E20-393 V9.02

Download as pdf or txt
Download as pdf or txt
You are on page 1of 15

KillTest

*KIJGT  3 WCNKV [   $ GV V GT  5 GT X KE G

Q&A

NZZV ]]]QORRZKYZIUS

=KULLKXLXKK[VJGZKYKX\OIKLUXUTK_KGX
The safer , easier way to help you pass any IT exams.

Exam : E20-393

Title : Unity Solutions Specialist


Exam for Implementation
Engineers

Version : V9.02

1 / 14
The safer , easier way to help you pass any IT exams.

1.What is the maximum number of Thin Clones that can be created from a Base LUN on a Dell EMC Unity
array?
A. 8
B. 16
C. 32
D. 64
Answer:

2.Match each Integrated ESRS characteristic with its attribute.

Answer:

3.What is used to create a Proxy NAS Server on a Dell EMC Unity array?
A. UEMCLI command
B. Service command
C. Unisphere GUI
D. initCLl command
Answer:

4.What is the recommended configuration for iSCSI connections to ensure continuous access to the Dell
EMC Unity storage system in the event of a failover?
A. Set up SCSI interfaces on the same port of each SP and leverage the host-based multi-pathing software
B. Set up iSCSI interfaces on network ports that are configured with LACP on the same SP
C. SA up iSCSI interfaces on network ports on different SPs that are configured with Fail Safe Networking
(FSN)
D. Set up SCSI interfaces to use VLA.N tagging and configure the host to utilize the same VLAN
Answer:

5.Which feature can be configured for a Dell EMC Unity file system NFS share?
A. Protocol Encryption
B. Host Access Level
C. Branch Cache Enabled
D. Access-Based Enumeration

2 / 14
The safer , easier way to help you pass any IT exams.

Answer:

6.A Storage administrator needs to expand their FAST Cache. The current configuration consists of four
200 GB SAS Flash 2 drives.
What can be used to expand the FAST Cache?
A. Two 200 GB SAS Flash 2 drives
B. Two 400 GB SAS Flash 2 drives
C. Two 200 GB SAS Flash 3 drives
D. Two 400 GB SAS Flash 3 drives
Answer:

7.Observing the SPE Fault LED during initial power up, what colors and time duration does the SPE use to
indicate that it is ready for initialization?
A. Amber for 3 seconds, then blue tor 1 second
B. Amber for 1 second, then blue for 3 seconds
C. Blue tor 1 second, then green for 3 seconds
D. Amber for 1 second, then green for 2 seconds
Answer:

8.I ho etorred production interface is active.


What does the Dell EMC Unity system do once a NAS Servor starts outbound traffic to an
external service?
Uses the active production interface
nab10s Packet Reflect
Uses the backup interlace
Initiates NAS Sower failover
Answer:

9.The preferred production interface is active.


What does the Dell EMC Unity system do once a NAS Server starts outbound traffic to an external service?
A. Uses the active production interface
B. Enables Packet Reflect
C. Uses the backup interface
D. Initiates NAS Server failover
Answer:

10.In Unisphere, a storage administrator has inadvertently disabled Data Reduction on an existing LUN.
What would result from this action?
A. Data Reduction, once enabled. cannot be disabled.
New data is deduplicated or compressed.
B. A background LUN migration occurs, moving the data to a new LUN where it is inflated.
New data is neither deduplicated nor compressed.
C. Existing data is left in its current state.
New data is neither deduplicated nor compressed.

3 / 14
The safer , easier way to help you pass any IT exams.

D. Existing data is dynamically inflated to its full size, undoing the impact of deduplication and
compression.
New data is neither deduplicated nor compressed.
Answer:

11.What is an example of a NAS Server replication session grouped operation?


