Security Shutters Ltd.

Roller Shutter Manufacture and Installation Barricade Collapsible Gate

Barricade grilles are a horizontally-folding,

fully retractable security system. They are
exceptionally strong barriers that offer very
good visibility when locked.

The grilles are locked in multiple places with a single

key, run on a smooth carrier system and can be custom
built to suit almost any opening. They are quick and easy
to use. For wider openings, we can install multiple
sections of grilles.

Also available in an insurance-approved version.

Key features

 Pre-galvanised and powder-coated

 Folds away neatly when not in use
 A visual deterrent that lets in lots of light

A strong horizontally-sliding grille with very good visibility

Suitable for

 Domestic premises
 Office windows
 Shopfront window displays

HVP Security Shutters - over 25 years of experience Tel: +44 (0)1392 270 218 Fax: +44 (0)1392 278 548 Email: [email protected] Web: www.hvpshutters.co.uk
Technical specification Barricade Collapsible Gate
Sideways folding collapsible gate.

We have done our best to ensure the information on this brochure is accurate. We do, however, reserve the right to change specification without prior notice.
Construction:
Manufactured from all galvanised, high grade steel and supplied in 'X' lattice as
standard or 'S' lattice as an option. Top-hung on nylon coated steel bearings.
Optional folding bottom track. Strong steel lattice with smooth durable finish.

Operation:
Manual operation.

Locking Options:
Two point locking (four point for the insurance approved version) from a single key
with the lock mechanism shielded by a steel plate. Overlapped locking profiles.

Finish:
All galvanised steel construction. Polyester powder coated to a range of RAL
colours.

Size guide:
• Maximum Height: 3500mmH ( insurance approved version 3000mmH )
• Minimum Height: 500mmH ( insurance approved version 1000mmH )
• Maximum Width ( bi-parting ): 6000mmW
• Minimum Width ( bi-parting ): 1000mmW
• Maximum Width ( single sash ): 3000mmW
• Minimum Width ( single sash ): 500mmW
• An unlimited width can be accommodated in sections

Weight and Stacking:

19kgm2 nominal. An unlimited width can be accommodated with multiple sashes.
Sashes to be made in single pieces up to 2m wide. Larger sizes to be made in
sections for assembly on site, ensuring the weight of each section can be handled
safely. Gates wider than 4m will be supplied with the top track in two pieces, with
the split in the middle. Where two split sashes meet, two pickets are joined
together using bolts and fixing plates.

Insurance approved version (optional):

As above with the following changes:
• Lattice assembly system to utilise high grade steel screws;
• Gate to be independently tested and approved to Loss Prevention Standard
(LPS) 1175 Security Rating Classification 1;
• Gate to carry the LPCB mark on a metal plate fixed to the outside of the
product;
• Gate to be installed in accordance with the requirements of LPS 1175.

HVP Security Shutters - over 25 years of experience Tel: +44 (0)1392 270 218 | Fax: +44 (0)1392 278 548 | Email: [email protected] More on www.hvpshutters.co.uk