ECC := CFM1 := Create Integration model -> execute ->

then select the line - > Generate IM

Once you execute transaction in CFM1 , move to CFM2
choose the line created by CFM1 and then activate line
then Click on START

CFM1 Is not Available In S4Hana.

///////////////////////////////////////////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////

ECC := If you are using in custom field in the material

master data and you don’t to transfer it to EWM , then you
have to activate BADI in SPRO
SPRO -> Integration with other SAP Comp - > EWM -> Basic
Setting for data transfer - > Enhancement for material
Selection - > Activate This BADI.

///////////////////////////////////////////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////

Example : some data come from ECC or any System , you

need to activate the below and add system name
EWM := SPRO - > SCM Extended Warehouse Number - >
SCM Basis - > Integration - > Basic Setting for creating
system landscape - > Activated Incremental Data Transfer

///////////////////////////////////////////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////

EWM := Business System Group .

EWM Can Connect To SAP ERP And Non-SAP , So Using

Business System Group We Tell The System What Is SAP
Connect And What is Not System Connection.

So , we create Business System Group For Each System

And Connect It To Logical system.

EWM Logical System := SPRO - > SCM Extended

Warehouse Number - > SCM Basis - > Integration - > Basic
Setting for creating system landscape - > Name Logical
System.

EWM Business System Group := SPRO - > SCM Extended

Warehouse Number - > SCM Basis - > Integration - > Basic
Setting for creating system landscape - > Maintain
Business System Group .

///////////////////////////////////////////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////

And what if we have same material code in the both

systems , using Business System Group

///////////////////////////////////////////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////
Tables :=

/SCDL/*
/SCWM/*
/SCAPO/*

//////////////////////////////////////////////////////////////////////////////// ECC - EWM

Connection///////////////////////////////////////////////////////////////

Wir haben zwei System ECC-800 & EWM-400 , ob wir

möchten Verbindung zwischen diesem system machen ,
wir müssen Logical-System erstellen fur jeden system ,
Und dann wir können ein Verbindung zwischen diesem
Logical-System machen
0 - ECC - > Activate Business Function (t-code SFW5) - >
Enterprise Business Function - > Log_Le_Intergration.

wenn Wir möchten SAP ECC Mit einem EWM Verbindung ,

wir sollen diese function aktivieren

2 - BC Sets : Business Configuration Sets

Beispiel :

3 - EWM - > SCPR20 :=

Bespiel:
Es ist gerade ein program dass wir können werdenden es
wenn wir wollen ein Org Struktur erstellen.
BC Is Just Predefined Program That Can Be Used To
Create Org Structure Simply.

4 - ECC Logical-System Defienieren :

- ECC- > SPRO - > Integration With Other SAP Component -
> EWM - > Basic Setting for setting up the system
landscape - > Name Logical System.
- erstellen Logical-System fur ECC-800 und ander Logical-
System fur EWM-400.

5 - ECC zuordnen Logical-System Mit SAP Client :

- ECC- > SPRO - > Integration With Other SAP Component -
> EWM - > Basic Setting for setting up the system
landscape - > Assign Logical System To client.
- hier wir müssen Logical-System mit SAP Client
zuordnen .
- ECATT - Used To Data Upload & Extended Computer

6 - ECC - SM59 :=
- Heir Wir definieren der target Logical-System ( zum
Beispiel := welche Logical-System wird DATA bekommen
von welche Logical-System) .

7 - EWM - Logical-System Defenieren :=

- EWM - SPRO - > SCM EWM - > Integration - > Basic Setting
for Creating System Landscape - > Name Logical-System.

8 - EWM Zuordnen Logical-System zu SAP Client :=

- EWM - SPRO - > SCM EWM - > Integration - > Basic Setting
for Creating System Landscape - > Assign Logical System
To a Cleint .

//////////////////////////////////////////////////////////////////////////////// ECC Org

Structure Start///////////////////////////////////////////////////////////////

ECC Structure :

1-Plant

2-Shipping Point := Deal With Delivery

3-SLOC .

4-Warehouse Number -3 Digit := (Number Only , No

Internal Org Structure ) . Used To Link With EWM.

5-Warehouse Setting ( Control The Connection And

Communication Between ).
:= SPRO - > Integration with other SAP Components - >
EWM - > Basic Setting for EWM Linkage -> Configure
Extended WM-Specific Parameters.
Parameter1 Why “Ex. WM” := ERP With EWM (Extended
Warehouse Management) , this will tell ECC To Send
Outside All IBD To External Systems.
Parameter2 “Communication. WM” =
Parameter2 When “Communication. WM” = This Control
When To Send The IBD’s To External Systems.

