* (c)2002 Solidworks Corp.

* HoleWizard Callout Format Definition File

* Created: July 4, 2002
**
* delimiter ; breaks format into callout line 1; dimtext line 2; and callout line 3
or more as needed
* \ character indicates continuation of callout to next line, * character indicates
comment line
* additional editing related comments are at the bottom of this file.
**
**
***********************************************************************************
***************
**NO-NUMBER-OF-INSTANCES
**
[ADVANCE VALVES]
** COUNTERBORED HOLES
**
COUNTERBORE-BLIND=<MOD-DIAM> <hw-diam> <HOLE-DEPTH> <hw-depth>;\
<HOLE-SPOT><MOD-DIAM> <hw-cbdia>
<HOLE-DEPTH> <hw-cbdepth>
*with underhead csink*
COUNTERBORE-BLIND(csms)=<MOD-DIAM> <hw-diam> <HOLE-DEPTH> <hw-depth>;\
<HOLE-SPOT><MOD-DIAM> <hw-
cbdia> <HOLE-DEPTH> <hw-cbdepth>;\
<HOLE-SINK><MOD-DIAM> <hw-
midcsdia> X <hw-midcsang>
*with nearside csink*
COUNTERBORE-BLIND(csns)=<MOD-DIAM> <hw-diam> <HOLE-DEPTH> <hw-depth>;\
<HOLE-SPOT><MOD-DIAM> <hw-cbdia> <HOLE-DEPTH> <hw-
cbdepth>;\
<HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-
msgnearside>
*with near and underhead csinks*
COUNTERBORE-BLIND(csnm)=<MOD-DIAM> <hw-diam> <HOLE-DEPTH> <hw-depth>;\
<HOLE-SPOT><MOD-DIAM> <hw-cbdia> <HOLE-DEPTH> <hw-
cbdepth>;\
<HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-
msgnearside>;\
<HOLE-SINK><MOD-DIAM> <hw-midcsdia> X <hw-midcsang>, <hw-
msgmidside>
COUNTERBORE-THRU=<MOD-DIAM> <hw-thruholedia> <hw-thru>;\
<HOLE-SPOT><MOD-DIAM> <hw-cbdia> <HOLE-DEPTH> <hw-cbdepth>
*with farside countersink*
COUNTERBORE-THRU(csfs)=<MOD-DIAM> <hw-thruholedia> <hw-thru>;\
<HOLE-SPOT><MOD-DIAM> <hw-cbdia> <HOLE-DEPTH> <hw-cbdepth>;\
<HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-
msgfarside>
*with underhead csink*
COUNTERBORE-THRU(csms)=<MOD-DIAM> <hw-thruholedia> <hw-thru>;\
<HOLE-SPOT><MOD-DIAM> <hw-cbdia> <HOLE-DEPTH> <hw-cbdepth>;\
<HOLE-SINK><MOD-DIAM> <hw-midcsdia> X <hw-midcsang>, <hw-
msgmidside>
*with underhead and far csinks*
COUNTERBORE-THRU(csmf)=<MOD-DIAM> <hw-thruholedia> <hw-thru>;\
<HOLE-SPOT><MOD-DIAM> <hw-cbdia> <HOLE-DEPTH> <hw-cbdepth>;\
<HOLE-SINK><MOD-DIAM> <hw-midcsdia> X <hw-midcsang>, <hw-
msgmidside>;\
<HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-
msgfarside>
*with nearside csink*
COUNTERBORE-THRU(csns)=<MOD-DIAM> <hw-thruholedia> <hw-thru>;\
<HOLE-SPOT><MOD-DIAM> <hw-cbdia> <HOLE-DEPTH> <hw-cbdepth>;\
<HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-
msgnearside>
*with near and farside csinks*
COUNTERBORE-THRU(csnf)=<MOD-DIAM> <hw-thruholedia> <hw-thru>;\
<HOLE-SPOT><MOD-DIAM> <hw-cbdia> <HOLE-DEPTH> <hw-cbdepth>;\
<HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-
