Optcl

ODISHA POWER TRANSMISSION CORPORATION LTD
OFFICE OFTHE CHIEF GENERAL MANAGER,

CENTRAL PROCUREMENT CELL,
JANPATH, BHUBANESWAR - 751022
TENDER SPECIFICATION
NO. Sr.GM.-CPC –TENDER- ISO- 35/2018-19
FOR
PROCUREMENT OF
Cost of
Tota Est. Last date of
L Tender
Sl. ITEM 2018- 2019- Total Cost EMD in receipt &
o Spec.
No. DESCRIPTION 19 20 (in Rs.) Rupees opening of
t. document
in lakhs tender
(in Rs.)
400 KV HCB -
6 73.00 73,000/-
I i with Double 3 3
E/S,2000A
132KV SI W/O 6 20.21
i 0 6
E/S,2000A.
132 KV Double
7 45.37
ii Isolator 0 7
with E/S,2000A.
Motor operating
mechanism box
for 132 KV
II 1,88,950/-
Isolator with
aluminium
enclosure,10 NO 200 123.37
iii 100 100
+ 10 NC auxiliary
contact with three
phase AC motor
with retrofitting
as per OPTCL 10,000+ 04/12/2018
specification. UP TO 01 PM
GST 12%-
33KV SI W/O 11 14.86
i 5 6 1200/- &
E/S,2000A
=11,200/-
33 KV Double 04/12/2018
5 11.29
ii Isolator 0 5
AT 03-00 PM
W/O E/S,2000A
33 kV Beam
12 19.35
iii Mounted 6 6
isolator, 2000A
II Motor operating
1,85,555/-
I mechanism box
for 33 KV Isolator
with aluminium
enclosure,10 NO
iv + 10 NC auxiliary 150 150 300 185.05
contact with three
phase AC motor
with retrofitting
as per OPTCL
specification.
I 420 KV, 63 KA 10 98,500/-
i 10 0 98,50,05
V 3.0 Sec,3150A,
Page 1 of 76
Tripple pole HCB 0.00
Isolator with 1
motor operated
E/S, along with
support
insulators (CD
1302mm)
Terminal
connector for 420
KV Isolator to 54
ii 54 0
receive quad
moose ACSR
conductor.
Terminal
connector for 420
KV Isolator to 6
iii 6 0
receive 4.5" Al
tube.
SALE OF TENDER PAPER FROM 01/11/2018 AT 10 AM TO 04/12/2018 UPTO 12-30 PM.
LAST DATE OF SUBMISSION OF TENDER PAPER- 04/12/2018 UP TO 01 PM.
DATE OF OPENING OF TENDER PAPER- 04/12/2018 AT 03-00 PM.
Page 2 of 76
ODISHA POWER TRANSMISSION CORPORATION LTD.
REGD. OFFICE: JANPATH, BHUBANESWAR – 751 022,
ODISHA
e-TENDER NOTICE NO. CPC-35 / 2018-19
For and on behalf of ODISHA POWER TRANSMISSION CORPORATION LTD, C.G.M.
[C.P.C.] invites Tenders from reputed manufacturers in two part bidding system for supply of
Isolators. The interested bidders would be required to enroll themselves on the tender portal
www.tenderwizard.com/OPTCL .Complete set of bidding documents are available at
www.tenderwizard.com/OPTCL from 01/11/2018 AT 11 AM TO 04/12/2018 UPTO 12-30 PM
Interested manufacturers may visit OPTCL’s official web site http://www.optcl.co.in and
www.tenderwizard.com/OPTCL for detail specification.
CHIEF GENERAL MANAGER [C.P.C.]
Page 3 of 76
NOTICE INVITING TENDER
ODISHA POWER TRANSMISSION CORPORATION LTD.,
REGD. OFFICE: JANPATH, Bhubaneswar.
e-TENDER NOTICE NO- CPC- 35 /2018-19.
For and on behalf of the ODISHA POWER TRANSMISSION CORPORATION LTD., the
undersigned invites bids under two-part bidding system in e- tendering mode only as per the
following details.
Cost of
Tota Est. Last date of
L Tender
Sl. ITEM 2018- 2019- Total Cost EMD in receipt &
o Spec.
No. DESCRIPTION 19 20 (in Rs.) Rupees opening of
t. document
in lakhs tender
(in Rs.)
400 KV HCB -
I i with Double 3 3 6 73.00 73,000/-
E/S,2000A
132KV SI W/O 6 20.21
i 0 6
E/S,2000A.
132 KV Double
7 45.37
ii Isolator 0 7
with E/S,2000A.
Motor operating
mechanism box
for 132 KV
II 1,88,950/-
Isolator with
aluminium
iii 100 100
+ 10 NC auxiliary
contact with three
phase AC motor
with retrofitting
as per OPTCL
10,000+ 04/12/2018
specification.
33KV SI W/O 11 14.86 UP TO 01 PM
i 5 6 GST 12%-
E/S,2000A
1200/- &
33 KV Double
5 11.29 =11,200/-
ii Isolator 0 5 04/12/2018
W/O E/S,2000A
AT 03-00 PM
33 kV Beam
iii Mounted 6 6 12 19.35
isolator, 2000A
Motor operating
II 1,85,555/-
mechanism box
I
for 33 KV Isolator
with aluminium
enclosure,10 NO
iv + 10 NC auxiliary 150 150 300 185.05
contact with three
phase AC motor
with retrofitting
as per OPTCL
specification.
420 KV, 63 KA
I 3.0 Sec,3150A, 98,50,05
i 10 0 10 98,500/-
V Tripple pole HCB 0.00
Isolator with 1
Page 4 of 76
motor operated
E/S, along with
support
insulators (CD
1302mm)
Terminal
connector for 420
KV Isolator to 54
ii 54 0
receive quad
moose ACSR
conductor.
Terminal
connector for 420
iii KV Isolator to 6 0 6
receive 4.5" Al
tube.
The bidders can view the tender documents from website free of cost.
TENDER COST:
The bidders who want to submit bids shall have to pay non-refundable amount Rs. 11,200/- (Rupees Eleven
thousand two hundred) only including GST @ 12%) towards the tender cost, in the form of Demand
draft/Pay order/Cash only, drawn in favour of the D.D.O Head Qrs, OPTCL, Bhubaneswar. They have to
also submit notarized hard copy of GST registration certificate on or before the date & time of submission of
techno-commercial bid.
TENDER PROCESSING FEE:
The bidders shall have to submit non-refundable amount of Rs.5,900/- (Rupees Five thousand & nine
hundred) only including GST @ 18%) towards the tender processing fee to K.S.E.D.C.Ltd, in e-payment
mode. The e-payment of above amount is to be made to enable the bidder to down load the bid proposal
sheets & bid document in electronic mode.
SUBMISSION OF TENDER COST, TENDER PROCESSING FEE & EMD:
The bidder shall deposit the tender cost, tender processing fee & EMD BG prior to last date & time for
submission of bid as notified in tender notice. Local micro & small enterprisers (MSEs) (In the state of
Odisha) based in Odisha and registered with respective DICs, Khadi, Village, Cottage & Handicrafts
Industries, OSIC and NSIC can participate without payment of the cost of tender specification. They have to
submit notarized hard copy of valid registration as local MSE (In the state of Odisha) as above on or before
the date & time of submission of techno-commercial bid.
The demand draft/pay order for tender cost , processing fees are to be submitted along with the EMD
at the office of the undersigned on or before the last date & time of submission of tender.
The bidders shall scan the Demand Draft/Pay order/ Bank guarantee, towards EMD/ notarised hard copy of
valid registration as local MSE (In the state of Odisha) (if any) and upload the same in the prescribed form
in .gif or .jpg format in addition to sending the original as stated above.
The prospective bidders are advised to register their user ID, Password, company ID from website
www.tenderwizard.com/OPTCL by clicking on hyper link “Register Me”.
Page 5 of 76
Any clarifications regarding the scope of work and technical features of the tender can be had from the
undersigned during office hours.
Minimum qualification criteria of bidders: AS STIPULATED IN SECTION-II, (G.T.C.C) OF THE
TENDER SPECIFICATION.
CHIEF GENERAL MANAGER, CPC
ODISHA POWER TRANSMISSION CORPORATION LTD.

OFFICE OF THE SR. GENERAL MANAGER
CENTRAL PROCUREMENT CELL
FAX NO.:0674 – 2542964
TELEPHONE NO.:0674 – 2541801
JANAPATH, BHUBANESWAR – 751022
TENDER SPECIFICATION NO.Sr.G.M.-CPC –TENDER-C.B-25 / 2018-19
CONTAINING
PART – I
SECTION – I : INSTRUCTION TO TENDERERS
SECTION – II :GENERAL TERMS AND CONDITIONS OF

CONTRACT ( G.T.C.C.) (COMMERCIAL)
SECTION – III : LIST OF ANNEXURES (COMMERCIAL)
Page 6 of 76
SECTION – IV : TECHNICAL SPECIFICATION
PART – II PRICE BID.
Page 7 of 76
PART – I.
SECTION – I.
INSTRUCTIONS TO TENDERERS
Clause. Title. Page.
1. Submission of Bids. 02
2. Division of Specification. 02
3. Tenders shall be in two parts.
4. Opening of Bids . 03
5. Purchaser’s right regarding alteration in 04
Quantities, Tendered.
6. Procedure and opening time of tenders. 04
7. Bidder’s liberty to deviate from specification.
8. Eligibility for submission of bids. 04
9. Purchaser’s right to accept/reject bids. 10
10. Mode of submission of tenders. 10
11. Earnest money deposit. 10
12. Validity of the bids. 11
13. Price. 11
14. Revision of Tender Price by Bidders. 11
15. Tenderers to be fully conversant with 11
the clauses of the Specification.
16. Documents to accompany Bids. 11
17. Documents/Papers to Accompany PART – II Bid. 12
18. Conditional Offer. 12
19. General. 12
Page 8 of 76
COMMERCIAL SPECIFICATION.
SECTION-I
INSTRUCTIONS TO TENDERER
1. 1. Submission of Bids: -
The bidder shall submit the bid in Electronic Mode only i.e. www.tenderwizard.com/OPTCL. The
bidder must ensure that the bids are received in the specified website of the OPTCL by the date and time
indicated in the Tender notice. Bids submitted by telex/telegram will not be accepted. No request from any
bidder to the OPTCL to collect the Bids in physical form will be entertained by the OPTCL.
The OPTCL reserves the right to reject any bid, which is not deposited according to the instruction,
stipulated above. The participants to the tender should be registered under GST laws.
1. For all the users it is mandatory to procure the Digital Signatures.
2. Contractors / Vendors / Bidders / Suppliers are requested to follow the below steps for
Registration:
a. Click “Register”, fill the online registration form.
b. Pay the amount of Rs. 2360/- through DD in Favour of KSEDCL Payable at Bangalore.
c. Send the acknowledgment copy for verification.
d. As soon as the verification is being done the e-tender user id will be enabled.
3. After viewing Tender Notification, if bidder intends to participate in tender, he has to use
his e-tendering User Id and Password which has been received after registration and
acquisition of DSCs.
4. If any Bidder wants to participate in the tender he will have to follow the instructions
given below:
a. Insert the PKI (which consist of your Digital Signature Certificate) in your
System. (Note: Make sure that necessary software of PKI be installed in your system).
b. Click / Double Click to open the Microsoft Internet Explorer (This icon will
be located on the Desktop of the computer).
c. Go to Start > Programs > Internet Explorer.
d. Type www.tenderwizard.com/OPTCL in the address bar, to access the Login
Screen.
e. Enter e-tender User Id and Password, click on “Go”.
f. Click on “Click here to login” for selecting the Digital Signature Certificate.
g. Select the Certificate and enter DSC Password.
h. Re-enter the e-Procurement User Id Password
Page 9 of 76
5. To make a request for Tender Document Bidders will have to follow below mentioned
steps.
· Click “Un Applied” to view / apply for new tenders.
· Click on Request icon for online request.
6. After making the request Bidders will receive the Tender Documents which can be
checked and downloaded by following the below steps:
· Click to view the tender documents which are received by the user.
· Tender document screen appears.
· Click “Click here to download” to download the documents.
7. After completing all the formalities Bidders will have to submit the tender and they must
take care of following instructions.
· Prior to submission, verify whether all the required documents have been attached
and uploaded to the particular tender or not.
· Note down / take a print of bid control number once it displayed on the screen
8. Tender Opening event can be viewed online.
9. Competitors bid sheets are available in the website for all.
10. For any e-tendering assistant contact help desk number mentioned below.Bangalore
– 080- 40482000.
The participants to the tender should be registered under GST laws.
2. Division of Specification.
The specification is mainly divided into two parts viz. Part-I & Part-II.
Part-1 Consists of
[i] Section-I Instruction to Tenderers.