A. Create
B. Resume
C. Delete
D. Sync
Answer:

12.For high availability within ISCSI, connections should be attached using what?
A. Twinax cables
B. Jumbo frames
C. Flow control
D. Different subnets
Answer:

13.A storage administrator notices that all the configured Host I/O Limits policies are Globally Paused.
How can the administrator put these policies into the Active state?
A. Select the Active option on the Host I/O Limits Settings page
B. Select the Resume option on the Host I/O Limits Settings page
C. Select the Resume action for each Host I/O Limits policy
D. Select the Active action for each Host I/O Limits policy
Answer:

14.What is a connectivity rule for a host that connects to multiple Dell EMC Unity systems?
A. Host must connect to all the arrays using a single protocol
B. CNA connections to host must be used with alternating protocols
C. iSCSl protocol is required to connect a host to multiple arrays
D. Host can connect to different arrays with different protocols,
Answer:

15.Refer to the exhibit.

Which port is used to connect the DPE to a DAE?


A. A
B. B
C. C
D. D
Answer:

4 / 14
The safer , easier way to help you pass any IT exams.

16.Dell EMC Unity systems collect several metrics at various time intervals and use ESRS to send the
information to CloudIQ.
What are those metrics and their time intervals?
A. Alerts=5 min
Performance= 5 min
Capacity =1 hr
Configuration=1 hr
B. Alerts=2 min
Performance=1 hr
Capacity =1 hour
Configuration =1 hr
C. Alerts=2 min
Performance=30 min
Capacity=1 hr
Configuration=1 hr
D. Alerts=5 min
Performance=1 hr
Capacity=2 hour
Configuration=1 hr
Answer:

17.A storage administrator is replicating a NAS Server from one Dell EMC Unity to another. The destination
system has a different network scheme than their source system
What operation must be done on the destination system NAS Server to ensure data is accessible after
failover?
A. Change the Override properties
B. No changes required
C. Modify DNS Cache
D. Create a new interface
Answer:

18.A storage administrator is tasked with configuring a density-based Host l/O policy based on the
following requirement:
- Resource size 100 GB LUN
- Density Limit: 20 IOPS
What is the total IOPS set by this policy?
A. 120
B. 1.200
C. 2.000
D. 2,100
Answer:

19.What is a characteristic of FAST VP?

5 / 14
The safer , easier way to help you pass any IT exams.

A. FAST VP optimizes data placement by moving 1GB slices between disk tiers
B. User can enable or disable FAST VP at the LUN level
C. User can set the FAST VP data relocation rate
D. Once enabled, FAST VP data relocation runs in background at all times
Answer:

20.A company needs to expand their dynamic pool by 5 TB. The current dynamic pool consists of
sixty-three 3.8 TB SSDs that are configured for RAID5 4+1
What is the minimum number of drives needed for the pool expansion?
A. 1
B. 6
C. 7
D. 8
Answer:

21.What is the size of a Private LUN slice?


A. 8 KB
B. 64 KB
C. 256MB
D. 1024MB
Answer:

22.While examining the health status of a Dell EMC Unity array, the administrator notices the internal SSD
is in a faulted state.
Which condition caused this fault?
A. There are no spare blocks remaining on the SSD
B. BBU is not charged enough to keep the SSD powered on
C. SP Cache had too many dirty pages to copy to the SSD
D. There are only 5% of the spare blocks remaining on the SSD
Answer:

23.Which Dell EMC Unity service task would most quickly resolve connection problems between the
storage system and Unisphere?
A. Restart the Management Software
B. Reimage the Storage Processors
C. Reboot the Storage Processors
D. Reinitialize the Storage System
Answer:

24.Fibre Channel access from a server to the Storage Processor can use what pathing options?
A. Multipath only
B. Single Path and Multipath only
C. Single Path and Alternate Path only
D. Single Path, Multipath, and Alternate Path

6 / 14
The safer , easier way to help you pass any IT exams.

Answer:

25.How is a local LUN Move initiated?


A. First select the Pool to move the LUN into, then choose the Move operation, then select a LUN
B. First select the LUN, then select the Pool to move the LUN into, then choose the Move operation
C. First choose the Move operation, then select a LUN then select the Pool to move the LUN into
D. First select a LUN, then choose the Move operation, then select the Pool to move the LUN into
Answer:

26.How can Data at Rest Encryption be activated on Dell EMC Unity?


