Three-Bus System Data
The one-line diagram for the 3-Bus system is presented in Figure 1. There are two units and one wind
farm in the system. The generation output from the wind farm is modeled as negative load. All loads are
aggregated net load in L1 and L2. The transmission line and unit parameters are presented in Table 1 and
Table 2, respectively.
BUS 1 BUS 2
G2
G1
L1
BUS 3
L2
W
Figure 1: One-line Diagram for 3-Bus System
Table 1: Line Data for The 3-Bus System
Line From To Reactance (p.u.) Flow Limit (MW)
1 1 2 0.1 82
2 1 3 0.15 100
3 2 3 0.1 50
Table 2: Unit Data for The 3-Bus System
Unit # Bus # IC ($/MWh) P max* P min* RU ** RD ** P0 *
1 1 10 180 80 25 25 120
2 2 25 80 10 10 10 10
* MW ** MW/15min
Table 3: Load Data for The 3-Bus System (MW)
Time Bus # Forecasted LB UB Actual
2 80 80 80 80
1
3 60 60 60 60
2 90 82.5 97.5 97
2
3 65 62 68 67
2 95 87 103 92
3
3 72 69 75 73