Against The Destination System , We Have Distribution

Model :=
Check BD64 Distribution Model Which Will Let You See
The List Of BABI’s That Define Your Distribution Model
-Filter on Sender & Receiver to find your Distribution
Model.
-BABI “InboundDelivery .SaveReplica” := Here You Will Find
Your ECC WM Linked To EWM WH Number , Which Means
That EWM WH Number Will Receive IBD From ECC

6-Goods Receipt Point Determination := (To Determin The

Location Automatic When GR)
*SPRO -> Logistics Execution -> Shipping -> Basic Shipping
Functions -> Shipping Point And GR Point Determination ->
Assign GR Point for Inbound Deliveries (Choose The SLOC
You Want To Make It Default GR Point For All Inbound
Deliveries)

7-Default Shipping Point Against SLOC In Sales Orders.

* SPRO -> Logistics Execution -> Shipping -> Basic
Shipping Functions -> Shipping Point And GR Point
Determination -> Set Up Storage-Location Dependent
Shipping Point Determination -> Assign Shipping Point
According To Storage Location (Create record For Shipping
Location + Plant )

* SPRO -> Logistics Execution -> Shipping -> Basic

Shipping Functions -> Shipping Point And GR Point
Determination -> Set Up Storage-Location Dependent
Shipping Point Determination -> Assign Shipping Points.

8-Delivery Split Indicator for WHN ( Example : To Split

Delivery On Two Lines ).
* SPRO -> Logistics Execution -> Shipping -> Deliveries - >
Define Split Criteria for Deliveries - > Delivery Split By WH
Number.
Example : I have two lines in the PO , one will go to EWM
And One will go Normal WM , so we need to do this split.

9-Distribution Model:= (BABI FM With Message Types ) ( To

Issue Deliveries Into EWM )
Example:
( If GR Done On EWM , This Info Should Back to ECC IDB ,
So we should BAPI ).

10-Delivery Type := This Control The Delivery Process , for

example which screen will displayed to the user during the
delivery and also which data are required from the user
during the delivery.
Important Field : Distribution Mode , Delivery Split ,
Automatic Picking

* SPRO -> Logistics Execution -> Shipping - > Deliveries ->

Define Delivery .

11-Assign ECC WH Number To EWM Number :=

* ECC := SPRO -> Integration with other SAP Comp - > EWM
-> Assign Warehouse Number To WH Number Of
Decentralized SCM System.
Note: The EWM Number Is Just Text Here But It Will Be
Checked During Inbound Deliveries .

*EWM := SPRO - > SCM Extended Warehouse Number - >

EWM Management - > Interfaces - > ERP Integration - >
General Settings - >
-Business System := To make Connection Between Two
Systems We Use .
-Business System := Processing The Data In The receiving
System Should Be Done referenced To Business System.
-Business System := Must Be Linked To Logical System.
-Logical System := Used To Send Local Data To Other
System.
*Map Warehouse Numbers From ERP System To EWM :=
Business System & WH No 3-digit & Warehouse EWM.
*Check of ERP-EWM Configuration := Check If Something
Is Missing In the Configuration.
-RFC Destination .
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////

Problem1 Same Plant + Shipping Point: ECC Plant +

Shipping Point = Location in EWM (With Different Location
Type).
What if (Plant + Shipping Point) Is The Same Name In ECC
Systems That Connected To EWM (ECC1 , ECC2) , Here We
Should To Activate Some BADI in EWM To Let EWM
Differentiate Between ( ECC Plant + ECCShipping Point )
By Adding Prefix Before The (Plant + Shipping Point).
Solution:=
EWM := SPRO - > SCM EWM - > SCM Basis - > Integration -
> BADI for Specific Application - > Location And Business
Partner - > BAdI: Inbound Processing For Location - >
Choose Your Scenario And Activate.

Example :=

ECC1 ( Plant_D001 + Shipping_Point_Ship001 ) = EWM

Location Plant_D001_Shipping_Point_Ship001
ECC2 ( Plant_D001 + Shipping_Point_Ship001 ) = EWM
Location Plant_D001_Shipping_Point_Ship001

After Activating ThePrevious BADI , EWM Will Add System

Name Before Location Name
(ECC1_ Plant_D001_Shipping_Point_Ship001)
(ECC2_ Plant_D001_Shipping_Point_Ship001)

///////////////////////////////////////////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////

Problem2 Same Material Code In Different ECC System :

What if (Material) Is The Same Name In ECC Systems That
Connected To EWM (ECC1 , ECC2) , Here We Should To
Activate Some BADI in EWM To Let EWM Differentiate
Between ( Multi System Products Code ) By Adding Prefix
Before The (Product).
Solution:=
EWM := SPRO - > SCM EWM - > SCM Basis - > Integration -
> BADI for Specific Application - > Product - >
BAdI: Inbound Processing For Location- > Choose Your
Scenario And Activate it.

