Scribd
Upload
113 views5 pages

CNC Canned Cycle Format

This document describes several CNC cycles for controlling machining operations including: 1. Finishing cycles for rough and finish turning using G70 and G71 codes with parameters for start/end points, depth of cut, feed rate, and finishing allowance. 2. Facing cycles using G72 with parameters for depth and width of cut, retraction distance, start/end points, and feed rate. 3. Pattern repeating cycles using G73 with parameters for radial distance, number of cycles, start/end points, and feed rate. 4. Peck drilling cycles using G74 with parameters for retraction distance, depth of hole, feed rate, and drill travel distance.

Uploaded by

Muthukumar Kasinathan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
113 views5 pages

CNC Canned Cycle Format

This document describes several CNC cycles for controlling machining operations including: 1. Finishing cycles for rough and finish turning using G70 and G71 codes with parameters for start/end points, depth of cut, feed rate, and finishing allowance. 2. Facing cycles using G72 with parameters for depth and width of cut, retraction distance, start/end points, and feed rate. 3. Pattern repeating cycles using G73 with parameters for radial distance, number of cycles, start/end points, and feed rate. 4. Peck drilling cycles using G74 with parameters for retraction distance, depth of hole, feed rate, and drill travel distance.

Uploaded by

Muthukumar Kasinathan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 5

CNC TECHNOLOGY (FANCU CONTROL)-NTTF(VTC)

1. FINISHING CYCLE [G70]:


Format :-
G70 P__ Q __

Where :-
P  starting point

Q end point

2.ROUGH TURING [G71]


Format:-
G71 U __ R__

G71 P__ Q__ U__ W__ F__

Where:-
Udepth of cut turning

Rretracting ->relief
Pstarting block

Qend block

W&UFinishing allowance gave along x&y axis

F feed rate

3.FACING CYCLE [G72]

Format:-
G72 W__ R__;
G72 P__ Q__ U__ W__ F__;

Where:-
W=depth of cut in facing

R=refraction

P=starting block

Q=end block

U=finishing allowance (x-axis)

W=finishing allowance (y-axis)


4. PATTERN REPEATING [G73];
Format:-
G73 U__ W__ R__

G73 P__ Q__ U__ W__ F__

Where:-
Uradial (X-axis)

Wradial (Z-axis)

Rno. Of. cycle

5. PECK DRILLING CYCLE [G74]


Format:
G74 R__;

G74 Z__ Q__ F__;

Where:
Rretration

Zz-axis movement [depth]


Qz-axis drill travel

Ffeed

6. GROOVING CYCLE:-
Format:
G75 R__

G75 X__ Y__ P__ Q__ R__ F__

Where:-
R retraction

Pdepth of cut [step distance x-axis]

Qz-axis step distance

Ffeed rate
7. MULIT THREAO CYCLE [G76]
Format:-
G76 P__ Q__ R__;

G76 X__ Z__ P__ Q__ R__;

Where:-
P 03/1 15/2 60/3 (P031560)
1.03no of finishing posses

2.15chamfer distance
3.60angle of thread

Qmini. Depth of cut

Rfinishing allowance

Xcore diameter

Zend of the thread

Pheight of thread

Qdepth of the first roughing cut

You might also like