msgnearside>;\
<HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-
msgfarside>
*with near and underhead csinks*
COUNTERBORE-THRU(csnm)=<MOD-DIAM> <hw-thruholedia> <hw-thru>;\
<HOLE-SPOT><MOD-DIAM> <hw-cbdia> <HOLE-DEPTH> <hw-cbdepth>;\
<HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-
msgnearside>;\
<HOLE-SINK><MOD-DIAM> <hw-midcsdia> X <hw-midcsang>, <hw-
msgmidside>
*with all 3 csinks*
COUNTERBORE-THRU(csal)=<MOD-DIAM> <hw-thruholedia> <hw-thru>;\
<HOLE-SPOT><MOD-DIAM> <hw-cbdia> <HOLE-DEPTH> <hw-
cbdepth>;\
<HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-
msgnearside>;\
<HOLE-SINK><MOD-DIAM> <hw-midcsdia> X <hw-midcsang>, <hw-
msgmidside>;\
<HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-
msgfarside>
**
** PLAIN HOLES
**
HOLE-BLIND=;<MOD-DIAM> <hw-diam> <HOLE-DEPTH> <hw-depth>
*with nearside csink*
HOLE-BLIND(csns)=;<MOD-DIAM> <hw-diam> <HOLE-DEPTH> <hw-depth>;\
<HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-
msgnearside>
HOLE-THRU=;<MOD-DIAM> <hw-diam> <hw-thru>
*with farside csink*
HOLE-THRU(csfs)=;<MOD-DIAM> <hw-diam> <hw-thru>;\
<HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-msgfarside>
*with nearside csink*
HOLE-THRU(csns)=;<MOD-DIAM> <hw-diam> <hw-thru>;\
<HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-
msgnearside>
*with both csinks*
HOLE-THRU(csnf)=;<MOD-DIAM> <hw-diam> <hw-thru>;\
<HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-
msgnearside>;\
<HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-msgfarside>
**
** COUNTERSUNK HOLES
**
COUNTERSINK-BLIND=<MOD-DIAM> <hw-diam> <HOLE-DEPTH> <hw-depth>;\
<HOLE-SINK><MOD-DIAM> <hw-csdia> X <hw-csang>
*with added head clearance as cbore*
COUNTERSINK-BLIND(headclr)=<MOD-DIAM> <hw-diam> <HOLE-DEPTH> <hw-depth>;\
<HOLE-SINK><MOD-DIAM> <hw-csdia> X <hw-csang>;\
 <HOLE-SPOT><MOD-DIAM> <hw-csdia> <HOLE-DEPTH> <hw-
headclr>
COUNTERSINK-THRU=<MOD-DIAM> <hw-thruholedia> <hw-thru>;\
<HOLE-SINK><MOD-DIAM> <hw-csdia> X <hw-csang>
*with farside csink*
COUNTERSINK-THRU(csfs)=<MOD-DIAM> <hw-thruholedia> <hw-thru>;\
<HOLE-SINK><MOD-DIAM> <hw-csdia> X <hw-csang>;\
<HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-
msgfarside>
*with added head clearance as cbore*
COUNTERSINK-THRU(headclr)=<MOD-DIAM> <hw-thruholedia> <hw-thru>;\
<HOLE-SINK><MOD-DIAM> <hw-csdia> X <hw-csang>;\
<HOLE-SPOT><MOD-DIAM> <hw-csdia> <HOLE-DEPTH> <hw-
headclr>
*with head clearance and far side csink*
COUNTERSINK-THRU(hcfs)=<MOD-DIAM> <hw-thruholedia> <hw-thru>;\
<HOLE-SINK><MOD-DIAM> <hw-csdia> X <hw-csang>;\
<HOLE-SPOT><MOD-DIAM> <hw-csdia> <HOLE-DEPTH> <hw-headclr>;\
<HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-
msgfarside>