Example :=

ECC1 ( XX01 ) = EWM XX01

ECC2 ( XX01 ) = EWM XX01

After Activating ThePrevious BADI , EWM Will Add System

Name Before Location Name
(ECC1_ XX01)
(ECC2_ XX01)

///////////////////////////////////////////////////////////////////////////////////// EWM Org

Structure Start////////////////////////////////////////////////////////////

EWM Structure : It Can Be Done Manual

(SPRO) , BC Sets (t-code SCPR20) /SCMWM/*

BC Is Just Predefined Program That Can Be Used To

Create Org Structure Simply.

EWM Manual Org Structure := SPRO - > SCM Extended

Warehouse Number - > Extended WM - > Master Data ( All
EWM Org Structure Is Defined Here ).

Structure Example ( EWM ):

1 - WH := HAML ( Car Factory WH )

SPRO - > SCM Extended Warehouse Number - > Extended
WM - > Master Data - > Define WH Number.
SPRO - > SCM Extended Warehouse Number - > Extended
WM - > Master Data - > Define WH Number Control.

2 - Storage Types := Engine / BODY / BULK

- es ist Kontrolle der complete Prozess in der lager .
- jeden lager im EWM ist Storage type aber mit dem
verschieden Rolle ( Work Center ist Storage Type aber mit
dem rolle “Work Center” ) .
- Zum Beispiel , ob ich habe nicht genug räum im mein
lager , was soll ich machen !!!! Ich kann “Staging Area
Group Rolle” werdenden .

SPRO - > SCM Extended Warehouse Number - > Extended

WM - > Master Data - > Define Storage Types.
Note1 : Storage Type Contain availably group which Is
Linked To ( ECC Plant + SLOC + Logical System And EWM
Warehouse Number)
And also availably group is linked to Stock Type
( Unrestricted / Quality / Blocked ).
Note2 : Defining Stock Type := during EWM GR , if we need
to post stock in ECC Blocked Stock , in the Storage type
definition “Goods Movement Control” - > “Non-Dep. Stock
Type” -> choose Blocked Stock “BB”
Note3 : Scrap := in the Storage type definition “Goods
Movement Control” - > “Stock Tye Role” -> choose
Scraping Stock.
Note4 : Capacity Can Defined Also On Storage Type.
Note5 : Split During Put-away := ( Don’t Split / Split
During Put-away / Product Master Data ).
Note6 : Put-away Rules.
Note7 : Storage Section Check ( If We Did Not Activate It
By Choose Value in it , System will Check Storage Type
Search Indictor and Will not check any Storage Section
Search Indication During Put-away ).

What is Put-away Rule ?

2 - Addition To Existing Stock / Empty Bin := this will fill
Purposed Bin then move the remain Bin qty to the next
Bin.
3 - Consolidation Group.
4 - General Storage Area.
5 - Empty Bin := Purposing Next Empty Bin
6 - Transit Warehouse : Staging Area for Door.

3 - Sections := ( Under Engine := BEAR , CABLE ) / ( Under

BODY := BULB , FUSE ) / ( Under BULK := BULK ).
SPRO - > SCM Extended Warehouse Number - > Extended
WM - > Master Data - > Define Storage Sections.

4 - Staging Areas := (HA-GR) / (HA-GI) Its Consider As

Storage Type But Just Change Storage Type Roles
SPRO - > SCM Extended Warehouse Number - > Extended
WM - > Master Data - > Define Storage Types.

5 - Work Centers := (DCON) / (HVAS) / (HPAK) Its

Consider As Storage Type But Just Change Storage Type
Roles
SPRO - > SCM Extended Warehouse Number - > Extended
WM - > Master Data - > Define Storage Types.

6 - Doors := (Under Staging Area HA-GR := Inbound

Doors ) / (Under Staging Area HA-GI := Outbound Doors ),
Take Of Loading Direction (Inbound Or Outbound)
SPRO - > SCM Extended Warehouse Number - > Extended
WM - > Master Data - > WH Door - > Define WH Doors.

