ubuntu Alongside Windows 7 option

and click Continue.

If you choose to do this move on to Write Changes to Disks.

On the next screen, I will show you how to create multiple partitions to separate your
Ubuntu partition from your home partition.

Note: There are two checkboxes on the installation type

screen. The first one allows you to encrypt your home folder.
There is a common myth that a username and password is all you need to secure your
data. Anybody who has access to your physical machine can get at all the data on the
hard drive (whether you use Windows or Linux).

The only real protection is to encrypt your hard drive.

Create Partitions Manually

This step has been added for completeness and isn't entirely necessary. I find it
nice to have separate root, home, and swap partitions as it makes it easier for replacing
the version of Linux and when upgrading your system

To create your first partition,

1. Choose the free space and click on the plus symbol.

2. Choose the logical partition type and set the amount of space that you wish to give to
Ubuntu. The size you give to the partition will depend on how much space you have to
start with. I chose 50 gigabytes which is a bit of overkill but leaves enough room for
growth.
3. The Use As dropdown lets you set the file system used. There are lots of different file
systems available for Linux but in this instance stick with ext4. Future guides will
highlight the available Linux file systems and the benefits of using each one.
4. Choose / as the mount point and click OK.
5. When you are back at the partitioning screen, find the remaining free space and click
on the plus symbol again to create a new partition. The home partition is used to store
documents, music, videos, photos and other files. It is also used to store user specific
settings. Generally, you should give the rest of the space to the home partition minus a
small amount for a swap partition.
Swap partitions are a contentious subject and everybody has their own opinion as to
how much space they should take up.

Make your home partition use the rest of the space minus the amount of memory that
your computer has.

For example, if you have 300000 megabytes (i.e 300 gigabytes) and you have 8
gigabytes of memory enter 292000 into the box. (300 - 8 is 292. 292 gigabytes is
292000 megabytes)

1. Choose a logical partition as the type.

2. Choose the beginning of this space as the location. As before EXT4 can be selected
as the file system.
3. Now select /home as the mount point.
4. Click OK.

The final partition to create is the swap partition.

Some people say you don't need a swap partition at all, others say that it should be the
same size as memory and some people say it should be 1.5 times the amount of
memory.

The swap partition is used to store idle processes when memory is running low.
Generally speaking, if there is a lot of swap activity going on then you are thrashing your
machine and if this is happening regularly you should maybe think about increasing the
amount of memory in your computer.

The swap partition was important in the past when computers used to frequently run out
of memory but nowadays unless you are doing some serious number crunching or
video editing it is unlikely that you will run out of memory.

Personally, I always create a swap partition because hard drive space isn't that costly
and should I ever decide to make a huge video that uses up all my available
memory then I will be glad that I created that swap space rather than letting the
computer crash unceremoniously.

1. Leave the size as the rest of the disk and change the use as box to Swap Area.
2. Click OK to continue.
3. The final step is to choose where to install the bootloader. There is a dropdown list on
the installation type screen which lets you choose where to install the bootloader. It is
important that you set this to the hard drive where you are installing Ubuntu. Generally
speaking, leave the default option of /dev/sda.
Note: Do not choose /dev/sda1 or any other number (i.e. /dev/sda5). It has to be
/dev/sda or /dev/sdbetc depending where Ubuntu is being installed.
4. Click Install Now.
Write the Changes to Disks

A warning message will appear stating that partitions are about to be created.

Warning:This is the point of no return. If you haven't made

a backup as stated in step 1 consider choosing the Go
Back option and canceling the
installation. Clicking Continue should only install Ubuntu to the
space created in step 2 but if any mistakes have been made
there is no way to change it after this point.

Click Continue when you are ready to install Ubuntu.

Choose Your Timezone

Choose your timezone by clicking where you live on the map provided and click Continue.

Choose Keyboard Layout

Choose your keyboard layout by selecting the language in the left pane and then the
physical layout in the right pane.

You can test the keyboard layout by entering text into the box provided.

Note: The detect keyboard layout button attempts to

match your keyboard automatically.

After you have chosen your keyboard layout click Continue.

Add A User

A default user needs to be set up.

Ubuntu doesn't have a root password. Instead, users have to be added to a group to
enable them to use "sudo" to run administer
ative commands.

The user created on this screen will automatically be added to the "sudoers" group and
will be able to perform any task on the computer.

1. Enter the name of the user and a name for the computer so that it can be
recognized on a home network.
2. Now create a username and enter it.
3. Repeat a password to be associated with the user.
4. The computer can be set up to log in automatically to Ubuntu or to require the
user to login with the username and password combination.
5. Finally, you get a chance to encrypt the home folder of the user to protect the
files that are stored there.
6. Click Continue.

Complete The Installation

The files will now be copied to your computer and Ubuntu will be installed.

You will be asked whether you want to restart your computer or continue testing.

Restart your computer and remove either the DVD or USB drive (depending on which
one you used).
When your computer reboots a menu should appear with options for Windows and
Ubuntu.

Try Windows first and make sure that everything still works.

Reboot again but this time choose Ubuntu from the menu. Make sure that Ubuntu
boots up. You should now have a fully working dual booting system with Windows 7 and
Ubuntu Linux.

The journey does not stop here, though. For example, you can read how to install
the Java Runtime and Development Kit on Ubuntu.