[ii] Section-II General Terms & conditions of contract.
[iii] Section-III Schedules and forms etc.
[iv] Section-IV Technical Specification.
Part-II Consists of
Schedule of prices as per Annexure-V
3. Tenders shall be in two parts.
The Tenderers are required to submit the tenders in two parts viz. Part-I ( Techno commercial) & Part-II
(Price bid).
Page 10 of 76
4. Opening of Bids.
[a] The tender shall be opened on the date and time fixed by the OPTCL for opening of bids in
Electronic mode in presence of such of the Tenderers or their authorized representatives [limited to one
person only] on the due date of opening of tender who opt remain present. After scrutiny of the technical
particulars and other commercial terms, clarifications, if required, shall be sought for from the bidders.
The Tenderers shall be allowed 15 days time for such activity.
[b] On receipt of technical clarification, the bids shall be reviewed, evaluated and those not in
conformity with the technical Specification / qualifying experience, shall be rejected. If any of the
technical proposal requires modification to make them comparable, discussion will be held with the
participating bidders.
All the responsive bidders shall be given opportunity to submit the revised technical and
revised price proposals as a follow up to the clarification (modification if any) on the technical
proposals. The qualified bidders shall be given opportunity to submit revised price proposals within
15 days from the date of such discussion or within time frame mutually agreed, whichever is earlier.
[c] When the revised price proposals are received, the original price proposals will be returned to the
bidders unopened along with their original technical proposals. Only the revised technical and price
proposals will be considered for bid evaluation. The price bids [Part-II] of such of the Tenderers,
whose tenders have been found to be technically and commercially acceptable, including those
supplementary revised price bids, submitted subsequently, shall be opened in the presence of the
bidder’s representative on a date and time which will be intimated to all technically and
commercially acceptable Tenderers.
[d] The bidders are required to furnish sufficient information to the Purchaser to establish their
qualification, capacity to manufacture and/or supply the materials/perform the work. Such
information shall include details of bidder’s experience, its financial, managerial and technical
capabilities.
[e] The bidders are also required to furnish details of availability of appropriate technical staff and
capability to perform after sales services. The above information shall be considered during scrutiny
and evaluation of bids and any bid which does not satisfactorily meet these requirements, shall not be
considered for price bid evaluation.
[f] The price bids of the technically and otherwise acceptable bids shall only be evaluated as per the
norms applicable in terms of this Specification.
5. Purchaser’s Right Regarding Alteration of Quantities Tendered.
The Purchaser may alter the quantities of materials/equipment at the time of placing orders.
Initially the purchaser may place orders for lesser quantity with full freedom to place extension
orders for further quantity under similar terms and conditions of the original orders. Orders
Page 11 of 76
may also be split among more than one tenderer for any particular item, if considered
necessary in the interest of the Purchaser to get the goods/equipment earlier.
6. Procedure and opening time of tenders.
Tenders will be opened in the office of the Chief General Manager [C.P.C.] on the specified date and
time in presence of the Tenderers or their authorized representatives [limited to one person only] in case
of each bidder who may desire to be present, at the time of opening the bids.
7. Bidder’s Liberty to deviate from Specification.

The Tenderer may deviate from the specification while quoting, if in his opinion, such deviation is in
line with the manufacturer’s standard practice and conducive to a better and more economical offer. All
such deviations should however be clearly indicated giving full justifications for such deviation. [Read
with Clause-9, Section-II of the Specification].
8. Eligibility for submission of bids.

Only those manufacturers who have deposited the cost of tender specification are eligible to participate
in the tender. They should submit the money receipt as a proof of such payment. The local Micro and
small Enterprises(MSEs) (In the state of Odisha) registered with respective DICs, Khadi, Village,
Cottage & Handicrafts Industries, OSIC and NSIC can participate without payment of the cost of tender
specification
9. Purchaser’s right to accept/reject bids:
The purchaser reserves the right to reject any or all the tenders without assigning any reasons what so
ever if it is in the interest of OPTCL, under the existing circumstances. [Read with clause-10, Section-II
of the specification].
10. Mode of submission of Tenders.

[A] Tenders shall be submitted in electronic mode only. (www.tenderwizard.com/OPTCL)
[B] Telegraphic or FAX tenders shall not be accepted under any circumstances.
11. Earnest money deposit:
The tender shall be accompanied by Earnest Money deposit of value specified in the notice inviting
tenders against each lot / bid. Tenders without the required EMD as indicated at Annexure-VIII will
be rejected out rightly.
The local Micro and small Enterprises(MSEs) (In the state of Odisha)registered with
respective DICs, Khadi, Village, Cottage & Handicrafts Industries, OSIC and NSIC can participate
by submitting Earnest Money Deposit @ fifty percent of the amount indicated in the Notice Inviting
Tender.
The earnest money deposit shall be furnished in one of the following forms subject to the
conditions mentioned below:
Page 12 of 76
(a) Cash:- Payable to drawing & disbursing Officer, OPTCL (Hd.qrs. Office), Bhubaneswar - 751022
(b) Bank Draft: -To be drawn in favour of Drawing & Disbursing Officer, OPTCL [H.Qrs.Office],
Bhubaneswar-751 022.
(c) Bank Guarantee from any Nationalized/Scheduled Bank strictly as per enclosed proforma vide
Annexure-VI to be executed on non-judicial stamp paper worth Rs.29.00 or as applicable, as per
prevailing laws in force and also to be accompanied by the confirmation letter of the issuing Bank
Branch.
NOTE:
(i). The validity of the EMD in the form of Bank Guarantee shall be at least for 240 days from the date
of opening of tender failing which the tender will be liable for rejection.
(ii) No interest shall be paid on the Earnest Money Deposit.
(iii) E.M.D. in shape of cash may be submitted up to Rs. 25,000/- (Rupees Twenty-five) Thousand) only.
Above Rs. 25,000/- (Rupees Twenty-five thousand) the Earnest Money Deposit shall be furnished in
any one of the forms indicated above (i.e. Through Bank Draft, Bank Guarantee/ National Savings
Certificate).
(iv) No adjustment towards EMD shall be permitted against any outstanding amount with the ODISHA
POWER TRANSMISSION CORPORATION LTD.
(v) The chart showing particulars of EMD to be furnished by Tenderers of different categories is placed
at Annexure-VIII.
(vi) In the case of unsuccessful tenderer, the EMD will be refunded after the tender is decided. In the
case of successful Tenderer, this will be refunded only after furnishing of security money referred to
at clause-19 of Section-II.
(vii) Suits, if any, arising out of this clause shall be filed in a Court of law to which the jurisdiction of
High Court of ODISHA extends.
(vii) EMD will be forfeited if the tenderer fails to accept the letter of intent and/or purchase order issued
in his favour or to execute the order, placed on them.
(viii) Tenders not accompanied by Earnest Money shall be disqualified.
12. Validity of the Bids: -
The tenders should be kept valid for a period of 180 days from the date of opening of the tender,
failing which the tenders will be rejected.
13. PRICE: -
i) Tenderers are requested to quote-‘FIRM’ Price. No deviation from FIRM PRICE will be
entertained irrespective of deviation clause No.7 of this part of the specification.
14. Revision of tender price by Bidders: -
Page 13 of 76
[a] After opening of tenders and within the validity of period, no reduction or enhancement in price will
be entertained. If there is any change in price, the tender shall stand rejected and the EMD deposited
shall be forfeited.
[b] After opening of price bid if the validity period is not sufficient to place purchase order, the tenderer
may be asked by the purchaser to extend the validity period of the bid under the same terms and
condition as per the original tender.
However, the tender are free to change any or all conditions including price except delivery period of
their bids at their own risk, if they are asked by the purchaser to extend the validity period of the bid
prior to opening of price bid.
15. Tenderers to be fully conversant with the clauses of the Specification: -
Tenderers are expected to be fully conversant with the meaning of all the clauses of the specification
before submitting their tenders. In case of doubt regarding the meaning of any clause, the tenderer
may seek clarification in writing from the Chief General Manager (Central Procurement Cell)
OPTCL. This, however, does not entitle the Tenderer to ask for time beyond due date, fixed for
receipt of tender.
16. Documents to Accompany Bids.
Tenderers are required to submit tenders in the following manner:
The Tender shall Contain the following documents.
[i] Declaration Form. [As per Annexure-I]
[ii] Earnest Money. [As per Annexure-VIII]
[iii] Technical specification and Guaranteed Technical Particulars conforming to the Purchaser’s
Specification along with drawings, literatures and all other required Annexures, duly filled in.
[iv] Photostat copies of type test certificates of materials/equipments offered as stipulated in the
Technical Specification.
[v] Abstract of Terms & conditions in prescribed proforma as per Annexure-II.
[vi] General Terms & Conditions of supply offer as per Section-II of the Specification.
[vii] List of orders executed for similar materials/equipment’s during preceding 2 (two) years indicating
the customer’s name, Purchase Order No. & Date, date of supply and date of commissioning etc.
[viii] Data on past experience as per Clause-7 of Section-II of the Specification.
[ix] Sales tax clearance certificate for the previous year and GST Compliance Rating. The GST
Identification Number (GSTIN) under GST Laws and permanent account number [PAN] of the firm
under Income tax Act are required.
[x] Audited Balance sheet & profit loss accounts of the bidder, for past (3) three years.
[xi] Schedule of quantity and delivery in the prescribed Proforma vide Annexure, as appended.
[xii] List of Orders in hand to be executed.
Page 14 of 76
[xiii] Deviation schedule.
[xiv] The bidder should not have any pending litigation or arbitration with OPTCL with regard to any
project or related activity. The bidder should certify/declare the same in unequivocal terms by way of an
affidavit duly sworn before a magistrate/notary.
[xv] Notarized hard copy and soft copy of valid registration as local MSE( In the state of
Odisha)(if any).
17. Documents/Papers to accompany Part-II Bid.
(a) Part-II of the tender shall consist of the following
(i) Schedule of prices in the prescribed proforma
18. Conditional Offer:
Conditional offer shall not be accepted.
19. General: -
(i) In the event of discrepancy or arithmetical error in the schedule of price, the decision of the
purchaser shall be final and binding on the Tenderer.
(ii) For evaluation, the price mentioned in words shall be taken if there is any difference in figures and
words in the price bid.
(iii) Notice inviting tender shall form part of this specification.
(iv) The price bids of the technically and otherwise acceptable bids shall only be evaluated. The EMD of
others, if any, shall be returned to the bidders.
(v) Tenderer can offer any lot or all the lots of the tender, if there are more than one lots. But the tender
(bid) must be furnished separately for each lot.
(vi) It should be distinctly understood that the price bid shall contain only details/documents relating to
price, as outlined in clause-17 mentioned herein above. Inclusion of any of the
documents/information etc. shall render the bid liable for rejection.
(vii) The tenderer must submit the EMD amount, cost of tender document (Form Fee) and
Tender processing fee in a sealed cover envelope super-scribing the tender specification
number, Tender Notice No & Date of tender clearly on the cover envelope. The said
envelope is to be submitted in the office of the purchaser on or before the last date and
time of submission of Bids.
20.0 Expenses in respect of OPTCL’s representative for witnessing the inspection & testing of the
offered equipment/materials at the inspection and testing site.
The testing and inspection of the equipment/ materials at manufacturer works are in the scope of
work of the Contractor/Supplier.
OPTCL inspecting officer, on receipt of offer for inspection from the contractor/supplier, proceeds to
the manufacturer works to witness the Type/Acceptance/Routine test.
Important:
Page 15 of 76
It is hereby informed to all the bidders that the relevant clauses of the contract specification,
pertaining to inspection and testing of equipment/materials, are hereby supplemented with following
additional terms and conditions.
The expenses under the following heads, in respect of OPTCL’s representative for witnessing the
inspection & testing of the offered equipment/materials at the inspection and testing site, shall be
borne by the contractor / supplier.
a) Hotel Accommodation:
I. Single room accommodation in 4 star hotel for the OPTCL inspecting officer of the rank of Assistant
General Manager (Grade E-6) and above.
II. Single room accommodation in 3 star hotel for the OPTCL inspecting officer of the rank below
Assistant General Manager (Grade E-6).
N.B.: It is the responsibility of the contractor to arrange the hotel accommodation matching with their
inspection and testing schedule, so that the inspecting officer can check-in the hotel one day prior to
the date of inspection and check out after the completion of the inspection, subject to availability of
the return travel ticket. In case of extended duration of inspection or non-availability of the return
travel ticket, Contractor/supplier/manufacturer shall arrange for the extended stay of the inspecting
officer in the Hotel accordingly. In case there is no hotel with prescribed standard in and around the
place of inspection, the contractor/supplier/manufacturer shall suggest alternative suitable
arrangement at the time of offer for inspection, which is subjected to acceptability of OPTCL
inspecting officer.
b) Journey of the inspecting officer:
(i) To and fro travel expenditure from the Head Quarters of the inspecting officer to the place of
inspection/testing shall be borne by the contractor/supplier/manufacturer. Journey from the Head
Quarters of the inspecting officer to the nearest Air Port by train (Ist/IInd A.C) & A/C Taxi then by
Air to the place of inspection/testing or to the nearest place of inspection/testing and then by train
(Ist/IInd A.C) & A/C taxi to the place of inspection/testing shall be arranged by the
contractor/supplier/manufacturer.
(ii) For train journey, inspecting officer of the rank Assistant General Manager and above shall be
provided with 1st class AC ticket and inspecting officer below the rank of Assistant General
Manager shall be provided with 2nd class AC ticket.
(iii) The Air-ticket / train-ticket booking/cancellation is the responsibility of the contractor / supplier.
Page 16 of 76
(iv) Moreover, if during the journey there is an unavoidable necessity for intermediate travel by road/
waterway/sea-route, the contractor/supplier shall provide suitable conveyance to the inspecting
officer for travel this stretch of journey or bear the cost towards this. Any such possibilities shall be
duly intimated to OPTCL at the time of their offer for inspection.
c) Local Conveyance:
At the place of the inspection/testing, for local journey of the inspecting officer between Hotel and
inspection/testing site and or any other places, Air-conditioned four wheeler vehicle in good
condition shall be provided by the contractor/supplier/manufacturer.
d) Following points are also to be considered:
(i) All the above expenses shall be deemed to be included in the bidder’s quoted price for that supply
item. Bidder shall not be eligible to raise any extra claim in this regard.
(ii) Contractor/supplier/manufacturer may assume that only in 40% of the inspection and testing offer
cases, OPTCL inspecting officer, not below the rank of Assistant General Manager will witness the
inspection and testing.
(iii) In case of inspection and testing of some critical equipment/materials like Power transformers,
OPTCL may depute more than one inspecting officer. (iv)Contractor/supplier/manufacturer shall
judiciously plan the inspection/testing schedule and place of inspection/testing, so that optimum
number of inspection/testing and minimum time shall be required to cover all the
equipment/materials of the relevant contract package.
(v) It shall be the responsibility of the Contractor/Supplier to organize the above tour related matters of
OPTCL inspecting officer including the matters related to overseas inspection/testing, if any.
21.0 (a). Detailed information on any litigation or arbitration arising out of contract completed or under
execution by it over the last five years. A consistent history of litigation by or against the bidder may
result in rejection of bid.
21.0 (b). The bidder should not have any pending litigation or arbitration with OPTCL with regard to any
project or related activity. The bidder should certify / declare the same in the unequivocal terms by
way of an affidavit duly sworn before a magistrate/notary. Bid furnished by the bidder shall not be
eligible for consideration if it is not accompanied by the affidavit. Further the bid / LOA/ LOI shall
be liable for outright rejection/ cancellation at any stage if any information contrary to the affidavit /
declaration is detected.
Page 17 of 76
SECTION – II.
GENERAL TERMS AND CONDITIONS OF CONTRACT [G.T.C.C.]
Clause. Title. Page.
1. Scope of the contract. 03
2. Definition of terms. 03
3. Manner of execution. 04
4. Inspection and testing. 04
5. Training facilities. 05
6. Rejection of materials. 05
7. Experience of bidders. 05
8. Language and measures. 06
9. Deviation from Specification. 06
10. Right to reject/accept any tender. 06
11, Supplier to inform himself fully. 07
12. Patent rights etc. 07
13. Delivery. 07
14. Despatch Instructions. 07
15. Supplier’s Default Liability. 07
16 Force Majeure. 07
17. Extension of Time. 08
18. Guarantee Period. 08
19. Bank Guarantee towards Security Deposit, 08
Payment and Performance.
20. Import License. 09
21. Terms of Payment. 09
22. Price Reduction for Delay in Completion of Contract. 20
23. Insurance. 09
24. Payment Due from the Supplier. 09
25. Sales Tax clearance & GST rating, Audited Accounts 09
26. Certificate of exemption from Goods & Services Tax. 10
27. Supplier’s Responsibility. 10
28. Validity. 10
29. Evaluation. 10
30. Minimum qualification criteria of Bidders. 10
31. Jurisdiction of High Court of ODISHA. 11
Page 18 of 76
32. Correspondences. 11
33. Official Address of the Parties to the Contract. 11
34. Outright rejection of Tenders. 12
35. Documents to be treated as confidential. 13
36. Scheme/Projects. 13
Page 19 of 76
PART-I
SECTION-II
GENERAL TERMS AND CONDITIONS OF CONTRACT [G.T.C.C.]
1. Scope of the contract:
The scope of the contract shall be to design, manufacture, supply of equipment as per the
specification at the consignee’s site, and rendering services in accordance with the enclosed technical
specification and bill of quantity.
2.0 Definition of terms:
For the purpose of this specification and General Terms and Conditions of contract [GTCC], the
following words shall have the meanings hereby indicated, except where otherwise described or
defined.
2.1 “The Purchaser” shall mean the Chief General Manager[Central Procurement Cell] for and on behalf
of ODISHA POWER TRANSMISSION CORPORATION LTD., Bhubaneswar.
2.2 “The Engineer” shall mean the Engineer appointed by the Purchaser for the
purpose of this contract.
2.3 “Purchaser’s Representative” shall mean any person or persons or consulting firm appointed and
remunerated by the Purchaser to supervise, inspect, test and examine workmanship and materials of
the equipment to be supplied.
2.4 “The supplier” shall mean the bidder whose bid has been accepted by the purchaser and shall
include the bidder’s executives, administrators, successors and permitted assignees.
2.5 “Equipment” shall mean and include all machinery, apparatus, materials, and articles to be provided
under the contract by the suppliers.
2.6 “Contract Price” shall mean the sum named in or calculated the bid.
2.7 “General Condition” shall mean these General Terms and Conditions of Contract.
2.8 The Specification” shall mean both the technical as well as commercial parts of the specification
annexed to or issued with GTCC and shall include the schedules and drawings, attached thereto as
well as all samples and pattern, if any.
2.9 “Month” shall mean “Calendar month”.
2.10 Writing” shall include any manuscript, type written, printed or other statement reproduction in any
visible form and whether under seal or under hand.
2.11 Basic Price (Taxable value for Goods) at the point of destination” shall mean the price quoted by the
bidder for equipment and material at the consignee’s store/site. The cost is inclusive of packing,
forwarding, freight, insurance and all expenses and taxes & duties at the end of the supplier
excluding Goods & Service Tax. The Goods & Service Tax shall be shown in a separate column item
Page 20 of 76
wise alongside the Basic Price quoted at the applicable rate in the Tax Invoice. The applicable rate of
GST shall refer to the HSN code of the material supplied. The Basic Price and GST thereon shall be
the “FOR Destination Price” as quoted by the bidder.
2.12 The term “Contract document” shall mean and include GTCC, specifications, schedules, drawings,
form of tender, Notice Inviting Tender, covering letter, schedule of prices or the final General
Conditions, any special conditions, applicable to the particular contract.
2.13 Terms and conditions not herein defined shall have the same meaning as are assigned to them in the
Indian Contract Act, failing that in the Odisha General Clauses Act.
3. Manner of execution:
All equipment supplied under the contract shall be manufactured in the manner, set out in the
specification or where not set out, to the reasonable satisfaction of the Purchaser’s representative.
4. Inspection and Testing:
[i] The purchaser’s representative shall be entitled at all reasonable times during manufacture to inspect,
examine and test at the supplier’s premises, the materials and workmanship of all
equipment/materials to be supplied under this contract and if part of the said equipment/material is
being manufactured in other premises, the supplier shall obtain for the purchaser’s representative
permission to inspect, examine and test as if the equipment/material were being manufactured in the
contractor’s premises. Such inspection, examination and testing shall not relieve the supplier from
his obligations under the contract.
[ii] The Supplier shall give to the purchaser adequate time/notice (at least clear 15 days for inside the
state suppliers and 20 days for outside the state suppliers) in writing for inspection of materials
indicating the place at which the equipment/material is ready for testing and inspection and shall also
furnish the shop Routine Test Certificate, Calibration certificates of Testing instruments, calibrated
in Govt. approved laboratory with authenticity letter of that laboratory along with the offer for
inspection. A packing list along with the offer, indicating the quantity which can be delivered in full
truck load/Mini truck load to facilitate issue of dispatch instruction shall also be furnished.
[iii] Where the contract provides for test at the Premises of the supplier or any of his sub-vendors, the
supplier shall provide such assistance, labour, materials, electricity, fuel and instruments, as may be
required or as may be reasonably demanded by the Purchaser’s representative to carry out such tests
efficiently. The supplier is required to produce shop routine test Certificate, calibration certificates of
Testing Instruments before offering their materials/equipment for inspection & testing. The test
house/laboratory where tests are to be carried out must be approved by the Govt. A letter pertaining
to Govt. approved laboratory must be furnished to the purchaser along with the offer for inspection.
[iv] After completion of the tests, the Purchaser’s representative shall forward the test results to the
Purchaser. If the test results conform to the specific standard and specification, the Purchaser shall
Page 21 of 76
approve the test results and communicate the same to the supplier in writing. The supplier shall
provide at least five copies of the test certificates to the Purchaser.
[v] The Purchaser has the right to have the tests carried out at his own cost by an independent agency
whenever there is dispute regarding the quality of supply.
[vi] If the firm fails to present the offered items for inspection/testing as per their inspection call due to
any reason(s) during the visit of inspecting officer at the testing site ,the firm shall have to bear all
expenses towards repetition of inspection and testing of the total offered quantity or part thereof.
5. Training facilities.
The supplier shall provide all possible facilities for training of Purchaser’s Technical personnel,
when deputed by the Purchaser for acquiring first hand knowledge in assembly of the equipment, its
erection, commissioning and for its proper operation & maintenance in service, wherein it is thought
necessary by the purchaser.
6. Rejection of Materials.
In the event any of the equipment /material supplied by the manufacturer is found defective due to
faulty design, bad workmanship, bad materials used or otherwise not in conformity with the
requirements of the Specification, the Purchaser shall either reject the equipment/material or ask the
supplier in writing to rectify or replace the defective equipment/material free of cost to the purchaser.
The Supplier on receipt of such notification shall either rectify or replace the defective
equipment/material free of cost to the purchaser within 15 days from the date of issue of such
notification by the purchaser. If the supplier fails to do so, the Purchaser may:-
[a] At its option replace or rectify such defective equipment /materials and recover the extra costs so
involved from the supplier plus fifteen percent and/or.
[b] Terminate the contract for balance work/supplies, with enforcement of penalty Clause as per contract
for the un-delivered goods and with forfeiture of Performance Guarantee/ CompositeBankguarantee.
[c] Acquire the defective equipment/materials at reduced price, considered equitable under the
circumstances.
7. Experience of Bidders:
The bidders should furnish information regarding experience particularly on the following points:
[i] Name of the manufacturer:
[ii] Standing of the firm and experience in manufacture of equipment/material quoted:
[iii] Description of equipment/material similar to that quoted, supplied and installed during the last two
years with the name(s) of the Organisations to whom supplies were made wherein, at least one (1)
certificate shall be from a state/central P.S.U.
[iv] Details as to where installed etc.
[v] Testing facilities at manufacturer’s works.
Page 22 of 76
[vi] If the manufacturer is having collaboration with another firm [s], details regarding the same.
[vii] A list of purchase orders of identical material/equipment offered as per technical specification
executed during the last two years along with users certificate. User’s certificate shall be legible and
must indicate, user’s name, address, designation, place of use, and satisfactory performance of the
equipment/materials for at least two years from the date of commissioning. Wherein at least one (1)
certificate shall be from a State/Central or P.S.U.Bids will not be considered if the past
manufacturing experience is found to be un-satisfactory or is of less than 2 (two) years on the date of
opening of the bid and bids not accompanying user’s certificate will be rejected..
8. Language and measures:
All documents pertaining to the contract including specifications, schedule, notices, correspondence,
operating and maintenance instructions., drawings or any other writing shall be written in English
language. The metric system of measurement shall be used exclusively in this contract.
9. Deviation from specification:
It is in the interest of the tenderers to study the specification, specified in the tender schedule
thoroughly before tendering so that, if any deviations are made by the Tenderers,(both commercial
and Technical), the same are prominently brought out on a separate sheet under heading “Deviations
Commercial” and “ Deviations Technical”.
A list of deviations shall be enclosed with the tender. Unless deviations in scope, technical
and commercial stipulations are specifically mentioned in the list of deviations, it
shall be presumed that the tenderer has accepted all the conditions, stipulated in the tender
specification, notwithstanding any exemptions mentioned therein.
10. Right to reject/accept any tender:
The purchaser reserves the right either to reject or to accept any or all tenders if the situation so
warrants in the interest of the purchaser. Orders may also be split up between different Tenderers on
individual merits of the Tenderer. The purchaser has exclusive right to alter the quantities of materials/
equipment at the time of placing final purchase order. After placing of the order, the purchaser may defer
the delivery of the materials. It may be clearly understood by the Tenderer that the purchaser need not
assign any reason for any of the above action [s].
11. Supplier to inform himself fully:

