Insect Ecology Integrated Pest Management PDF

Insect Ecology & Integrated Pest
Management
Insect Ecology & Integrated Pest
Management
This eCourse Developed By

TNAU (ICAR)
INDEX
SN Chapter Page No
1 Principles of Applied Entomology 5-7
2 Honey bees:- History of bee keeping 8-13
3 APIARY MANAGEMENT 14-17
4 ROLE OF HONEY BEES IN CROSS POLLINATION 18-21
5 BEE PRODUCTS - THEIR PROPERTIES AND USES 22-23
6 Effect of agricultural inputs on bee activity – Pesticide poisoning 24-29
7 Role of pollinators, weed killers and other beneficial insects 30-41
8 Insect ecology and balance of life 42-46
9 Population dynamics and role of biotic factors 47-50
10 Abiotic factors on insect population 51-54
11 PEST 55-59
12 PEST MONITORING 60-64
13 PEST MANAGEMENT 65-67
14 TRADITIONAL METHODS OF PEST CONTROL 68-75
15 LEGAL CONTROL METHODS 76-79
16 HOST PLANT RESISTANCE 80-83
17 BIOLOGICAL CONTROL 84-88
18 CHEMICAL CONTROL 89-91
19 PESTICIDES GROUPS 92-94
20 THE INSECTICIDES ACT, 1968 95-97

21 PHEROMONES 98-100
22 STERIITY METHODS 101-103
23 INSECT GROWTH REGULATORS 104-110
24 PESTICIDE APPLICATION METHODS 111-114
25 PESTICIDE COMPATIBILITY 115-120
26 IMPACT OF GLOBAL WARMING ON PESTS 121-122
27 INTEGRATED PEST MANAGEMENT 123-125
28 INTEGRATED PEST MANAGEMENT 126-127
29 IPM (Integrated Pest Management) for Rice 128-129
30 BIOTECHNOLOGY IN PEST MANAGEMENT 130-131

Insect Ecology & Integrated Pest Management
Lecture 1
Principles of Applied Entomology
The field of entomology may be divided into 2 major aspects.
1. Fundamental Entomology or General Entomology

2. Applied Entomology or Economic Entomology
Fundamental Entomology deals with the basic or academic aspects of the Science
of Entomology. It includes morphology, anatomy, physiology and taxonomy of the
insects. In this case we study the subject for gaining knowledge on Entomology
irrespective of whether it is useful or harmful.
Applied Entomology or Economic Entomology deals with the usefulness of the

Science of Entomology for the benefit of mankind. Applied entomology covers the
study of insects which are either beneficial or harmful to human beings. It deals
with the ways in which beneficial insects like predators, parasitoids,
pollinators or productive insects like honey bees, silkworm and lac insect can be
best exploited for our welfare. Applied entomology also studies the methods in
which harmful insects or pests can be managed without causing significant
damage or loss to us.
In fundamental entomology insects are classified based on their structure into

families and orders etc. in applied entomology insects can be classified based on
their economic importance i.e. whether they are useful or harmful.
Economic classification of insects

Insects can be classified as follows based on their economic importance.
This classification us according to TVR Ayyar.
Insects of no economic importance:-

There are many insects found in forests, and agricultural lands which neither cause
harm nor benefit us. They are classified under this category. Human beings came
into existence 1 million years ago. Insects which constitute 70-90% of all animals
present in this world came into existence 250 - 500 million years ago.
Insects of economic importance

