Data sheet 3RT1024-1AB00

Power contactor, AC-3 12 A, 5.5 kW / 400 V 24 V AC, 50 Hz, 3-pole

Size S0 Screw terminal !!! Phased-out product !!! Successor is
SIRIUS 3RT2 Preferred successor type is >>3RT2024-1AB00<<

Product brand name SIRIUS

Product designation power contactor

General technical data

Size of contactor S0
Degree of pollution 3
Protection class IP
● on the front IP20
● of the terminal IP00
Mechanical service life (switching cycles)
● of contactor typical 10 000 000
● of the contactor with added electronics- 5 000 000
compatible auxiliary switch block typical
● of the contactor with added auxiliary switch 10 000 000
block typical
Reference code acc. to DIN EN 81346-2 Q

Ambient conditions
Installation altitude at height above sea level

3RT1024-1AB00 Subject to change without notice

Page 1/7 06/07/2019 © Copyright Siemens
 ● maximum 2 000 m

Main circuit
Number of poles for main current circuit 3
Number of NO contacts for main contacts 3
Number of NC contacts for main contacts 0
Operating current
● at AC-1 at 400 V
— at ambient temperature 40 °C rated value 40 A
● at AC-1
— up to 690 V at ambient temperature 40 °C 40 A
rated value
— up to 690 V at ambient temperature 60 °C 35 A
rated value
● at AC-3
— at 400 V rated value 12 A
● at AC-4 at 400 V rated value 12.5 A
Operating current
● at 1 current path at DC-1
— at 24 V rated value 35 A
— at 110 V rated value 4.5 A
● with 2 current paths in series at DC-1
— at 24 V rated value 35 A
— at 110 V rated value 35 A
● with 3 current paths in series at DC-1
— at 24 V rated value 35 A
— at 110 V rated value 35 A
Operating current
● at 1 current path at DC-3 at DC-5
— at 24 V rated value 20 A
— at 110 V rated value 2.5 A
● with 2 current paths in series at DC-3 at DC-5
— at 24 V rated value 35 A
— at 110 V rated value 15 A
● with 3 current paths in series at DC-3 at DC-5
— at 24 V rated value 35 A
— at 110 V rated value 35 A
Operating power
● at AC-1
— at 400 V rated value 23 kW
● at AC-2 at 400 V rated value 5.5 kW
● at AC-3

3RT1024-1AB00 Subject to change without notice

Page 2/7 06/07/2019 © Copyright Siemens
 — at 400 V rated value 5.5 kW
— at 500 V rated value 7.5 kW
— at 690 V rated value 7.5 kW
Power loss [W] at AC-3 at 400 V for rated value of 0.5 W
the operating current per conductor

Control circuit/ Control

Type of voltage of the control supply voltage AC
Control supply voltage at AC
● at 50 Hz rated value 24 V
Control supply voltage frequency
● 1 rated value 50 Hz
Operating range factor control supply voltage rated
value of magnet coil at AC
● at 50 Hz 0.8 ... 1.1
Apparent pick-up power of magnet coil at AC 61 V·A
Inductive power factor with closing power of the coil 0.82
Apparent holding power of magnet coil at AC 7.8 V·A
Inductive power factor with the holding power of the 0.24
coil

Auxiliary circuit
Number of NC contacts for auxiliary contacts
● instantaneous contact 0
Number of NO contacts for auxiliary contacts
● instantaneous contact 0
Operating current at AC-12 maximum 10 A
Operating current at AC-15
● at 230 V rated value 6 A
● at 400 V rated value 3 A
Operating current at DC-12
● at 60 V rated value 6 A
● at 110 V rated value 3 A
● at 220 V rated value 1 A
Operating current at DC-13
● at 24 V rated value 10 A
● at 60 V rated value 2 A
● at 110 V rated value 1 A
● at 220 V rated value 0.3 A
Contact reliability of auxiliary contacts 1 faulty switching per 100 million (17 V, 1 mA)