A. Install Data at Rest Encryption license at any time using Unisphere Settings > Install License
B. Enable Data at Rest Encryption, but only during initial configuration, using Unisphere settings > Manage
Encryption
C. Install Data at Rest Encryption license, but only during initial configuration
D. Enable Data at Rest Encryption at any time using Unisphere settings > Manage Encryption
Answer:

27.In Unisphere, where can a storage administrator create an asynchronous LUN replication session?
A. Replication page only
B. LUN Creation wizard or the LUN Properties window
C. Replication page or the LUN Properties window
D. LUN Properties window only
Answer:

28.You are Implementing a new Del EMC Unity 450F with twenty-five 7.6 TB SSD drives. You need to
standardize on a RAID5 4+1 stripe size.
What needs to be done to configure a dynamic pool?
A. Use the service account via UEMCLI to configure the pool with all the drives specifying a RAID5 4+1
stripe width
B. Use UEMCLI to configure the pool with all the drives specifying RAID5 4+1.
C. Use Unisphere to select all the drives and select RAID5 4+1 in the drop-down box
D. Use Unisphere to build a traditional pool using RAID5 4+1 Convert the traditional pool to a dynamic pool
once the zeroing of the drives is complete
Answer:

29.What is the function of the File Import data mobility feature?


A. Provides disaster recovery, replicating a VNX VDM and its file systems to a remote Dell EMC Unity
system
B. Migrates NFSv3 configured VDM with its associated file systems from a VNX system to a Dell EMC
Unity system
C. Imports NFSv3 configured NAS Server with its associated file systems from one Dell EMC Unity system
to another
D. Provides mobility of NFSv3 datastores between Dell EMC Unity systems for ESXi host disaster
recovery

7 / 14
The safer , easier way to help you pass any IT exams.

Answer:

30.The cache has sent data to the Data Reduction logic during proactive cleaning or flushing.
What is the correct sequence of steps taken by the Data Reduction logic?

Answer:

31.What are the supported options for the Professional Edition of the Dell EMC UnityVSA?
A. 4 TB, 10 TB, and 50 TB
B. 4 TB, 25 TB, and 50 TB
C. 10 TB, 25 TB, and 50 TB
D. 10 TB, 30 TB, and 50 TB
Answer:

32.What is the maximum hierarchical Snapshot level, for both LUNs and file systems, on Dell EMC Unity
arrays?
A. 10
B. 16
C. 20
D. 32
Answer:

33.What technology is used by Dell EMC Unity Snapshots?


A. Redirect on Write, which requires a storage resource reserved to hold original data that changed to
preserve the point-in-time view
B. Copy on First Write, which requires no storage resource is needed to create a Snapshot; writes are
copied to parent pool
C. Redirect on Write, which requires no storage resource to create a Snapshot; writes are redirected on
parent pool

8 / 14
The safer , easier way to help you pass any IT exams.

D. Copy on First Write, which requires a storage resource reserved to hold original data that changed to
preserve the point-in-time view
Answer:

34.A storage administrator wants to configure a Dell EMC Unity system to join the list of arrays remotely
monitored for activity and system status. The administrator is using Unisphere Central The security policy
on the Unisphere server is set to "automatic”
What additional security information must be specified in the Unisphere Settings window to enable
communication with Unisphere Central?
A. Unisphere Central IP address and login credentials
B. Unisphere Central IP address and Central Hash
C. Unisphere Central Hash and login credentials
D. Unisphere Central Hash and challenge phrase
Answer:

35.What is the default NFS host access option?


A. Read/Write, Allow Root
B. Read/Write
C. Read-Only
D. No Access
Answer:

36.Which Wol object stores a copy of a VM's memory pages when the VM is powered on?
A. Swap
B. Memory
C. Data
D. Config
Answer:

37.What is the role of Protocol Endpoints in Dell EMC Unity VMware storage provisioning?
A. Enable transparent host attach operations to Snapshots of Wol datastores
B. Manage host IO workload balance between multiple paths to the VMware datastores
C. Establish a data path between the ESXi host and the respective Wol datastores
D. Provide a write consistent view to the host when accessing multiple VMware datastores
Answer:

38.When a manual snapshot of a file system is created, what items are required for its configuration?
A. Name, Description, and Access Type
B. Description, Retention Policy, and Schedule
C. Name, Retention Policy, and Access Type
D. Retention Policy, Access Type, and Schedule
Answer:

39.On a physical Dell EMC Unity system, what is the maximum size to which a UFS64 file system can be

9 / 14
The safer , easier way to help you pass any IT exams.

extended?
A. 32 TB
B. 64 TB
C. 128 TB
D. 256 TB
Answer:

40.When can a file system be defined as thin or thick?


