Technical Paper Handbook

Certified Cost Professional (CCP)

1265 Suncrest Towne Centre Drive | Morgantown, WV 26505

[email protected] | 1-304-296-8444, ext. 1110 |web.aacei.org
 Contents

The Purpose of this Handbook ............................................................................... 3

What is a Certified Cost Professional? ................................................................... 4
The Purpose of the CCP Technical Paper ................................................................ 5
The Topic of the CCP Technical Paper .................................................................... 6
Tips on Writing the Technical Paper....................................................................... 7
The Technical Paper and Plagiarism ..................................................................... 10
CCP Technical Paper Template ............................................................................. 11
Submitting the Technical Paper ........................................................................... 13
Technical Paper Pass/Fail Scenarios ..................................................................... 14
FAQs .................................................................................................................... 16
Resources ............................................................................................................ 17

Page 2 of 17
 The Purpose of this Handbook

This handbook is provided to assist candidates in preparing and submitting the

technical paper requirement for the Certified Cost Professional (CCP) Certification
exam.

The handbook was compiled by the AACE International Certification Headquarters

Staff solely as a guide and should not be used as a guarantee for passing the
technical paper.

Page 3 of 17
 What is a Certified Cost Professional?

A CCP is an experienced practitioner with advanced knowledge and technical

expertise to apply and communicate the broad principles and best practices of
Total Cost Management (TCM) in the planning, execution and management of any
organizational project or program.

The Certified Cost Professional (CCP) certification was established in 1976 and is
independently accredited by the Council of Engineering & Scientific Specialty
Boards (CESB) since 2000.

Page 4 of 17
 The Purpose of the CCP Technical Paper

The purpose of the CCP technical paper is to evaluate the candidate’s ability to
communicate ideas, statements and recommendations, or solutions in a logical
and reasonable manner. The technical paper is used as a gauge to measure the
candidate’s professional knowledge and how well they can articulate it.

It is not intended that the candidate write a thesis-quality paper or a paper

describing some unique and innovative approach to a work-related situation;
however, the technical paper should be well-organized, coherent, and exemplify
professional-level knowledge.

The technical paper is considered part of the CCP exam. Both the paper and the
multiple-choice portions of the exam must be passed in order to receive
certification.

Page 5 of 17
 The Topic of the CCP Technical Paper

The topic of the technical paper must pertain to some aspect of Cost
Engineering/Total Cost Management. Topics can include, but are not limited to,
quantity surveying, planning and scheduling, estimating, cost controls, project
management, claims consulting, engineering, etc. The specific topic is at the
discretion of the candidate. Certification Headquarters Staff and Certification
Board Members do not provide topic suggestions or dictate or approve specific
topic categories.

A common thought is that the technical paper must represent a complex project,
innovation, or research. However, history has shown that candidates tend to
write a successful technical paper when selecting a topic in which they have a
great deal of expertise or experience. This can range from successful use of a
software program for document control to designing a life saving device.

While AACE does not offer examples of technical papers written specifically for
the CCP exam, there is a vast collection of technical papers that have been either
published or presented, available to review in the Virtual Library. Candidates must
be a member to gain access to the library.

Page 6 of 17
 Tips on Writing the Technical Paper

As mentioned in the previous section, most candidates write successful technical

papers when they write about a topic in which they have a great deal of expertise
or experience.

It is helpful for candidates to ask themselves: “Do I have a specialty?” “Have I

worked on a project?” “Have I given a presentation?”

It is always important to pick a target audience and write the paper to

consistently meet that experience level. For example, if writing to those who are
experts in the field, do not regurgitate basic concepts; even those who are new to
the industry may already know the basics.

Technical paper graders must remain unbiased when evaluating technical papers.
Therefore, candidates should not use their name or any other identifying
information on the technical paper (this includes acknowledgements). The only
identifying item to be used is the candidate’s AACE ID number.

