DRAFT Not for New Designs

DRAFT
TQQ0041
Band 41 Receive BAW Filter

Applications
• Band 41 TD-LTE
• General Purpose Wireless

2 x 2 x 0.83 mm leadless SMT Package

Product Features Functional Block Diagram

• Highly Selective BAW Filter
• Low Insertion Loss Over Band and Operating
Conditions
1 2
• Internally Match for Single Ended 50 Ohm Operation
Input Output
• Excellent Wi-Fi rejection
• Performance -20°C to +85°C
• Small Size: 2 x 2 x 0.83 mm SMT Package 3 Ground
• RoHS compliant, Pb-free

General Description Pin Configuration

The TQQ0041 is a high-performance Bulk Acoustic Wave Pin No. Label
(BAW) Rx filter designed to meet the strict LTE rejection
1 Input
requirements for use in B41.
2 Output (to Antenna)
TQQ0041 is specifically designed to meet the high 3 Ground*
performance expectations for insertion loss and rejection in *Note, see application section for details on optimal
LTE transmit systems under all operating conditions. grounding
The TQQ0041 uses common module packaging techniques
to achieve the industry standard 2.0 x 2.0 x 0.83 mm
footprint.

This module is part of TriQuint’s wide portfolio of RF

filters. Ordering Information
Part No. Description
TQQ0041 Band 41 Receive BAW Filter
TQQ0041-EVB Evaluation board
Standard T/R size = 2500 pieces per reel

DRAFT
Datasheet: Rev K 10-26-2017
© 2014 TriQuint
- 1 of 8 -
DRAFT
Disclaimer: Subject to change without notice
www.triquint.com
Not for New Designs
DRAFT Not for New Designs DRAFT
TQQ0041
Band 41 Receive BAW Filter

Absolute Maximum Ratings Recommended Operating Conditions

Parameter Rating Parameter Min Typ Max Units
Storage Temperature -40 to 85°C TCASE -20 +85 °C
Input Pwr (in pass-band, CW signal) +15dBm Electrical specifications are measured at specified test
conditions.
Operation of this device outside the parameter ranges
given above may cause permanent damage.

Electrical Specifications − Band 41 (1)

-20°C +25°C +85°C
Parameter Freq. Band Min Max Min Typ(2) Max Min Max Units
2496 – 2500 MHz - 4.8 - 3.0 - - 3.2 dB
Insertion Loss 2500 – 2530 MHz - 3.3 - 2.6 - - 2.9 dB
2530 – 2690 MHz - 2.4 - 2.1 - - 3.3 dB
Passband Ripple 2496 – 2690 MHz - 3.2 - 1.8 - - 2.4 dB
Return Loss In 2496 – 2690 MHz 8.0 - 8.0 10.8 - 8.0 - dB
Return Loss Out 2496 – 2690 MHz 8.0 - 8.0 10.8 - 8.0 - dB
10 - 1564 MHz 32 - 32 35 - 32 - dB
1565 - 1615 MHz 37 - 37 40 - 37 - dB
1880 – 1920 MHz 19 - 19 22 - 18 - dB
2400 - 2470 MHz 38 - 36 43 - 30 - dB
2470 - 2478 MHz 32 - 26 34 - 11 - dB
Attenuation 2478 - 2482 MHz(3) 25 - 14 26 - 7 - dB
2775 - 3900 MHz 13 - 13 17 - 13 - dB
4200 - 4992 MHz 29 - 29 32 - 29 - dB
4992 - 5380 MHz 30 - 30 33 - 30 - dB
5381 - 7000 MHz 24 - 24 27 - 24 - dB
7000 - 8000 MHz 20 - 20 23 - 20 - dB
Notes:
1. All specifications are based on the TriQuint schematic for the main reference design shown on page 3
2. Typical values are values of a nominal part.
3. The integrated value over the range is given.

DRAFT
Datasheet: Rev K 10-26-2017
© 2014 TriQuint
- 2 of 8 -
DRAFT
Disclaimer: Subject to change without notice
www.triquint.com
Not for New Designs
DRAFT Not for New Designs DRAFT
TQQ0041
Band 41 Receive BAW Filter

TQQ0041-EVB Evaluation Board

OUT
IN 961022
REV -

Notes:
1. See PCB Mounting Pattern for recommended layout.