The supplier shall examine the instructions to tenderers, general conditions of contract, specification
and the schedules of quantity and delivery to satisfy himself as to all terms and conditions and
circumstances affecting the contract price. He shall quote price [s] according to his own views on
these matters and understand that no additional allowances except as otherwise provided there in will
be admissible. The purchaser shall not be responsible for any misunderstanding or incorrect
Page 23 of 76
information, obtained by the supplier other than the information given to the supplier in writing by
the purchaser.
12. Patent rights Etc.
The supplier shall indemnify the Purchaser against all claims, actions, suits and proceedings for the
infringement of any patent design or copy right protected either in the country of origin or in India by
the use of any equipment supplied by the manufacturer. Such indemnity shall also cover any use of
the equipment, other than for the purpose indicated by or reasonably to be inferred from the
specification.
13. Delivery:-
[a] Time being the essence of the contract; the equipment shall be supplied within the delivery period,
specified in the contract. The Purchaser, however, reserves the right to reschedule the delivery and
change the destination if required. The delivery period shall be reckoned from the date of placing the
Letter of Intent/Purchase order, as may be specified in LOI/Purchase order.
[b] The desired delivery period shall be as indicated at Appendix-II (Quantity & Delivery Schedule)
of Section-IV (Technical Specification).
14. Despatch instructions.
I] The equipment / materials should be securely packed and dispatched directly to the specified site at
the supplier’s risk by Road Transport only.
II] Loading & unloading of Ordered Materials.
It will be the sole responsibility of the supplier for loading and unloading of materials both at the
factory site and at the destination site/store.
The Purchaser shall have no responsibility on this account.
15. Supplier’s Default Liability.
[i] The Purchaser may, upon written notice of default to the supplier, terminate the contract in
circumstances detailed hereunder.
[a] If in the judgement of the Purchaser, the supplier fails to make delivery of equipment/material within
the time specified in the contract or within the period for which if extension has been granted by the
Purchaser in writing in response to written request of the supplier.
[b] If in the judgement of the Purchaser, the supplier fails to comply with any of the provisions of this
contract.
[ii] In the event, Purchaser terminates the contract in whole or in part as provided in Clause-15 {I) of this
section, the Purchaser reserves the right to purchase upon such terms and in such a manner as he may
deem appropriate in relation to the equipment/material similar to that terminated and the supplier will
be liable to the Purchaser for any additional costs for such similar equipment/material and/or for
Page 24 of 76
penalty for delay as defined in clause-22 of this section until such reasonable time as may be
required for the final supply of equipment.
[iii] In the event the Purchaser does not terminate the contract as provided in clause 15(I) of this Section,
supplier shall be liable to the Purchaser for penalty for delay as set out in Clause-22 of this section
until the equipment is accepted. This shall be based only on written request of the supplier and
written willingness of the Purchaser.
16 Force Majeure:
The supplier shall not be liable for any penalty for delay or for failure to perform the contract for
reasons of force majeure such as acts of god, acts of the public enemy, acts of Govt., Fires, floods,
epidemics, Quarantine restrictions, strikes, Freight Embargo and provided that the supplier shall
within Ten (10)days from the beginning of delay on such
account notify the purchaser in writing of the cause of delay. The purchaser shall verify the facts and
grant such extension, if facts justify .
17. Extension of time:-
If the delivery of equipment/material is delayed due to reasons beyond the control of the supplier, the
supplier shall without delay give notice to the purchaser in writing of his claim
for an extension of time. The purchaser on receipt of such notice may or may not agree to extend the
contract delivery date as may be reasonable but without prejudice to other terms and conditions of
the contract.
18. Guarantee period: - ( As per clause 35 of the technical specification.
[i] The stores covered by this specification should be guaranteed for satisfactory operation and against
defects in design, materials and workmanship for a period of at least 18 [Eighteen] months from the
last date of delivery or 12 [Twelve] months from the date of commissioning whichever is earlier. The
above guarantee certificate shall be furnished in triplicate to the purchaser for his approval. Any
defect noticed during this period should be rectified by the supplier free of cost to the purchaser
provided such defects are due to faulty design, bad workmanship or bad materials used, within one
month upon written notice from the purchaser failing which provision of clause 22 (ii) shall apply.
[ii] Equipment/material failed or found defective during the guarantee period shall have to be guaranteed
after repair/replacement for a further period of 12 months from the date of commissioning or
18 months from the date of receipt at the store/site after such repair/replacement whichever is earlier
. The Bank Guarantee is to be extended accordingly. Date of delivery as used in this clause shall
mean the date on which the materials are received in OPTCL’S stores/site in full & good condition
which are released for Despatch by the purchaser after due inspection.
19. B.G. towards security deposit, 100% payment and performance guarantee:
[i] For manufacturers situated Inside & out side the state of Odisha.
Page 25 of 76
A Composite Bank Guarantee as per the Proforma enclosed at Annexure-VII of the specification for
10% [ten percent] of the Total Landing cost (Taxable Value plus GST thereon) of the purchase order
(In case of successful bidder who is a local Micro and small Enterprise(MSEs) (In the state of
Odisha) registered with respective DICs, Khadi, Village, Cottage & Handicrafts Industries, OSIC
and NSIC 5% (five percent) shall be furnished from any nationalized/scheduled bank having a place
of business at Bhubaneswar, to the office of Chief General Manager [Central Procurement Cell]
OPTCL within 15 days from the date of issue of the purchase order,. The BG shall be executed on
non-judicial stamp paper worth of Rs.29.00 [Rupees twenty nine] only or as per the prevalent rules,
valid for a period of 2 months more than the Guarantee Period, for scrutiny and acceptance, failing
which the supply order will be liable for cancellation without any further written notices. The BG
should be accompanied by a confirmation letter from the concerned bank and should have provision
for encashment at Bhubaneswar, before the Bank Guarantee is accepted and all concerned intimated.
The B.G should be revalidated as and when intimated to you to cover the entire guarantee period.
[ii] No interest is payable on any kind of Bank Guarantee.
[iii] In case of non-fulfillment of contractual obligation, as required in the detailed purchase
order/Specification, the composite Bank guarantee shall be forfeited.
20. Import License
In case imported materials are offered, no assistance will be given for release of Foreign Exchange.
The firm should arrange to import materials from their own quota. Equipment of indigenous origin
will be preferred.
21. (A) Terms of Payment.
i) 100% taxable value of each consignment with 100% Goods and Services Tax in full as applicable
will be paid on receipt of materials in good condition at stores/desired site and verification thereof,
subject to furnishing and approval of a. Contract cum Performance Bank Guarantee at the rate of
10% (Ten percent) of Taxable Value plus GST thereon [In case successful bidder is a local
Micro and small Enterprise (MSEs), based in Odisha & registered with respective DICs,
Khadi, Village, Cottage & Handicrafts Industries, OSIC and NSIC, 5% (five percent) in
place of 10% (ten percent) will be applicable].
b.Guarantee certificate, c.Test certificate by the Purchaser.
ii) TDS under GST Laws for intra state transactions shall be deducted, if applicable.
iii)Any imposition of new tax or revision of tax shall be paid/reimbursed at the time of dispatch,
scheduled or actual whichever is lower (i.e. If delivery is within schedule period, tax variation as
applicable shall be paid, and if delivery is made beyond schedule date, any additional financial
implication due to statutory variation in tax shall be to bidder’s account)
Page 26 of 76
[B] The supplier shall furnish contract cum performance Bank Guarantee of appropriate amount
to OPTCL as indicated in (i) above, within 30 days from the date of issue of the purchase order.
22 Price Reduction Schedule for Delay in Completion of Supply under Purchase Order/Contract
(i) If the Supplier fails to deliver the materials/equipment within the delivery schedule, specified in
the Purchase Order/Contract including delivery time extension, if any, granted with waiver of Price
Reduction Schedule, the Purchaser shall recover from the Supplier, Price Reduction Schedule for a
sum of half per cent (0.5 per cent) of the Taxable Value of the un-delivered equipment /materials for
each calendar week of delay or part thereof. For this purpose, the date of receipted challan shall be
reckoned as the date of delivery. The total amount of Price Reduction Schedule shall not exceed five
per cent (5%) of the Taxable Value of the un-delivered equipment/materials. Equipment will be
deemed to have been delivered only when all its components, accessories and spares as per technical
Specification are also delivered. If certain components, accessories and spares are not delivered in
time, the equipment/materials will be considered delayed until such time as the missing components,
accessories and spares are delivered.
(ii) During the guarantee period, if the Supplier fails to rectify/replace the equipment/material within
30 days from the date of intimation of defect by the purchaser, then the Price Reduction Schedule at
the rate of half percent (0.5%) of the Total Taxable Value for each calendar week of delay or part
thereof shall be recovered by the purchaser. For this purpose, Price Reduction Schedule shall be
reckoned from the 30th day from the date of issue of letter on defectiveness of equipment/material.
The total amount of Price Reduction Schedule in this case shall not exceed 10% (TEN PERCENT) of
the Purchase Order/Contract amount except GST (i.e.Total Taxable Value). If the defects, so
intimated are not rectified or equipment/materials not replaced by the supplier within the guarantee
period, then whole of the C.P.B.G. will be forfeited by the purchaser, without any intimation to the
supplier.
23. Insurance
The Supplier shall undertake insurance of stores covered by this Specification unless otherwise
stated. The responsibility of delivery of the stores at destination in good condition rests with the
Supplier. Any claim with the Insurance Company or transport agency arising due to loss or damage
in transit has to be settled by the supplier. The Supplier shall undertake free replacement of materials
damaged or lost, which will be reported by the consignee within 30 days of receipt of the materials at
destination without awaiting for the settlement of their claims with the carriers and underwriters.
24. Payment Due from the Supplier. All costs and damages, for which the supplier is liable to the
purchaser, will be deducted by the purchaser from any money, due to the supplier, under any of the
contract (s), executed with OPTCL.
Page 27 of 76
25. Sales Tax clearance certificate , Rating under Goods and Services Tax and Balance sheet and
profit & Loss Account:
The following documents are to be submitted at the time of Tender Submission:
i. Compliance rating under Goods and Services Tax for immediate preceding financial year.
ii. Audited Balance Sheet and Profit & Loss Account of the bidder for the previous three years to
assess the financial soundness of the bidder(s).
iii. GST registration certificate and PAN Card Copy.
iv. Tax holiday/exemption certificate under GST or any other Act.
v. TDS exemption certificate under the Income Tax Act or any other act.
26. Certificate of Exemption from Goods and Services Tax.
Offers with exemption from Goods and Services Tax shall be accompanied with authenticated
attested Photostat copy of exemption certificate. Any claim towards Goods and Services Tax shall be
paid on actual basis subject to payment of GST by the supplier. In case Outward supply details of the
supplier of Goods in GSTR-1 do not match with GSTR -2 of OPTCL on GSTN portal, the same will
be adjusted through debit/credit advice issued by OPTCL under intimation to the supplier after
allowing cooling period of 3 months after the date of supply.
27. Supplier’s Responsibility.
Notwithstanding anything mentioned in the Specification or subsequent approval or acceptance by
the Purchaser, the ultimate responsibility for design, manufacture, materials used and satisfactory
performance shall rest with the Tenderers. The Supplier(s) shall be responsible for any discrepancy
noticed in the documents, submitted by them along with the bid(s)
28. Validity.
Prices and conditions contained in the offer should be kept valid for a minimum period of 180 days
from the date of opening of the tender, failing which the tender shall be rejected.
29. EVALUATION.
(i) Evaluation of price bids will be on the basis of the FOR DESTINATION PRICE including Goods
and Services Tax & other levies as may be applicable. The FORD PRICE shall consist of the
following components:
a) Taxable value of equipment/materials including mandatory spares, if any for maintenance of
equipment. (At discretion of the purchaser )
b)Good and Services Tax
c)Other levies, if any.
d)Test charges, if any.
e)Supervision of erection, testing and commissioning charges, if any.
f)Any other items, as deemed proper for evaluation by the purchaser.
g) Loading will be made for items not quoted by the bidder at the highest rate quoted by other
bidders unless particular item is included in other items.
h) Any imposition of new tax or revision of tax shall be considered between due date of submission
of bids and the date of price bid opening.
Page 28 of 76
(II) Weightage shall be given to the Following factors in the Evaluation & Comparison of Bids.
In comparing bids and in making awards, the Purchaser will consider other factors such as
compliance with Specification, minimum qualification criteria as per clause-30, outright rejection of
tenders clause-34 of this tender, relative quality, adaptability of Supplies or services, experience,
financial soundness, record of integrity in dealings, performance of materials/equipment earlier
supplied, ability to furnish repairs and maintenance services, the time of delivery, capability to
perform including available facilities such as adequate shops, plants, equipment and technical
organization.
(III) The local MSE (In the state of Odisha) bidders shall be required to furnish their willingness to
match their bid price with that of the lowest evaluated bidder without any price preference and in
case they agree, they shall be eligible to get up to 30% of the tendered quantity to be distributed
suitably among the willing MSE bidders failing which the said 30% of the tendered quantity be
awarded to the lowest evaluated bidder.
30. Minimum Qualification Criteria of Bidders.