**
** TAPPED HOLES
**
TAP-BLIND=<MOD-DIAM> <hw-tapdrldia> <HOLE-DEPTH> <hw-tapdrldepth>;\
TAP <hw-threaddesc> <HOLE-DEPTH> <hw-threaddepth>
*with nearside csink*
TAP-BLIND(csns)=<MOD-DIAM> <hw-tapdrldia> <HOLE-DEPTH> <hw-tapdrldepth>;\
TAP <hw-threaddesc> <HOLE-DEPTH> <hw-threaddepth>;\
<HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-msgnearside>
*when last hole in hole series*
TAP-BLIND(series)=<MOD-DIAM> <hw-tapdrldia> <HOLE-DEPTH> <hw-tapdrldepth>;\
TAP <hw-threaddesc> <HOLE-DEPTH> <hw-threaddepth>
*with cosmetic thread*
TAP-BLIND(ct)=<MOD-DIAM> <hw-tapdrldia> <HOLE-DEPTH> <hw-tapdrldepth>;\
TAP <hw-threaddesc> <HOLE-DEPTH> <hw-threaddepth>
*with cosmetic thread and nearside csink*
TAP-BLIND(ctcsns)=<MOD-DIAM> <hw-tapdrldia> <HOLE-DEPTH> <hw-tapdrldepth>;\
TAP <hw-threaddesc> <HOLE-DEPTH> <hw-threaddepth>;\
<HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-
msgnearside>
*drilled and tapped thru*
TAP-THRU(tt)=<MOD-DIAM> <hw-thrutapdrldia> <hw-thru>;\
TAP <hw-threaddesc> <hw-thru>
*with nearside csink*
TAP-THRU(ttcsns)=<MOD-DIAM> <hw-thrutapdrldia> <hw-thru>;\
TAP <hw-threaddesc> <hw-thru>;\
<HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-
msgnearside>
*with farside csink*
TAP-THRU(ttcsfs)=<MOD-DIAM> <hw-thrutapdrldia> <hw-thru>;\
TAP <hw-threaddesc> <hw-thru>;\
<HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-
msgfarside>
*with both csinks*
TAP-THRU(ttcsnf)=<MOD-DIAM> <hw-thrutapdrldia> <hw-thru>;\
TAP <hw-threaddesc> <hw-thru>;\
<HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-
msgnearside>;\
<HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-
msgfarside>
*drilled thru but with blind threads*
TAP-DRILLTHRU=<MOD-DIAM> <hw-tapdrldia> <hw-thru>;\
TAP <hw-threaddesc> - 6H <HOLE-DEPTH> <hw-threaddepth>
*with cosmetic thread and drilled and tapped thru*
TAP-DRILLTHRU(cstt)=<MOD-DIAM> <hw-thrutapdrldia> <hw-thru>;\
TAP <hw-threaddesc> <hw-thru>
*with farside csink*
TAP-DRILLTHRU(csfs)=<MOD-DIAM> <hw-tapdrldia> <hw-thru>;\
TAP <hw-threaddesc> <HOLE-DEPTH> <hw-threaddepth>;\
<HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-
msgfarside>
*with nearside csink*
TAP-DRILLTHRU(csns)=<MOD-DIAM> <hw-tapdrldia> <hw-thru>;\
TAP <hw-threaddesc> <HOLE-DEPTH> <hw-threaddepth>;\
<HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-
msgnearside>
*with both csinks*
TAP-DRILLTHRU(csnf)=<MOD-DIAM> <hw-tapdrldia> <hw-thru>;\
TAP <hw-threaddesc> <HOLE-DEPTH> <hw-threaddepth>;\
<HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-
msgnearside>;\
<HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-
msgfarside>
*with cosmetic thread*
TAP-DRILLTHRU(ct)=<MOD-DIAM> <hw-tapdrldia> <hw-thru>;\