Bill of Material – TQQ0041-PCB

Reference Des. Value Description Manuf. Part Number
U1 n/a Band 41 Receive BAW Filter TriQuint TQQ0041
n/a n/a Printed Circuit Board TriQuint 961022
n/a n/a SMA Edge Connector Radiall 9602-1111-018

Evaluation Board PCB Information

TriQuint PCB 961022 Material and Stack-up

1 oz. Cu top layer

0.004" Isola FR-370HR
1 oz. Cu inner layer
0.062" ± 0.004"
Finished Board Isola FR-370HR
Thickness

1 oz. Cu inner layer

0.004" Isola FR-370HR
1 oz. Cu bottom layer

DRAFT
Datasheet: Rev K 10-26-2017
© 2014 TriQuint
- 3 of 8 -
DRAFT
Disclaimer: Subject to change without notice
www.triquint.com
Not for New Designs
DRAFT Not for New Designs DRAFT
TQQ0041
Band 41 Receive BAW Filter

Performance Plots – Band 41

Test conditions unless otherwise noted: Temp= +25°C

DRAFT
Datasheet: Rev K 10-26-2017
© 2014 TriQuint
- 4 of 8 -
DRAFT
Disclaimer: Subject to change without notice
www.triquint.com
Not for New Designs
DRAFT Not for New Designs DRAFT
TQQ0041
Band 41 Receive BAW Filter

Mechanical Information
Package Marking and Dimensions
Marking: TriQuint Brand
Part number – TQQ0041

Top View

2.0±0.1

0.750 0.750
(1X) shape
4X 0.1±0.1 0.10 C A B

4X 0.1±0.1
0.750 0.900
2.0±0.1
0.400
0.750

0.900 Pin #1 Locator

0.400
(2X) 0.300x X 0.300y
Side View 0.10 C A B

Bottom View

Notes:
1. All dimensions are in millimeters. Angles are in degrees.
2. Dimension and tolerance formats conform to ASME Y14.4M-1994.
3. The terminal #1 identifier and terminal numbering conform to JESD 95-1 SPP-012.

DRAFT
Datasheet: Rev K 10-26-2017
© 2014 TriQuint
- 5 of 8 -
DRAFT
Disclaimer: Subject to change without notice
www.triquint.com
Not for New Designs
DRAFT Not for New Designs DRAFT
TQQ0041
Band 41 Receive BAW Filter

PCB Mounting Pattern

Metalization Soldermask

Stencil Aperture Style 1 Stencil Aperture Style 2

Notes:
1. All dimensions are in millimeters. Angles are in degrees.
2. Use 1 oz. copper minimum for top and bottom layer metal.

DRAFT
Datasheet: Rev K 10-26-2017
© 2014 TriQuint
- 6 of 8 -
DRAFT
Disclaimer: Subject to change without notice
www.triquint.com
Not for New Designs
DRAFT Not for New Designs DRAFT
TQQ0041
Band 41 Receive BAW Filter

Tape and Reel Information

Tape and reel specifications for this part are also available on the TriQuint website.
Standard T/R size = 5000 pieces per reel.

Feature Measure Symbol Size (in) Size (mm)

Length A0 0.091 2.3
Width B0 0.091 2.3
Cavity
Depth K0 0.039 1.0
Pitch P1 0.157 4.0
Centerline Cavity to Perforation - Length Direction P2 0.079 2.00
Distance Cavity to Perforation - Width Direction F 0.138 3.50
Cover Tape Width C 0.213 5.40
Carrier Tape Width W 0.315 8.00

DRAFT
Datasheet: Rev K 10-26-2017
© 2014 TriQuint
- 7 of 8 -
DRAFT
Disclaimer: Subject to change without notice
www.triquint.com
Not for New Designs
DRAFT Not for New Designs DRAFT
TQQ0041
Band 41 Receive BAW Filter

Product Compliance Information

ESD Sensitivity Ratings Solderability
Compatible with both lead-free (260°C maximum reflow
temperature) and tin/lead (245°C maximum reflow
Caution! ESD-Sensitive Device temperature) soldering processes.

Contact plating: Electrolytic Ni/Au

ESD Rating: Class 3A
Value: 5000 V RoHs Compliance
Test: Human Body Model (HBM) This part is compliant with EU 2002/95/EC RoHS
Standard: JEDEC Standard JESD22-A114 directive (Restrictions on the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment).
ESD Rating: Class IV
Value: 2000 V This product also has the following attributes:
Test: Charged Device Model (CDM) • Lead Free
Standard: JEDEC Standard JESD22-C101
• Halogen Free (Chlorine, Bromine)
• Antimony Free
MSL Rating • TBBP-A (C15H12Br402) Free
MSL Rating: Level 3 • PFOS Free
Test: 260°C convection reflow • SVHC Free
Standard: JEDEC Standard IPC/JEDEC J-STD-020

Contact Information
For the latest specifications, additional product information, worldwide sales and distribution locations, and information
about TriQuint:

Web: www.triquint.com Tel: +1.407.886.8860

Email: [email protected] Fax: +1.407.886.7061

For technical questions and application information:

Email: [email protected]

Important Notice
The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information
contained herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained
herein. TriQuint assumes no responsibility or liability whatsoever for the use of the information contained herein. The
information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with
such information is entirely with the user. All information contained herein is subject to change without notice.
Customers should obtain and verify the latest relevant information before placing orders for TriQuint products. The
information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any
patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or
anything described by such information.

TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or life-
sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal
injury or death.

DRAFT
Datasheet: Rev K 10-26-2017
© 2014 TriQuint
- 8 of 8 -
DRAFT
Disclaimer: Subject to change without notice
www.triquint.com
Not for New Designs