Scribd
Upload
52 views1 page

Heat & Mass Transfer 12.07.2019

This document discusses heat and mass transfer concepts. It defines steady state heat conduction and effective thermal conductivity. It lists the three modes of heat transfer as conduction, convection, and radiation. It also provides the three dimensional heat conduction equation and defines fin effectiveness. The document then provides five problems involving deriving Fourier's law of heat conduction for different geometries, calculating heat loss and temperatures for a insulated steam pipe, determining heat transfer values for an air-cooled copper tube, and calculating heat flow and temperature distribution for a hollow cylinder.

Uploaded by

manikandan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
52 views1 page

Heat & Mass Transfer 12.07.2019

This document discusses heat and mass transfer concepts. It defines steady state heat conduction and effective thermal conductivity. It lists the three modes of heat transfer as conduction, convection, and radiation. It also provides the three dimensional heat conduction equation and defines fin effectiveness. The document then provides five problems involving deriving Fourier's law of heat conduction for different geometries, calculating heat loss and temperatures for a insulated steam pipe, determining heat transfer values for an air-cooled copper tube, and calculating heat flow and temperature distribution for a hollow cylinder.

Uploaded by

manikandan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Heat & Mass Transfer 12.07.

2019

1. Define steady state heat conduction.


2. What is effective thermal conductivity.
3. State fourier’s law of Heat conduction.
4. How does laminar flow differ from Turbulence flow?
5. Define critical thickness of insulation with its significance.
6. What are the three modes of heat transfer?
7. Define conduction.
8. State Newton’s law of cooling.
9. Write down the three dimensional heat conduction equation in Cartesian co-ordinate system.
10. Define fin effectiveness.
PART- B

1. Derive the Fourier law of Heat conduction equation for Hollow cylinder.
2. Derive the Fourier law of Heat conduction equation for Sphere.
3. A steel pipe of 170mm inner dia and 190 mm outer dia with thermal conductivity 55 W/mK is covered with two
layers of insulation. The thickness of the first layer is 25mm (K=0.1 W/mK) and the second layer thickness is
40 mm (K=0.18 W/mK). The temperature of the steam and inner surface of the steam pipe is 320 oC and outer
surface of the insulation is 80oC. ambient air temperature is 25oC. the surface co-efficient for inside and outside
surfaces are 230 W/m2K and 6 W/m2K respectively. Determine the heat loss per meter length of the steam pipe
and layer of contact temperatures and also calculate the overall heat transfer co-efficient.
4. Air at 900C flows in a copper tube of 5 cm inner dia with thermal conductivity 380 W/mK and with 0.7 cm thick
wall which is heated from the outside by water at 1200C. A scale of 0.4 cm thick is deposited on the outer
surface of the tube whose thermal conductivity is 1.82 W/mK. The air and water side unit surface conductance
are 220 W/m2K and 3650 W/m2K respectively. Calculate
1. Overall water to air transmittance.
2. Water to air heat exchange.
3. Temperature drop across the scale deposit.
5. A hollow cylinder 5 cm inner dia and 10cm outer dia has inner surface temperature of 2000C and outer surface
temperature of 1000C. determine heat flow through the cylinder per meteer length also determine the
temperature of the point half way between the inner and outer surfaces. Take K=1W/mK.

You might also like