8 - Activity := Using BC Set SCPR20 - >

SCWM/LM_Activity

9 - Activity Areas :=
SPRO - > SCM Extended Warehouse Number - > Extended
WM - > Master Data - > Activity Areas - > Define Activity
Areas
Or (Generate Activity Area From Storage Type That Defined
Before)
SPRO - > SCM Extended Warehouse Number - > Extended
WM - > Master Data - > Activity Areas - > Generate Activity
Area From Storage Type

10 - Storage BIN And Assign It To Activity Area :=

BIN Used To Group Types of Materials Inside Storage
Types And If You Want you Can Also Split It Inside Sections
That Defined Under Storage Types.

( Example := ENGINE-01-01-01 / CCCCCCCCNNCNNCNN /

Area—Shelf-Stack-Level)
BIN Structure:= SPRO - > SCM Extended Warehouse
Number - > Extended WM - > Master Data - > Storage Bins
Door - > Define Storage Bin ID For Storage Bins Structures.
Define BIN:= SPRO - > SCM Extended Warehouse Number -
> Extended WM - > Master Data - > Storage Bins Door - >
Define Storage Bin Types.
Assign Assign:= SPRO - > SCM Extended Warehouse
Number - > Extended WM - > Master Data - > Activity Areas
- > Assign Storage Bin To Activity Area .

Note : You Can Also Copy All Warehouse Customizing .

SPRO - > SCM Extended Warehouse Number - > Extended
WM - > Cross-Process Settings - > Copy WH Customizing .

EWM WH Setting := SPRO - > SCM Extended Warehouse

Number - > Extended WM - > Master Data - > Define WH
Number Control ( Storage Process , Factory Calendar , Link
To External System , Distance Unit , CIF Setting ,Travel
Distance ( Euclidean , Manhattan is longer ))

ECC Vendor = EWM Business Partner And Can Found In T-

code BP and Table Is BUT/*
In S4Hana , There Is no Such Link Between ECC And EWM
Vendor BP As All Is Single T-code And Single Definition
Which Is Business Partner
//////////////////////////////////////////////////////////////////////////////// EWM Org
Structure
End////////////////////////////////////////////////////////////////////////////////////////////////////////
EWM PED Party Entitled To Dispose : (Material/Plant):
This is used to Tell us which item stock is coming from
which plant.

VIP:= When We Need To Extend Product To WH , PED Is

Mandatory Why :=
In ECC we have one material on Plant Level , but same
material is under many SLOC which can help us to Split
Between Item Stocks
But in EWM , The Same Item/SLOC Is Connect To One WH
and then this WH Connect One EWM
So what will happened if Item XX01 / SLOC 01 And XX02 /
SLOC 02 Is Connect To The Same WH And EWM !!!!
EWM Will Use PED To Different Between Each
Material/SLOC By Adding Prefix Before The Item/SLOC

EWM Custodian : Who Is Maintaining This WH:

EWM SC Unit (Physical Location):

- This is the physical Location Area.
- Against this SCU , we Maintained The Address , Business
Attribute ( WH, GR Office , Shipping Office ).

*SPRO - > SCM Extended Warehouse Number - > Extended

WM - > Master Data - > /SCMB Maintain Supply Chain Unit
( Type Should Warehouse , Don’t forget to define Business
Attribute “WH” )

VIP:= SCU Should Have Business Attribute “WH” In order

To Be Able To Connect To WH.
S4HANA EWM RFC Connect With Logical System:

SE38 - > /SCMW/R_ERP_RFC_DEST -> Enter Logical System

Name - > Execute.
Then ECC - > BD97

//////////////////////////////////////////////////////////////////////////////// EWM
Warehouse Process
Type///////////////////////////////////////////////////////////////////////////////////////////////////////
//////

1-Define WH Process Type :

EWM - > SPRO - > SCM Extended Warehouse Number - >
Extended WM - > Cross-Process Setting - > WH Task - >
Define WH Process Type (Use Putaway And Putaway with
Storage Process).
This will be used in step 5.

A Warehouse process type is used to define the activity or

movement of each process in a warehouse. It deals with
each warehouse process like packing, good receipt, good
issue and is assigned to each warehouse task document.
Example
For simple movements, warehouse process type defines
the storage type and bin for the movement of goods.
Warehouse process type is defined at the point of creation
of the warehouse document or in separate step.
All warehouse process types are further grouped into
warehouse process categories. Warehouse process
categories are used to define the goods movement in a
warehouse.

There are different warehouse process categories that are

predefined in the EWM system −
• Stock Removal
• Put-away
• Internal Movement
• Goods receipt posting
• Goods issue posting
• Physical inventory
• Cross Line putaway

2-PO & IBD := ECC - > Create PO - > Create IBD - >
Confirm & Save Delivered Qty - > Message “Shipping
Notification . Was Saved And Will Be Distributed to The
EWM Using Distribution Mode BD64.”