A. Injurious insects
a) Pests of cultivated plants ( crop pests)
Each cultivated plant hatbours many insects pests which feed on them reduce the
yield of the3 crop. Field crops and horticultural crops are attacked by many insect
species. (eg) cotton bollworm, Rice stem bores.
5 www.AgriMoon.CoM
b) Storage pests
Insects feed on stored products and cause economic loss. (eg) Rice wewil, Pulse
beetle.
c) Pest attacking cattle and domestic animals
Cattle are affected by pests like Horse fly, Fleshfly, Flese and Lice. They suck
blood and sometimes eat the flash.
d) House hold and disease carrying insects
House hold pests include cockroach, ants, etc,. Disease carrying insects are
mosquitoes, houseflies, bed bugs, fleas etc.
B. Beneficial insects
a) Productive insects
Silk worm:- The silk worm filament secreted from the salivary gland of the larva
helps us in producing silk.
Honey bee:- Provides us with honey and many other byproducts like bees wax and
royal jelly.
Lac insects:- The secretion from the body of these scale insects is called lac. Useful
in making vanishes and polishes.
Insects useful as drugs, food, ornaments etc,
As medicine eg. Sting of honey bees- remedy for rhenmatism and arthritis
Eanthoridin - extracted from blister beetle –useful as hair tonic.
As food - for animals and human being.

For animals- aquatic insects used as fish food.
Grass hoppers, termites, pupac of moths.
They have been used as food by human beings in different parts of the world.
Ornaments, entertainers
-Artists and designers copy colour of butterflies.
- Beetles worm as necklace.
- Insect collection is an hobby
(d) Scientific research
Drosophila and mosquitoes are useful in genetic and toxicological studies
respectively.
Helpful insects
Parasites: These are small insects which feed and live on harmful insects by
completing their life cycle in a host and kill the host insect.
Eg egg, larval and pupal parasitoids
Predators: These are large insects which capture and devour harmful insects.
Eg Coccimellids, Preying matritids.
6 www.AgriMoon.CoM
Pollinators: Many cross pollinated plants depend on insects for pollination and fruit
set.
Eg Honey bees, aid in pollination of sunflower crop.
Weed killers: Insects which feed on weeds, kill them thereby killers. Eg Parthenium
beetle eats on parthenium. Cochneal insect feeds in Opuntia dillenii.
Soil builders: soil insects such as ants, beetles, larval of cutworms, cri kets, collun
bola, make tunrels in soil and facilitate aeration in soil. They become good
manure after death and enrish soil.
Scavengers: Insects which feed on dead and decaying matter are called scavengers.
They important for maintaining hygine in the surroundings.
Eg Carrion bettles, Rove beetles feed on deade animals and plants.
House hold and disease carrying insects

i) Pests which cause damage to belongings of human being like furniture, wool,
paper etc. Eg. Cockroaches, furniture beetle, sliver fish etc.
ii) Pests which cause painful bite, inject venoms. Eg. Wasps, bees sting us. Hairy
caterpillar nettling hairs are poisonous. Mosquitoes, bugs bite, piece and suck
blood from us.
iii) Disease causing Mosquito - Malaria, Filariasis, dengue fever. Housefly - Typhoid,
Cholera, Leprosy, Anthrax
7 www.AgriMoon.CoM
Lecture 2: Honey bees:- History of bee keeping
Honey bees and their usefulness are known to man from prehistoric times. Mention
of bees are found in vedas, Ramayan and Quran. The modern bee keeping became
possible after the discovery of movable frame hive in 1851 by Rerd.
L.L.Langshoth. In India beekeeping was introduced in 1882 in Bengal. Rerd.
Newton introduced beekeeping to south India in 1911. But still India is much
behind USA, Canada, Europe, Australia and Newzealand in beekeeping.
Bee species
There are five important species of honey bees as follows.

