AMBERLITE™ HPR1100 Na Ion Exchange Resin: Product Data Sheet

Product Data Sheet
AMBERLITE™ HPR1100 Na Ion Exchange Resin

Uniform Particle Size, Gel, Strong Acid Cation Exchange Resin for Industrial Softening
Applications
Description AMBERLITE™ HPR1100 Na Ion Exchange Resin is a high-

quality resin for use in industrial softening applications when high
performance and cost-effective operation is required. The
chemical properties and particle size of the resin have been
optimized to help yield excellent operating capacity and rinse
characteristics, while reducing chemical regenerant and rinse
water usage.
Applications l Industrial softening
System Designs l Co-current

l Counter-current / Hold-down
l Packed beds
Historical AMBERLITE™ HPR1100 Na Ion Exchange Resin has previously been sold as DOWEX
Reference MARATHON™ C Na Ion Exchange Resin.
Typical Properties
Physical Properties
Copolymer Styrene-divinylbenzene
Matrix Gel
Type Strong acid cation
Functional Group Sulfonic acid
Physical Form Amber, translucent, spherical beads
Chemical Properties
Ionic Form as Shipped Na+
Total Exchange Capacity ≥ 2.0 eq/L (Na+ form)
Water Retention Capacity 42.0 – 48.0% (Na+ form)
Particle Size §
Particle Diameter 585 ± 50 µm
Uniformity Coefficient ≤ 1.10
< 300 µm ≤ 0.5%
> 850 µm ≤ 5.0%
Stability
Whole Uncracked Beads ≥ 95%
Swelling Ca2+ → Na+ : 5%
Na+ → H+ : 8%
Density
Particle Density 1.29 g/mL
Shipping Weight 850 g/L
§
For additional particle size information, please refer to the Particle Size Distribution Cross Reference Chart
(Form No. 177-01775).
Page 1 of 3 Form No. 177-03776, Rev. 2

June 2019
Suggested Temperature Range (Na+ form) 5 – 150°C (41 – 302°F)
pH Range
Operating
Service Cycle 1 – 14
Conditions
Stable 0 – 14
For additional information regarding recommended minimum bed depth, operating

conditions, and regeneration conditions for separate beds (Form No. 177-03729) in water
treatment, please refer to our Tech Fact.
Hydraulic Estimated bed expansion of AMBERLITE™ HPR1100 Na Ion Exchange Resin as a

Characteristics function of backwash flowrate and temperature is shown in Figure 1.
Estimated pressure drop for AMBERLITE™ HPR1100 Na as a function of service

flowrate and temperature is shown in Figure 2. These pressure drop expectations are
valid at the start of the service run with clean water.
Figure 1: Backwash Expansion Figure 2: Pressure Drop

Temperature = 10 – 60°C (50 – 140°F) Temperature = 10 – 60°C (50 – 140°F)
Product DuPont has a fundamental concern for all who make, distribute, and use its products, and
Stewardship for the environment in which we live. This concern is the basis for our product stewardship
philosophy by which we assess the safety, health, and environmental information on our
products and then take appropriate steps to protect employee and public health and our
environment. The success of our product stewardship program rests with each and every
individual involved with DuPont products— from the initial concept and research, to
manufacture, use, sale, disposal, and recycle of each product.

June 2019
Customer Notice DuPont strongly encourages its customers to review both their manufacturing processes
and their applications of DuPont products from the standpoint of human health and
environmental quality to ensure that DuPont products are not used in ways for which they
are not intended or tested. DuPont personnel are available to answer your questions and to
provide reasonable technical support. DuPont product literature, including safety data
sheets, should be consulted prior to use of DuPont products. Current safety data sheets are
available from DuPont.
Please be aware of the following:

l WARNING: Oxidizing agents such as nitric acid attack organic ion exchange resins
under certain conditions. This could lead to anything from slight resin degradation to a
violent exothermic reaction (explosion). Before using strong oxidizing agents, consult
sources knowledgeable in handling such materials.
Have a question? Contact us at: All information set forth herein is for informational purposes only. This information is general information and may differ from that based
on actual conditions. Customer is responsible for determining whether products and the information in this document are appropriate for
www.dupont.com/water/contact-us
Customer's use and for ensuring that Customer's workplace and disposal practices are in compliance with applicable laws and other
government enactments. The product shown in this literature may not be available for sale and/or available in all geographies where
DuPont is represented. The claims made may not have been approved for use in all countries. Please note that physical properties may
vary depending on certain conditions and while operating conditions stated in this document are intended to lengthen product lifespan
and/or improve product performance, it will ultimately depend on actual circumstances and is in no event a guarantee of achieving any
specific results. DuPont assumes no obligation or liability for the information in this document. References to “DuPont” or the “Company”
mean the DuPont legal entity selling the products to Customer unless otherwise expressly noted. NO WARRANTIES ARE GIVEN; ALL
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED. No
freedom from infringement of any patent or trademark owned by DuPont or others is to be inferred.
DuPont™, the DuPont Oval Logo, and all products, unless otherwise noted, denoted with a ™, ℠ or ® are trademarks, service marks or
registered trademarks of affiliates of DuPont de Nemours Inc. Copyright © 2019 DuPont de Nemours Inc. All rights reserved.
DOWEX MARATHON™ is a trademark of The Dow Chemical Company used under license by DuPont.

June 2019

AMBERLITE™ HPR1100 Na Ion Exchange Resin: Product Data Sheet

Uploaded by

Copyright:

Available Formats

AMBERLITE™ HPR1100 Na Ion Exchange Resin: Product Data Sheet

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

AMBERLITE™ HPR1100 Na Ion Exchange Resin: Product Data Sheet

Uploaded by

Copyright:

Available Formats

Product Data Sheet

AMBERLITE™ HPR1100 Na Ion Exchange Resin

Description AMBERLITE™ HPR1100 Na Ion Exchange Resin is a high-

Applications l Industrial softening

System Designs l Co-current

Page 1 of 3 Form No. 177-03776, Rev. 2

For additional information regarding recommended minimum bed depth, operating

Hydraulic Estimated bed expansion of AMBERLITE™ HPR1100 Na Ion Exchange Resin as a

Estimated pressure drop for AMBERLITE™ HPR1100 Na as a function of service

Figure 1: Backwash Expansion Figure 2: Pressure Drop

Page 2 of 3 Form No. 177-03776, Rev. 2

Please be aware of the following:

Page 3 of 3 Form No. 177-03776, Rev. 2

You might also like