All the prospective bidders are requested to note that their bids for tendered equipment
can only be considered for evaluation if:
i) The bidder should have manufacture and supply experience of above rated or higher
capacity equipment for a minimum period of 3 (three) years as on the date of opening of
the tender
ii) At least 50% of the tendered quantity of above rated or higher capacity equipment should
have been supplied within the above-stipulated period.
iii) The above rated or higher capacity equipment should have at least 3 (three) years
successful performance from the date of commissioning. At least one of the
performance certificates shall be submitted from Govt. of India/State Govt.(s) or their
undertakings.
iv) The bidder should have conducted type tests on the tendered equipment in
Government approved laboratory within five years from the date of opening of the
tender..
31. Jurisdiction of the High Court of Orissa.
`Suits, if any, arising out of this contract shall be filed by either Party in a court of Law to
which the jurisdiction of High court of Orissa extends.
32. Correspondences.
i) Any notice to the supplier under the terms of the contract shall be served by Registered
Post or by hand at the Supplier’s Principal Place of Business.
ii) Any notice to the Purchaser shall be served at the Purchaser’s Principal Office in the
same manner.
Page 29 of 76
33. Official Address of the Parties to the Contract
The address of the parties to the contract shall be specified:-
[i] Purchaser: Senior General Manager (Procurement)(CPC) OPTCL
Bhubaneswar-751022 (Orissa)
Telephone No. 0674 - 2541801
FAX No. 0674 - 2542964
[ii] Supplier: Address
Telephone No.
Fax No.
34. Outright Rejection of Tenders
Tenders shall be outrightly rejected if the followings are not complied with.
[i] The tenderer shall submit the bid in electronic mode only and shall submit the tender
cost on or before the date and time of submission of technical bid. In case of local Micro
and small Enterprises(MSEs) registered with respective DICs, Khadi, Village, Cottage &
Handicrafts Industries, OSIC and NSIC participating in the tender they have to submit
notarised hard copy of valid registration as local MSE as above on or before the date and
time of submission of technical bid.
[ii] The tenderer shall submit the bid in electronic mode only
[iii] The Tender shall not be submitted telegraphically or by FAX.
[iv] The prescribed EMD shall be submitted on or before the date and time of submission of
technical bid.
[v] The Tender shall be kept valid for a minimum period of 180 days from the date of opening
of tender.
[vi] The Tender shall be submitted in two parts as specified.
[vii] The Tenders shall be accompanied by a list of major supplies effected prior to the date of
opening of tender. Data of at least 3 (three) years shall be furnished.
[viii] The tenderer shall upload the scanned copy of latest type test certificates (for the tests,
carried out on the tendered equipment, being offered). Such type tests should have been
conducted within last five years from the date of opening of this tender in a Government
approved laboratory/CPRI in presence of any Government Organisation’s
representative(s).
[ix] The schedule of prices should be filled up fully to indicate the break-up of the prices
including taxes and duties. Incomplete submission of this schedule will make the tender
liable for rejection. Vide Clause-4(ii) of Part-II..
[x] The Tenderer should quote ‘FIRM’ price only and the price should be kept valid for a
minimum period of 180 days from the date of opening of the tender.
(xi) The tenderer shall upload the scanned copy legibly written user’s certificate to prove the
satisfactory operation of the offered equipment/materials for a minimum period of 3
Page 30 of 76
(three) years from the date of commissioning/use as per the tender specification. User’s
certificate shall include the detailed address of the user with Equipment/Material, Name
and type as per this specification, number of years of satisfactory use/operation & date of
issue of this user’s certificate with official seal written in English only & clearly visible
must be furnished. At least one of the user’s certificates shall be from state or Central
Govt. or their Undertakings.
(xii) Guaranteed Technical particulars & Abstract of terms and Conditions should be filled in
completely.
(xiii) (a) Detailed information on any litigation or arbitration arising out of contract completed or
under execution by it over the last five years. A consistent history of litigation by or against the
bidder may result in rejection of bid.
(b) The bidder should not have any pending litigation or arbitration with OPTCL with regard to any project
or related activity. The bidder should certify/declare the same in unequivocal terms by way of an affidavit
duly sworn before a magistrate. Bid furnished by the bidder shall not be eligible for consideration if it is not
accompanied by the affidavit. Further, the bid/LOA/LOI shall liable for outright rejection/cancellation at any
stage if any information contrary to the affidavit/declaration is detected.
35. Documents to be treated as confidential.

