Scribd
Upload
98 views2 pages

Answer Any Two Full Questions, Each Carries 15 Marks: Reg No.: - Name

This document appears to be an exam for a Digital Signal Processing course. It contains 3 parts - Part A with 3 short answer questions, Part B with 2 longer answer questions, and Part C with 2 even longer answer questions. The questions cover topics like convolution, DFT, FIR and IIR filter design, decimation, interpolation, word length effects, and DSP processor architecture. Students are asked to solve problems, prove properties, design filters, explain architectures and effects, and realize signal flow graphs.

Uploaded by

Gj
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
98 views2 pages

Answer Any Two Full Questions, Each Carries 15 Marks: Reg No.: - Name

This document appears to be an exam for a Digital Signal Processing course. It contains 3 parts - Part A with 3 short answer questions, Part B with 2 longer answer questions, and Part C with 2 even longer answer questions. The questions cover topics like convolution, DFT, FIR and IIR filter design, decimation, interpolation, word length effects, and DSP processor architecture. Students are asked to solve problems, prove properties, design filters, explain architectures and effects, and realize signal flow graphs.

Uploaded by

Gj
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

A A5802 Pages: 2

Reg No.:_______________ Name:__________________________

APJ ABDUL KALAM TECHNOLOGICAL UNIVERSITY


FIFTH SEMESTER B.TECH DEGREE EXAMINATION, APRIL 2018
Course Code: EC301
Course Name: DIGITAL SIGNAL PROCESSING
Max. Marks: 100 Duration: 3 Hours

PART A
Answer any two full questions, each carries 15 marks Marks

1 a) If x(n) = {2,3,4,5,6,4,3,2,1}, h(n) = {2, 3,4,5}. Find x(n)*h(n) using overlap save (7)
method.
b) Find the 8 point DFT of the sequence x(n) ={ 1,2,3,4,4,3,2,1} using DITFFT radix (8)
2 algorithm.
2 a) State and prove any three properties of DFT. (7)
b) Find the 8-point DFT of the real sequence x(n) = {1,2,2,2,1,0,0,0} using (8)
decimation in frequency FFT algorithm.
3 a) Find the circular convolution of x1(n) = {1,2,3,4} and x2(n) = {2, 1,2}. (5)
b) The first eight points of the 14-point DFT of a real valued sequence are [12, -1+3j, (5)
3+j4, 1-j5, -2+j2, 6+j3, -2-j3, 10]
i) Determine the remaining points.
ii) Evaluate x[0] without computing the IDFT of X(k).
c) Find the 8-point DFT of the sequence {2, 0,2,0, 2, 0, 2, 0} using 4-point DFTs. (5)

PART B
Answer any two full questions, each carries 15 marks
4 a) Find the response of the signal x(n) = 2Cos(π/2)n when applied to an FIR filter (5)
with impulse response h(n) = {1,3,1}.
b) A second order linear phase FIR filter has a zero at z = ½. Obtain the magnitude (5)
and phase response of the filter.
c) An all pole analog filter have transfer function H(s) = 1/(s2+5s+6). Find H(z) by (5)
impulse invariance method.Assume T=1sec.
5 a) Design an ideal FIR high pass filter with frequency response (7)
( )=1 ≤| | ≤
4
0 | | ≤
4
Find the value of h(n) for N=11.
b) Design a digital Butterworth filter satisfying the following constraints (8)
0.707 ≤ ( ) ≤1 0 ≤ ≤
2
3
( ) ≤ 0.2 ≤ ≤
4
using bilinear transformation, (Assume T=1sec)

Page 1 of 2
A A5802 Pages: 2

6 a) A low pass filter has the desired frequency response: (8)


( )= 0 < <
2
= 0 < <
2
Determine h(n) based on frequency sampling technique.
b) For the given specification, design an analogButterworth filter (7)
0.9 ≤ | ( )| ≤ 1 0 ≤ ≤ 0.2
| ( )| ≤ 0.2 0.4 ≤ ≤

PART C
Answer any two full questions, each carries 20 marks
7 a) Draw the direct form-I and direct form-II structures for a system described by the (10)
difference equation ( ) = ( ) + ( − 1) + 3 ( − 1) − 2 ( − 2).
b) Write short notes on any two finite word length effects in DSP systems with (10)
examples.
8 a) Draw and explain the internal architecture of TMS320C67XX digital signal (10)
processor.
b) Consider a signal ( ) = ( ) ( ).Obtain the signals with: (5)
i) Decimation factor 3 ii) Interpolation factor 3
c) The signal ( )=( ) ( ) is applied to a decimator that decimates the input (5)
signal by a factor of 2.Find the spectrum of the output and plot it.
9 a) Draw the cascade form structure for a discrete time sequence described (5)

by: .
b) Realise a FIR system with function ( )=1+ + + + . (5)
c) Write short notes on finite word length effect in IIR digital filters. (10)
****

Page 2 of 2

You might also like