Ds SH Arc Pci Englisch v0700

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

SH ARC PCI

SH ARC PCI ARCNET PCI card


4. Specifications
Baud rates: 2.5/5/10 Mbps with coax,
156 kbps to 10 Mbps via RS-485, coax
via BNC slot, RS-485 via 9 pin. SUB D
female
Termination of the RS-485 interface to
be activated via Dip Switch
Accessible in the I/O area
Data register compatible to any other
COM20020/22 SOHARD ARCNET
cards
Compatibility: ANSI/ATA 878.1,
PCI 2.1
Temperature range: operation 0°C to
+55°C, storage: -20°C to +85°C
Weight: 200 g packed for shipping

5. Order Information
Order designations:

SH ARC PCI
1. Field of Application 2.3 Fieldbus Connection:
RS-485 Interface 156 kbps-10 Mbps
The SOHARD ARCNET card SH ARC PCI The card can be connected to the fieldbus COAX Interface 2.5 Mbps
with PCI bus is designed for use in via an optically decoupled RS-485
industrial PCs. interface or via a COAX connector (via SH ARC PCI K
HIT). RS-485 termination is possible via COAX Interface 2.5 Mbps
It has a coaxial interface (bit rate = DIP switch.
2.5 Mbps) as well as an optically SH ARC PCI 10
decoupled RS-485 interface. By means of four LEDs, the following RS-485 Interface 156 kbps-10 Mbps
activities can be observed: COAX Interface 5-10 Mbps
With the new controller COM20022 by
SMSC, bit rates of up to 10 Mbps amay be COAX transceiver active/not active SH ARC PCI K10
used. The card is suited for “plug & play”. (backplane-mode on/ff) COAX Interface 5-10 Mbps
Thus the long-winded configuration of activity on the ARCNET reception
addresses and interrupts is no longer channel 6. Contact adress
necessary. Mr. Michael Kaufmann
activity on the ARCNET transmitting
An integrated PC/104 compatible slot on channel Phone: 0049-(0)911 / 97 341-522
the card offers a variety of expansion Fax: 0049-(0)911 / 97 341-510
display of PC accesses to the e-mail: [email protected]
possibilities.
ARCNET module
Like on the SH FARC E3, LED‘s that are Technical information is subject to
RS-485 termination via DIP switch changes - misprints excepted!
visible from the outside facilitate a fast
diagnosis of occurring interference or ARCNET® is a registered trademark of
network troubles. 3. Performance Features
Datapoint Corporation.
CE mark (industrial environment)
The CE mark guarantees trouble-free use Manuals, drivers and further informations
even in a rough industrial environment. COM20022 module by SMSC are available at http://support.sohard.de
COAX and optically decoupled RS-
2. Functionality 485 interface V0700 June 2001

The following components are situated on LED-displays showing ARCNET bus


the card: activities
2.1 ARCNET Controller: LED-display showing PC bus activity
The SH ARC-PCI features the COM20022 LED-display for COAX transceiver
ARCNET controller. This controller is fully active
compatible with the COM20020 and
PC/104 slot (optional)
supports additional settings and a baud-
rate of up to 10 Mbps. DOS Enabler for the operation of the
card under MS DOS, then SH FARC
2.2 PCI Bus Interface: E3 compatible (Please feel free to
The SH ARC PCI is a 32 Bit card. It is download from the SOHARD Support
accessible by more than 8 I/O addresses Database)
or via the memory area. The PCI Bus is drivers available for several operating SOHARD AG
PCI 2.1 conform. systems Wuerzburger Str. 197
Enhanced mode for particularly 90766 Fuerth, Germany
access Phone: 0049-(0)911/9 73 41-0
Fax: 0049-(0)911/9 73 41-10
e-mail: [email protected]
http://www.sohard.de

You might also like