Apis dorsata: The rock bee Apidae.
Apis cerana indica: The Indian hive bee Apidae.
Apis florea : The little bee Apidae.
Apis mellifera: The European or Italian bee Apidae.
Melipona irridipennis: Danner bee, Meliporidae stingless bee.
Apis dorsata:-
1. They construct single comb in open (About 6ft long and 3ft deep)
2. They shift the place of the colony often.
3. Rock bees are ferocious and difficult to rear.
4. They produce about 36 Kg honey /comb/year.
5. The bees are the largest among the bee described.
Apis florea
1. They also construct comb in open of the size of palm in branches of bushes,
hedges, buildings, caves, empty cases etc.
2. They produce about 1/2Kg honey/year/hive.
3. They are not rearable as they frequently change their palce.
4. The size of the bees is smallest among 4 Apis Sp. Described. (smaller than Indian
bee).
5. They distributed only in plains and not in hills above 450M.
Apis cerana indica (Indian bee/Asian bee)

1. They make multiple parallel combs on trees and cavities in darkness.
2. The bees are larger than Apis florae but smaller than Apis mellifera.
3. They produce about 5Kg of honey/year/hive.
4. They are more prone to swarming and absconding.
5. They are native of India/Asia.
8 www.AgriMoon.CoM
Apis mellifera (Italian bee or European bee)

1. They also make multiple parallel combs in cavities in darkness.
2. They are larger than Indian bees but smaller than Rock bees.
3. They have been imported from European countries.(Italy)
4. They yield on an average 35Kg/hive/year.
5. They are less prone to swarming and absconding.
Honey bee castes
Every honey bee colony comprises of a single queen, a few hundred drones and
several thousand worker castes of honey bees. Queen is a fertile, functional female,
worker is a sterile female and the drone is a male insect.
Duties of a queen
1. The only individual which lays eggs in a colony .(Mother of all bees).
2. Lays upto 2000/day in Apis mellifera.
3. Five to Ten days after emergence, she mates with drones in one or more nuptial
flights.
4. When her spermatheea is filled with sperms, she will start laying eggs and will not
mate any more.
5. She lives for 3 years.
6. The secretion from mandibular gland of the queen is called queen’s substance.
7. The queen substance if present in sufficient quantity performs following functions.
a) Prevent swarming and absconding of colonies.
b) Prevent development of ovary in workers.
c) Colony cohesion is maintained.
8. The queen can lay either fertilized or sterile eggs depending on the requirement.
Duties of a drone
1. Their important duty is to fertilize the queen.
2. They also help in maintenance of hive temperature.
3. They cannot collect nectar / pollen and they do not possess a sting.
Duties of a worker
1. Their adult life span of around 6 weeks can be divided into
a) First three weeks- house hold duty.
b) Rest of the life- out door duty.
House hold duty includes

a. Build comb with wax secretion from wax glands.
b. Feed the young larvae with royal jelly secreted from hypopharyngeal gland.
c. Feed older larvae with bee-bread (pollen+ honey)
9 www.AgriMoon.CoM
d. Feeding and attending queen.

e. Feeding drones.
f. Cleaning, ventilating and cooling the hive.
g. Guarding the hive.
h. Evaporating nectar and storing honey.
Outdoor duties
1. Collecting nectar, pollen, propolis and water.
2. Ripening honey in honey stomach.
Sex differentiation in bees
Bee behaviour
a) Swarming: Swarming is a natural method of colony multiplication in which a part
of the colony migrates to a new site to make a new colony. Swarming occurs when
a colony builts up a considerable strength or when the queen’s substance secreted
by queen falls below a certain level. Swarming is a potent instinct in bees for
dispersal and perpetuation of the species.
Steps involving in swarming

