www.goh-gmbh.

de
 Behälter- und Anlagenbau · Filtertechnik

Contents

From Dreis-Tiefenbach to the world – GOH GmbH…………………………………… 06

Family-run company with global reach……………………………………………… 07
Competence from a single source…………………………………………………… 09
Our services………………………………………………………………………… 10
Product divisions…………………………………………………………………… 14
Vessel and equipment construction…………………………………………………… 15
Plant construction…………………………………………………………………… 18
Spherical resonators and pulsation dampers………………………………………… 22
Filters and filter housings …………………………………………………………… 26
Piping systems and valve housings…………………………………………………… 28
Customized and specialty products…………………………………………………… 30
Layout, design and fabrication from a single source…………………………………… 32
Power plant engineering …………………………………………………………… 32
Manufacturing capabilities…………………………………………………………… 34
Materials and welding methods……………………………………………………… 35
Approvals and certificates…………………………………………………………… 36
References…………………………………………………………………………… 37
How to find us / Contact…………………………………………………………… 38

Imprint

Published by:
GOH Behälter- und Anlagenbau GmbH
Lützelau 8
D-57250 Netphen

Typesetting and layout: vh-crossmedia | Volker Heupel

Text: text affairs | Ute Reuschenberg
Translation: Context Gesellschaft für Sprachen- und Mediendienste mbH, Köln
Photo: Fotolia, Victor Pogontsev

Photos: Title page: Fotolia, christian42; Inside pages: GOH GmbH, see individual credits

Printing:
BERK DRUCK GmbH
Oderstraße 5-7
D-53879 Euskirchen

03
 Headquarters of GOH Behälter-
und Anlagenbau GmbH in
Dreis-Tiefenbach near Siegen,
Germany.

n 10,000 square meters

(110,000 ft2) of company
grounds with 4,500 square
meters (50,000 ft2) of
production area
Photo: Bavaria Luftbild Verlags GmbH

04 05
 From Dreis-Tiefenbach Family-run company
to the world – GOH GmbH with global reach
Brief portrait with facts and figures Allow us: GOH GmbH

Who we are What we make GOH GmbH is a medium-sized, family-run And our customer base is just as diverse
company headquartered in Dreis-Tiefen- as the range of products and services
n GOH Behälter- und Anlagenbau GmbH n Tanks and plants bach, Germany. Where is that, you ask? we offer. The spectrum extends from the
in Dreis-Tiefenbach near Siegen, n Filter housings, valve housings Near Siegen, which is right in the middle world’s leading compressed air treatment
Germany, founded in 1998 and equipment of Siegerland, a region with a long, rich companies and plant construction firms to
n 45 employees there n Piping system components tradition associated with the iron and steel the chemical and pharmaceutical industries
n About 4,500 square meters (nearly industry. This is where our roots are, and and aerospace. We supply precision-fit
50,000 ft2) of production area while we affirm our loyalty to that tradition, solutions perfectly adapted to the
Who we work for
the signposts clearly point toward customer’s needs.
n GOH Filtertechnik founded in
n Compressed air industry expansion: we started out with “just” ten
Stadtallendorf, Germany, in 2005 Expanding our range of products and
n Hydraulic storage vessel, 160 bar experienced employees and a production n Using state-of-the-art CAD
n 40 employees there n Chemical and petrochemical industry services in 2005, we added high-quality
(2320 psi), for a seawater power area of approximately 1,500 square meters software, we create the detailed
plant in the Atlantic. n About 4,000 square meters n Automotive industry filtration engineering at a second location design drawings for production.
(16,000 ft2), so today our team of about
(43,000 ft ) of production area
2
n Aerospace in Stadtallendorf, near Marburg, Germany.
85 colleagues at two locations is more
This also enabled us to establish GOH
n International approvals n Power plant engineering than eight times the size – and the area
GmbH as a supplier of reactor vessels
n Gas and solar engineering
has grown by more than a factor of six to
for power plants. And then in 2007 we
nearly 9,000 square meters (100,000 ft2).
n Drinking water supply began manufacturing primary components
n Pharmaceutical industry Our core competence: the construction for valve systems used in gas and solar
of plants, tanks, filters and piping system engineering.
components – in all sizes, in steel and
But not only are we continuously expan-
stainless steel.
ding our product portfolio – our sphere of
operations also continues to grow. Whe-
n Bills of material and drawings
ther in China or in the USA: our quality accompany the fabrication of the
products are now used all over the world. plants and equipment.