We Need To Check If The Above Notification Delivered To

EWM or Not
3-EWM - > /SCWM/IDN Maintain IBD Notification - > Execute
(if not found check ECC -> SMQ2 Or EWM -> SMQ2 Or EWM
- > SMQR)

4-ECC - > PO - > Document Category Should Be IDR , Which

Is “Inbound Delivery Notification”
5-ECC - > PO - > Item Category Must Be ELN , Which Is
“Inbound Delivery Notification”

6-EL “Shipping Notification”+ ELN - - - - Convert To INB +

IDLV , The Below Control How The Delivery Combination
Converted to new Combination In EWM.
Delivery Processing - > EWM - > SPRO - > SCM Extended
Warehouse Number - > Extended WM -> Interfaces - > ERP
Integration - > Delivery Processing - > Map Document Type
From ERP System To EWM System.

7-Document Number Range :=

EWM - > SPRO - > SCM Extended Warehouse Number - >
Extended WM -> Good Receipt Process- > Inbound Delivery
- > Manual Setting - > Define Document Type For Inbound
Delivery Process.

8-Document Type Determination for IBD :=

EWM - > SPRO - > SCM Extended Warehouse Number - >
Extended WM -> Good Receipt Process- > Inbound Delivery
- > Define Document Type Determination for Inbound
Delivery Process.

9-Determine Warehouse Process Type :=

(Combination for WH + Item Type + Document Type)
EWM - > SPRO - > SCM Extended Warehouse Number - >
Extended WM -> Cross-Process Setting- > Warehouse Task
- > Determine Warehouse Process Type .
-We Should Create record For Our EWM WHN And Assign
Document Type And Assign Also Warehouse Process Type
“1010”
-inside WH Process Type , we should define the “Goods
Mvt Bin” which will be used for the put away

//////////////////////////////////////////////////// EWM
Inbound Delivery
Notification Processing (Good Receipt
Processing)////////////////////////////////

EWM IBD Is Created Automatically Through PPF Action.

This Process Start After Creating Inbound Delivery On SAP
ECC , Which To Save Actual Delivery On EWM.

1 - Good Receipt IBD On EWM :

- EWM - > Easy Access - > Delivery Processing - > Inbound
Delivery - > Maintain IBD Notification - > Click On Good
Receipt Button.

Reversals - Good Receipt IBD On EWM :

- EWM - > Easy Access - > Delivery Processing - > Inbound
Delivery - > Maintain IBD Notification - > Click On Revers
Good Receipt Button.
- How This Reversal Reflect On ECC !!! - > In ECC
Distribution Model BD64 (filter on Sender & Receiver to
find your defined Distribution Model )- > BABI ( 1- Save
REPLICA , 2 - Delivery CHANGE)
Adjust - Qty IBD On EWM : ( Partial Delivery Or Adjust
Qty Or Reject IBD )
- EWM - > Easy Access - > Delivery Processing - > Inbound
Delivery - > Maintain IBD Notification - > Get Your IBD - >
Process Code - > With Qty Adjustment ( it can be - or + ).
- this is to edit IBD Qty .
- the options list here either it will adjust same IBD or
create new IBD in EWM And ECC Also with the new qty.
- Process Codes := EWM - > SPRO - > SCM Extended
Warehouse Number - > Extended WM -> Cross-Process
Settings - > Delivery Warehouse Request -> Process Codes
- > Define Process Codes .

How EWM Send New IBD On ECC After Adjusting Qty Or

Process Some IBD Modification On EWM :
- EWM - > SPRO - > SCM Extended Warehouse Number - >
Extended WM -> Cross-Process Settings - > Delivery
Warehouse Request -> Process Codes - > Define Process
Codes .
- EWM - > SPRO - > SCM Extended Warehouse Number - >
Extended WM -> Interfaces - > ERP Integration - > Delivery
Processing - > Define Number Ranges For ERP Document.
- ECC - > SPRO -> Logistics Execution -> Shipping - >
Deliveries -> Define Delivery Type - > Search for EL - >
Double Click And Check “Number Systems Tab” and NR Int.
assgt .

EWM Stock Type : (When We Do GR For IBD That Linked

To WH Process Type Which Contain Availability Group
Which Contain Stock Type , The System Will Go GR For
This Stock Type In ECC.)
- EWM - > SPRO - > SCM Extended Warehouse Number - >
Extended WM -> Goods Receipt Process - > Configure
Availability Group for Put Away- > Configure StockType .
EWM Link EWM + Availability Group With ECC Plant +
SLOC + Logical System:
- EWM - > SPRO - > SCM Extended Warehouse Number - >
Extended WM -> Interfaces > ERP Integration -> Goods
Movements - > Map SLOC From ERP System To EWM. .

