2019

cuckoosnestdesigns&buildlifeconstructions

Plumbing Checklist
Plumbing/Sanitary
GENERAL INFORMATION
plumbing/sanitary
1. DESIGN MANUALS
 KMBR.
 KPBR.
 NBC.
 Time Savers Manual.
 Neufert Manual.
 Previous Drawings/References.

2. SPECIFICATIONS/STANDARDS/REQUIREMENTS

3. DESIGN AND DRAFT

Drawings
PLUMBING REVIEW
NO. ITEM COMMENTS/
YES/NO/NA
1 Have Submission Requirements for this review been met?
2 Check the distance to water source, storage and disposal :
 Well
 Public water service
 Water tank
 Rain water harvesting tank
 Underground tanks
 Soak/sewage pits
 Septic tanks
3. Check proximity distance between :
 Drinking water source and septic/soak pits. (7.5 m)
 Well/septic/sewage/rain water harvesting tanks with site
boundary (Min 1.2 m)
4. Check minimum pipeline for cost reduction and better proximity with :

1
 2019
cuckoosnestdesigns&buildlifeconstructions
 Water source and pump
 Water source and storage
 Septic/soak pits from toilet and kitchen
5. Check specifications/ standards/ requirements satisfied?
6. Check all required fixtures given:
 kitchen (in and out)
- sink
- fuel
- hot water/cold water
- work area sink
- water purifier
 toilet (in and out)
- trap (wet/dry area)
- wash
- w/c, flush
- taps, faucet, shower
- water heater

7.  Water tank position

OTHER (If any):

8. Drainage
 roof gutter, gutter size
 gutter path
 lines to ground/tank
 roof slope
 land slope.(storm water)
 Drainage channel
 traps
9. Distance/details marked :
 well
 public water service
 rain water harvest tank
 soak pit
 septic tank

2
 2019
cuckoosnestdesigns&buildlifeconstructions
 overhead water tank
 UG tanks
10. Plumbing line marked:
 Hot water
 Cold water
 Drinking water
 Fire
 Sewage out
 Drainage/storm water channel
 Gutter line
11. Fixture/fittings marked:
 Height
 Location
 Has adequate wall space been provided for piping to serve wall-
hung fixtures and other fixtures?
 Size
 model
12. Toilet interior
 coordinated with plumbing
 coordinated with electrical
 ceiling height
niche
- height
- dimensions
- finish
ledge wall
- height
- dimensions
- finish
storage
- location
- dimensions
- finish
wet area/dry area sizes
13. Heights marked (fixtures/sanitary):
- taps
- shower
- health faucet
- cloth/soap holders
- W/C
- Flush
- Ledge wall
- Wash
- Niche
- Ventilation
- Tile layout

3
 2019
cuckoosnestdesigns&buildlifeconstructions
- Light fittings
- Levels/slope
- Celling
- Exhaust fan
- Heater
- Other electrical/sanitary fittings
- traps
14. Tile layout
- tile layout
- tile specification
- paving direction
- area
- wall tiling height
15. Plumbing
- pipe sizes
- sanitary fixture sizes
- piping distance (if required)
- pump location
- Have floor numbers, floor heights, and plumbing fixture
numbers, sizes are verified?
16. Drawing requirements
 4 sections/elevations
 All documented :
- Sizes
- Height
- Specification
 Plan with
- Slopes
- Levels
- Layouts
- Locations
- Dimensions
 Highlight/ line weight
- Plumbing lines
- Fixtures
 Dimensions marked
 Properly documented
 Plotted in company sheet layouts in required sizes
 Scale
17. Design/ Drawing updates
- Updates are made in drawings
- Have drawings been prepared in compliance with Requirements
satisfied
- Update are coordinated with other drawings
- Electrical
- Architectural

4
 2019
cuckoosnestdesigns&buildlifeconstructions
- Landscape
- Are drawings reviewed?
- Revised drawings are provided to the site.
- Site visit done
18. Were previous suggestions/comments satisfied?

On site review
1. Are all works going with Drawings?

2. Any changes onsite site made? Specify

3. Change made onsite been corrected in concerned drawings?

4. Problems identified on-site, if any?

5. Other remarks/Suggestions/Notes

Date : Signature
Place :

5
 2019
cuckoosnestdesigns&buildlifeconstructions