RTD Converter WGP-PAD / PCS / PC

This slim-type plug-in converter accepts a RTD input and provides optically isolated
DC voltage or current outputs.
It amplifies and converts the selected RTD input to the selected DC output.
This converter has a linearizer, a cold junction compensating circuit, and a burnout
protection circuit as standard equipment which is required to measure temperature.
This is used together with a platinum resistance temperature detector (Pt100 Ω / JPt100 Ω).

Features
★ Circuit method is less affective to the length and width of the lead wire
★ Linearizer, Cold junction compensating circuit, and Burnout protection circuit built-in
★ Both AC and DC power supply are available
★ Accuracy at 0.2% FS, Response time 25ms
★ Easy maintenance by plug-in structure
(Unit : mm)

Ordering code
WGP- - -

Response Code Power Supply

Code Element Input RTD Isolation
time 80 to 132Vac 50/60Hz
1
Rated voltage : 100 to 120V ±10%
PAD Pt100Ω Non-isolated
170 to 264Vac 50/60Hz
2
Rated voltage : 200 to 240V ±10%
For
PCS Pt100Ω Isolated 25ms 3 24Vdc ±10%
Platinum
(0 to 90%) 7 48Vdc ±10%
Resistance
8 110Vdc ±10%
PC JPt100Ω Isolated
Temperature Code Output Allowable Load
Code
Range A 4 to 20mAdc 750Ω or less
10 0 to 50°C B 1 to 5mAdc 3kΩ or less
11 0 to 100°C C 1 to 10mAdc 1.5kΩ or less
12 0 to 150°C D 0 to 1mAdc 15kΩ or less
13 0 to 200°C E 0 to 10mAdc 1.5kΩ or less
25 0 to 250°C F 0 to 16mAdc 937Ω or less
30 0 to 300°C G 0 to 20mAdc 750Ω or less
35 0 to 350°C H 1 to 5Vdc 2.5kΩ or more
40 0 to 400°C J 0 to 10mVdc 10kΩ or more
50 0 to 500°C K 0 to 100mVdc 100kΩ or more
60 0 to 600°C L 0 to 1Vdc 500Ω or more
★ Manugacturable Range 14 -20 to +80°C N 0 to 5Vdc 2.5kΩ or more
Manufacturable Range 15 -50 to +50°C P 0 to 10Vdc 5kΩ or more
Input RTD
Temp. Range Min. Span 16 -50 to +100°C Contact us for other than the above
Pt100Ω -200 to +850°C 50°C or more 17 -100 to +100°C S Current output 20mA or less
JPt100Ω -200 to +500°C 50°C or more 18 -200 to +200°C Voltage output 10V or less
Contact us for
99
other than the above

Specifications Terminal connections

Input signal Three-wire resistance temperature detector No Signal Description
Pt100 Ω (JIS’97) 1 INPUT(A)
Output signal DC current/voltage 2 INPUT(B) Input
Accuracy ±0.2% FS (at 23°C) 3 INPUT(B)
Response time Approx. 25ms ( 0 to 90%) 4 NC No connection
Allowable load resistance Current output 5 OUTPUT(+) Output
15V or less of voltage drop 6 OUTPUT(-) Output
Voltage output 7 POWER U(+)
Power Supply
Load current 5mA or less 8 POWER V(-)
For 1V FS or less of output the current is 1µA or less
Zero & span adjustment ±10% FS (3 turn trimmer)
Operating temperature -5 to +55°C
Operating relative humidity 90% or less (non-condensing)
Temperature coefficient ±0.015% FS of span per °C
Linearization Available
Burnout protection Upscale
Isolation Between input, output, and power supply (Isolated type)
Between input/output, and power supply (Non-isolated type)
Insulation resistance 100MΩ or more with a 500Vdc megger
Between input, output, and power supply terminal
Dielectric strength 2000Vac for 1 minute
Power consumption Approx. 5VA (AC), Approx. 100mA (24Vdc)
Power supply variation ±0.1% FS (within the range of rated voltage)
Dimensions 105(H) X 25.6(W) X 136.5(D)mm
Weight Approx. 200g
Structure Plug-in
Connection M3.5 SEMS screw part of the base socket
Material of terminal screw Chromated iron
Case color and material Ivory, heat-resistant ABS resin(94V-0)
Mounting DIN rail or wall surface

＊ Specification is subject to change without notice

Watanabe Electric Industry Co., Ltd.

http://en.watanabe-electric.co.jp/ 1/1