EWM After Good Receipt:

After Perform Good receipt On IBD Notification , You
Should Create Warehouse Task And Assign It To
Warehouse Order And Then Assign Warehouse Order To
Resource To Complete Actions.
EWM IBD Work As Warehouse Request To Create
Warehouse Tasks.
Warehouse Task := Defines The Activity Between Source
And Destination
Warehouse Order := Its Execution Of The Warehouse
Tasks (List Of Warehouse Tasks)
Example : I Have 3 Product Will Go To The Same Bin ,all
this Warehouse tasks will be grouped in one warehouse
Order to be executed.
Or
Moving Items From Staging-BIN To Final-BIN.

2- EWM Perform Put away After Good Receipt:

1 - in The Same T-code “EWM Maintain IBD” - > Select Line
- > Menu “Inbound Delivery” - > Follow-On-Functions - >
Warehouse Task.
2 - “If No Put Away Strategy Exist” Go To Default Values
Tab - > In “Dest.Storage.Bin” Enter Storage Tye & Storage-
Bin - > Confirm - > Confirm & Save - > Warehouse Order
xxxx Created .
Or
2 - “If Put Away Strategy Exist” in the Work Request Tab -
> Choose Your Line - > Click Create - > System Will
Purpose Des.Bin Based On Put-away Strategy -> Create &
Save - > Warehouse Order xxxx Created .
3 - “Warehouse Task Menu” - > Confirm Or Confirm & Save

Warehouse Monitor :
EWM - > Easy Access - > EWM - > Monitoring - > Warehouse
Management Monitor ( Choose WH & Monitor )
Usage:
1-Reporting Tool.
2-List Of Warehouse Orders.
3-List Of Warehouse Tasks.

////////////////////////////////////////////////////////////////////////////////////////////////////// EWM
Put-away
Strategy///////////////////////////////////////////////////////////////////////////////////////
How Do The System Determine which Storage Bin To Store
?
Why we store this item in this Storage Bin ? Maybe based
on item type (cold , hot)

1- Put Away Strategy : (Storage Type Level

Searching) Storage Type Determination

1 - Storage Type Level Searching .

2 - Storage Section Level Searching .
3 - Storage Bin Level Searching .

Example:
If I have one storage type “Food” With Storage Sections
“FORZEN” , ”Oven” , ”Normal”
And inside “Frozen” I have Bin (Plastic , Liquid).

When I receive Packed Milk I Should receive in “Food” - >

“FROZEN” -> “Plastic”.

Configuration:
1 - Create Storage Type Search Sequence:
- EWM - > SPRO - > SCM Extended Warehouse Number - >
Extended WM -> Goods Receipt Process - > Strategies ->
Storage Type Search -> Define Storage Type Search
Sequence for put-away -> new entry to create search
sequence (EWM Warehouse Number + SEQ1) := SEQ1.

2 - Assign Storage Type To Storage Type Search

Sequence:
Here we assign Storage Types to The Sequence Created In
Step1.
- EWM - > SPRO - > SCM Extended Warehouse Number - >
Extended WM -> Goods Receipt Process - > Strategies ->
Storage Type Search -> Assign Storage Type To Storage
Type Search Sequence .
- Create New Entry - > (WHN + SEQ1) + Storage Type
“Food” : = 1 inside SEQ1
- Create New Entry - > (WHN + SEQ1) + Storage Type “Non-
Food” = 2 inside SEQ1
This means that system will try to store our product first
in “Food” if not then will try to store it in “Non-Food”

3 - Define Putaway Control Indicator:

Now How To get This Sequence Against Out Product.
- EWM - > SPRO - > SCM Extended Warehouse Number - >
Extended WM -> Goods Receipt Process - > Strategies ->
Storage Type Search -> Define Putaway Control Indicator.
- Create New Entry (WHN + PACI01) + SEQ1 := PACI01 .

Note :
Where We Assign This Putaway Control Indicator “PACI01” ,
Its In Product Master Data.

4 - Assign Putaway Control Indicator To Product Master:

EWM - > /n/SCWM/MAT1 - > Choose Your Material - >
Change - > Tab “Warehouse Data” - > in “Putaway Control
Indicator” - > Enter PACI01 .
5 - Assign Putaway Control Indicator To Warehouse
Process Type:
- EWM - > SPRO - > SCM Extended Warehouse Number - >
Extended WM -> Goods Receipt Process - > Strategies ->
Storage Type Search -> Specify Storage Type Search
Sequence for Putaway.
- Create New Entry ( WHN + PACI01 + WH Process Type +
SEQ1 + Putaway Rules “No Putaway Rule” ).