The purpose of the abstract is to “draw in” the reader – make the audience want
to read the paper. Abstracts shouldn’t be too lengthy, but should be interesting.
Keep in mind, an abstract is different from the introduction or problem
statement. If a candidate were to decide to submit the paper for publication at a
later time, the abstract is usually what is submitted. Make it good!

Page 7 of 17
While it is not mandatory to include figures, tables, or equations in the technical
paper, if any of those can enhance the reader’s understanding of the subject, it is
recommended to include them. Just make sure to cite the source if borrowing
from someplace or someone else.

When composing the body of the paper, candidates should think about what
point they are trying to make. Start by asking: “What am I trying to tell people, or
make them understand?” or “What makes my work different from everyone
else’s?” or “What is the resolution?”

Sometimes it helps to start with the resolution or conclusion to focus on what was
learned.

There should always be a conclusion to wrap up the paper – anything that was
promised in the abstract and identified in the introduction or problem statement.

One of the most important things to remember is this: Work MUST be cited
properly with references and a bibliography. References are any sources where
specific words, phrases, or sentences were used. The bibliography contains any
material used to prepare the paper, whether cited or not, including background
reading material. If there is confidential or proprietary information included in the
paper, permission must be received from the company prior to submission.
Candidates are required to review and adhere to the statements of the Technical
Paper Affidavit before completing registration.

Page 8 of 17
Candidates are evaluated on their ability to communicate. Therefore, using
complete sentences, proper grammar, and spelling is of great importance. It is
imperative to make sure sentences, paragraphs, and ideas transition well. This
helps convey the idea in a clear and concise manner and is essential for good
communication. Not only is it difficult to understand a paper if there are
grammatical errors, misspellings, and poor sentence structure, it is
unprofessional. When finished writing the paper, asking a colleague to proofread
has proven helpful. This is especially helpful for candidates where English isn’t
their native language.

Technical papers are valid for three years from the date written. If candidates use
a previously presented or published paper, it must have been presented or
published within three years of exam registration. In cases where a candidate
passes the paper but fails the exam, the passed paper is still valid for three years
from the date written.

For more hints about writing a technical paper, click here to read How to Write a
Technical Paper by James D. Whiteside, II PE.

Page 9 of 17
 The Technical Paper and Plagiarism

Having a strong anti-plagiarism policy is important for professional certification

organizations and congruent with credentialing industry best practices. AACE has
contracted with CheckForPlagiarism.net to provide plagiarism check services for
all technical papers of the association.

Becoming a Certified Cost Professional (CCP) carries a high degree of distinction

and respect in the industry. Therefore, it demands all candidates to conduct
themselves in a manner worthy of the title. Plagiarism has no place in the AACE
International Certification Program, and will not be tolerated.

Plagiarism is considered unethical behavior and there are serious penalties

applied if found in a technical paper. Click here to read the full Plagiarism Policy
and penalties.

Candidates may opt to check their technical paper before submitting it.
Click here to use our recommended plagiarism software for a minimal fee.

Page 10 of 17
 CCP Technical Paper Template

The CCP Technical Paper Template should be used as a formatting, layout, and
pagination guide in preparing an original 2,500-minimum word paper. While this
template may be useful in ensuring the technical paper will incorporate all
structural areas to be evaluated by technical paper graders, candidates are
responsible for demonstrating professional content, clarity, and relevance
through topic selection and writing skills, which are also evaluated by the graders.

The suggested technical paper outline includes the following:

• Title Page
• Table of Contents
• List of Tables
• List of Formulas
• List of Equations
• Abstract
• Introduction
• The Problem or Introduction Statement
• Paper content
• Conclusion
• Bibliography and/or References

The technical paper does not necessarily have to have formulas, equations, or
tables; however, if it can enhance the presentation of an idea to the audience,
including one or all of them is beneficial. If inserting a table, formula, graph, etc.

Page 11 of 17
that was created by someone else, it will need to be properly cited and
referenced.

To review and download the template, click here.