n Reboiler for a CO2 production unit, n Metal-edge filters for cleaning and filtering seawater –
n Truck transport of a complete filtration unit for compressed air DN 2900 (116“ dia.) made of 1.4710 super duplex stainless steel

06 07
 Stadtallendorf Industrial Park –
Headquarters of GOH Filter-
technik GmbH.

n About 4,500 square

meters (nearly 50,000 ft2)
of production area
Photo: private

08 09
 Competence from a single source Our services
Full-service reliability – highest quality standards Manual work tailored to fit – from the smallest component
to the largest XXL-size plant

Deutsch

What drives us? The continuous improvement of all processes and products Our tanks and equipment, filters and processing units are made according to the
Trust is good,
Z E R T I F I K AT and our customer-focus: Because we offer you full service from a single source – strict requirements of German and international pressure vessel regulations.
control is better
für das Managementsystem nach from the analysis of needs all the way to international acceptance. No more
DIN EN ISO 9001:2000

and no less. In this context we supply both individual We not only supply manual work tailored
Der Nachweis der regelkonformen Anwendung wurde erbracht
GOH has the work and process
system components and complete units. to fit, but we also offer you as much
und wird gemäß TÜV CERT-Verfahren bescheinigt für

GOH-Filtertechnik GmbH
Scharnhorststraße 7
qualifications for all of the
At the lowest possible cost, but also with All of this, together with the use of state- No matter whether it involves carbon steel, service as you need: we also provide all
D-35260 Stadtallendorf

materials that it processes.

Geltungsbereich

Konstruktion, Herstellung und Vertrieb von

maximum reliability and quality. To that of-the-art technologies, forms our solid, stainless steel or aluminum, both mate- of the necessary detail design drawings
Druckbehältern und Drucksystemen
end, we apply for all required approvals, reliable foundation. rial selection and dimensions are perfectly on request, for example – always in close Our employees are not only
observe all regulations and requirements, tailored to meet the customer’s needs. collaboration with your technical depart- qualified and repeatedly tested,
Zertifikat-Registrier-Nr. 73 100 2137
Audit-Bericht-Nr. 4172 6001
Gültig bis 7. November 2010

And because we are an owner-managed

prepare the relevant translations, and ments, of course. they generally also have many
company with flat hierarchies, you also We have acquired a large number of
TÜV CERT-Zertifizierungsstelle
des TÜV Hessen Darmstadt, den 8. November 2007

monitor and optimize every phase from

-Der Zertifizierungsstellenleiter-

years of experience in tank, plant

benefit from our fast decision-making and approvals according to an extremely wide A large number of accessory components
Diese Zertifizierung wurde gemäß TÜV CERT-Verfahren durchgeführt und wird regelmäßig
überwacht. Die aktuelle Gültigkeit ist nachprüfbar unter www.tuev-club.de.

fabrication to final inspection on an ongo-

TÜV Technische Überwachung Hessen GmbH, Rüdesheimerstr. 119, D-64285 Darmstadt.

and equipment construction.

short communication channels. Contact us range of regulations, and it goes without complement our portfolio: we also produce
ing basis.
TGA -ZM-20-96-00 Seite 1 / 1
for more information. saying that we can also produce products the corresponding frames, base frames, And last but not least:
We are firmly convinced that only a and have them accepted according to all of substructures and personnel platforms for in the tried-and-true Siegerland
n Indispensable prerequisite: motivated team can achieve extraordinary those regulations. all tanks, equipment and filters. tradition, in all of our products
the DIN ISO 9001 quality standard performance. That’s why our employees’ we process only high-quality
strong sense of individual responsibility steel from certified suppliers.
is the basis for continuous improvement Our fabrication methods satisfy
in all areas. That includes not only regular the most demanding require-
advanced training programs, but also ments and pass the strictest
investments in machines and equipment inspections. We manufacture our
installations, which enable us to maintain products according to the latest
high manufacturing quality standards. international standards.
GOH GmbH also guarantees seamless
quality assurance, from incoming goods
reception all the way through to shipping.
Indispensable prerequisite: the DIN ISO
9001 quality standard. This is just as
much of a cornerstone of our company
as the recognized expertise in fabrication
methods.

Only the best is

good enough for us:

Photo: dievirtuellecouch.net
quality products
Full service from which satisfy the
A for „approvals“ most demanding
to Z for „zinc alloys“ n The owners of GOH GmbH: standards.
Gunther and Olaf Heupel

10 11
 Olaf and Gunther Heupel –
the managing directors
of GOH GmbH.

