class parameter

LTE_MRBTS_LNBTS_ANR idleTimeThresNbeNB

LTE_MRBTS_LNBTS_ANR idleTimeThresX2

LTE_ANR_GLBNBENBIDX2LINKBLACKLIST enbId

LTE_ANR_GLBNBENBIDX2LINKBLACKLIST mcc
LTE_ANR_GLBNBENBIDX2LINKBLACKLIST mnc

LTE_ANR_GLBNBENBIDX2LINKBLACKLIST mncLength

LTE_MRBTS_LNBTS_ANR maxNumX2LinksIn

LTE_MRBTS_LNBTS_ANR maxNumX2LinksOut

LTE_ANR_PCIIPADRMAP ipAdr

LTE_MRBTS_LNBTS_ANR s1PrdRevalWaitTmr

LTE_MRBTS_LNBTS_ANR x2PrdRevalWaitTmr

LTE_MRBTS_LNBTS_GTPU gtpuPathSupint

LTE_MRBTS_LNBTS_GTPU gtpuT3Resp

LTE_MRBTS_LNBTS_FTM_IPNO actDynamicFirewall
LTE_MRBTS_LNBTS_FTM_IPNO actIpv6

LTE_MRBTS_LNBTS_ISHPR nCellsLoadExchange

LTE_MRBTS_LNBTS_LNADJ cPlaneIpAddrCtrl

LTE_LNADJ_UPLANEIPADDRLIST uPlaneIpAddrList

LTE_MRBTS_LNBTS_LNADJ x2LinkStatus

LTE_MRBTS_LNBTS_LNADJ_LNADJL cpConfDL

LTE_MRBTS_LNBTS_LNADJ_LNADJL cpConfUL

LTE_MRBTS_LNBTS_LNADJ_LNADJL dlTrmBw

LTE_MRBTS_LNBTS_LNADJ_LNADJL fUlEarfcn

LTE_MRBTS_LNBTS_LNADJ_LNADJL sourceOfData

LTE_MRBTS_LNBTS_LNADJ_LNADJL spcSubConfTD

LTE_MRBTS_LNBTS_LNADJ_LNADJL ulDlConfTD

LTE_MRBTS_LNBTS_LNADJ_LNADJL ulTrmBw

LTE_MRBTS_LNBTS actSatBackhaul

LTE_MRBTS_LNBTS maxParallelIncX2SetupOrECUOvl0

LTE_MRBTS_LNBTS maxParallelIncX2SetupOrECUOvl1
LTE_MRBTS_LNBTS maxParallelOutX2SetupOrECU
LTE_MRBTS_LNBTS maxX2CfUpRetry

