Valves and Unit Injectors, Adjustment - Fuel Injection - Nut (Hardware) PDF
Valves and Unit Injectors, Adjustment - Fuel Injection - Nut (Hardware) PDF
Valves and Unit Injectors, Adjustment - Fuel Injection - Nut (Hardware) PDF
Saved Info Embed Print
Loosen the fresh air pipe to air compressor hose clamp
and reposition out of the way.
6
Remove the fresh air pipe from the air compressor tube.
W2004719
7
Unplug the air temperature sensor wiring harness
connector. First, remove the lock tab, then separate the
connector from the sensor. Remove the wire harness
clamp.
W2004720
D
Volvo Trucks North America Date Group No. Page
Service Bulletin 7.2007 214 52 5(17)
8
Loosen the clamp from the main fresh air pipe to the
turbocharger. Pull the pipe away from the turbocharger
and air compressor fresh air pipe.
W2004721
9
Loosen the two upper bolts at the top of the air filter
housing.
W2003858
10
Lift the air filter housing (with fresh air pipe attached)
away from the cab.
W2003859
11
Disconnect the breather tube from the side of the valve
cover.
W2004680
D
Volvo Trucks North America Date Group No. Page
Service Bulletin 7.2007 214 52 6(17)
12
Remove the engine wiring harness support bracket from
the front of the valve cover.
W2004679
13
Remove the spring- loaded attaching bolts from the
valve cover.
This document is...
Useful Not useful
T2020552
14
Lift and remove the valve cover.
15
Assemble the flywheel turning tool as follows:
Remove the snap ring and gear from tool 9996956.
Assemble the
85108855 andgear from
install the9996956 into
snap ring. adaptergear
Lubricate tool with
Search
engine oil or grease before attempting to turn the flywheel.