The supplier shall treat the details of the specification and other tender documents as
private and confidential and these shall not be reproduced without written authorization
from the Purchaser.
36. Scheme/Projects
The materials/equipment covered in this specification shall come under “O&M WORKS “
Page 31 of 76
SECTION – III
[LIST OF ANNEXURES]
The following schedules and proforma are annexed to this specification and contained in Section-III
as referred to in the relevant clauses.
1 Declaration form ANNEXURE-I
2 Abstract of terms and conditions to accompany Section-II ANNEXURE-II
of
3 Schedule of Quantity and Delivery ANNEXURE-III
4 Abstract of price component ANNEXURE-IV
5 Schedule of prices ANNEXURE-V
6 Bank Guarantee form for earnest money deposit ANNEXURE-VI
7 Composite Bank Guarantee form for security deposit, ANNEXURE-VII
payment and performance
8. Chart showing particulars of E.M.D. ANNEXURE – VIII
9. Data on Experience. ANNEXURE – IX
10. Schedule of spare parts. ANNEXURE-X
11. Schedule of Installations. ANNEXURE-XI
12 Schedule of deviations ( Technical) ANNEXURE-XII (A)
13. Schedule of deviations (Commercial) ANNEXURE-XII (B)
14 Litigation /Arbitration ANNEXURE-XIII
Page 32 of 76
ANNEXURE - I
DECLARATION FORM
To
The Chief. General Manager (CPC)

OPTCL Head Qrs.BBSR,751022
Sub:- Tender Specification No-_________________________________________
Sir,
1. Having examined the above specification together with terms & conditions referred to therein * I/We
the undersigned hereby offer to supply the materials/equipment covered therein complete in all
respects as per the specification and General conditions, at the rates, entered in the attached contract
schedule of prices in the Tender.
2. * I/We hereby undertake to have the materials/equipment delivered within the time specified in the
Tender.
3. * I/We hereby guarantee the technical particulars given in the Tender supported with necessary
reports from concerned authorities.
4. * I/We certify to have submitted the bid electronically by remitting *cash/money order/D.D./
remitting the cost of tender, herewith and this has been acknowledged by your letter/ money receipt
No. Dated,
5. In the event of Tender, being decided in *my/our favour, * I/We agree to furnish the Composite B.G.
in the manner, acceptable to ODISHA POWER TRANSMISSION CORPORATION LTD., and for
the sum as applicable to *me/us as per clause-19 of section-II of this specification within 15 days of
issue of letter of intent/purchase order failing which *I/We clearly understand that the said letter of
Intent/Purchase order will be liable to be withdrawn by the purchaser, and the EMD deposited by us
shall be forfeited by OPTCL.
Signed this day of 2016
Yours faithfully
Signature of the Tenderer with seal of the company
[This form should be dully filled up by the tenderer and uploaded at the time of submission of tender.]
* (Strikeout whichever is not applicable).
Page 33 of 76
ANNEXURE-II
ABSTRACT OF GENERAL TERMS AND CONDITIONS OF CONTRACT
[COMMERCIAL]
(To be filled up by the tenderer as indicated in the excel sheet)
ANNEXURE-III
SCHEDULE OF QUANTITY AND DELIVERY
(To be filled up by the tenderer)
SL Description of materials Quantity Desired Destinatio Remarks.
No required Delivery n
1 2 3 4 5 6
Signature of Tenderer
with seal of Company
Page 34 of 76
ANNEXURE-IV
NB:- Abstract of price component shall be done for equipment/material offered, for testing &
commissioning charges, if any. All the above prices will be taken during bid price
evaluation.
Page 35 of 76
ANNEXURE-V.
NB: -
1. The tenderer should fill up the price schedule properly in Excel file in e-tender mode. The
tender will be rejected, if the price bid is not submitted in accordance with the price schedule.
No post tender correspondence will be entertained on break-up of prices. Also, the supplier
should agree for delivery at the desired site.
2. The Tenderer shall give an undertaking in part-I of the bid that, entire implication of lower
Tax and Input Tax Credit benefit have been fully passed on to the purchaser as per anti-
profiteering and other provisions under GST Laws while quoting the tender price.
3. Conditional offers will not be acceptable.
Page 36 of 76
ANNEXURE-VI
PROFORMA FOR BANK GUARANTEE FORM FOR EARNEST MONEY DEPOSIT
Ref Date Bank Guarantee No:
1 In accordance with invitation to Bid No. Dated of ODISHA
POWER TRANSMISSION CORPORATION LTD. [OPTCL][herein after referred to
as the OPTCL for the purchase of
___________________________________________
Messers____________________________________________________________
Address______________________________________________________________
________________________________________________________________wish/
wished to participate in the said tender and as a Bank Guarantee for the sum of
Rs.______________[Rupees________________________________________
Valid for a period of 240 days [Two hundred forty days] is required to be submitted
by the Tenderer. We the
__________________________________________________________________
[Indicate the Name
of the Bank]
[Hereinafter referred to as ‘the Bank’] at the request of M/S
__________________________________________________________________
[Herein after referred to as supplier (s)] do hereby unequivocally and unconditionally
guarantee and undertake to pay during the above said period, on written request by the
Chief General Manager [Procurement] ODISHA POWER TRANSMISSION
CORPORATION LTD._______________________________________________
Page 37 of 76
[Indicate designation of the purchaser]
an amount not exceeding Rs._________________to the OPTCL, without any
reservation. The guarantee would remain valid up to ___________________
[date] and if any further extension to this is required, the same will be extended on
receiving instructions from the_______________________________________ on
whose
behalf this guarantee has been issued.
2. We the _____________________________________do hereby, further undertake

[Indicate the name of the bank]
to pay the amounts due and payable under this guarantee without any demur, merely
on a demand from the OPTCL stating that the amount claimed is due by way of loss
or damage caused to or would be caused to or suffered by the OPTCL by reason of
any breach by the said supplier [s] of any of the terms or conditions or failure to
perform the said Bid . Any such demand made on the Bank shall be conclusive as
regards the amount due and payable by the Bank under this guarantee. However, our
liability under this guarantee shall be restricted to an amount not exceeding
Rs._____________________________________________
3. We undertake to pay the OPTCL any money so demanded not withstanding any
dispute or disputes so raised by the contractor [s] in any suit or proceeding
instituted/pending before any Court or Tribunal relating thereto, our liability under
this present being absolute and unequivocal. The payment so made by us under this
bond shall be a valid discharge of our liability for payment there under and the
supplier(s) shall have no claim against us for making such payment.
4. We, the______________________________________further agree that the guarantee
[Indicate the Name of the Bank]
Page 38 of 76
herein contained shall remain in full force and effect during the aforesaid period of
240 days [two hundred forty days] and it shall continue to be so enforceable till all the
dues of the OPTCL under or by virtue of the said Bid have been fully paid and its
claims satisfied or discharged or till Managing Director, ODISHA POWER
TRANSMISSION CORPORATION LTD. certifies that the terms and conditions of
the said Bid have been fully and properly carried out by the said Supplier [s] and
accordingly discharges this guarantee. Unless a demand or claim under this guarantee
is made on us in writing on or before the _________________
we shall be discharged from all liability under this guarantee thereafter.
5. We, the _______________________________further agree with the OPTCL that
[Indicate the name of the Bank]
the OPTCL shall have the fullest liberty without our consent and without affecting in
any manner our obligations hereunder to vary any of the terms and conditions of the
said Bid or to extend time of performance by the said Supplier [s] from time to time
or to postpone for any time or from time to time any of the powers exercisable by the
OPTCL against the said supplier [s] and to forbear or enforce any of the terms and
conditions relating to the said bid
and we shall not be relieved from our liability by reason of any such variation,
postponement or extension being granted to the said Supplier [s] or for any
forbearance act or omission on the part of the OPTCL or any indulgence by the
OPTCL to the said Supplier[s] or by any such matter or thing whatsoever which under
the law relating to sureties would, but for this provision, have effect of so relieving us.
6. This guarantee will not be discharged due to the change in the name, style and
constitution of the Bank or the supplier [s].
Page 39 of 76
7. We,____________________________________lastly undertake not revoke this
[Indicate the name of the Bank]
Guarantee during its currency except with the previous consent of the OPTCL
in writing.
8. We the _________________________________ Bank further agree that this
guarantee shall also be invokable at our place of business at -------------- Branch of
Bhubaneswar ( indicate the name of the branch)in the state of ODISHA.
Notwithstanding anything contained herein.
1) Our liability under this bank guarantee shall not exceed Rs.--------------------------(
Rupees-------------------).
2) The bank guarantee shall be valid up to dt.-----------------
3) We are liable to pay the guaranteed amount or any part there of under this bank
guarantee only & only if you serve upon us at --------------branch at Bhubaneswar
( indicate the name of the branch) a written claim or demand on or before dt.-------
----------.
Dated ________________________ Day of _________________________
For_____________________________
[Indicate the name of Bank]
Witness ((Signature, names & address)
1.
2.
Page 40 of 76
N.B. : To be Stamped in accordance with Stamp Act and the Non-Judicial Stamp
Paper of appropriate value should be in the name of Issuing Bank
ANNEXURE-VII
PROFORMA FOR COMPOSITE BANK GUARANTEE FOR SECURITY DEPOSIT
PAYMENT AND PERFORMANCE
This Guarantee Bond is executed this________________________day
of_______________ 20-- by us the
_______________________________________Bank at _____________________
P.O.____________________________P.S.________________________________
District_________________________State_______________________________
1. WHEREAS the ODISHA POWER TRANSMISSION CORPORATION LTD., a

body corporate constituted under the Electricity Act, 2003 [hereinafter called “the
OPTCL” which shall include its successors and assigns has placed orders No.
_______________Date ______________[hereinafter called “The Agreement”] on
M/s.______________________________________
[hereinafter called “The Supplier”] which shall include its successors & assigns for
supply of materials.
AND WHERE AS the supplier has agreed to supply materials to the OPTCL
in terms of the said agreement AND
WHEREAS the OPTCL has agreed [1] to exempt the supplier from making
payment of Security [2] to release 100% payment of the cost of materials as per the
said agreement and [3] to exempt from performance guarantee on furnishing by the
Page 41 of 76
Supplier to the OPTCL, a Composite bank Guarantee of the value of 10 % [ten
percent] of the contract price of the said agreement.
NOW THEREFORE, in consideration of the OPTCL having agreed [1] to
exempt the Supplier from making payment of Security [2] releasing 100% payment to
the Supplier and [3] to exempt from furnishing performance guarantee in terms of the
said agreement as aforesaid, we, the ________________________________
[Bank][hereinafter referred to as ‘the Bank’] do hereby undertake to pay to the
OPTCL an amount not exceeding Rs._____________
[Rupees_____________________________against any loss or damage caused to or
suffered by or would be caused to or suffered by the OPTCL by reason of any breach
by the said Supplier [s] of any of the terms or conditions contained, in the said
agreement.
2. We the (______________________________________Bank) do hereby undertake to

pay the amounts due and payable under this guarantee without any demur, merely on
demand from the OPTCL stating that the amount claimed is due by way of loss or
damage caused to or suffered by the OPTCL by reason of any breach by the said
Supplier [s] of any of the terms or conditions, contained in the said agreement or by
reason of the supplier’s failure to perform the said agreement. Any such demand made
on the bank shall be conclusive as regards the amount due and payable by the Bank
under this guarantee. However, our liability under this guarantee shall be restricted to
an amount not exceeding Rs.__________________
[Rupees____________________________________________________________
3. We the_____________________________ Bank} also undertake to pay to the
OPTCL any money so demanded not withstanding any dispute or disputes raised by
the supplier [s] in any suit or proceeding instituted/pending before any Court or
Tribunal relating thereto our liability under this present being absolute and
unequivocal.
Page 42 of 76
The payment so made by us under this bond shall be a valid discharge of our
liability for payment there under and the Supplier [s] shall have no claim against us
for making such payment.
4 We, (_____________________________________Bank) further agree that the
guarantee herein contained shall remain in full force and effect during the period that
would be taken for the performance of the said agreement and that it shall continue to
do so enforceable till all the dues of the OPTCL under or by virtue of the said
agreement have been fully paid and its claims satisfied or discharged or till Managing
Director, ODISHA POWER TRANSMISSION CORPORATION LTD. certifies that
the terms and conditions of the said agreement have been fully and properly carried
out by the said Supplier [s] and accordingly discharges this Guarantee.
Unless a demand or claim under this guarantee is made on us in writing on or
before the [Date________________], we shall be discharged from all liability under
this guarantee thereafter.
5. We,(_____________________________Bank) further agree that the OPTCL shall have
the fullest liberty without our consent and without affecting in any manner our
obligations hereunder to vary any of the terms and conditions of the said agreement or
to extend time of performance by the said Supplier [s] and we shall not be relieved
from our liability by reason of any such variations or extension being granted to the
said supplier [s] or for any forbearance, act or omission on the part of the OPTCL or
any indulgence by the OPTCL to the said Supplier [s] or by any such matter or thing
whatsoever which under the law relating to sureties would but these provisions have
effect of so relieving us.
Page 43 of 76
6. This guarantee will not be discharged due to the change in the name , style and
constitution of the Bank and supplier [s].
7. We,[________________________Bank] lastly undertake not to revoke this guarantee
during its currency except with the previous consent of the OPTCL in writing.
8. We the _________________________________ Bank further agree that this
guarantee shall also be invokable at our place of business at ------------ Branch of
Bhubaneswar ( indicate the name of the branch)in the state of ODISHA.
Notwithstanding anything contained herein.
1) Our liability under this bank guarantee shall not exceed Rs.--------------------------(
Rupees-------------------).
2) The bank guarantee shall be valid up to dt.-----------------
3) We are liable to pay the guaranteed amount or any part there of under this bank
guarantee only & only if you serve upon us at --------------branch at Bhubaneswar a
written claim or demand on or before dt.-----------------.
Dated ________________________ Day of _________________________
For_____________________________
[Indicate the name of Bank]
Witness ((Signature, names & address)
1.
Page 44 of 76
2.
N.B. : To be Stamped in accordance with Stamp Act and the Non-Judicial Stamp
Paper of appropriate value should be in the name of Issuing Bank
ANNEXURE-VIII
CHART SHOWING PARTICULARS OF EARNEST MONEY DEPOSIT
FURNISHABLE BY TENDERERS
1. Central and State Government Undertakings Exempted
2. All other inside & outside state units. The amount of EMD
as specified in the
specification /Tender
Notice in shape of
bank guarantee /DD.
NB: - REFUND OF E.M.D.
[a] In case of unsuccessful tenderers, the EMD will be refunded immediately after the
tender is decided. In case of successful tenderer, this will be refunded only after
Page 45 of 76
furnishing of Composite Bank Guarantee referred to in clause No.19 of Section-II of
this specification.
Suits, if any, arising out of EMD shall be filed in a court of law to which the
jurisdiction of High Court of ODISHA extends.
[b] Earnest Money will be forfeited if the tenderer fails to accept the letter of
intent/purchase order, issued in his favour or revises the bid price[ s] within the
validity period of Bid.
Page 46 of 76
ANNEXURE-IX
DATA ON EXPERIENCE
[a] Name of the manufacturer.