TAP <hw-threaddesc> <HOLE-DEPTH> <hw-threaddepth>
*with cosmetic thread and nearside csink*
TAP-DRILLTHRU(ctcsns)=<MOD-DIAM> <hw-tapdrldia> <hw-thru>;\
TAP <hw-threaddesc> <HOLE-DEPTH> <hw-threaddepth>;\
<HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-
msgnearside>
TAP-DRILLTHRU(cttcsns)=<MOD-DIAM> <hw-tapdrldia> <hw-thru>;\
TAP <hw-threaddesc> <hw-threadclass>
<hw-thru>;\
<HOLE-SINK><MOD-DIAM> <hw-nscsdia> X
<hw-nscsang>, <hw-msgnearside>
*with cosmetic thread and farside csink*
TAP-DRILLTHRU(ctcsfs)=<MOD-DIAM> <hw-tapdrldia> <hw-thru>;\
TAP <hw-threaddesc> <HOLE-DEPTH> <hw-threaddepth>;\
<HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-
msgfarside>
*with cosmetic thread and both csinks*
TAP-DRILLTHRU(ctcsnf)=<MOD-DIAM> <hw-tapdrldia> <hw-thru>;\
TAP <hw-threaddesc> <HOLE-DEPTH> <hw-threaddepth>;\
<HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-
msgnearside>;\
<HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-
msgfarside>
**
** COSMETIC THREAD CALLOUTS
**
MACHINE-THREADS-INTERNAL=<cthrd-size> <cthrd-type>
MACHINE-THREADS-EXTERNAL=<cthrd-size> <cthrd-type>
STRAIGHT-PIPE-TAPPED-THREAD-INTERNAL=<cthrd-size> <cthrd-type>
STRAIGHT-PIPE-TAPPED-THREAD-EXTERNAL=<cthrd-size> <cthrd-type>
**
***********************************************************************************
***************
[ADVANCE VALVES INCHES]
** COUNTERBORED HOLES
**
COUNTERBORE-BLIND=<MOD-DIAM> <hw-diam> <HOLE-DEPTH> <hw-depth>;\
<HOLE-SPOT><MOD-DIAM> <hw-cbdia>
<HOLE-DEPTH> <hw-cbdepth>
*with underhead csink*
COUNTERBORE-BLIND(csms)=<MOD-DIAM> <hw-diam> <HOLE-DEPTH> <hw-depth>;\
<HOLE-SPOT><MOD-DIAM> <hw-
cbdia> <HOLE-DEPTH> <hw-cbdepth>;\
<HOLE-SINK><MOD-DIAM> <hw-
midcsdia> X <hw-midcsang>
*with nearside csink*
COUNTERBORE-BLIND(csns)=<MOD-DIAM> <hw-diam> <HOLE-DEPTH> <hw-depth>;\
<HOLE-SPOT><MOD-DIAM> <hw-
cbdia> <HOLE-DEPTH> <hw-cbdepth>;\
<HOLE-SINK><MOD-DIAM> <hw-
nscsdia> X <hw-nscsang>, <hw-msgnearside>
*with near and underhead csinks*
COUNTERBORE-BLIND(csnm)=<MOD-DIAM> <hw-diam> <HOLE-DEPTH> <hw-depth>;\
<HOLE-SPOT><MOD-DIAM> <hw-
cbdia> <HOLE-DEPTH> <hw-cbdepth>;\
<HOLE-SINK><MOD-DIAM> <hw-
nscsdia> X <hw-nscsang>, <hw-msgnearside>;\
<HOLE-SINK><MOD-DIAM> <hw-
midcsdia> X <hw-midcsang>, <hw-msgmidside>
COUNTERBORE-THRU=<MOD-DIAM> <hw-thruholedia> <hw-thru>;\
<HOLE-SPOT><MOD-DIAM> <hw-cbdia>
<HOLE-DEPTH> <hw-cbdepth>
*with farside countersink*
COUNTERBORE-THRU(csfs)=<MOD-DIAM> <hw-thruholedia> <hw-thru>;\
<HOLE-SPOT><MOD-DIAM> <hw-
cbdia> <HOLE-DEPTH> <hw-cbdepth>;\
<HOLE-SINK><MOD-DIAM> <hw-
fscsdia> X <hw-fscsang>, <hw-msgfarside>
*with underhead csink*
COUNTERBORE-THRU(csms)=<MOD-DIAM> <hw-thruholedia> <hw-thru>;\
<HOLE-SPOT><MOD-DIAM> <hw-
