Lifting Plan
Lifting Plan
Lifting Plan
LOAD DESCRIPTION:
LIFT DESCRIPTION:
A. TOTAL LOAD: -
I. Load Weight LBS
II. Wt. of Aux. BLOCK LBS
III. Wt. Of Main BLOCK LBS
IV. Wt. OF LIFTING BEAM LBS
V. Wt. OF SLING /SHACKELS LBS
VI. Wt. OF JIB/EXT (erected /stowed) LBS
VII. Wt. OF HOIST ROPE LBS
TOTAL WEIGHT
B. CRANE: -
I. TYPE OF CRANE
II. MAXIMUM CRANE CAPACITY LBS
III. RADIUS (Maximum) FT
IV. RADIUS (MINIMUM) FT
V. BOOM LENGTH (Maximum) FT
VI. BOOM LENGTH (MINIMUM) FT
VII. CRANE CAPACITY (Maximum Radius) LBS
VIII. CRANE CAPACITY (MINIMUM Radius) LBS
IX. BOOM ANGLE(Maximum) DEG
X. BOOM ANGLE (MINIMUM) DEG
XI. GROSS LOAD OF CRANE LBS
XII. LIFT IS …………………. % OF THE CRANE RATED CAPACITY
C. HOIST ROPE: -
MAIN AUX 1 AUX 2
# of parts
Rope diameter
Capacity
D. RIGGING: -
I. HITCH TYPES:
II. NO. OF SLINGS: SIZE
III. SLING TYPE:
IV. SLING ASSEMBLY CXAPACITY: LBS
V. SHACKLES SIZE(s):
VI. SHACKEL RATED CAPACITY(s): LBS
Page 1 of 2
E. CRANE PLACEMENT: -
I. MAXIMUM BEARING PRESSURE :
II. GROUND CONDITION SUITABLE FOR LOAD? YES / NO
III. HIGH VOLTAGE OR ELECTRICAL HAZARDS? YES / NO
IV. OBSTRUCTION TO LIFT OR SWING? YES / NO
V. TRAVEL WITH LOAD REQUIRED? YES / NO
H. SIGNATURES: -
I. CRANE OPETATOR ………………………….
II. RIGGER ………………………….
III. SIGNAL PERSON ………………………….
IV. LIFT SUPERVISOR ………………………….
Page 2 of 2