[b] Standing of the firm as manufacturer of equipment quoted.
[c] Description of equipment similar to that quoted [supplied and installed during the last
two years with the name of the organizations to whom supply was made].
[d] Details as to where installed etc.
[e] Testing facilities at manufacturer’s works.
[f] If the manufacturer is having collaboration with another firm, details regarding the
same and present status.
[g] A list of purchase orders, executed during last three years.
[h] A list of similar equipment of specified MVA rating, voltage class, Impulse level,
short circuit rating, Designed, manufactured, tested and commissioned which are in
successful operation for at least two years from the date of commissioning with legible user’s
certificate. User’s full complete postal address/fax/phone must be indicated. (Refer clause
No.7 of the Part-I, Section-II of the specification).
Place:
Date:
Signature of tenderer
Name, Designation, Seal
Page 47 of 76
ANNEXURE-X
SCHEDULE OF SPARE PARTS FOR FIVE YEARS OF NORMAL OPERATION
& MAINTENANCE
SL. Particulars Quantity Unit delivery rate Total price
No
Place:
Date: Signature of Tenderer
Page 48 of 76
ANNEXURE-XI
SCHEDULE OF INSTALLATIONS.
Place of installation and Year of

complete postal address commissioning
Place: -
Date Signature of Tenderer:
Page 49 of 76
ANNEXURE-XII
DEVIATION SCHEDULE.
Tenderer shall enter below particulars of his alternative proposal for deviation
from the specification, if any.
A) Technical
B) Commercial deviations.
Place: -
Page 50 of 76
ANNEXURE – XIII
LITIGATION HISTORY
Year. Award for or Name of client, Disputed amount
against bidder cause of litigation (current value in
and matter in Rs.)
dispute
Place: -
Page 51 of 76
PART – II
PRICE BID
1. PRICE:
(i) Bidders are required to quote their price(s) for goods offered indicating they are ‘FIRM’
(ii) The prices quoted shall be FOR Destination only at the consignee’s site/store inclusive of
packing, forwarding, Freight & Insurance. In addition, the break-up of FOR Destination price
shall be given as per schedule of Prices in Annexure-V of Section – III. The Bidders has to
certify in the price bid that any implication of lower Tax and Input Tax Credit benefit as per
anti-profiteering and other provisions under GST Laws, have been fully passed on to the
Purchaser, while quoting the tender prices.
2. INSURANCE:
Insurance of materials/equipment, covered by the Specification should normally be done by
the Suppliers with their own Insurance Company unless otherwise stated. The responsibility
of delivery of the materials/equipment at destination stores/site in good condition rests with
the Supplier. Any claim with the Insurance Company or Transport agency arising due to loss
or damage in transit has to be settled by the Supplier. The Supplier shall undertake free
replacement of equipment/materials damaged or lost which will be reported by the Consignee
within 30 days of receipt of the equipment/materials at Destination without awaiting for the
settlement of their claims with the carriers and underwriters.
3. CERTIFICATE FOR EXEMPTION FROM GOODS AND SERVICES TAX:
Offers with exemption from Goods and Services Tax shall be accompanied with
authenticated proof of such exemption. Authenticated proof for this clause shall mean
Photostat copy of exemption certificates, attested by Gazetted Officers of State or Central
Government.
4. PROPER FILLING UP OF THE PRICE SCHEDULE:
The Bidders should fill up the price schedule (Annexure-V of Section-III) properly and in
full. The tender may be rejected if the schedule of price is submitted in incomplete form as
per clause-34 (ix) of Section-II of the Specification.
5. NATURE OF PRICE INDICATED IN SPECIFICATION SHALL BE FINAL.
The nature of price indicated in the Clause-13, Section – I of PART –I of the Specification
shall be final and binding.
Page 52 of 76
SECTION-IV
TECHNICAL SPECIFICATION
FOR
PROCUREMENT OF
Cost of
Tota Est. Last dat
L Tender
Sl. ITEM 2018- 2019- Total Cost EMD in receipt
o Spec.
No. DESCRIPTION 19 20 (in Rs.) Rupees opening
t. document
in lakhs tende
(in Rs.)
400 KV HCB -
6 73.00 73,000/-
I i with Double 3 3
E/S,2000A
132KV SI W/O 6 20.21
i 0 6
E/S,2000A.
132 KV Double
ii Isolator 0 7 7 45.37
with E/S,2000A.
Motor operating
mechanism box
for 132 KV
1,88,950/-
II Isolator with
aluminium
iii 100 100
+ 10 NC auxiliary
contact with three
phase AC motor
with retrofitting
as per OPTCL
specification.
10,000+ 22/10/2
33KV SI W/O 11 14.86
i 5 6
E/S,2000A UP TO 01
GST 12%-
33 KV Double
5 11.29 1200/- &
ii Isolator 0 5
=11,200/-
W/O E/S,2000A 22/10/2
33 kV Beam
12 19.35 AT 03-00
iii Mounted 6 6
isolator, 2000A
II Motor operating
1,85,555/-
I mechanism box
for 33 KV Isolator
with aluminium
enclosure,10 NO
iv + 10 NC auxiliary 150 150 300 185.05
contact with three
phase AC motor
with retrofitting
as per OPTCL
specification.
420 KV, 63 KA
3.0 Sec,3150A,
98,50,05
I Tripple pole HCB 10 98,500/-
i 10 0 0.00
V Isolator with 1
motor operated
E/S, along with
Page 53 of 76
support
insulators (CD
1302mm)
Terminal
connector for 420
KV Isolator to 54
ii 54 0
receive quad
moose ACSR
conductor.
Terminal
connector for 420
receive 4.5" Al
tube.
Page 54 of 76
SECTION-IV
TECHNICAL SPECIFICATION OF ISOLATORS

Sl.N Type 400KV 220KV 132KV 33KV
O.
1 Main Switch HCB DBCR
2 Service Outdoor
3 Applicable IS : 9921 / IEC-129/IEC-62271-102
standard
4 Pole 3 pole gang operator
5 Rated voltage 400/420 220/245 132/145 33/36
nominal /
maximum
6 Rated frequency 50 HZ + 5%
7 System earthing effectively earthed
8 Temperature rise As per relevant IS/IEC publication
9 Insulation level impulse with stand voltage
(a) Across Isolating 1665 1200 750 195
distance
(kV peak)
(b) To earthed & 1425 1050 650 170
between poles
(kV Peak
10 1 minute power frequency with stand voltage
(a) Across Isolating 610 530 315 80
distance
(kV Peak)
(b) To earthed & 520 460 275 70
between poles
(kV Peak
11 Max. RIV for 1000 at 1000 at 500 at
frequency 267kV 156kV 92kV
between 0.5 MHz
and 2 MHz
12 Corona Extinction 320 ---- ---- ------------
Voltage (kV)
--
13 Rated current 2000A
14 Short time current 63KA 40KA 31.5KA 25KA
for 3 sec
15 Operating Motor Motor Motor Motor
Page 55 of 76
mechanism
16(a) Auxiliary voltage 220V DC (80% to 110%)
for control,
interlock &
indication
16(b) Auxiliary voltage 415V, 3 phase, AC, 50Hz/220V, 1 phase, AC,
for Motor, heater,
50Hz
lamp & socket
17(a) Safe duration of 5 minutes
Over load( 150%
over load
17(b) Safe duration of 30 minutes
Over load( 120%
over load
18 Insulator Data
a Bending Strength 800 800 600 600
(kgf)
b Height (mm) 3650 2300 1500 508
c Bottom PCD (mm) 300 254 184 76
d Top PCD (mm) 127 127 127 76
e Minimum
creepage distance 10500 900
of support and 6125 mm 3625 mm
mm mm
Rotating
insulators
19 Phase to phase 1500
spacing 7000 mm 4500 mm 3000 mm
mm
20 Mounting Upright on steel structure
structure
21 Terminal Bimetallic if pad is of copper or else aluminium
connector type clamp as per requirement & rating
22 Control Local / Local / Local / Local
Remote Remote Remote
23 Operating time 12 second 12 second or 12 second 12
or less less or less second
or less
24 Earth Switch Local(mot Local(motorize Local(mot Manua
orized) / d) / manual orized) / l
manual manual
Page 56 of 76
1.SCOPE
This specification provides for design, manufacture, testing at
manufacturer’s works and delivery ,supervision of erection, commissioning(if
required )of following type.
(A) Outdoor type 400KV Horizontal Centre Break Isolator comprises
three identical triple pole units which consists of galvanized rigid base
made of distortion resistant structural steel having fixing arrangement
with the supporting structure and also having two rotating bearing unit
on both sides each base with interconnecting pipe fixing clamps for
tandem and link pipe. Porcelain insulators made of composite stacks of
rated capacity carrying male & female contact assembly are fixed on
the rotating bearing unit of base of each pole. Two units of each pole
interconnected by link pipes & finally, all three pole are connected to
group operating pipe. Movement of group operating pipe for closing &
opening operation of isolator is done by Down pipe connected to the
operating mechanism(Motor/Manual). Thus, all three poles of the
Isolator shall be mechanically gang operated by a common operating
mechanism to ensure that operations of all three poles are
simultaneous.
Double Earth Switch should be provided i.e one on Male side &
another on Female side. On each side, E/S of all three poles are
mechanically ganged with one common motor operating mechanism.
The earthing switches should be of non-ferrous materials especially
of the same material as that of main switch assembly and able to carry
the same fault current as assigned to the main disconnector and
withstand the dynamic stresses.
If corona extinction voltage is to be achieved with the help of corona

ring or any other similar device, the same shall be deemed to be
included in the scope of the Supplier.
For each set of Isolator, two sets of clamp connector i.e. one set of
clamp connector suitable for 4 inch bus bar & onset of clamp connector
suitable for twin moose shall be deemed to be included in the scope of
the supplier.
(B) The 220,132 & 33 KV Isolators shall be outdoor type with three phase
double break centre rotating type [ Single(SI) / Double(DI) ] Isolators
suitable for electrical as well as manual operation and local/remote
operation. They shall have crank and reduction gear mechanism. Isolator
rated for above 72.5 kV shall be of extended mechanical endurance class -
Page 57 of 76
M2 as per IEC-62271-102. Isolator rated for 72.5 kV and below shall be of
extended mechanical endurance class - M1 as per IEC-62271-102. All earth
switches shall be of M0 duty. All Isolators offered shall be suitable for
horizontal upright mounting on steel structures. Each pole unit of the
multiple Isolators shall be of identical construction and mechanically linked
for gang operation.
Outdoor type 220KV /132KV /33KV, 3 phase triple pole double break
gang operated centre rotating type (Single / Double) Isolator with / without
earth switches, with electrical inter lock, insulators and complete in all
respect with bimetallic / aluminium connectors arcing horns operating
mechanism, auxiliary switches, indicating devices, fixing detail etc. as
described herein after.
Each pole of the Isolator shall be provided with two sets of contacts to
be operated in series and the moving contact blades shall rotate in
horizontal plane.
The design shall be such that the operating mechanism with the linkages
shall be suitable for mounting on any of the outer pole ends without much
difficulty and with minimum shifting of parts.
Moving contacts of all isolators shall rotate through 90 deg from their “fully
closed position” to “fully open position so that the break is distinct and
clearly visible from ground level.
The Isolators offered by the Bidder shall be designed for Normal rating
current for Isolator
400kV 420KV 220 kV 132kV 33kV
2000A 3150A 2000A 2000A 2000A
It should suitable for continuous service at the system voltages