cbdia> <HOLE-DEPTH> <hw-cbdepth>;\
<HOLE-SINK><MOD-DIAM> <hw-
midcsdia> X <hw-midcsang>, <hw-msgmidside>
*with underhead and far csinks*
COUNTERBORE-THRU(csmf)=<MOD-DIAM> <hw-thruholedia> <hw-thru>;\
<HOLE-SPOT><MOD-DIAM> <hw-
cbdia> <HOLE-DEPTH> <hw-cbdepth>;\
<HOLE-SINK><MOD-DIAM> <hw-
midcsdia> X <hw-midcsang>, <hw-msgmidside>;\
<HOLE-SINK><MOD-DIAM> <hw-
fscsdia> X <hw-fscsang>, <hw-msgfarside>
*with nearside csink*
COUNTERBORE-THRU(csns)=<MOD-DIAM> <hw-thruholedia> <hw-thru>;\
<HOLE-SPOT><MOD-DIAM> <hw-cbdia> <HOLE-DEPTH> <hw-cbdepth>;\
<HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-
msgnearside>
*with near and farside csinks*
COUNTERBORE-THRU(csnf)=<MOD-DIAM> <hw-thruholedia> <hw-thru>;\
<HOLE-SPOT><MOD-DIAM> <hw-cbdia> <HOLE-DEPTH> <hw-cbdepth>;\
<HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-
msgnearside>;\
 <HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-
msgfarside>
*with near and underhead csinks*
COUNTERBORE-THRU(csnm)=<MOD-DIAM> <hw-thruholedia> <hw-thru>;\
<HOLE-SPOT><MOD-DIAM> <hw-cbdia> <HOLE-DEPTH> <hw-cbdepth>;\
<HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-
msgnearside>;\
<HOLE-SINK><MOD-DIAM> <hw-midcsdia> X <hw-midcsang>, <hw-
msgmidside>
*with all 3 csinks*
COUNTERBORE-THRU(csal)=<MOD-DIAM> <hw-thruholedia> <hw-thru>;\
<HOLE-SPOT><MOD-DIAM> <hw-cbdia> <HOLE-DEPTH> <hw-cbdepth>;\
<HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-
msgnearside>;\
<HOLE-SINK><MOD-DIAM> <hw-midcsdia> X <hw-midcsang>, <hw-
msgmidside>;\
<HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-
msgfarside>
**
** PLAIN HOLES
**
HOLE-BLIND=;<MOD-DIAM> <hw-diam> <HOLE-DEPTH> <hw-depth>
*with nearside csink*
HOLE-BLIND(csns)=;<MOD-DIAM> <hw-diam> <HOLE-DEPTH> <hw-depth>;\
<HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-msgnearside>
HOLE-THRU=;<MOD-DIAM> <hw-diam> <hw-thru>
*with farside csink*
HOLE-THRU(csfs)=;<MOD-DIAM> <hw-diam> <hw-thru>;\
<HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-
msgfarside>
*with nearside csink*
HOLE-THRU(csns)=;<MOD-DIAM> <hw-diam> <hw-thru>;\
<HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-msgnearside>
*with both csinks*
HOLE-THRU(csnf)=;<MOD-DIAM> <hw-diam> <hw-thru>;\
<HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-
msgnearside>;\
<HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-
msgfarside>
**
** COUNTERSUNK HOLES
**
COUNTERSINK-BLIND=<MOD-DIAM> <hw-diam> <HOLE-DEPTH> <hw-depth>;\
<HOLE-SINK><MOD-DIAM> <hw-csdia> X <hw-csang>
*with added head clearance as cbore*
COUNTERSINK-BLIND(headclr)=<MOD-DIAM> <hw-diam> <HOLE-DEPTH> <hw-depth>;\
<HOLE-SINK><MOD-DIAM> <hw-csdia> X <hw-csang>;\
<HOLE-SPOT><MOD-DIAM> <hw-csdia> <HOLE-DEPTH> <hw-headclr>
