Scribd Logo
Upload

Welcome to Scribd!

  • 37 views

    TDS - Inside Micrometer 0-150

    Uploaded by

    JanMarkMontedeRamosWong
    The technical data sheet provides specifications for an inside micrometer with a range of 0-150mm. It requires compliance or any deviations to be clearly indicated in the bid offer column. The inside micrometer must have an accuracy of 0.01mm. Bidders are required to fill in company and authorized signature details to indicate compliance with technical requirements.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    TDS - Inside Micrometer 0-150

    Uploaded by

    JanMarkMontedeRamosWong
    37 views1 page
    The technical data sheet provides specifications for an inside micrometer with a range of 0-150mm. It requires compliance or any deviations to be clearly indicated in the bid offer column. The inside micrometer must have an accuracy of 0.01mm. Bidders are required to fill in company and authorized signature details to indicate compliance with technical requirements.

    Original Description:

    tds

    Original Title

    8. TDS_inside Micrometer 0-150

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The technical data sheet provides specifications for an inside micrometer with a range of 0-150mm. It requires compliance or any deviations to be clearly indicated in the bid offer column. The inside micrometer must have an accuracy of 0.01mm. Bidders are required to fill in company and authorized signature details to indicate compliance with technical requirements.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    37 views1 page

    TDS - Inside Micrometer 0-150

    Uploaded by

    JanMarkMontedeRamosWong
    The technical data sheet provides specifications for an inside micrometer with a range of 0-150mm. It requires compliance or any deviations to be clearly indicated in the bid offer column. The inside micrometer must have an accuracy of 0.01mm. Bidders are required to fill in company and authorized signature details to indicate compliance with technical requirements.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 1

    TECHNICAL DATA SHEET (TO BE FILLED UP BY THE MANUFACTURER / BIDDER) Page 1 of 1

    DETAILS / PARTS GCGI TECHNICAL REQUIREMENTS BID OFFER

    1.01 Name Inside Micrometer

    1.02 Brand: (Preferred) Any brand

    1.03 Range 0 – 150mm

    1.04 Quantity One (1) pc

    1.05 Accuracy 0.01 mm step

    NOTES:
    1. Manufacturer/Bidder shall indicate its compliance to the Technical Requirements of GCGI on the column marked “BID OFFER” by using
    ONLY the words “COMPLY” or “FOLLOWED”. Symbols or characters such as “DITTO” or QUOTATION MARKS are NOT
    ACCEPTABLE. Should the Bidder deviate from the requirements of GCGI, it shall indicate the exact offer on the space provided.
    Supporting documentation must be provided.
    2. In case the provided spaces are not enough, use additional sheet and indicate “SEE ATTACHED” on the space provided.
    3. Unless otherwise specified, requirements indicated above are minimum.
    4. Failure to provide the necessary information/data required in this Technical Data Sheet may cause the disqualification of bid.

    Bidder’s Name: Manufacturer’s Name:

    Authorized Signatory: Authorized Signatory:

    Designation: Designation:

    Signature: Signature:

    Date: Date:

    FOR GCGI USE ONLY


    Document Title
    GREEN CORE GEOTHERMAL INC.
    Instrumentation & Control Section INSIDE MICROMETER (0 – 150mm)
    Maintenance Department
    Project Name
    Revision Date Description Requisition Number Prepared by Checked by Approved by

    0 24/04/2019 Issued For Bid JMMW MCA DTA

    You might also like