specified herein. The Isolators shall be suitable to carry the rated current
continuously and full short circuit current of 63/40/31.5/25 KA for
400/220/132/33 KV respectively for 3 second at site condition without any
appreciable rise in temperature. These shall also be suitable for operation at
Page 58 of 76
110% rated (normal) voltage. The Isolators shall be suitable for Isolating low
capacitive / inductive currents of 0.7amp at 0.15 power factor. The isolators
shall be so constructed that they don’t open under the influence of short
circuit conditions.
The Isolators and earthing switches are required to be used on
electrically exposed installation and this should be taken into account while
fixing the clearance between phases and between phase and earth.
2. STANDARDS
Disconnecting switches covered by this specification shall conform to
latest edition IEC- 62271-102 and unless specifically stated otherwise in
this specification.
1. MAIN CONTACTS
All Isolators shall have heavy duty, self-aligning and high pressure
line type contacts made of high conductivity, corrosion resistant, hard-
drawn electrolytic copper strips of proper thickness and contact area.
Contacts should consist of loops of above copper strips suitable for 2000
Amps ratings. The hard dawn electrolytic copper strips should be silver
plated 25 micron thickness and fixed contacts should be backed by powerful
phosphor bronze/stainless steel springs of suitable numbers. However, the
thickness and contact area of the contact should conform to the drawing
approved during type test. Moving contact with moving arm should be of
hard-drawn electrolytic copper of proper thickness and contact area.
These fixed and moving contacts shall be able to carry the rated current
continuously and the maximum fault current of 63/40/31.5/25 KA for
400/200/132/33KV respectively for 3 seconds without any appreciable rise
in temperature. The Isolator blades shall retain their form and straightness
under all conditions of operation including all mechanical stress arising out
of operation as well as under rated short circuit condition.
Fixed guides shall be provided so that even when the blades are out of
alignment by one inch (maximum), closing of the switches, proper seating of
the blades in between contacts and adequate pressure to give enough
contact surface is ensured. Wherever possible, the blades shall be counter
balanced by weights and springs. The contact shall be self cleaning by the
Page 59 of 76
wiping action created by the movements of the blades. The surface of the
contacts shall be Bided smooth and silver plated (25 micron).
The Isolator shall be self-cleaning type so that when isolators remain
closed for long periods in a heavily polluted atmosphere, binding does not
occur. No undue wear or scuffing shall be evident during the mechanical
endurance tests, contacts and springs shall be designed so that adjustment
of contact pressure shall not be necessary throughout the life of the isolator.
Each contact or part of contacts shall be independently sprung so that full
pressure is maintained on all contact at all times.
2. ARCING HORN AND GRADING HORN
Suitable arcing horn made of tinned electrolytic copper which are
required for guiding contacts shall be provided on the fixed and moving
contacts of all Isolators. The contacts shall be of ‘make before and break
after” type.
3. ELECTRICAL INTERLOCK / MECHANICAL INTERLOCK
The disconnecting switches whenever required shall be with an approved
type electrical interlock for interlocking with the associated circuit breakers
and earth switch. Electrical interlock assembly should be more right in
construction and properly mounted to ensure reliable operation. The design
should be such that the electrical circuit for the interlocking mechanism will
only remain energised during operation of the switches.
4. AUXILIARY SWITCHES
All isolators and earthing switches shall be provided with 220V DC auxiliary
switches for their remote position indication on the control board and for
electrical locking with other equipment. The auxiliary switch shall be
provided with a minimum of ten auxiliary contacts-10 normally open and 10
normally closed and 10 normally open and 10 normally closed for earth
switch. Separate auxiliary switches shall be provided for isolating and earth
switches. 6 additional NO and NC contact to be provided as spare in each
case.
The auxiliary switches and auxiliary circuits shall have a continuous
current carrying capacity of at least 10 Amps. Auxiliary switches shall not
Page 60 of 76
be used as limit switches. Details of make, rating and type of limit switch
shall be furnished in the offer.
5. EARTH SWITCH
Line earth switch shall consist of three earthing blades for Isolator which
normally rest against the frame when the connected Isolator is in closed
position. The earthing blades for three phase shall be mechanically linked to
a coupling shaft which shall be capable of being fitted on either side of the
Isolator. The earthing blades shall match and be similar to the main switch
blades and shall be provided at the hinge; with suitable flexible conductors
at all moving points with terminal lugs to maintain a continuous path to the
station ground bus. The earthing blades shall be operated by a separate
mechanism but shall be mechanically interlocked with the main switch so
that the earthing blades can be closed only when the main switches are in
open position and vice-versa. The earthing blades shall be gang operated
and all the three blades will operate simultaneously. 245 kV earth switches
shall also comply with the requirements of IEC-62271-102, in respect of
induced current switching duty as defined for Class-B and short circuit
making capability class E-0 for earthing switches.
6. OPERATING MACHANISM
The operating mechanism shall be simple and shall ensure quick and
effective 1000 operation. The design shall be such as to enable one man to
operate it with nominal effort. The operating mechanism box shall be made
out of aluminum extruded (Aluminum alloy) sections of minimum 3.0 mm
thickness. The operating mechanism shall be strong rigid and not subject to
rebound.
The Isolator blades shall be in positive continuous control throughout the
entire cycles of operation. The operating rods and pipes shall be rigid
enough to maintain positive control under most adverse conditions and to
withstand all torsional and bending stresses arising from operation.
Operation of the switches at any speed should not result in improper
functioning, in displacement of parts / machines after final adjustment has
been made. All holes in cranks, linkages etc. having moving pins shall be
drilled and fitted accurately so as to prevent slackness and lost motion.
Page 61 of 76
Provision shall be made for padlocking the operating mechanism of
disconnecting and earth switches in both open and closed positions.
Bearings shall be ball and roller type shall be protected from weather and
dust by means of cover and grease retainers. Bearings pressures shall be
kept low to ensure long life and care of operation.
Each power operated isolator shall be motor driven as well as manually
operated and shall be complete with local / remote selector switch and open
/ close push buttons. The function of all control facilitates operating
isolators.
Provision shall be made in the control cabinet to disconnect power supply to
prevent local / remote power operation. Limit switches for open and close
positions of isolators shall be provided.
All the terminal blocks to be used in the operating mechanism should of
stud type of Poly-amide/Mealmine material of make like Elmex (OAT-6 for
non disconnecting type & OAT –6T for disconnecting type) / connectwell (
Equivalent).
7. DESIGN, MATERIALS AND WORKMANSHIP

The live parts shall be designed to eliminate sharp points, edges and similar
corona producing surfaces. Where this is impracticable, adequate shields to
be provided. All ferrous metal parts shall be hot dip galvanized, as per IS
2629.All metal parts shall be of such materials or treated in such a way so
as to avoid rust, corrosion and deterioration due to continued exposure to
atmosphere and rain. All current carrying parts shall be made from high
conductivity electrolytic copper / aluminium.
Bolts, screws and pins shall be provided with standard locking device viz.
Locknuts, spring washers, keys etc. and when used with current carrying
parts, they shall be made of copper silicon or other high conductivity and
wear resistant alloys.
The switches should not need lubrication of any parts except at very long
interval of five year minimum.
8. PROTECTIVE COATINGS
Page 62 of 76
All ferrous parts including bolts, nuts and washers of the switches assembly
shall be galvanised to withstand at least six one minute dips in copper
sulphate solution of requisite strength (Prece tests) except the threaded
portions which should withstand four dips.
9. Insulators – Support insulators for all type of isolators shall be of
solid core type. The insulator shall be made of homogeneous and
vitreous porcelain of high mechanical and dielectric strength. It shall
have sufficient mechanical strength to sustain electrical and
mechanical loading on account of wind load, short circuit forces etc.
Glazing of the porcelains shall be of uniform dark brown colour with a
smooth surface arranged to shed away rain water. The porcelain shall
be free from laminations and other flaws or imperfections that might
affect the mechanical or dielectric quality. It shall be thoroughly
vitrified, tough and impervious to moisture. The porcelain and metal
parts shall be assembled in such a manner and with such material
that any thermal differential expansion between the metal and
porcelain parts throughout the range of temperature specified in this
specification shall not loosen the parts or create under internal
stresses which may affect the mechanical or electrical strength or
rigidity. The assembly shall not have excessive concentration of
electrical stresses in any section or across leakage surfaces. The
cement used shall not give rise to chemical reaction with metal
fittings. The insulator shall be suitable for water washing by rain or
artificial means in service condition. Profile of the insulator shall also
conform to IEC-815. Insulator shall have a minimum cantilever
strength of 800 kgf (for 400Kv, 220 Kv ) & 600 Kgf for (132KV,33 Kv ).
Caps to be provided on top of the insulator shall be of high grade cast
iron or malleable steel casting. It shall be machine faced and hot dip
galvanized. The cap shall have four numbers of tapped holes spaced
on a pitch circle diameter of 127mm. The holes shall be suitable for
bolts with threads having anti corrosive protection. The effective depth
of threads shall not be less than the nominal diameter of the bolt. The
cap shall be so designed that it shall be free from visible corona and
Page 63 of 76
shall have radio interference level within 500 micro volts for 220 Kv &
132 Kv .Casing shall be free from blow holes cracks and such other
defects
If corona extinction voltage is to be achieved with the help of
corona ring or any other similar device, the same shall be deemed to
be included in the scope of the Supplier
10. Control Cabinet: The control cabinet of the operating mechanism
shall be made out of minimum 3mm thick aluminium alloy sheet.
Hinged door shall be provided with pad locking arrangement. Flexible
earthing strips to be provided for moving shaft connecting to the
isolator with cabinet body as well as the hinged door with main body.
Sloping rain hood shall be provided to cover all sides. 15 mm thick
neoprene or better type of gaskets shall be provided to ensure degree
of protections of at least IP 55 as per IS 2147/IS-3947. The cabinet
shall be suitable for mounting on support structure with adjustment
for vertical, horizontal and longitudinal alignment. Details of these
arrangements shall be furnished alongwith the offer.
11. Motor : Motors rated 1 Kw and above shall be suitable for operation
on 3 phase, 415 V, 50 HZ supply. Motors of lower rating shall be
single phase type suitable for 240V, 50HZ system. It shall be totally
enclosed type if mounted outside the control cabinet. The motor shall
withstand without damage stalled torque for atleast 3 times the time
lag of tripping device. The motor shall, in all other respects, conform
to the requirement of I.S. 325.
12. Gear: The dis-connector / isolator may be required to operate
occasionally, with considerably long idle intervals. Special care shall
be taken for selection of material for gear and lubrication of gears to
meet this requirement. The gear shall be made out of aluminium
bronze or any other better material lubricated for life with graphite or
better quality non-drawing and non-hardening type grease. Wherever
necessary automatic relieving mechanism shall be provided suitable
relay, Device shall be provided to prevent over loading of the motor.
Single phase preventer (for 3 phase meter) shall be provided to operate
Page 64 of 76
on open circuiting of any phase and shall trip off the motor. Complete
details of the devices shall be furnished in the offer.
13. Space heaters : Space heaters suitable for 1 phase 240V AC supply
shall be provided for each motor operated operating mechanism to
prevent condensation and shall be operated by MCB.
14. Terminal block and Wirings – Each operating mechanism shall be
provided with 1100V grade stud type terminal block. All auxiliary
switches, interlocks and other terminals shall be wired upto terminal
block. The terminal block shall have at least 20% extra terminals. All
wiring shall be carried out with 1.1KV grade insulated 2.5 sq mm
copper wires.
15. Interior Illumination : A holder suitable for a 240 V lamp shall be
provided in each of the motor operated mechanism of three poles &
shall be door operated type.
16. Control and auxiliary supply – A 3 phase switch with MCB for phases
and link for neutral, shall be provided for power supply and a 2 pole
MCB shall be provided for control supply.
17. Position indicator : A position indicator to show the isolator is in ON
or OFF position to be provided.
18. Name plate : Isolator, earthing switches and their operating devices
shall be provided with name plate. The name plate shall be weather
proof and corrosion proof. It shall be mounted in such a position that
it shall be visible in the position of normal service and installation. It
shall carry the following informations duly engraved or punched on it.
A. Isolator Base
Name : OPTCL
Name of manufacturer –
Order No. –
Type Designation –
Manufacturers serial No. –
(Confirming to IS)
Rated voltage –
Page 65 of 76
Rated normal current –
Rated short time current (rms) and duration –
Rated short time peak current (KAP)
Weight
B. B. Earthing Switch
Name : OPTCL
Order No. –
Manufacturers serial No. –
(Confirming to IS)
Rated voltage –
Rated normal current –
Rated short time current (rms) and duration
Rated short time peak current (KAP)
Weight
C. Operating Device
Name – OPTCL
Order No.
Reduction gear ratio –
AC motor
i) Rated auxiliary voltage
ii) Starting current
iii) Designation of AC motor as per I.S 4722/325
iv) Starting torque at 80% of supply voltage
v) Over travel in degrees after cutting off supply
Total operating time in seconds
i) Close operation – Electrical
ii) Open operation – electrical
Open operation – manual
19. Painting Galvanizing and Climate Proofing
Page 66 of 76
At interiors and exteriors of enclosures, cabinets and other metal
parts (other than made up of aluminium) shall be thoroughly cleaned to
remove all rust, scales, corrosion, grease and other adhering foreign matter
and the surfaces treated by phosphating (e.g. seven tank phospating
sequence). After such preparation of surfaces, two coats of zinc oxide
primer shall be given by suitable stoving and air drying before final painting.
Colour of the final paints shall be of shade no. 697 of IS:5. The finally
painted cubicle shall present aesthetically pleasing appearance free from
any dent or uneven surface.
Paint inside the metallic housing shall be of anti condensation type and the
paint on outside surfaces shall be suitable for outdoor installation.
All components shall be given adequate treatment of climate proofing as per