COUNTERSINK-THRU=<MOD-DIAM> <hw-thruholedia> <hw-thru>;\
<HOLE-SINK><MOD-DIAM> <hw-csdia> X <hw-csang>
*with farside csink*
COUNTERSINK-THRU(csfs)=<MOD-DIAM> <hw-thruholedia> <hw-thru>;\
<HOLE-SINK><MOD-DIAM> <hw-csdia> X <hw-csang>;\
<HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-
msgfarside>
*with added head clearance as cbore*
COUNTERSINK-THRU(headclr)=<MOD-DIAM> <hw-thruholedia> <hw-thru>;\
<HOLE-SINK><MOD-DIAM> <hw-csdia> X <hw-csang>;\
<HOLE-SPOT><MOD-DIAM> <hw-csdia> <HOLE-DEPTH> <hw-headclr>
*with head clearance and far side csink*
COUNTERSINK-THRU(hcfs)=<MOD-DIAM> <hw-thruholedia> <hw-thru>;\
<HOLE-SINK><MOD-DIAM> <hw-csdia> X <hw-csang>;\
<HOLE-SPOT><MOD-DIAM> <hw-csdia> <HOLE-DEPTH> <hw-
headclr>;\
<HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-
msgfarside>
**
** TAPPED HOLES
**
TAP-BLIND=<MOD-DIAM> <hw-tapdrldia> <HOLE-DEPTH> <hw-tapdrldepth>;\
<hw-threaddesc> <hw-threadclass> <HOLE-DEPTH> <hw-threaddepth>
*with nearside csink*
TAP-BLIND(csns)=<MOD-DIAM> <hw-tapdrldia> <HOLE-DEPTH> <hw-tapdrldepth>;\
<hw-threaddesc> <hw-threadclass> <HOLE-DEPTH> <hw-
threaddepth>;\
<HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-
msgnearside>
*when last hole in hole series*
TAP-BLIND(series)=<MOD-DIAM> <hw-tapdrldia> <HOLE-DEPTH> <hw-tapdrldepth>;\
<hw-threaddesc> <hw-threadclass> <HOLE-DEPTH> <hw-threaddepth>
*with cosmetic thread*
TAP-BLIND(ct)=<MOD-DIAM> <hw-tapdrldia> <HOLE-DEPTH> <hw-tapdrldepth>;\
<hw-threaddesc> <hw-threadclass> <HOLE-DEPTH> <hw-threaddepth>
*with cosmetic thread and nearside csink*
TAP-BLIND(ctcsns)=<MOD-DIAM> <hw-tapdrldia> <HOLE-DEPTH> <hw-tapdrldepth>;\
<hw-threaddesc> <hw-threadclass> <HOLE-DEPTH> <hw-threaddepth>;\
<HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-msgnearside>
*drilled and tapped thru*
TAP-THRU(tt)=<MOD-DIAM> <hw-thrutapdrldia> <hw-thru>;\
<hw-threaddesc> <hw-threadclass> <hw-thru>
*with nearside csink*
TAP-THRU(ttcsns)=<MOD-DIAM> <hw-thrutapdrldia> <hw-thru>;\
<hw-threaddesc> <hw-threadclass> <hw-thru>;\
<HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-
msgnearside>
*with farside csink*
TAP-THRU(ttcsfs)=<MOD-DIAM> <hw-thrutapdrldia> <hw-thru>;\
<hw-threaddesc> <hw-threadclass> <hw-thru>;\
<HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-
msgfarside>
*with both csinks*
TAP-THRU(ttcsnf)=<MOD-DIAM> <hw-thrutapdrldia> <hw-thru>;\
<hw-threaddesc> <hw-threadclass> <hw-thru>;\
<HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-
msgnearside>;\
<HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-
msgfarside>
*drilled thru but with blind threads*
TAP-DRILLTHRU=<MOD-DIAM> <hw-tapdrldia> <hw-thru>;\
<hw-threaddesc> <hw-threadclass> <HOLE-DEPTH> <hw-threaddepth>