This adsorption-drying unit has

a footprint of 9 by 20 meters
(30 x 65 ft) and a height of
7.5 meters (25 ft).
Photo: dievirtuellecouch.net

12 13
 Product divisions Vessel and equipment construction
Any type of special tank? No problem. Tell us what you need!

The products we make, which comply We produce components for the following
with the requirements of German and areas:
international pressure vessel regulations,
n Compressed air industry
are available in all sizes, vertical or hori-
zontal, for liquids, gases or solids. n Chemical and petrochemical industry
n Automotive industry
n Aerospace
n Power plant engineering
n Gas and solar engineering
n Drinking water supply
n Pharmaceutical industry

n Grease/water separation tank made

of 1.4571 stainless steel with elongated
sight glasses

14 15
 Vessel and equipment construction Vessel and equipment construction

n Below: Vessel made of P 355 NL1 steel shown

before annealing and surface treatment and then
ready for shipment

n Vertical storage and agitation tank, DN 2600

(102“ dia.), made of 1.4571 stainless steel
for the paint industry

16 17
 Plant construction
Always focused on the customer, GOH GmbH also offers complete plants.

The choice is yours: our product portfolio ranges from tanks, filters, piping
systems and hydraulic units to insulation and electrical components.

Along with the conventional fabrication of These plants are produced in an extremely
a number of separate components, we also wide variety of materials and dimensions.
supply our customers with a wide range
And because they are operated by our
of complete units which can be delivered
customers all over the world, the plants
as separate elements or pre-assembled
we produce and their acceptance testing
modules, or even as completely assembled
comply with many different standards.
systems.

n After assembly and acceptance,

a technician completes the final
electrical installation and insulation.

Photo: BEKO Systems GmbH Neuss

Photo: BEKO Systems GmbH Neuss

Our employees during

assembly and final inspection
of a compressed air unit, with
subsequent test run. n XXL adsorption dryers for compressed air treatment with a rated capacity of nearly 100 tons.

18 19
 Plant construction Plant construction

n Examples of plants made of steel and stainless steel –

sand blasted, primed, painted and insulated

Photo: BEKO Systems GmbH Neuss

Photo: BEKO Systems GmbH Neuss

20 21
 Spherical resonators
Spherical resonators and pulsation dampers

and pulsation dampers n We fabricate spherical resonators

made of ferritic and austenitic
stainless steels with diameters
ranging from DN 300 to DN 1800
(12“ to 72“) and wall thicknesses
Custom fabrication for highly demanding pressure vessel applications from 10 to 150 mm (0.4“ to 6“) for
rated pressures of up to 2000 bar
(29,000 psi).
Our large range of products and
services also includes the fabrication
of spherical resonators. This is a par-
ticularly challenging task in pressure
vessel construction, because the heavy
wall thicknesses require extremely high
quality standards and perfect welds –
right from the very beginning.

n Spherical resonators during pressure testing.

22 23
 Spherical resonators and pulsation dampers Spherical resonators and pulsation dampers

n Pulsation damper made of 1.4462

stainless steel with heating coils made
of 1.4541 stainless steel – pickled,
passivated and glass bead blasted.

n For all sizes and wall thicknesses, we use submerged

arc welding as much as possible when fabricating
our spherical resonators. They then undergo the
required non-destructive testing followed by
final inspection in cooperation with the
competent authority, whose approval
clears the way for final surface treatment
and shipping.

n Spherical resonators with heating coils.

24 25
 Filters and filter housings
Filters and filter housings

We develop perfectly matched filtration units for you

More and more control systems for manufacturing processes

require filtration units to supply clear compressed
air, for example.

Drying units which, depending on the process,

are suitable for atmospheric nitrogen or
other media can be a good solution.

For conditioning and capturing

moisture, these units use a
drying medium of various
grain sizes and qualities
which can be regener-
ated by evaporation.

n Filters and filter housings in

different configurations.

26 27
 Piping systems and valve housings
Piping systems and valve housings

The full product range – for all pressure ratings

and in all material grades

We fabricate piping systems according to your specifications for all pressure

ratings and in all material grades: in accordance with EN 10025, DIN EN 10028-

Photos (3): Wolfgang Röhrig

2+3, DIN 17440 and VdTÜV information sheets along with material standards
from outside of Germany for conventional use in chemical and petrochemical
applications, district heating and HVAC and for municipal plants, pipe fittings
(tees and eccentric and concentric reducers), branches, segmented bends and
complete piping systems with flanged connections.

