东莞市锐博自动化设备有限公司

DongGuan Ruibo Automation Equipment co., Ltd

HIH620分板机设备方案资料
Sub-board Machine Data Sheet
1 Product show
2 Inside Structure

The whole machine has four-axis full

servo control system to improve the
efficiency and stability of the machine.
3 Application
手机主板 电源板 U盘

铜基板 铝基板
4
Function Description
1. HiH-F620 is a device that uses a milling cutter to run a high-speed multi-piece PCB board according to a pre-edited path. It replaces the cutting of artificial
break, C-CUT or PUSH to improve the quality of the product and reduce the scrap rate.
2. This machine adopts man-machine interface Windows 7 operating system, concise and user-friendly interface design, automatic cutting path correction system,
high-pixel CCD programming and block program and single-step program editing and modification.
3. The loading and unloading device of the PCB working on the two platforms can effectively reduce the idle time of the machine and achieve the ideal production
efficiency.
4. It is equipped with a high-pixel CCD magnifying lens, auxiliary program teaching and editing functions, higher precision and more accurate, and clearer images.
5. Automatic MARK point positioning correction system, real-time display and analog route tracking of moving path, display at a glance, automatic alignment
correction function, cutting precision is higher, PCB can be rotated within the range of 3mm, machine vision can be carried out Automatic route correction relaxes
the operator's accuracy requirements when placing the board. Greatly improved work efficiency.
6. Program left and right workbench copy, block copy, array, multi-angle link copy, single-step tracking modify function, block edit and modify function, which
simplifies the programming time and improves programming efficiency.
7. The vacuum cleaner made by high-power imported fan and the high-voltage static elimination device of 10V make the vacuuming effect more ideal and the noise is
smaller.
8. Tool life monitoring, the milling cutter will automatically rise and fall to the position of another uncut cutting edge after cutting the distance. The upper and lower
distance and the number of times can be set according to the length of the cutting edge to extend the life of the milling cutter.
9. Provide imported spindles and domestic spindles to meet different customer needs.
6 Equipment double station advantage
The use of two mobile platforms as the switching upper and lower substrate devices of the PCB can effectively reduce the
idle time of the machine, achieve higher production efficiency, and increase the production capacity to 3 to 4 times of the
artificial sub-board.

地址：東莞市寮步镇鑫瑞工业园（聚园二路东） TEL:0769-33392002 FAX:0769-23072263 专利保护仿制必究

5 Software compensation function advantage
1. Automatic MARK positioning correction system, moving path display tracking, auto focus correction function, cutting precision is higher, to
meet higher precision products.
2. The automatic alignment correction function has higher cutting precision. As long as the PCB is deflected within the range of 80mm2,
machine vision can perform automatic route correction, which relaxes the operator's accuracy requirements when placing the board. Greatly
improved work efficiency

Reference
position

Off
position

地址：東莞市寮步镇鑫瑞工业园（聚园二路东） TEL:0769-33392002 FAX:0769-23072263 专利保护仿制必究

6 Software programming is easy to learn and understand
1. Program teaching can be manual and teach input, with import and export, link copy, path copy edit and modify function, which
can simplify the programming. The left and right workbench programs can be copied to save programming time. The cursor takes
the point programming mode, which greatly improves the programming efficiency and reduces the programming time.
2. CAD can be converted into DXF and imported directly into programming.

地址：東莞市寮步镇鑫瑞工业园（聚园二路东） TEL:0769-33392002 FAX:0769-23072263 专利保护仿制必究

7 Point image

device has Mar point automatic calibration function

地址：東莞市寮步镇鑫瑞工业园（聚园二路东） TEL:0769-33392002 FAX:0769-23072263 专利保护仿制必究

8 Equipment parameter configuration table 1
(overview) 1250mm*1155mm*1265mm
I. Hardware（硬件）
Equipment size 550KG
Spindle Domestic spindle and inverter / imported spindle (optional) Weight 60~110mm
Adjustable height of the
CCD CCD (SONY 540X) series industrial camera foot
Lens Computar EX2C Panasonic MINAS A5 Series
Screw THK imported precision grinding screw Manipulating motor ±0.01mm
guide TBI imported linear widened rail type
Manipulating motor )
servo motor Panasonic A5 repeatability
I/O control card ADLINK PCI-9074 Workbench Fixture positioning, universal thimble positioning, visual
Motion control card ADLINK PCI-9074 multi-axis control card correction
Board positioning Workbench automatic feeding, cylinder pushing and motor
Riser card BOXIN-B01 type method drive (customer optional)
Industrial control host Industrial control host Upper and lower board 400mm*450mm
mode
monitor DETT LCD LCD17" display and Logitech mouse / Maximum size of the 0.5mm~5mm
Shuangfeiyan mouse board
Plate thickness
.software
Spindle 400W
Control System Windows7 Professional (Service3, v.3244) Power 60000rpm/min
Operation interface Chinese Windows7 Maximum spindle Naturally cold and air cooled
program Online mode speed
visual system Pixel calculation type high precision CCD vision positioning Cooling method Special wrench replacement
correction system (independent development) Replacement method 1250mm*1155mm*1265mm
controlling software F 1.2。88 正试版 550KG
Cutting speed 0-100mm/s

地址：東莞市寮步镇鑫瑞工业园（聚园二路东） TEL:0769-33392002 FAX:0769-23072263 专利保护仿制必究

9 Equipment parameter configuration table 2

Axis position accuracy ±0.01mm

Three-color light High-brightness tri-color lights monitor the various working
Sub-board cutting ±0.036mm conditions of the machine
precision
Tool quality detection Automatic tool life detection, time detection
Filter system power 2.2KW/3.5KW 380V motor (optional) Motor overheat With overheating, overload, low voltage and other protection
filter Vertical detection functions
Servo overload Protection function with overload, normal line, low voltage,
detection etc.
Tool life tracking Automatic tool life detection,
Power 2KW AC220V
Air supply 4-6KG/cm2 Sub-board counting Sub-board model, sub-board counting, and diverse counting
methods.
(program) Machine error record The software automatically remembers all alarm records of
Programming mode Online programming the machine

Editing function Straight line, diagonal line, round orphan, round

Program storage Choose a storage location as needed Working range Four-sided seal protection
protection cover
Configuration Computar series high pixel color CCD emergency stop button Workbench
programming CCD
Tool diameter automatic
compensation
Filter settings Automatically clean the filter and concentrate dust to the dust
collector every time it is processed

地址：東莞市寮步镇鑫瑞工业园（聚园二路东） TEL:0769-33392002 FAX:0769-23072263 专利保护仿制必究

10 Our Customers