*with cosmetic thread and drilled and tapped thru*
TAP-DRILLTHRU(cstt)=<MOD-DIAM> <hw-thrutapdrldia> <hw-thru>;\
<hw-threaddesc> <hw-threadclass> <hw-thru>
*with farside csink*
TAP-DRILLTHRU(csfs)=<MOD-DIAM> <hw-tapdrldia> <hw-thru>;\
<hw-threaddesc> <hw-threadclass> <HOLE-DEPTH> <hw-threaddepth>;\
<HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>,
<hw-msgfarside>
*with nearside csink*
TAP-DRILLTHRU(csns)=<MOD-DIAM> <hw-tapdrldia> <hw-thru>;\
<hw-threaddesc> <hw-threadclass> <HOLE-DEPTH> <hw-threaddepth>;\
<HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-
msgnearside>
*with both csinks*
TAP-DRILLTHRU(csnf)=<MOD-DIAM> <hw-tapdrldia> <hw-thru>;\
<hw-threaddesc> <hw-threadclass> <HOLE-DEPTH> <hw-threaddepth>;\
<HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-
msgnearside>;\
<HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-
msgfarside>
*with cosmetic thread*
TAP-DRILLTHRU(ct)=<MOD-DIAM> <hw-tapdrldia> <hw-thru>;\
<hw-threaddesc> <hw-threadclass> <HOLE-DEPTH> <hw-threaddepth>
*with cosmetic thread and nearside csink*
TAP-DRILLTHRU(ctcsns)=<MOD-DIAM> <hw-tapdrldia> <hw-thru>;\
<hw-threaddesc> <hw-threadclass> <HOLE-DEPTH> <hw-
threaddepth>;\
<HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-
msgnearside>
TAP-DRILLTHRU(cttcsns)=<MOD-DIAM> <hw-tapdrldia> <hw-thru>;\
<hw-threaddesc> <hw-threadclass> <hw-
thru>;\
<HOLE-SINK><MOD-DIAM> <hw-nscsdia> X
<hw-nscsang>, <hw-msgnearside>
*with cosmetic thread and farside csink*
TAP-DRILLTHRU(ctcsfs)=<MOD-DIAM> <hw-tapdrldia> <hw-thru>;\
<hw-threaddesc> <hw-threadclass> <HOLE-DEPTH> <hw-
threaddepth>;\
<HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-
msgfarside>
*with cosmetic thread and both csinks*
TAP-DRILLTHRU(ctcsnf)=<MOD-DIAM> <hw-tapdrldia> <hw-thru>;\
<hw-threaddesc> <hw-threadclass> <HOLE-DEPTH>
<hw-threaddepth>;\
<HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-
msgnearside>;\
<HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-
msgfarside>
**
** PIPE TAPPED HOLES
**
PTAP-BLIND=<MOD-DIAM> <hw-tapdrldia> <HOLE-DEPTH> <hw-tapdrldepth>;\
<hw-fstsze> NPT
*with nearside csink*
PTAP-BLIND(csns)=<MOD-DIAM> <hw-tapdrldia> <HOLE-DEPTH> <hw-tapdrldepth>;\
<hw-fstsze> NPT;\
<HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-msgnearside>
PTAP-THRU=<MOD-DIAM> <hw-tapdrldia> <hw-thru>;\
<hw-fstsze> NPT
*with farside csink*
PTAP-THRU(csfs)=<MOD-DIAM> <hw-tapdrldia> <hw-thru>;\
<hw-fstsze> NPT;\
<HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-
msgfarside>
*with nearside csink*
PTAP-THRU(csns)=<MOD-DIAM> <hw-tapdrldia> <hw-thru>;\
<hw-fstsze> NPT;\
 <HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-msgnearside>
*with both csinks*
