Slickline Pressure Control

Equipment String
Elmar design and manufacture pressure control equipment and accessories for slickline and braided cable operations.
NOV Elmar Pressure Control Equipment Strings are fully traceable and certified by independent authorities.

TYPICAL PRESSURE CONTROL

EQUIPMENT STRING RIG-UP
Item Description
1 Hydraulic Tool Catcher 1 3/16” fish neck
2 Hydraulic Stuffing Box with 16” dia wheel 0.108” wire/0.125 wire
3 Liquid Seal Slickline Control Head Upper SGI Assy 15,000 psi
Slickline Stuffing Box
3.1 Liquid Seal Slickline Control Head Lower SGI Assy 10,000 psi**
Seals around moving cable.
4 Chemical Injection Sub 0.125” wire
5 Lightweight Lubricator Section with threaded quick unions, 4ft long
6 Lightweight Lubricator Section with threaded quick unions, 5ft long
7 Lightweight Lubricator Section with threaded quick unions, 6ft long
Chemical Injection Sub
8 Lightweight Lubricator Section with threaded quick unions, 8ft long
The Elmar Chemical Injection Sub
9 Lightweight Lubricator Section with threaded quick unions, 10ft long
is designed to apply a de-icing
10 Lubricator Section with ported lower connection (various lengths available on request)

Section 3 - WPCE Wireline Pressure Control

agent or corrosion inhibitor to the
slickline during well service 11 3” Lubricator Section with integral quick unions (various lengths available on request)
operations. 12 Lubricator Lifting Clamp, Spreader and wire rope slings (Sling length to be specified)
12.1 Lubricator Dolly with 4 3/4” -4x2thd quick union
13 Bleed-Off Sub
Lubricator Sections
Elmar Lubricators are used to 14 Quick Test Sub
insert and retrieve a tool string 14.1 Hand Pump Assembly for Quick Test Sub
on a well under pressure. 14.2 Hose Assembly 1/4” x 25ft long with quick connections 10,000 PSI W/P
15 Triple Hydraulic Compact BOP with manifold block
16 Galvanised Triple BOP Cage
17 Dual Hydraulic Compact BOP wire with manifold block
18 Galvanised Dual BOP Cage
19 Single Hydraulic Compact BOP wire with manifold block
20 Galvanised Single BOP Cage
21 Lightweight BOP with manifold block; available in Single, Dual and Triple configurations 175
Lubricator Sections 22 Stainless Steel Crash Frame for “Lightweight” BOP configurations
23 0-10,000 PSI BOP Manifold Gauge
24 Pump-In Sub with (1) 2”-1502 side outlet
24.1 Wellhead Adapter Flange 3 1/16” 10,000LB 6BX BX-154
25 Mainframe
26 Hydraulic Actuator LW/SB/TC/3-BOP *
27 Lifting Bail
28 Test Cap
29 Test Plug and Collar
Ported Lubricator Section 30 Safety Flow Diverter Valve and wire clamp
Elmar Ported Lubricators are used 31 Male Thread Protector (spare)
to insert and retreive a tool string 32 Female Thread Protector (spare)
on a well under pressure and
33 Line Wiper, Stuffing Box or Tool Catcher Hand Pump *
allow bleed off through a bleed off
manifold. 34 Hydraulic Hose 1/4” x 100ft long with quick couplings *
35 BOP Hand Pump *
36 Hydraulic Hose 1/4” x 50ft long with quick couplings *
37 “Y” Hose, BOP Open *
38 “Y” Hose. BOP Close *
Quick Test Sub Wireline Valve
The Elmar Quick Test Sub (QTS) The Elmar Lightweight Wireline
is designed to save substantial Valve gives positive protection
rig time while pressure testing the during well service operations,
Slickline Pressure Control Equipment when operating with slickline,
String in multiple run operations. braided wireline and electric line.
Multiline ram seals allow the use
of the same seal configuration for
electric line and slickline.
Wellhead Adapter Flange
The Elmar Wellhead Adapter
Flange provides a
means of connecting
in a safe manner the Slickline
Pressure Control Equipment String to
the wellhead.

Note: For corresponding diagram see next page. Additional equipment available on request.

Elmar Product Line

© 2014 National Oilwell Varco www.nov.com/Elmar
 Typical Slickline Pressure Control
Equipment String Rig-up
A full range of slickline pressure control equipment is available, including well head adapters, wireline valves, lubricators,
stuffing boxes and other accessories.

Specifications vary from the basic 2 1/2” ID

5,000 psi WP string with a manual wireline valve,
through to 15,000 psi WP strings with triple and
quad hydraulically operated wireline valves, up to 9”
through bore.

204 Item number from table on previous page

167 33
3.1 Data sheet page number

34 2 202 3 Please refer to table on previous page.

*Not required when Control Module is purchased.
Section 3 - WPCE Wireline Pressure Control

**Working pressure as per quick union connection.

Equipment supplied with thread protectors. Wire size to
194
be specified when ordering - where appropriate.

1 4

25
190

176 26 130
5 - 9

12 190 192 189

10 11 13

16
12.1

18 20 22

181 187 14.1 167

32 27 24 14 14.2 30 206 29

167

35

36
21 182
37 19 183
17 183
15 183 23 182

38
31 28
24.1 180

Elmar Product Line

© 2014 National Oilwell Varco www.nov.com/Elmar