A. Any time after the file system has been created
B. Only when enabling data reduction on the file system
C. Only when adding host access to the file system
D. Only when creating the file system
Answer:

41.When creating a new LUN on a Dell EMC Unity array using Unisphere, what is the default setting of the
Data Reduction feature?
A. OFF for thick LUNs and ON for thin LUNs
B. ON for thin LUNS in an All-Flash pool
C. ON for thick LUNs and of for thin LUNs
D. OFF for thin LUNs in an All-Flash pool
Answer:

42.Two fans have failed on the SPE.


How much time does the Dell EMC Unity system allow before the SP is shut down?
A. 2 min
B. 3 min
C. 4 min
D. 5 min
Answer:

43.What is a characteristic of the iSCSI interface on Dell EMC Unity storage arrays?
A. Only one iSCSI interface can exist on a physical network port at a time
B. IQN aliases are automatically generated
C. A VLAN can only be assigned during the creation of the iSCSI interface
D. IQNs are associated with an iSCSI interface
Answer:

44.What is a consideration when implementing a Thin Clone on a Dell EMC Unity array?
A. Thin Clone can be expanded independently from the Base LUN
B. Data Reduction can be enabled independently on source LUN and on Thin Clone
C. Thin Clone is only supported on physical Dell EMC Unity systems
D. Thin Clone can be created directly from the Base LUN
Answer:

10 / 14
The safer , easier way to help you pass any IT exams.

45.What can be used to initially configure a static management IPv6 address on a Dell EMC Unity array?
A. uemcli
B. sync
C. navisecCLI
D. initCLI
Answer:

46.The soft limit quota for a file system has just been exceeded.
What would you expect to occur concerning data access?
A. If the soft limit remains exceeded and the grace period expires. no new data may be added to the
particular file system or directory
B. Once the soft limit is reached, no new data can be added to the file system or directory
C. If the soft limit remains exceeded and the grace period expires, new data may be added to the particular
directory. The system will alert the grace period expired
D. Once the soft limit is reached, the grace period counts down until the hard limit is reached. New data can
be written as long as the hard limit has not been reached
Answer:

47.A storage administrator is planning to move a NAS Server to the peer SP on a Dell EMC Unity system.
The NAS Server and two of its associated file systems have active asynchronous replication sessions to a
remote Dell EMC Unity system
How should the storage administrator proceed?
A. Set the RPO value to 1440 for the NAS Server and file system replication sessions
B. Failover the replication sessions for the NAS Server and file systems
C. Set the RPO value to 0 for the NAS Server and file system replication sessions
D. Manually pause the replication sessions for the NAS Server and file systems
Answer:

48.A system administrator wants to grant privileges to manage storage resources and host configurations
for some users.
However, the administrator wants to ensure users have no privileges to manage user accounts, change
network settings and NAS Servers, or perform software upgrades.
Which user role should be associated with the user accounts to be created?
A. Storage Administrator
B. Operator
C. Service
D. Administrator
Answer:

49.Which disk format is recommended for Dell EMC Unity's OVA?


A. Thick Provision Eager Zeroed
B. Thin Provision
C. Thick Provision Lazy Zeroed
D. raw

11 / 14
The safer , easier way to help you pass any IT exams.

Answer:

50.What is a consideration when designing a replication solution using the native Dell EMC Unity
replication feature?
A. Asynchronous remote replication supports replication to up to two remote Dell EMC Unity systems
B. Synchronous remote replication supports replication to up to two remote Dell EMC Unity systems
C. Synchronous remote replication supports replication to only one remote Dell EMC Unity system
D. Asynchronous remote replication supports replication to only one remote Dell EMC Unity system
Answer:

51.A system administrator has placed the Storage Processor (SP) in Service mode for maintenance. Using
Unisphere, they notice the mode field for the SP continues to display both SPs as normal
What is another indicator the administrator can check to verify that the SP is in Service mode?
A. DPE Chassis Fault LED is solid amber
B. SP Fault LED is solid blue
C. SP Unsafe to remove LED is lit
D. SP Fault LED blinks alternating amber and blue
Answer:

52.A user needs to re-image a Dell EMC Unity Storage Processor and resume normal operations.
What is the correct sequence of steps to complete this task using Unisphere?