Photo: BEKO Systems GmbH Neuss

n Three-way reactor control valves, DN 1500 (60“ dia.),

for temperatures of up to 1200°C (2200°F)

28 29
 Customized and specialty products
n Aluminum filter housing Customized and specialty products
for kerosene filtration

Special requirements – flexible solutions!

One of our company’s greatest strengths is the flexibility with which we plan,
design and manufacture specialty products in cooperation with our customers.

n Four-way hot gas mixing valve, n A selection of special tanks and equipment
DN 3200 (128“ dia.) for our customers in the chemical and
pharmaceutical industries

30 31
 Layout, design and fabrication Power plant engineering
from a single source GOH Filtertechnik – recognized as a “TOP SUPPLIER”
by the German energy technology firm Areva.

Customer-specific and installation-ready components and modules

There are many different filter We maintain a longstanding partnership with Areva. This recognition
housing configuration options in represents further proof of our high quality standards.
filtration, but the basic function
must always be ensured. Safety, quality and reliable delivery – that’s GOH Filtertechnik’s award with the Areva
the philosophy of GOH GmbH, where we quality seal reflects 25 different criteria,
emphasize the importance of sustainable including guidelines for quality, innovative
Our customers benefit from our many years development in all business areas. And capability, and occupational health and
of experience in the construction of filter those principles are paying off. safety standards. The supplier’s commit-
housings, even where special solutions are ment to sustainable development and
GOH Filtertechnik earned the award in the
required. Working together with the cus- environmental protection is also a decisive
category “Construction of tanks, equip-
tomer, we develop the design, calculate the factor in the selection process.
ment and plants”.
wall thicknesses and, on request, prepare
the associated fabrication drawings. After
the customer and the competent authority
review and approve the proposal, we fabri- n Areva president Anne Lauvergeon and GOH general manager Olaf Heupel
at the “Top Supplier” award presentation ceremony in Berlin in 2009.
cate the filter and have the surface treated
according to the specifications.

We also provide other services on request, The largest construction site in Finland today, located on Olkiluoto Island in the Baltic
including ocean freight packaging. Sea. The 1600-megawatt OL 3 unit under construction here will be the most powerful
nuclear plant in the world. The nuclear power plant with a new type of pressurized water
reactor is being supplied as a turnkey package by the Franco-German consortium of
Areva and Siemens. Some 1140 suppliers from 26 countries from all over the world are
participating – and the German contingent also includes GOH Filtertechnik.

Photo: TVO/Hannu Huovila

32 33
 Manufacturing capabilities Materials and welding methods
Dimensions and weights List of materials and processes we use

Flame cutting Milling/drilling

Our production halls total
about 4,500 m2 (50,000 ft2) of Material No. DIN EN AISI ASTM - UNS Commercial name
Flatbed unit CNC
manufacturing space where we 1.0038 RST 37-2 S235JRG2
x-axis 3,000 mm (118 inches) x-axis 1,000 mm (39.4 inches)
produce components with the
y-axis 5,000 mm (197 inches) y-axis 1,000 mm (39.4 inches) 1.0425 H II P265GH SA-516Gr.70
following dimensions:
Carbon steel up to 150 mm (5.9 inches) z-axis 500 mm (19.6 inches)
n Diameters up to 4,000 mm
1.0566 TStE355 P355NL1 SA-516Gr.70
Stainless steel up to 65 mm (2.6 inches)
(13 feet) NC 1.4306 X 2 CrNi 19-11 X 2 CrNi 19-11 SA-304L S 30403
Robot
n Lengths up to 15,000 mm x-axis 750 mm (29.5 inches) 1.4307 X 2 CrNi 18-9 X 2 CrNi 18-9 SA-240-304L
(49 feet) max. diameter 1,200 mm (47 inches)
y-axis 750 mm (29.5 inches)
Length 2,500 mm (98 inches) 1.4404 X 2 CrNiMo 17-13-2 X 2 CrNiMo 17-13-2 SA-316L S 31603 Duplex
n Wall thicknesses up to 160 mm z-axis 500 mm (19.6 inches)
(6.3 inches) Carbon steel up to 100 mm (3.9 inches) 1.4410 X 2 CrNiMoN 25-7-4 X 2 CrNiMoN 25-7-4 S 32750 Super duplex
n Weights up to 20,000 kg
Stainless steel up to 65 mm (2.6 inches) Boring machine
1.4462 X 2 CrNiMoN 22-5-3 X 2 CrNiMoN 22-5-3 S 31803 / S 39209
(44 tons) x-axis 1,800 mm (70.1 inches)
1.4539 X 1 NiCrMoCu 25-20-5 X 1 NiCrMoCu 25-20-5 SA-904L N 08904
y-axis 1,800 mm (70.1 inches)
Bending z-axis 1,000 mm (39.4 inches) 1.4541 X 6 CrNiTi 18-10 X 6 CrNiTi 18-10

