Es LF919 PDF
Es LF919 PDF
ES-LF919
For Health Hazard Applications
Job Name Job Location Engineer Approval Contractor Approval Contractors P.O. No. Representative
LEAD FREE* Series LF919
Reduced Pressure Zone Assemblies
Sizes: 34" 2" (15 50mm)
Series LF919 Reduced Pressure Zone Backflow Assemblies are designed to protect potable water supplies in accordance with national plumbing codes and water authority requirements. This series can be used in a variety of installations, including the prevention of health hazard cross-connections or for containment at the service line entrance. This series features two poppet style check valves, replaceable check seats, with an intermediate relief valve. Its compact modular design facilitates easy maintenance and assembly access. Sizes 34" 1" (5 25mm) shutoffs have tee handles. The LF919 features Lead Free* construction to comply with Lead Free* installation requirements.
LF919QT 34" (20mm)
Specifications
A Reduced Pressure Zone Assembly shall be installed at each potential health hazard location to prevent backflow due to backsiphonage and/or backpressure. The assembly shall consist of a pressure differential relief valve located in a zone between two positive seating check valves. Seats and seat discs shall be replaceable in both check valves and the relief valve without the use of special tools. Service of all internal check valve components shall be through top mounted access covers threaded to the main valve body. The check valve poppet assembly shall be guided via the use of a corrosion resistant plastic guide. The check valve and relief valve seats shall be push-in type. The relief valve cover shall be secured with stainless steel bolts and shall utilize a quarter-turn locking joint to capture the spring load of the relief valve. The relief valve shall have an internal sensing line to sense the inlet water supply. All rubber elastomers shall be of chloramine resistant material. The assembly shall also include two resilient seated isolation valves, four top-mounted resilient seated test cocks and an air gap drain fitting. The Lead Free* Reduced Pressure Zone Assembly shall comply with state codes and standards, where applicable, requiring reduced lead content. The assembly shall be a Watts Series LF919.
Features
Separate access covers for the check valves and relief valve for ease of maintenance Top entry-all check internals easily accessible All rubber elastomers of chloramine resistant material Check valve poppet assemblies are fully guided by innovative plastic seat guide Replaceable push-in check valve and relief valve seats eliminates threads from the water way EZ twist relief valve cover quarter-turn locking joint captures the spring load during repair to facilitate disassembly Innovative check valve plastic cover bushing provides trouble free guiding of the check valve poppet Bottom mounted relief valve provides reduced installation clearances Compact, space saving design No special tools required for servicing Top mounted test cocks for ease in testing and reduced installation clearances Standardly furnished with NPT body connections
For more information, send for literature ES-WB.
IMPORTANT: INQUIRE WITH GOVERNING AUTHORITIES FOR LOCAL INSTALLATION REQUIREMENTS
WattsBox Insulated Enclosures.
Now Available
*The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight.
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
Available Models
Suffix: QT quarter-turn ball valves S bronze strainer LF without shutoff valves
Pressure Temperature
Temperature Range: 33F 180F (0.5C 82C) Maximum Working Pressure: 175psi (12.1 bar)
Materials
Body: Lead Free* Bronze Discs: Silicone rubber Check Seats: Replaceable polymer Cover Bolts: Stainless steel
Air Gaps
A
Approvals
1013
Approved by the Foundation for Cross-Connection Control and Research at The University of Southern California.
AIR GAP MODEL
C
SIZES DIMENSIONS WEIGHT A B C in. mm in. mm in. mm lbs. kg.
14" 1" 238 60 318 79 12 13 .63 .28 919AGC 919AGF 114" 2" 438 111 8716 214 3 76 4.26 1.93
Dimensions Weights
D A
G F
LF919QT
Size (dn) dimensions strainer dimensions weight A B C D E (LF) F G H M N LF919QT in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs.
/ 20 121/8 307 77/16 188 31/2 88 151/2 393 1 25 141/2 368 8 202 37/8 98 193/16 487 11/4 32 181/8 461 117/16 290 51/8 129 231/4 591 11/2 40 183/4 476 117/16 290 51/8 129 251/16 637 2 50 211/16 535 121/16 307 55/8 142 2813/16 732
3 4
711/16 195 35/8 92 21/16 52 93/16 233 4 102 27/16 62 1111/16 297 51/8 130 25/8 67 1111/16 297 55/8 143 31/8 79 133/8 340 515/16 151 37/16 87
19/16 40 15/8 41 33/16 81 8.3 3.7 19/16 40 21/8 54 33/4 95 11.8 5.4 21/2 64 21/2 64 47/16 113 22.3 10.1 21/2 64 3 76 47/8 124 28.3 12.8 21/2 64 39/16 90 515/16 151 37.3 16.9
Capacities
kPa psi 207 30
34
" (20mm)
Pressure Loss
kPa psi 138 20 103 15 69 10 34 5 0 0
112" (40mm)
Pressure Loss
172 25 138 20 103 15 69 10 34 5 0 0 10 38 20 76
0 0
Flow Rate
30 114
40 152
50 gpm 190 lpm
0 20 40 60 80 100 120 gpm 0 76 152 228 304 380 456 lpm
Flow Rate
kPa psi 172 25 138 20
1" (25mm)
kPa psi 138 20 103 15 69 10 34 5 0 0
2" (50mm)
Pressure Loss
69 10 34 5 0 0 0 38 76 114 152 190 228 lpm
0 10 20 30 40 50 60 gpm
Pressure Loss
103 15
Flow Rate
kPa psi 172 25
0 0
50 190
114" (32mm)
Flow Rate
100 380
150 570
200 gpm 760 lpm
Pressure Loss
138 20 103 15 69 10 34 5 0 0 0 10 20 30 40 50 60 70 80 gpm 0 38 76 114 152 190 228 266 304 lpm
Flow Rate
A Watts Water Technologies Company
USA: Tel: (978) 688-1811 Fax: (978) 794-1848 www.watts.com Canada: Tel: (905) 332-4090 Fax: (905) 332-7068 www.watts.ca 2012 Watts
ES-LF919 1250