Answer:

53.What is a characteristic of the IP Packet Reflect feature running on a Dell EMC Unity NAS Server?
A. SP must be rebooted after the feature is enabled on the NAS Server
B. Feature can only be enabled when the NAS Server is created via UEMCLI
C. Communications initiated by the array do not require route table lookups
D. Outbound packets use the same interface as the inbound packets
Answer:

54.Which operation can be performed from the FAST VP settings section in the Unisphere Settings
window?
A. Enable scheduled data relocation at the system level

12 / 14
The safer , easier way to help you pass any IT exams.

B. Enable scheduled data relocation for a specific pool


C. Exclude pool from the data relocation schedule
D. View the data relocation progress between tiers
Answer:

55.After performing the initial configuration of a new Dell EMC UnityVSA, when do alerts concerning
license expiration first occur?
A. 7 days prior to expiration
B. 15 days prior to expiration
C. 1 month prior to expiration
D. 2 months prior to expiration
Answer:

56.A storage administrator needs to shrink their FAST Cache. The current configuration consists of eight
200 GB SAS Flash 2 drives.
What is the maximum number of drives that can be removed from FAST Cache through an online shrink
operation?
A. 2
B. 4
C. 6
D. 8
Answer:

57.A storage administrator is tasked with creating a DR solution for block and file storage resources. The
company has multiple regional and international sites containing a mix of physical and virtual Dell EMC
Unity systems.
What are considerations for the storage administrator in creating the DR solution?
A. Synchronous remote replication should be restricted to within 100 km between sites to keep latency
below 10 MS
File and block storage resources can be replicated synchronously and asynchronously
B. Synchronous remote replication should be restricted to within 100 km between sites to keep latency
below 10 MS
Block storage resources can be replicated synchronously and asynchronously
C. Asynchronous replication over long-distance does not impact latency
Asynchronous replication ensures zero data loss to the remote replica in disaster conditions
D. Asynchronous replication ensures zero data loss to the remote replica in disaster conditions
Block storage resources can be replicated synchronously and asynchronously
Answer:

58.On a Dell EMC Unity file system asynchronous replication session, how many system Snapshots, in
total, are required to support replication?
A. 1
B. 2
C. 4

13 / 14
The safer , easier way to help you pass any IT exams.

D. 8
Answer:

59.A company has the following available drive types in their Dell EMC Unity 500 storage array:
- 1.2 TB SAS
- 2 TB NL -SAS
- 100 GB SSD
- 1.6 TB SSD
- 3.8 TB SSD
What combination of drives can the company use to create a storage pool?
A. 1.2 TB SAS and 1.6 TB SSD
B. 2 TB NL-SAS and 3.8 TB SSD
C. 2 TB NL-SAS and 100 GB SSD
D. 1.6 TB SSD and 3.8 TB SSD
Answer:

60.What are characteristics of the file system Snapshot Copy operation?


A. Parent can be a read-only or read/write snapshot
Copy will be a read-only Snapshot
Has an independent Retention Policy from the parent
B. Parent can only be a read-only Snapshot
Copy will be a read-only Snapshot
Has an independent Retention Policy from the parent
C. Parent can be a read-only or a read/write Snapshot
Copy will be a read/write Snapshot
Inherits the parent Retention Policy
D. Parent can only be a read-only Snapshot
Copy will be a read/write Snapshot
Inherits the parent Retention Policy
Answer:

61.Which protocols are supported by Dell EMC UnityVSA for storage provisioning?
A. iSCSl, NPS, and SMB
B. iSCSl and FC only
C. iSCSl and SMB only
D. FC, NFS, and iSCSl
Answer:

14 / 14

You might also like