LTE_MRBTS_LNBTS neighbCellChkPeriodicity

LTE_MRBTS_LNBTS neighbCellChkStartTime

LTE_MRBTS_LNBTS prioTopoHO

LTE_MRBTS_LNBTS x2CfUpRdmDelayTmr

LTE_LNCEL_BLACKLISTHOL blacklistTopo

LTE_MRBTS_LNBTS_LNCEL ulCacSelection

LTE_MRBTS_LNBTS_LNCEL ulStaticCac

LTE_MRBTS_LNBTS_LNCEL multCioAdaptExecEicic

LTE_MRBTS_LNBTS_LNCEL multLoadMeasRrm

LTE_MRBTS_LNBTS_LNCEL multLoadMeasRrmEicic

LTE_MRBTS_LNBTS_LNCEL tLoadMeasX2Eicic

LTE_MRBTS_LNBTS_LNCEL tStoreUeCntxt

LTE_MRBTS_LNBTS_LNCEL_LNCEL_FDD dlpcMimoComp

LTE_MRBTS_LNBTS_CTRLTS_MTRACE traceX2MsgCategory

LTE_MTRACE_TRACEX2NONUESPECMSGLIST traceX2NonUeSpecMsgList

LTE_MRBTS_LNBTS_CTRLTS_MTRACE traceX2Setting

LTE_MTRACE_TRACEX2UESPECMSGLIST traceX2UeSpecMsgList

LTE_MRBTS_LNBTS_PMRNL mtX2AP
LTE_MRBTS_LNBTS_PMRNL mtX2SctpStatistics

LTE_QOS_TRAFFICTYPESMAP trafficType

LTE_MRBTS_LNBTS_SCTP sctpWaitTimeInitSeqRetry

TNL_MRBTS_TNLSVC_TNL_TNL_R actIpV4BasedS1X2
 description
If for at least the time “idleTimeThresNbeNB” an enbControlled NbeNB no NR and no X2 link is available, then the eNB removes the LNADJ//
LNADJL objects associated with the NbeNB/n/nNotes: /n* Neighbour eNBs and Neighbour Cells which are associated with an
If for an enbControlled X2 link no LTE Neighbour Relation exists and if for at least the time “idleTimeThresX2” no X2 handover is received, then
the eNB autonomously closes the X2 link./n/nNotes: /n* oamControlled X2 links are not autonomouosly closed by
Macro eNB Id of the Global eNB Id of a neighbour eNB towards which no establishment of an eNB Controlled X2-link is allowed./nIf ‘enbId’ is not
provided then the associated ‘Global eNB Id’ is a ‘partially specified Global eNB Id’, i.e.:/nAll ‘Global eNB I
Mobile Country Code of the Global eNB Id of a neighbour eNB towards which no establishment of an eNB Controlled X2-link is allowed.
Mobile Network Code of the Global eNB Id of a neighbour eNB towards which no establishment of an eNB Controlled X2-link is allowed.
Length of Mobile Network Code of the Global eNB Id of a neighbour eNB towards which no establishment of an eNB Controlled X2-link is
allowed.
If the number of eNB-controlled X2-links reaches 'maxNumX2LinksIn', then the eNB shall stop accepting establishment requests for new eNB-
controlled X2-links from neighbour eNBs
If the number of eNB-controlled X2-links reaches 'maxNumX2LinksOut', then the eNB shall stop the automatic establishment of new eNB-
controlled X2-links
X2 C-plane V4//V6 IP address of the eNB serving the cell included in the 'pciIpAdrMap'
If for an inter-eNB LTE Neighbour Relation (NR) without available X2 link a handover preparation is started and since the last validation of the NR
at least the time 's1PrdRevalWaitTmr' has elapsed, then eNB triggers a re-validation for this NR via CGI m
If for an intra-eNB LTE Neighbour Relation (NR), respectively for an inter-eNB NR with available X2 link a handover preparation is started and
since the last validation of the NR at least the time 'x2PrdRevalWaitTmr' has elapsed, then eNB triggers a re-v
This parameter holds the time interval between sending GTP-U ECHO REQUESTs, used for GTP-U user data path supervision on the S1 and X2
interfaces. It defines also if data path supervision is ON or OFF./n/nThe 3GPP recommend GTP-U supervision interval st
This parameter holds the maximum waiting time for GTP-U ECHO RESPONSE messages, used for GTP-U data path supervision on the S1 and X2
interfaces. This parameter is only relevant in case GTP-U path supervision is switched ON (parameter gtpuPathSupint has a
This parameter enables//disables the optional feature 'Dynamic X2 and S1 firewall configuration'.
This parameter enables//disables the optional feature 'Dual Stack IPv4//IPv6 for S1//X2'.
Determines the maximum amount of neighboring cells from which to request neighbor cell load information internally or via X2 interface for
eICIC./n/nNote: Value '0' deactivates the neighbor cell load information exchange.
The parameter determines whether the C-Plane IP address of the neighbor eNB (X2 link) is statically configured or whether eNB is allowed to
update the address based on information provided by ANR procedures./n/noamControlled X2 link:/nIt is the responsibi
This parameter holds the list of X2 U-Plane IPv4//v6 addresses of this adjacent eNB. It is used only when the LTE529 Dynamic X2 and S1 Firewall
feature is enabled./n/nBoth IP address formats are supported./n/nFormat: IPv4 address parameter in dotted deci
The parameter provides information whether the X2 link is successfully established.
Adjacent cyclic prefix configuration in DL. The parameter is not applicable for FDD neighbor cells./n/nPlease note that the parameter is only
meaningful if an X2 link is established, i.e. if x2LinkStatus of the superior LNADJ instance is ‘available’.
Adjacent cyclic prefix configuration in DL./nThe parameter is not applicable for FDD neighbor cells./n/nPlease note that the parameter is only
meaningful if an X2 link is established, i.e. if x2LinkStatus of the superior LNADJ instance is ‘available’.
Downlink transmission bandwidth of the FDD neighbor cell./nThe parameter is not applicable for TDD neighbor cells./n/nPlease note that the
parameter is only meaningful if an X2 link is established, i.e. if x2LinkStatus of the superior LNADJ instance is ‘a
Uplink EARFCN of the FDD neighbor cell./nThe parameter is not applicable for TDD neighbor cells./n/nPlease note that the parameter is only
meaningful if an X2 link is established, i.e. if x2LinkStatus of the superior LNADJ instance is ‘available’.
The parameter provides information whether the object creation or latest update was based on plan file (OM), X2 information (X2) or UE specific
ANR measurements (UE).
Supported special subframe configuration by neighbor eNB. The parameter is not applicable for FDD neighbor cells./n/nPlease note that the
parameter is only meaningful if an X2 link is established, i.e. if x2LinkStatus of the superior LNADJ instance is ‘av
