Scribd
Upload
90 views4 pages

Solving Reader Connection Issues - TagMatiks Asset Tracking Lite

RFID4U - TagMatiks Asset Tracking Lite | This Article covers the debugging steps to rectify potential connection issues with an RFID reader in Tagmatiks AT Lite Application

Uploaded by

RFID4U Store
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
90 views4 pages

Solving Reader Connection Issues - TagMatiks Asset Tracking Lite

RFID4U - TagMatiks Asset Tracking Lite | This Article covers the debugging steps to rectify potential connection issues with an RFID reader in Tagmatiks AT Lite Application

Uploaded by

RFID4U Store
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

KNOWLEDGE ARTICLE TAGMATIKS AT LITE

V 1.1 APRIL 2019

Article Number: TMATL_1023


Revision Date: April 15th,2019

Solving Reader Connection Issues TagMatiks AT Lite.

Summary:
This article contains debugging steps to rectify potential connection issues with an RFID reader.
Prerequisite: Bluetooth should be available in the desired Windows PC and RFID reader with
Bluetooth device.
Please ensure Bluetooth is turned on in Windows.

Fig 01: Bluetooth - Add a Device

TagMatiks AT Lite
1
KNOWLEDGE ARTICLE TAGMATIKS AT LITE
V 1.1 APRIL 2019

Steps To Followed For Turn On Bluetooth

Select the Start button, then select Settings > Devices > Bluetooth &
other devices . Make sure Bluetooth is turned on. If you're using a laptop with a Bluetooth
switch, make sure the switch is turned on.

Fig 02: Add Bluetooth Device

Click on the desired RFID device to pair with your PC.

Fig 03: Add a Device

TagMatiks AT Lite
2
KNOWLEDGE ARTICLE TAGMATIKS AT LITE
V 1.1 APRIL 2019

After pairing the device, your PC will show its as paired and we can use the reader for
connecting in TagMatiks AT Lite application

Fig 04: Device Paired

TagMatiks AT Lite
3
KNOWLEDGE ARTICLE TAGMATIKS AT LITE
V 1.1 APRIL 2019

Fig 05: Bluetooth Settings Profiles and COM Ports Settings

Connect Reader with AT Lite Application.

Open TagMatiks AT Lite and Go to Settings → Reader. Select the available device from
the List.

Select the Port No/Unit available and click OK.

Fig 06: List of the Readers

TagMatiks AT Lite
4

You might also like