1.4571 X 6 CrNiMoTi 17-12-2 X 6 CrNiMoTi 17-12-2 SA-316Ti S 31635

Roll
max. diameter 4,000 mm (157 inches) 1.7362 12 Cr Mo 19-5 12 Cr Mo 19-5 SA-387Gr.21
max. width 3,000 mm (118 inches) Surface treatment 1.7380 10 CrMo 9-10 10 CrMo 9-10 SA-387Gr.22
Carbon steel, stainless steel and
2.4360 NiCu 30 Fe NiCu 30 Fe NA 13 N 04400 Monel 400
aluminum up to 20 mm (0.79 inches)
Sand blasting 2.4602 NiCr 21 Mo 14 W NiCr 21 Mo 14 W N 06022 Hasteloy C22
Press
Carbon steel (blasting media) 2.4610 NiMo 16 Cr 16 Ti NiMo 16 Cr 16 Ti N 06455 Hasteloy C4
max. width 2,500 mm (98 inches)
Press capacity up to 80 tons max. diameter 4,000 mm (157 inches) 2.4617 NiMo 28 NiMo 28 N 10665 Hasteloy B2
max. length 15,000 mm (590 inches)

Stainless steel (glass beads) According to customer needs and specifications, we use the following materials:
Shearing max. diameter 3,000 mm (118 inches)
n Plain, low-alloy and heat-resistant
max. length 3,000 mm (118 inches)
Shear high alloy Cr-Ni-(Mo) steels
max. width 3,000 mm (118 inches) n Fine-grained structural steels for low
Carbon steel up to 18 mm (0.71 inches) and high-temperature applications
Stainless steel up to 14 mm (0.55 inches) Pickling n Highly corrosion-resistant
specialty steels
max. diameter 4,000 mm (157 inches) n Weld cladding and overlays
max. length 15,000 mm (590 inches)
CNC turning
Along with classic joining methods such as
Turning machine
tungsten inert gas welding and gas metal
max. diameter 1,400 mm (55 inches) Painting arc welding (TIG and MAG), we also take
max. length 1,600 mm (63 inches) advantage of the benefits of submerged
Carbon steel, stainless steel and Water wall spray booth arc welding (SAW).
aluminum up to 20 mm (0.79 inches) for components up to 20 m (65 ft) long

34 35
 Approvals and certificates References
We fabricate according to many standards – There’s no better recommendation than satisfied customers
contact us for more information.

Of course we have the work and process Our customers have already been placing their trust in our plants and equip-
qualifications for all of the materials used Approvals ment for many years now. So over the course of time our products and services
at our company. Our welding personnel have impressed many well-known companies. Among others, we fabricate
In order to provide you with a clear
have obtained all of the necessary qualifi- material for the following customers:
overview of our capabilities, here is an
cations and have many years of experience
excerpt from the list of our approvals:
in building tanks and vessels. n ACHENBACH Buschhütten GmbH n Heinrich Wagner
n AD-HP 0 / TRD 201 Sinto Maschinenfabrik
n AREVA NP GmbH
n RL 97/23/EC
Qualit y assurance n BAUER Kompressoren GmbH n John Crane GmbH
n EN 729 -3
n BEKO Systems GmbH, Neuss n LINN High Term GmbH
n Pressure Equipment Directive
Inspectors from competent authorities
for various modules n BOLENZ & SCHÄFER GmbH n OHL Gutermuth
such as RWTÜV, Lloyd’s Register and DNV
n CE according to EC Directive Industrial Valves GmbH
are present at our facilities almost every n BUSE Gastechnik GmbH & Co. KG
day, so continuous manufacturing and 87/404/EEC n OLAER Industries
n CHEMATEALL GmbH
n Building Regulations List A, Part 1
quality control are also assured by an n OLAER Schweiz AG
n Specialist company according to n DONALDSON Filtration
impartial agent. n OHL Guthemuth
§19 I German Water Management Deutschland GmbH
Act (WHG) n EMCO Wheaton n POLYSIUS AG
We have it in writing n UDT n EVER AIR Technology GmbH n RENZMANN & GRÜNEWALD GmbH
n SVTI n ULTRA Air
As a company with worldwide operations, n EVONIK DEGUSSA GmbH
n Stoomwezen (Swedish Code
we have all of the major international n FAUDI AVIATION GmbH & Co. KG n URACA Pumpenfabrik
for Pressure Equipment)
certificates, of course. GmbH & Co. KG
n Germanischer Lloyd n FAUDI GmbH
n VISSER & SMIT HANNAB GmbH
Deutsch n Federal Mogul Deva GmbH
I F I K AT n ZANDER GmbH
ZERT n Fritz Winter GmbH & Co. KG
n TÜV Hessen certified us for the design, manufacturing and für das