UL and DL Configuration of a subframe in a radio frame supported by neighbor eNB. The parameter is not applicable for FDD neighbor
cells./n/nPlease note that the parameter is only meaningful if an X2 link is established, i.e. if x2LinkStatus of the superi
Uplink transmission bandwidth of the FDD neighbor cell./nThe parameter is not applicable for TDD neighbor cells./nThe enumerated values
correspond to the number of resource blocks 'NRB'./n/nPlease note that the parameter is only meaningful if an X2 link i
The parameter activates the support of satellite connections within S1- and X2 links./n/nSetting the parameter to 'true' does not indicate that
the eNB itself has satellite backhaul. For indication of eNB itself having satellite backhaul its eNB ID must b
Maximum number of parallel handling of incoming X2 Setup or ENB Configuration Update messages when eNB is in overload level 0 (or no
overload)
Maximum number of parallel handling of incoming X2 Setup or ENB Configuration Update messages when eNB is in overload level 1
Maximum number of parallel handling of outgoing X2 Setup or ENB Configuration Update messages
The maximum number of times the eNB shall retry the X2 eNB Configuration Update attempts.
Periodicity, with which eNB repeats the check if for available X2 links there are neighbor cells with incomplete configuration information. /n/nIf
'neighbCellChkPeriodicity' is set to '0' the check for incomplete configuration information is deactivated.
The parameter configures the local time at which eNB checks if for available X2 links are neighbor cells with incomplete configuration information
existing./nAs long as enabled, the check for missing configuration information is repeated with a periodicit
This parameter is used to define priorities between the 3 topology options for intra LTE handover, which are /n1) Intra eNB HO/n2) HO via X2/n3)
HO via S1/nIt's assumed that Intra eNB HO can not have lower priority than any other topology and S1 HO can no
eNB generates a random delay time from the interval [0, x2CfUpRdmDelayTmr] for X2 eNB Configuration Update procedure. This random delay
time is added to x2CfUpRspTmr while waiting for a X2 eNB Configuration Update Acknowledge from other eNB. It is also ad
This parameter is introduced to allow blacklisting for X2-Handover only other HO variants are still allowed /nIf set to 'all' the respective entry in
blacklistHoL is valid for all kinds of Handover Topology. If set to 'onlyX2', handover to the respecti
This parameter selects the value to report in the Resource Status Update message for the uplink CAC./nWhen set to 'ulFixedCac' the uplink CAC
reported in the X2 Resource Status Update will be the value set in ulStaticCac./n/nWhen set to 'ulReflectDlCac' t
This parameter defines the uplink CAC value that will be sent in the X2 Resource Status Update message when ulCacSelection is set to
'ulFixedCac'.
This value is multiplied by (multLoadMeasRrmEicic * tLoadMeasX2Eicic) to define the execution periodicity of the CIO adaptation algorithm for
eICIC in relation to the ABS algorithm for eICIC./n/nIt is recommended to execute the CIO adaptation algorithm le
This value is multiplied by tLoadMeasX2 to define the periodicity with which the collected available resource reports from the enquired neighbor
cells are evaluated
This value is multiplied by tLoadMeasX2Eicic to define the periodicity with which the collected available resource reports from the enquired
neighbor cells are evaluated by the eNB cell and the periodicity of the ABS algorithm.
This timer defines the periodicity with which neighbor cells are requested by the eNB cell to send updated values of the load measurements for
eICIC via X2/n/nNote:/nVaidl values are 1000, 2000, 5000, 10000;
This timer is started when an UE enters a cell by handover or RRC Re-Establishment./n/nThe timer controls how long the context needed to send
an X2AP: HANDOVER REPORT is stored in the new cell after handover./nNo special action is triggered on timer expir
Sets the compensation in 'TXDiv', '4-way TXDiv', 2x2 MIMO SM, 4x2 MIMO SM , 4x4 MIMO SM, 8x4 MIMO SM (TDD cell only) case into the DL
power control./nCompensation of MIMO Coverage effects for MIMO Spatial Multiplexing and MIMO Diversity /nThe parameter de
If traceX2MsgCategory = UEspecific then the parameter traceX2UeSpecMsgLst contains list of UE specific messages to be traced./nIf
traceX2MsgCategory = nonUEspecific then the parameter traceX2NonUeSpecMsgLst contains list of non-UE specific messages to be
If traceX2MsgCategory = all or traceX2MsgCategory = nonUEspecific then traceX2NonUeSpecMsgList contains list of enum for the non-UE
specific messages to be traced./nNote: These non-UE specific (eNB related) messages (e.g. X2 setup or reset) were not inclu
This parameter indicates if all X2 messages are traced (all), specific list(s) of X2 messages as defined in parameter traceX2MsgCategory (specific),
or X2 not traced at all (none).
If traceX2MsgCategory = all or traceX2MsgCategory = UEspecific then traceX2UeSpecMsgList contains list of enum for the UE specific messages
to be traced.
configuration of measurement type LTE X2AP
configuration of measurement type LTE X2 SCTP Statistics
This parameter specifies a traffic type./nAllowed values are:/nCPLANE: Signalling transport (C-plane) between eNB and MME (S1AP protocol) and
signalling transport between eNB nodes (X2AP protocol)./nICMP: ICMP traffic with high and low priority./nIKE: IPS
This parameter defines the wait time the eNB waits until it tries to re-initialize the SCTP association (S1 and X2 OAM controlled)/nCase A: after
having tried unsucessfully to establish an association to a peer with a SCTP sequence /nCase B: After recept
This parameter indicates if the optional feature IPv4 based S1//X2 is enabled or not.
2 or 48

21

64

60

1440

4320
 5

2000

2000

240