What is Put-away Rule ?

2 - Addition To Existing Stock / Empty Bin := this will fill
Purposed Bin then move the remain Bin qty to the next
Bin.
3 - Consolidation Group.
4 - General Storage Area.
5 - Empty Bin := Purposing Next Empty Bin
6 - Transit Warehouse : Staging Area for Door.

6 - Optimize Access Strategy For Storage Type Search:

Put-away:
- EWM - > SPRO - > SCM Extended Warehouse Number - >
Extended WM -> Goods Receipt Process - > Strategies ->
Storage Type Search -> Optimize Access Strategy For
Storage Type Search: Put-away.
- Create New Entry ( WHN + new Seq.No 1 ) and Check
Put.Start & ProcType

7 - Assign Storage Bins To Activity Areas:

- EWM - > SPRO - > SCM Extended Warehouse Number - >
Extended WM -> Master Data - > Activity Areas - > Assign
Storage Bins To Activity Areas.

8 - Define Sort Sequence for Activity Area:

What is the sort inside the activity area
- EWM - > SPRO - > SCM Extended Warehouse Number - >
Extended WM -> Master Data - > Activity Areas - > Define
Sort Sequence for Activity Area.

9 - Sorting Storage Bins:

EWM - > /SCWM/SBST - Sort Storage Bins - > Choose WHN -
> execute -> when list displayed - > click on execute to
sort all the bins inside your Warehouse.

2- Put Away Strategy : (Storage Section Level

Searching) Storage Section Determination
How It Works :
Under Storage Type Level - > Under Put-away control
area - > there is checkbox “Storage Section Check”

1 - Create Storage Section Indicator:

- EWM - > SPRO - > SCM Extended Warehouse Number - >
Extended WM -> Goods Receipt Process - > Strategies ->
Storage Section Search -> Create Storage Section
Indicator - >
—— > Our Defined Section ( BEAR , CABLE ) / ( BULB ,
FUSE ) / ( BULK ) —— <
- new entry ( WHN + Defined Storage Section BEAR +
Description ) := Storage_Section_Ind1
- new entry ( WHN + Defined Storage Section CABLE +
Description ) := Storage_Section_Ind1
- new entry ( WHN + Defined Storage Section BULB +
Description ) := Storage_Section_Ind1

2 - Maintain Storage Section Search Sequence: ( i nside

Each Section Indicator We Can Access Multiple Section )
- EWM - > SPRO - > SCM Extended Warehouse Number - >
Extended WM -> Goods Receipt Process - > Strategies ->
Storage Section Search ->
Maintain Storage Section Search Sequence - > .
- new entry ( WHN + Defined Storage Type Engine +
Defined Storage Section Indicator Storage_Section_Ind1 )
+ Any Defined Storage Section BEAR .
- new entry ( WHN + Defined Storage Type Engine +
Defined Storage Section Indicator Storage_Section_Ind1 )
+ Any Defined Storage Section CABLE .

Example :
Section Ind FROZEN1 := ( Section 1 , Section 2 )
Section Ind FROZEN2 := ( Section 3 , Section 4 )
Section Ind FROZEN3 := ( Section 5 , Section 6 )
Section Ind FROZEN4 := ( Section 7 , Section 8 )

3 - Storage Section Check : Mandatory Step To Activate

Storage Section Search
- EWM - > SPRO - > SCM Extended Warehouse Number - >
Extended WM -> Goods Receipt Process - > Strategies ->
Storage Section Search ->
Storage Section Check - >
- Using entry ( WHN + Defined Storage Type Engine +
Choose One Option (1-Storage Section Determination And
Check , 2-Storage Section Determination No Check).

4 - Assign Storage Section Indicator To Product Master:

EWM - > /n/SCWM/MAT1 - > Choose Your Material - >
Change - > Tab “Warehouse Data” - > in “Storage Section
Ind” - > “Write The Section That You Need To Check It
During Put-away” .

3- Put Away Strategy : (Storage Bin Level

Searching) Storage Bin Determination

1 - Define Storage Bin Types:

- EWM - > SPRO - > SCM Extended Warehouse Number - >
Extended WM -> Goods Receipt Process - > Strategies ->
Storage Bin Determination -> Define Storage Bin Types - >
- new entry ( WHN + New Storage Bin Type Name BIN1 +
Bin Type Description + Max Weight + Max Volume + Max
Capacity + Length + Width ) .
- new entry ( WHN + New Storage Bin Type Name BIN2 +
Bin Type Description + Max Weight + Max Volume + Max
Capacity + Length + Width ) .