IS:3202 so as to withstand corrosive and severe service conditions.
All metal parts not suitable for painting such as structural steel, pipes, rods
,levers, linkages, nuts and bolts used in other than current path etc. shall
be hot dip gaivanised as per IS –2629. Galvanisation test will be carried out
during routine test.
Complete details of painting, galvanising and climate proofing of the
equipment shall be furnished in the offer.
24. TESTS
Type Tests
Isolators offered, shall be fully type tested as per the relevant standards. The
Bidder shall furnish Three sets of the following valid type test reports for
their different type of offered Isolators along with the offer. The Purchaser
reserves the right to demand repetition of some or all the type tests in the
presence of purchaser’s representative. For this purpose the Bidder may
quote unit rates for carrying out each type test and this will be taken during
bid price evaluation ,if required.
a) Short time withstand & peak withstand current test for Isolator & Earth
Switch.
b) Power frequency (Dry & Wet),Lightening Impulse dry withstand Test
Page 67 of 76
c) Mechanical endurance Test ( M2 class).
d) IP-55 test.
e) Temperature rise.
f) Seismic withstand test.
g) Induced current test (Class-B)as per IEC 62271-102. (For 220 KV class
Isolators).
h) RIV test. (132 KV & above).
During type tests the isolator shall be mounted on its own support structure
or equivalent support structure and installed with its own operating
mechanism to make the type tests representative. Drawing of equivalent
support structure and mounting arrangements shall be furnished for
Purchaser’s approval before conducting the type tests.
The type tests shall be conducted on the isolator along with approved
insulators and terminal connectors.
Mechanical endurance test shall be conducted on the main switch as well as
earth switch of one isolator of each type.
Acceptance and Routine Test :
All acceptance and routine test as stipulated in the relevant standards shall
be carried out by the supplier in presence of Purchaser’s representative.
Mechanical operation test (routine test) shall be conducted on isolator (main
switch and earth switch) at the supplier’s works as well as purchaser’s
substation site.
Immediately after finalisation of the programme of type / acceptance,
routine testing the supplier shall give sufficient advance intimation (clear 20
days advance intimation), along with shop routine test certificates, valid
calibration reports from Govt. approved test house for the equipments,
instruments to be used during testing for scrutiny by the purchaser to
enable him to depute his representative for witnessing the tests. If there will
be any discrepancies in the shop routine test certificates and calibration
reports furnished by the firm then after settlement of the discrepancies only,
purchaser’s representative will be deputed for witnessing the tests.
Special tests proposed to be conducted (if decided to conduct ) as type test
on isolators, are given at Annexure- II. These special type test charges shall
Page 68 of 76
be quoted alongwith all other type tests as per relevant IEC standard and
these charges shall be included in the total bid price.
Test certificates of various items including but not limited to the following
shall be furnished at the time of routine tests.
a) Chemical analysis of copper alongwith a copy of excise certificate
indicating genuine source of procurement of electrolytic grade
copper.
b) Bearings
c) Fasteners
d) Universal / swivel joint coupling
e) Insulators
f) Motor
g) Gears
h) Auxillary switch
i) Limit switch
j) Timer
k) Overload / single phase preventer relay
l) Interlocking devices
m) Terminal block
n) Any other item
25. INSPECTION
i) The Purchaser shall have access at all times to the works and
all other places of manufacture, where the disconnectors, earth switches
and associated equipment are being manufactured and the supplier shall
provide all facilities for unrestricted inspection of the works raw materials
manufacture of all the accessories and for conducting necessary tests as
detailed herein.
ii) The supplier shall keep the purchaser informed in advance of the
time of starting of the progress of manufacture of equipment in its
various stages so that arrangements could be made for inspection.
iii) No material shall be dispatched from its point of manufacture
unless the material has been satisfactorily inspected and tested.
Page 69 of 76
iv) The acceptance of any quantity of the equipment shall in no way
relieve the supplier of his responsibility for meeting all the
requirements of this specification and shall not prevent subsequent
rejection if such equipment are later found to be defective.
26 QUALITY ASSURANCE PLAN
The Bidder shall invariably furnish following information alongwith
his offer, failing which his offer shall be liable for rejection.
(i) Names of sub suppliers for raw materials, list of standards
according to which the raw materials are tested, list of tests
normally carried out on raw materials in presence of Supplier’s
representative, copies of test certificate
(ii) Information and copies of test certificates as in (I) and (ii) above in
respect of bought out accessories.
(iii) List of manufacturing facilities available
(iv) Level of automation achieved and lists of areas where manual
processing still exists.
(v) List of areas in manufacturing process, where stage inspections are
normally carried out for quality control and details of such tests
and inspections.
List of testing equipments with calibration certificates from Govt. approved

test house available with supplier for final testing equipment and test plant
limitation if any, vis-à-vis the type, special acceptance routine test specified
in the relevant standards. These limitations shall be very clearly brought out
in the specified test requirements.
The supplier shall within 30 days of placement of order, submit following
information to the purchaser.
i) List of raw material as well as bought out accessories and the
names of sub-suppliers selected from the lists furnished alongwith
offer.
ii) Type test certificates of the raw material and both bought out
accessories.
Page 70 of 76
iii) Quality Assurance Plan (QAP) with hold points for purchaser’s
inspection.
The supplier shall submit the routine test certificates of bought out
accessories and raw material viz. Copper, aluminium conductors,
lubricating material, gear material etc. at the time of routine testing of the
fully assembled isolator.
27. DOCUMENTATION
All drawings shall conform to relevant international standards organisation
(ISO). All drawings shall be in ink and suitable for micro filming. All
dimensions and data shall be in S.I. Units.
List of Drawings and Documents
The Bidder shall furnish four sets of following drawings / documents
along with his offer.
a) General outline and assembly drawings of the dis-connector
operating mechanism, structure, insulator and terminal connector.
b) Sectional views and descriptive details of items such as moving
blades, contacts, arms contact pressure, contact support bearing
housing of bearings, balancing of heights, phase coupling pipes,
base plate, operating shaft, guides, swivel joint operating
mechanism and its components etc.
c) Loading diagram
d) Drawings with structure for the purpose of type tests.
e) Name plate.
f) Schematic drawing.
g) Type test reports.
h) Test reports, literature, pamphlets of the bought out items and raw
material.
The supplier shall within 2 weeks of placement of order submit four sets of
final versions of all the above said drawings for Purchaser’s approval. The
purchaser shall communicate his comments / approval on the drawings to
the supplier. The supplier shall, if necessary, modify the drawings and
resubmit four copies of the modified drawings for Purchaser’s approval
within two weeks from the date of comments. After receipt of approval the
Page 71 of 76
supplier shall within three weeks submit 15 prints and two good quality re-
producibles of the approved drawings for purchaser’s use.
Six sets of the type test reports, duly approved by the Purchaser shall be
submitted by the supplier for distribution, before commencement of supply
Adequate copies of acceptance and routine test certificates, duly approved
by the Purchaser shall acompany the despatched consignment.
The manufacturing of the equipment shall be strictly in accordance with the
approved drawings and no deviation shall be permitted without the written
approval of the purchaser. All manufacturing and fabrication work in
connection with the equipment prior to the approval of the drawing shall be
at the supplier risk.
28. INSTRUCTION MANUALS :
Fifteen copies of the erection, operation and maintenance manuals in
English be supplied for each type of disconnector one month prior to
despatch of the equipment. The manual shall be bound volumes and shall
contain all drawings and information required for erection, operation and
maintenance of the disconnector including but not limited to the following
particulars.
(a) Marked erection prints identifying the component parts of the
disconnector as shipped with assembly drawings.
(b) Detailed dimensions and description of all auxiliaries.
(c) Detailed views of the insulator stacks, metallics, operating
mechanism, structure, interlocks, spare parts etc.
29. PACKING AND FORWARDING.
The equipment shall be packed in crates suitable for vertical / horizontal
transport, as the case may be and suitable to withstand handling during
transport and outdoor storage during transit. The supplier shall be
responsible for any damage to the equipment during transit, due to
improper and inadequate packing. The easily damageable material shall be
carefully packed and marked with the appropriate caution symbols.
Wherever necessary, proper arrangement for lifting, such as lifting hooks
Page 72 of 76
etc. shall be provided. Any material found short inside the packing cases
shall be supplied by supplier without any extra cost.
Each consignment shall be accompanied by a detailed packing list
containing the following information :
(a) Name of the consignee.
(b) Details of consignment.
(c) Destination.
(d) Total weight of consignment.
(e) Handling and unpacking instructions.
(f) Bill of material indicating contents of each package.
The supplier shall ensure that the bill of material is approved by the
purchaser before despatch.
30. SUPERVISION OF ERECTION TESTING AND COMMISSIONING

(ET & C)
Purchaser proposes to utilize the services of the supplier for
supervision of testing and commissioning of the equipment being supplied
by him, if it is required. For this purpose, the supplier should make
available the services of trained personnel (Engineers) who shall correct in
the field, any errors or omissions in order to make the equipment and
material properly perform in accordance with the intent of this specification.
The Engineer shall also instruct the plant operators in the operation and
maintenance of the commissioned equipment. The supplier shall be
responsible for any damage to the equipment on commissioning the same, if
such damage results for the faulty or improper ET&C. Purchaser shall
provide adequate number of skilled / semi skilled workers as well as
ordinary tools and equipment and cranes required for equipment errection,
at his own expenses. Apart from the above, the Purchaser shall not be
responsible for providing any other facilties to the supplier. Special tools if
required for erection and commissioning shall be arranged by the supplier at
his cost and on commissioning these shall be supplied to the purchaser free
of cost for future use.
APPENDIX – I(Isolators)
Page 73 of 76
LIST OF SPECIAL TESTS TO BE CARRIED OUT IF DECIDED BY THE
PURCHASER
Sl. No. Name of the Test Standard to which it conforms.

1. Test for visible Corona and Radio NEMA Pub No. 107-1964 ISRI
interference voltage (RIV) on
Pub No. 1-1972
disconnectors and teminal connector.
2. Tests on insulators IS-2544 IEC. 168
3. Tests on terminal connectors IS:5561
4. Tests on galvanised components IS:2633
5. Stalled torque test on motor At 110% of supply voltage

operating mechanism
Quantity & Delivery Schedule APPENDIX-II
L Destination Delivery in
Sl. 201 2019-
o ITEM DESCRIPTION
No. 8-19 20 months
t.
400 KV HCB - with Double
I i 3
E/S,2000A
i 132KV SI W/O E/S,2000A. 0
132 KV Double Isolator
ii 0
with E/S,2000A.
Motor operating mechanism
II box for 132 KV Isolator with
aluminium enclosure,10 NO +
iii 10 NC auxiliary contact with 100 Any store/site Within 4 (four)
three phase AC motor with
retrofitting as per OPTCL of OPTCL Months from
specification. within the state the date of the
i 33KV SI W/O E/S,2000A 5 of ODISHA as issue of the
33 KV Double Isolator per despatch Purchase
ii 0
W/O E/S,2000A clearance Order.
33 kV Beam Mounted
iii 6
isolator, 2000A
II Motor operating mechanism
I box for 33 KV Isolator with
aluminium enclosure,10 NO +
iv 10 NC auxiliary contact with 150
three phase AC motor with
retrofitting as per OPTCL
specification.
Page 74 of 76
L Destination Delivery in
Sl. 2018-
o ITEM DESCRIPTION 2019-20
No. 19 months
t.
400 KV HCB - with
I i Double 3
E/S,2000A
132KV SI W/O
i 6
E/S,2000A.
ii 7
with E/S,2000A.
Motor operating
mechanism box for 132
II KV Isolator with
aluminium enclosure,10 Any
iii NO + 10 NC auxiliary 100
store/site of
contact with three phase Within 4
AC motor with retrofitting OPTCL
(four)
as per OPTCL within the
Months
specification. state of
from
i 33KV SI W/O E/S,2000A 6 ODISHA as
01/04/2019
per despatch
ii 5 clearance
W/O E/S,2000A
33 kV Beam Mounted
iii 6
isolator, 2000A
II Motor operating
I mechanism box for 33 KV
Isolator with aluminium
enclosure,10 NO + 10 NC
iv 150
auxiliary contact with
three phase AC motor
with retrofitting as per
OPTCL specification.
420 KV, 63 KA
3.0 Sec,3150A,
Tripple pole HCB
Isolator with 1
i motor operated 10 0 10
E/S, along with
support
insulators (CD Meramunduli “B”
1302mm) Within 4 (four)
OPTCL within the
I Terminal Months from the
V connector for 420 state of ODISHA
issue of purchase
KV Isolator to 54 as per despatch
ii 54 0 order
receive quad clearance
moose ACSR
conductor.
Terminal
connector for 420
receive 4.5" Al
tube.
Page 75 of 76
N.B: The detail delivery programme & quantity to be delivered will be
informed at the time of placing P.O / issue of release order.
Page 76 of 76

Optcl

Uploaded by

Copyright:

Available Formats

Optcl

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Optcl

Uploaded by

Copyright:

Available Formats

ODISHA POWER TRANSMISSION CORPORATION LTD

OFFICE OFTHE CHIEF GENERAL MANAGER,

SALE OF TENDER PAPER FROM 01/11/2018 AT 10 AM TO 04/12/2018 UPTO 12-30 PM.

LAST DATE OF SUBMISSION OF TENDER PAPER- 04/12/2018 UP TO 01 PM.

DATE OF OPENING OF TENDER PAPER- 04/12/2018 AT 03-00 PM.

CHIEF GENERAL MANAGER [C.P.C.]

CHIEF GENERAL MANAGER, CPC

ODISHA POWER TRANSMISSION CORPORATION LTD.

CENTRAL PROCUREMENT CELL

FAX NO.:0674 – 2542964

TELEPHONE NO.:0674 – 2541801

JANAPATH, BHUBANESWAR – 751022

TENDER SPECIFICATION NO.Sr.G.M.-CPC –TENDER-C.B-25 / 2018-19

SECTION – I : INSTRUCTION TO TENDERERS

SECTION – II :GENERAL TERMS AND CONDITIONS OF

SECTION – III : LIST OF ANNEXURES (COMMERCIAL)

PART – II PRICE BID.

[i] Section-I Instruction to Tenderers.

[iv] Section-IV Technical Specification.

7. Bidder’s Liberty to deviate from Specification.

8. Eligibility for submission of bids.

9. Purchaser’s right to accept/reject bids:

10. Mode of submission of Tenders.

11. Supplier to inform himself fully:

30. Minimum Qualification Criteria of Bidders.

35. Documents to be treated as confidential.

The Chief. General Manager (CPC)

* (Strikeout whichever is not applicable).

(To be filled up by the tenderer as indicated in the excel sheet)

(To be filled up by the tenderer as indicated in the excel sheet)

3. Conditional offers will not be acceptable.

Ref Date Bank Guarantee No:

1 In accordance with invitation to Bid No. Dated of ODISHA

POWER TRANSMISSION CORPORATION LTD. [OPTCL][herein after referred to

as the OPTCL for the purchase of

by the Tenderer. We the

[Indicate the Name

[Hereinafter referred to as ‘the Bank’] at the request of M/S

[Herein after referred to as supplier (s)] do hereby unequivocally and unconditionally

Chief General Manager [Procurement] ODISHA POWER TRANSMISSION

an amount not exceeding Rs._________________to the OPTCL, without any

reservation. The guarantee would remain valid up to ___________________

receiving instructions from the_______________________________________ on

behalf this guarantee has been issued.

2. We the _____________________________________do hereby, further undertake

or damage caused to or would be caused to or suffered by the OPTCL by reason of

liability under this guarantee shall be restricted to an amount not exceeding

claims satisfied or discharged or till Managing Director, ODISHA POWER

TRANSMISSION CORPORATION LTD. certifies that the terms and conditions of

is made on us in writing on or before the _________________

we shall be discharged from all liability under this guarantee thereafter.

5. We, the _______________________________further agree with the OPTCL that

[Indicate the name of the Bank]

conditions relating to the said bid

8. We the _________________________________ Bank further agree that this

guarantee shall also be invokable at our place of business at -------------- Branch of

Bhubaneswar ( indicate the name of the branch)in the state of ODISHA.

Notwithstanding anything contained herein.

[Indicate the name of Bank]

Dated Day of _