Short-circuit protection
Design of the fuse link
● for short-circuit protection of the main circuit

3RT1024-1AB00 Subject to change without notice

Page 3/7 06/07/2019 © Copyright Siemens
 — with type of coordination 1 required fuse gL/gG: 63 A
— with type of assignment 2 required fuse gL/gG: 25 A
● for short-circuit protection of the auxiliary switch fuse gL/gG: 10 A
required

Installation/ mounting/ dimensions

Mounting type screw and snap-on mounting onto 35 mm standard mounting rail
according to DIN EN 50022
● Side-by-side mounting Yes
Height 85 mm
Width 45 mm
Depth 91 mm
Required spacing
● for grounded parts
— at the side 6 mm

Connections/Terminals
Type of electrical connection
● for main current circuit screw-type terminals
● for auxiliary and control current circuit screw-type terminals
Type of connectable conductor cross-sections
● for main contacts
— solid 2x (1 ... 2.5 mm²), 2x (2.5 ... 6 mm²), max. 2x 10 mm²
— single or multi-stranded 2x (1 ... 2,5 mm²), 2x (2,5 ... 6 mm²), max. 2x 10 mm²
— finely stranded with core end processing 2x (1 ... 2.5 mm²), 2x (2.5 ... 6 mm²)
● at AWG conductors for main contacts 2x (16 ... 12), 2x (14 ... 10), 1x 8
Type of connectable conductor cross-sections
● for auxiliary contacts
— solid 2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²), max. 2x (0.75 ... 4 mm²)
— finely stranded with core end processing 2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²)
● at AWG conductors for auxiliary contacts 2x (20 ... 16), 2x (18 ... 14), 1x 12

Certificates/approvals

3RT1024-1AB00 Subject to change without notice

Page 4/7 06/07/2019 © Copyright Siemens
 General Product Approval Functional Declaration of
Safety/Safety Conformity
of Machinery
Type Examination
Certificate

Declaration of Test Certificates Marine / Shipping

Conformity
Miscellaneous Special Test Certi- Type Test Certific-
ficate ates/Test Report

Marine / Shipping other Railway

Miscellaneous Confirmation Special Test Certi-
ficate

Further information
Information- and Downloadcenter (Catalogs, Brochures,…)
http://www.siemens.com/industrial-controls/catalogs
Industry Mall (Online ordering system)
https://mall.industry.siemens.com/mall/en/en/Catalog/product?mlfb=3RT1024-1AB00
Cax online generator
http://support.automation.siemens.com/WW/CAXorder/default.aspx?lang=en&mlfb=3RT1024-1AB00
Service&Support (Manuals, Certificates, Characteristics, FAQs,...)
https://support.industry.siemens.com/cs/ww/en/ps/3RT1024-1AB00
Image database (product images, 2D dimension drawings, 3D models, device circuit diagrams, EPLAN macros, ...)
http://www.automation.siemens.com/bilddb/cax_de.aspx?mlfb=3RT1024-1AB00&lang=en
Characteristic: Tripping characteristics, I²t, Let-through current
https://support.industry.siemens.com/cs/ww/en/ps/3RT1024-1AB00/char
Further characteristics (e.g. electrical endurance, switching frequency)
http://www.automation.siemens.com/bilddb/index.aspx?view=Search&mlfb=3RT1024-1AB00&objecttype=14&gridview=view1

3RT1024-1AB00 Subject to change without notice

Page 5/7 06/07/2019 © Copyright Siemens
 86

45 62

28 5 38

35

SIEMENS 48 5
69

72

60
85

3RT1024-1AB00 Subject to change without notice

Page 6/7 06/07/2019 © Copyright Siemens
 -Q A1 1 /L1 3 /L2 5 /L3

A2 2 /T1 4 /T2 6 /T3

last modified: 06/07/2019

3RT1024-1AB00 Subject to change without notice

Page 7/7 06/07/2019 © Copyright Siemens