Please note: The minimum word count for the technical paper specifically written
for the Certified Cost Professional (CCP) exam is 2,500. If submitting a
presentation, publication, thesis or dissertation used within the last three years, it
must not exceed 5,000 words and must be reformatted to the specifications of
the AACE certification program.

Page 12 of 17
 Submitting the Technical Paper

Once received, AACE has up to 45 days to process and submit a technical paper
for evaluation. Grading cycles are on or around the 15th of each month;
candidates should plan registration accordingly and allow plenty of processing
time for headquarters.

Once papers have been graded, candidates will receive clearance to sit for the
exam via email, including instructions on how to schedule the exam. Candidates
have up to six months to schedule and take the exam from the original clearance
date.

Please note: Candidates will have up to three attempts (two at a reduced fee) to
take the exam within the six-month registration period. We recommend
scheduling the exam as soon as possible after receiving clearance in order to take
advantage of the reduced-fee resits, if necessary.

Page 13 of 17
 Technical Paper Pass/Fail Scenarios

A successful candidate has to pass the technical paper as well as the exam itself to
receive the CCP designation. Since the result of the technical paper is not
provided until the result of the multiple-choice portion of the exam is received,
there are a number of scenarios that can happen.
1. Pass the technical paper and pass the exam: Candidate passes and receives
the CCP designation.
2. Pass the technical paper and fail the exam: Take the exam again. The
passing technical paper will be valid for three years from the date written.
3. Fail the technical paper and pass the exam: Candidate is provided grader
feedback on ways to improve the paper and is given 30 days in which to
revise and resubmit the paper.
a. If the candidate passes the revision, s/he will receive the CCP
designation.
b. If the candidate fails the revision, s/he will be required to take the
exam again as well as submit a revised or new technical paper. Note:
If this happens close to the end of the six-month registration period,
it may be possible there will not be enough time left to have the
paper evaluated, to be cleared for the exam, and to schedule and sit
for the exam. In this circumstance, any payment made for the resit
fee will be applied to a new registration period.
4. Fail the technical paper and fail the exam: Candidate fails and must take the
exam again and submit a revised/new technical paper. Note: If this happens
close to the end of the six-month registration period, it may be possible

Page 14 of 17
there will not be enough time left to have the paper evaluated, to be
cleared for the exam, and to schedule and sit for the exam. In this
circumstance, any payment made for the resit fee will be applied to a new
registration period.

Page 15 of 17
 FAQs

Question Answer
How long does my Your paper must be at least 2,500 words and
paper have to be? shouldn’t be more than 5,000.

Our grading cycles run on or around the 15th of

When is the best time
each month. If you register a week or so prior to
to register and submit
the 15th, your paper should be able to be
my technical paper?
included in the following grading cycle.

May I use my thesis or You may, but the paper must not be more than
dissertation for my 5,000 words and must be formatted to fit the
submission? Technical Paper Template.
Your topic can be on anything as long as it
pertains to Cost Engineering/Total Cost
What should the topic Management. Still need help? Members can
of my paper be? view hundreds of papers that have been
published or presented in AACE’s publications or
meetings in the Virtual Library.
All professional-level and expertise-level
certifications have a written component of the
Why does the CCP
exam that tests the candidate’s ability to
have a technical paper
communicate professional knowledge. The
requirement?
CCP’s written component is in the form of the
technical paper.

Your technical paper must be current and

written within the last three years. If your paper
How long is my paper
passed but you are retaking the exam, your
valid?
passed paper is valid for three years from the
date written.

Page 16 of 17
 Resources

How to Write a Technical Paper – James Whiteside, AACE International

How to Present a Technical Paper – James Whiteside, AACE International

The Purdue Online Writing Lab (OWL) (for non-Purdue students)

How to Navigate the New OWL
Professional, Technical Writing
Reports, Proposals, and Technical Papers
Writing Report Abstracts
Research & Citation Resources

How to Write a Technical Paper – Georgios Varsamopoulos, Department of

Computer Science and Engineering, Arizona State University

Page 17 of 17