Scribd
Upload
87 views4 pages

Pairing RFID Reader in Windows Via Bluetooth

RFID4U - TagMatiks Asset Tracking Lite | This article explains how to connect the rfid reader in windows through bluetooth device setting by enabling Bluetooth connection in PC.

Uploaded by

RFID4U Store
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
87 views4 pages

Pairing RFID Reader in Windows Via Bluetooth

RFID4U - TagMatiks Asset Tracking Lite | This article explains how to connect the rfid reader in windows through bluetooth device setting by enabling Bluetooth connection in PC.

Uploaded by

RFID4U Store
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

KNOWLEDGE ARTICLE TAGMATIKS AT LITE

V 1.1 APRIL 2019

Article Number: TMATL_1002


Revision Date: April 15th,2019

Pairing RFID Reader in Windows via Bluetooth


Summary :
This Article explains pairing an RFID reader in Windows via Bluetooth with TagMatiks
Asset Tracking Lite Software.

Prerequisite: Enable Bluetooth for both PC & RFID Readers . Supportive drivers may need to be
installed.

This step is required before connecting an RFID Reader in TagMatiks AT Lite.

Step 1: Add Bluetooth Device to the computer.

Fig No. 01. From the Start Menu, select Settings. Then in the Settings window, select Devices.

TagMatiks AT Lite
1
KNOWLEDGE ARTICLE TAGMATIKS AT LITE
V 1.1 APRIL 2019

From the Devices window, select Bluetooth & other device submenus. Then click on the
Add Bluetooth or other device option, as shown in Figure 02.
Make sure that Bluetooth is turned ON.

Fig No 02. Bluetooth & Other devices

Another window will open to add a device. Select Bluetooth from this window. Then all
the Bluetooth devices in range will be displayed, similar to Figure 03. Be sure that the RFID
reader is turned ON.

Fig No 03. Add a Device

TagMatiks AT Lite
2
KNOWLEDGE ARTICLE TAGMATIKS AT LITE
V 1.1 APRIL 2019

Select your reader on this list. Allow time for the connection and pairing process to
complete. When finished, your reader has been paired to the computer and is ready to be used
by TagMatiks Asset Tracking Lite. This is typically a one time process, unless you need to repair
the Bluetooth device.

Fig No 04. Successfully Paired

TagMatiks AT Lite
3
KNOWLEDGE ARTICLE TAGMATIKS AT LITE
V 1.1 APRIL 2019

Step 2: Determine the Outgoing COM Port for the reader.

TagMatiks Asset Tracking Lite needs to know which Outgoing COM Port is used to
communicate with the paired reader. This can be found in the Bluetooth Settings.
From the Start Menu, select Settings. In the Settings window, select Devices.
In Devices window, select Bluetooth & other device submenus.
Then find the option called “More Bluetooth Options” as seen in Fig 05 and click on
Bluetooth Settings option.
Within the Bluetooth Settings window, select the COM Ports tab. Determine the COM
port number that matches the paired reader and Outgoing Port direction, as shown in Fig 05.

Fig No 05. Bluetooth Settings

Remember this COM port number for the following steps! This COM port number should not
change for this reader and it can be recorded for future use. At this point, the Settings window
can be closed.

TagMatiks AT Lite
4

You might also like