2 - Assign Bin Type To Storage Bins :

EWM - > /n/SCWM/LS03 .

3 - Assign Bin Type to Product Master :

EWM - > /n/SCWM/MAT1 - > Choose Your Material - >
Change - > Tab “Warehouse Data” - > in “Storage Bin Type” -
> “Assign BIN Type BIN1 Or BIN2” .

4- Put Away Strategy : (Alternative Storage Bin

Level Searching) Alternative Storage Bin Determination.
- EWM - > SPRO - > SCM Extended Warehouse Number - >
Extended WM -> Goods Receipt Process - > Strategies ->
Storage Bin Determination -> Alternative Storage Bin Type
Sequence . - >
- new entry ( WHN + Storage Type + Main BIN ) +
Alternative Bin ( So ob SAP hat gefindt dass Main BIN Ist
nicht genug er wird verwenden die nachte oder alternative
BIN.
- if we assign any Bin Type Against Storage Type , the
system will search for this BIN Tye During Put-away , and
this Bin Type was not available , The System will search
for this Alternative Bin Type.

////////////////////////////////////////////////////////////////////////////////////////////////////// EWM
Handling
Unit///////////////////////////////////////////////////////////////////////////////////////

Es ist gerade packeging Material + Product = Unique

Identifier
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////
//////////Other
Issues////////////////////////////////////////////////////////////////////////////////////
Before Assign Shipping Point To Plant:

Sales Organization to Company Code(OVX3)

Distribution Channel to Sales Organization(OVXK)

Division to SO(OVXA)

Set up Sales Area(OVXG)

Sales Office to Sales Area(OVXM)

Sales Group to Sales Office(OVXJ)

SO- Distribution Channel- Plant(OVX6)

Sales Area to CCA(OVFL)

Purchasing Organization to CC(OX01)

Purchasing Organization to Plant(OX17)

Standard PO to Plant(OMKI)

Shipping Point to Plant(OVXC)

////////////////////////////////////////////////////////////////////////////////Issues///////////////////////
////////////////////////////////////////

-What Is The Wave ?

-Production Planning Integration.
-IDOC.
-Mobile RFC Configuration.
-Incase if we need to change ECC IBD Qty after sending
the IBD To EWM , the change will not be allowed in ECC ,
we should do the Changs in EWM IBD Notification And this
will reflect to ECC Again.
-EWM IBD Work As Warehouse Request To Create
Warehouse Tasks.
-We Can Have Bins Without Sections , Storage Section is
optional to create storage Bins ( we do this if we define
Storage Type with one Bin for BULK Product ) .
-/SCWM/LS01 - Create Storage Bin.
-/SCWM/LS02 - Change Storage Bin.
-/SCWM/LS03 - Display Storage Bin.
-/SCWM/LS10 - Generate Storage Bin.
-/SCWM/LS11 - Mass Change Of Storage Bins In
Warehouse .
-/SCWM/SBST - Sort Storage Bin.

Was ist die Vorteil ob wir haben EWM in trennen SCM BOM
?
1- filxbilitaet zu Verbindung mit irgendein ERP ( SAP Oder
Non-SAP ).

What is the difference between

physical stock and available stock
in EWM?
A. Physical stock is what we store in the
warehouse, available stock means that part
which is available for sales.
B. If the physical stock and the available
stock are different I need to do an inventory
correction.
C. Physical stock is what is physically
located on the bin, the available stock shows
what is available for movements, takings
open putaway or picking warehouse tasks
into account.

/SCWM/PUT_BIN_DET039 -
STORAGE TYPE SEARCH
WITH TEMPLATE: NO ENTRY
F. ITEM &1 FOUND (DETAILS
1) - /SCWM/PUT_BIN_DET 039
RFUMSV00 - Advance Return for Tax on
Sales/Purchases CL_GUI_FRONTEND_SERVICES -
Frontend Services
This documentation is copyright by SAP AG.

DIAGNOSIS
Search key (part 1):
• Warehouse number: ,,,,
• Putaway control indicator: ,,
• Warehouse process type: ,,
• Quantity classification: ,,
SYSTEM RESPONSE

PROCEDURE
Create a storage type search sequence for
putaway that matches the search key in
Specify Storage Type Search Sequence for
Putaway, or define an optimized access
under Optimize Access Strategy for Storage
Type Search: Putaway.