DIN EN
Manag
ementsystem

ISO 900
nach

1:2000

en Anwen
dung wurde
bescheinigt
für
erbracht

regelkonform
-Verfahren
eis der

marketing of pressure vessels and pressure systems according

Der Nachw TÜV CERT
gemäß H
und wird k Gmb
ertechni
GOH-Filt orststraße 7
rf
Scharnh Stadtallendo
D-35260

to ISO 9001:2000 and audited us according to AD 2000-

von
ich Vertrieb
gsbere ng und n
Herstellu ksysteme
Geltun
ktion, Druc
Konstru ältern und
Druckbeh
ber 2010
bis 7. Novem
Gültig

information sheet HP 0 / DIN EN 729-2.

2137
73 100
istrier-Nr. 4172 6001
Zertifik
at-Reg ber 2007
t-Nr. 8. Novem
Audit-Berich tadt, den
Darms
gsstelle äßig
-Zertifizierun wird regelm
TÜV CERT Hessen nleiter- eführt und
des TÜV durchg
ierungsstelle -Verfahrenwww.tuev-cl
ub.de.
85 Darms
tadt.
-Der Zertifiz TÜV CERT unter 119, D-642
wurde
gemäß
ist nachp
rüfbar heimerstr.
, Rüdes
ierung Gültigkeit

n Lloyd’s Register confirms that our quality management system

GmbH
Diese ZertifizDie aktuelle Hessen
achung
überwacht. ische Überw
TÜV Techn

/1
Seite 1

complies with Pressure Equipment Directive 97/32/EC.

6-00
TGA -ZM-20-9

n We meet the requirements of the American Society of Mechanical

Engineers and are authorized to apply their symbol to our
pressure vessels.
n The American National Board of Pressure & Boiler Vessel Inspectors
has also authorized us to use their marking.
n Following an audit, the People’s Republic of China also granted us its approval
for the production of pressure vessels.

36 37
 How to find us / Contact
Here‘s how to find or contact us

GOH Netphen – how to get there

n Highway A45 – exit “Siegen” (21)

n Even before leaving the exit ramp, there are two places to turn off – take the second one!
[email protected] 1st exit – “Dreisbach”: wrong
www.goh-gmbh.de 2nd exit – “Siegen” (“Netphen”): correct
n This exit takes you to an expressway which you have to follow
n From this point on, please continue following the signs to Netphen, which also indi-
cate the correct exit from the expressway;
For information: along this section of expressway, there is a short tunnel – be advised
that police often monitor speed just before or after the tunnel.
n Following the direction “Netphen” automatically leads you into the town of
Dreis-Tiefenbach
n In the town, drive past one traffic light, then one pedestrian crosswalk signal,
and then three more traffic lights
n The signs will indicate “Industriestraße” already: please turn right at the next traffic
light (shortly before passing the city limits, i.e. before the sign which tells drivers that
they are leaving Dreis-Tiefenbach)
n Now you are on Industriestraße – turn right again immediately (about 30 m [100
feet] from the traffic light), and you’ve arrived, right in front of our production halls

Lützelau 8
D-57250 Netphen
Telefon: +49 271 - 71034
Telefax: +49 271 - 71036

Photo: Fotolia, Victor Pogontsev

Scharnhorststr. 7
D-35260 Stadtallendorf
Telefon: +49 6428 - 44659-0
Telefax: +49 6428 - 44659-10

38
 [email protected] Lützelau 8 ScharnhorststraSSe 7
www.goh-gmbh.de D-57250 Netphen D-35260 Stadtallendorf
Photos (2): BEKO Systems GmbH Neuss