Scribd Logo
Upload

Welcome to Scribd!

  • 43 views

    Stress Analysis Report Initial Rizky Rahmaddy

    Uploaded by

    Rizky Rahmaddy
    This stress analysis report summarizes the simulation of a problem set part. It includes information on the part, materials used, loads applied, and results of the analysis. Fixed constraints were applied and remote forces of 800,000 lb and 500,000 lb were applied. The maximum von Mises stress was 18.7892 ksi and maximum displacement was 0.00635425 inches. Reaction forces and moments on the fixed constraint were also reported.

    Copyright:

    © All Rights Reserved
    Download as RTF, PDF, TXT or read online from Scribd

    Stress Analysis Report Initial Rizky Rahmaddy

    Uploaded by

    Rizky Rahmaddy
    43 views11 pages
    This stress analysis report summarizes the simulation of a problem set part. It includes information on the part, materials used, loads applied, and results of the analysis. Fixed constraints were applied and remote forces of 800,000 lb and 500,000 lb were applied. The maximum von Mises stress was 18.7892 ksi and maximum displacement was 0.00635425 inches. Reaction forces and moments on the fixed constraint were also reported.

    Original Description:

    ayammaan

    Copyright

    © © All Rights Reserved

    Available Formats

    RTF, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This stress analysis report summarizes the simulation of a problem set part. It includes information on the part, materials used, loads applied, and results of the analysis. Fixed constraints were applied and remote forces of 800,000 lb and 500,000 lb were applied. The maximum von Mises stress was 18.7892 ksi and maximum displacement was 0.00635425 inches. Reaction forces and moments on the fixed constraint were also reported.

    Copyright:

    © All Rights Reserved
    Download as RTF, PDF, TXT or read online from Scribd
    Download as rtf, pdf, or txt
    43 views11 pages

    Stress Analysis Report Initial Rizky Rahmaddy

    Uploaded by

    Rizky Rahmaddy
    This stress analysis report summarizes the simulation of a problem set part. It includes information on the part, materials used, loads applied, and results of the analysis. Fixed constraints were applied and remote forces of 800,000 lb and 500,000 lb were applied. The maximum von Mises stress was 18.7892 ksi and maximum displacement was 0.00635425 inches. Reaction forces and moments on the fixed constraint were also reported.

    Copyright:

    © All Rights Reserved
    Download as RTF, PDF, TXT or read online from Scribd
    Download as rtf, pdf, or txt
    of 11

    Stress Analysis Report Initial Rizky Rahmaddy

    Analyzed File: Week 9 - Problem Set.iam


    Autodesk Inventor Version: 2017 (Build 210142000, 142)
    Creation Date: 06/07/2019, 04:19
    Study Author: User
    Summary:

    Project Info (iProperties)

    Summary
    Author dmm70056

    Project
    Part Number Problem Set
    Designer dmm70056
    Cost Rp0
    Date Created 21/02/2012

    Status
    Design Status WorkInProgress

    Physical
    44,5706
    Mass
    lbmass
    Area 566,904 in^2
    Volume 156,865 in^3
    x=-3,54199 in
    Center of Gravity y=-3,59151 in
    z=1,40905 in

    Note: Physical values could be different from Physical values used by FEA reported below.

    Simulation:1
    General objective and settings:
    Design Objective Single Point
    Study Type Static Analysis
    Last Modification Date 05/07/2019, 14:13
    Detect and Eliminate Rigid Body Modes No
    Separate Stresses Across Contact
    No
    Surfaces
    Motion Loads Analysis No

    Mesh settings:
    Avg. Element Size (fraction of model
    0,1
    diameter)
    Min. Element Size (fraction of avg. size) 0,2
    Grading Factor 1,5
    Max. Turn Angle 60 deg
    Create Curved Mesh Elements No
    Use part based measure for Assembly mesh Yes

    Material(s)
    Name Steel, Mild
    Mass Density 0,283599 lbmass/in^3
    General Yield Strength 30022,8 psi
    Ultimate Tensile Strength 50038 psi
    Young's Modulus 31908,3 ksi
    Stress Poisson's Ratio 0,275 ul
    Shear Modulus 12513,1 ksi
    Bracket
    Mounting Plate
    Bolt GB/T 16674.1-2004 M12x25
    Part Name(s)
    Bolt GB/T 16674.1-2004 M12x25
    Bolt GB/T 16674.1-2004 M12x25
    Bolt GB/T 16674.1-2004 M12x25
    Name Cast Bronze
    Mass Density 0,320449 lbmass/in^3
    General Yield Strength 18564,8 psi
    Ultimate Tensile Strength 39885,4 psi
    Young's Modulus 15896,1 ksi
    Stress Poisson's Ratio 0,335 ul
    Shear Modulus 5953,61 ksi
    Part Name(s) Bushing 1
    Bushing 2
    Name Stainless Steel
    Mass Density 0,289018 lbmass/in^3
    General Yield Strength 36259,4 psi
    Ultimate Tensile Strength 78320,4 psi
    Young's Modulus 27992,3 ksi
    Stress Poisson's Ratio 0,3 ul
    Shear Modulus 10766,3 ksi
    Pin
    Part Name(s)
    Shaft
    Name Stainless Steel, Austenitic
    Mass Density 0,289018 lbmass/in^3
    General Yield Strength 33068,6 psi
    Ultimate Tensile Strength 78320,4 psi
    Young's Modulus 27600,7 ksi
    Stress Poisson's Ratio 0,305 ul
    Shear Modulus 10575 ksi
    BS EN 22338 C - withdrawn 10 h11 x 35 - C
    Part Name(s)
    BS EN 22338 C - withdrawn 10 h11 x 35 - C

    Operating conditions

    Remote Force:1
    Load Type Remote Force
    Magnitude 800,000 lbforce
    Vector X 0,000 lbforce
    Vector Y 800,000 lbforce
    Vector Z 0,000 lbforce
    Remote Point X 0,000 in
    Remote Point Y -1,022 in
    Remote Point Z 3,000 in

    Selected Face(s)
    Remote Force:2
    Load Type Remote Force
    Magnitude 500,000 lbforce
    Vector X -0,000 lbforce
    Vector Y -500,000 lbforce
    Vector Z 0,000 lbforce
    Remote Point
    -6,000 in
    X
    Remote Point Y 1,500 in
    Remote Point Z 5,100 in

    Selected Face(s)
    Fixed Constraint:1
    Constraint
    Fixed Constraint
    Type

    Selected Face(s)
    Results

    Reaction Force and Moment on Constraints


    Reaction Force Reaction Moment
    Constraint Name
    Magnitude Component (X,Y,Z) Magnitude Component (X,Y,Z)
    0 lbforce -3,33475 lbforce ft
    Fixed Constraint:1 292,339 lbforce -292,339 lbforce 326,024 lbforce ft 2,06293 lbforce ft
    0 lbforce -326 lbforce ft

    Result Summary
    Name Minimum Maximum
    Volume 156,865 in^3
    Mass 44,5706 lbmass
    Von Mises Stress 0,00000118103 ksi 18,7892 ksi
    1st Principal Stress -4,54937 ksi 21,6971 ksi
    3rd Principal -15,5665 ksi 3,22472 ksi
    Stress
    Displacement 0 in 0,00635425 in
    Safety Factor 1,59787 ul 15 ul

    Figures

    Von Mises Stress

    1st Principal Stress


    3rd Principal Stress
    Displacement
    Safety Factor
    D:\MODUL\MINGGU 7\PSA6\PSA 6_FILES\Week 9 - Problem Set.iam

    You might also like