PTAP-THRU(csnf)=<MOD-DIAM> <hw-tapdrldia> <hw-thru>;\
<hw-fstsze> NPT;\
<HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-
msgnearside>;\
<HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-
msgfarside>
**
** COSMETIC THREAD CALLOUTS
**
MACHINE-THREADS-INTERNAL=<cthrd-size> <cthrd-type>
MACHINE-THREADS-EXTERNAL=<cthrd-size> <cthrd-type>
STRAIGHT-PIPE-TAPPED-THREAD-INTERNAL=<cthrd-size> <cthrd-type>
STRAIGHT-PIPE-TAPPED-THREAD-EXTERNAL=<cthrd-size> <cthrd-type>
**
***********************************************************************************
******************
*Each string right of the = above may be customized to suit with plain text entries

*or appropriate Hole Wizard variables. One variable may be used in place of
another.
*Hole Wizard variables are in lower case letters, and have the form: <hw-type>
*The items in capital letters are SolidWorks symbol names, and have the form: <MOD-
DIA>
*
*New entries left of the = above will not be used.
*Deleting any entries left of the = above, may result in associated holes having
blank hole callouts.
*
*Valid Hole Wizard variables are as follows:
*VARIABLE DESCRIPTION*
*<hw-type> Type
*<hw-std> Standard
*<hw-fsttyp> Fastener Type
*<hw-fstsze> Fastener Size
*
*<hw-cbdepth> Counterbore Depth
*<hw-cbdia> Counterbore Diameter
*<hw-cdrlang> Counterdrill Angle
*<hw-cdrldepth> Counterdrill Depth
*<hw-cdrldia> Counterdrill Diameter
*<hw-csang> Countersink Angle
*<hw-csdia> Countersink Diameter
*<hw-depth> Depth
*<hw-diam> Diameter
*<hw-drlang> Drill Angle
*<hw-endcond> End Condition
*<hw-fscsang> Far Side Countersink Angle
*<hw-fscsdia> Far Side Countersink Diameter
*<hw-headclr> Head Clearance
*<hw-holedia> Hole Diameter
*<hw-holedepth> Hole Depth
*<hw-mjrdia> Major Diameter
*<hw-midcsang> Middle Countersink Angle
*<hw-midcsdia> Middle Countersink Diameter
*<hw-minordia> Minor Diameter
*<hw-nscsang> Near Side Countersink Angle
*<hw-nscsdia> Near Side Countersink Diameter
*<hw-tapdrldepth> Tap Drill Depth
*<hw-tapdrldia> Tap Drill Diameter
*<hw-threadang> Thread Angle
*<hw-threaddepth> Thread Depth
*<hw-threaddesc> Thread Description
*<hw-threaddia> Thread Diameter
*<hw-threadclass> Thread Class (1B, 2B or 3B, applies to Ansi Inch holes only)
*<hw-threadseries> Thread Series
*<hw-threadsize> Thread Size
*<hw-thruholedepth> Thru Hole Depth
*<hw-thruholedia> Thru Hole Diameter
*<hw-thrutapdrldp> Thru Tap Drill Depth
*<hw-thrutapdrldia> Thru Tap Drill Diameter
*
*<hw-descrp> Description
*
* Cosmetic thread callout variables
*
*<cthrd-std> Standard
*<cthrd-type> Type
*<cthrd-size> Size
*<cthrd-major-dia> Major Diameter
*<cthrd-minor-dia> Minor Diameter
*<cthrd-depth> Thread Depth