1. Strong colonies develop the instinct of swarming.
2. Development of drone brood and emergence of large number of drones is first sing
of swarming.
3. New queen cells are built at the bottom of comb.
10 www.AgriMoon.CoM
4. When the queen cells are sealed after pupation the old queen along with 1/3 rd or
half colony strength moves out of the hive.
5. They first settle in a nearby bush and hang in a perdant cluster.
6. The scout bees go in search of appropriate place for colonization and later the entire
colony moves to the suitable site.
7. The first swarm which comes of the parent colony with the old queen is called
primary swarm.
8. The new queen which emerges kills all other stages of queen present inside the
queen cell.
9. Sometimes the new queen is not allowed to destroy stages of other queens.
10. In this case the new queen leaves the hive along with a group of workers. This is
called after swarm or cast.
Supersedure:
When a old queen is unable to lay sufficient eggs, she will be replaced or
superseded by supersedure queen. Or when she runs out of spermathezoa in her
supermatheca, and lays many unfertilized eggs from which only drones emerge.
In this case, one or 2 queen cells are constructed in the middle of the comb and not
at the bottom. At a given time both new and old queens are seen simultaneously.
Later the old queen disappears.
Emergency queen
In the event of death of the queen the eggs (less than 2½ days old) in
worker cells are selected and the cell extended like a queen cell. It is fed with
abundant royal jelly and covered into queen. In this case many queen cells are built
in the middle of the comb. The first queen which comes out of the emergency
queen cells kills other stages of queen inside the cells and then go for mating. After
mating they laying fertile eggs.
Laying workers
In the event of loss of a queen and in the event of absence of worker eggs
less than 2½ days old the chance of producing new queen is lost. In this case, the
worker status laying eggs. Since the worker cannot mate, they lay unfertilized
eggs. From these eggs only drones emerge. Moreover, a worker lays more than
one egg per cell and there is competition among the larva, stuited drones are
produced.
Colony odour: Every colony has a specific odour. This is brought about by scent
fanning of secretion of vasanov gland present in last abdominal segment of worker
bees recognise colony odour and return to same hives.
Hive temperature maintenance: Brought about by fanning of wings in hot weather
to reduce temperature. In cold weather they sit on the brood and prevent heat loss.
Division of labour: Each and every caste of bees have their own role to play as
described earlier.
11 www.AgriMoon.CoM
Queen controls colony with her queen’s substance Guarding the hive:- The
workers perform this duty by sitting at hive entrance and preventing and stinging
intrudes.
Royal fidelity or Blossom faithfulness
Bees restrict themselves to a single source of pollen and hectar until it is available.
Only if the pollen and nectar from a plant species is exhausted they more to the
next plant species.
Communication in bees
Bees communicate using various phenomones, including the queen’s substance,
vasanov gland secretion, alarm pheromone emitted from sting and secretion of
tarsal gland. In addition the bees also communicate by performing certain dances.
When scout bees return to the box after foraging they communicate to the
other forages present in the box about the direction and distance of the food source
from the hive by performing dances. The important types of dances are noticed.
1. Round dance is used to indicate a short distance (Less than 50m in case of
A.mellifera). The bee runs in circles, first in one direction and then in opposite
direction, (clockwise and anticlockwise).
Round dance Wag tail dance
2. Tail wagging dance or Wag-tail dance.
This is used to indicate long distance.(more than 50m in case of A.mellifera). Here
the bee makes two half circles in opposite directions with a straight run in between.
During the straight run, the bee shakes (wags) its abdomen from side to side, the
number of wags per unit time inversely proportional to the distance of the food (more
the wags, less the distance.). The direction of food source is conveyed by the angle
that the dancing bee makes between its straight run and top of the hive which is the
same as between the direction of the food and direction of the sun. The bees, can
know the position of the sun even if it is cloudy.
12 www.AgriMoon.CoM
Wag tail dance to communicate the direction and distance of food source
13 www.AgriMoon.CoM
Lecture 3: APIARY MANAGEMENT
Pre-requisites to start beekeeping

a. Knowledge/Training on beekeeping
b. Knowledge on local bee flora
c. Sufficient on local bee flora
d. If necessary practice migratory beekeeping
Apiary site requirements

a. The site should be dry without dampness. High RH will affect bee flight and
ripening of nectar.
b. Water - Natural source/Artificial provision
c. Wind breaks - Trees serve as wind belts in cool areas
d. Shade - Hives can be kept under shade of trees. Artificial structures can also be
constructed
e. Bee pasturage/Florage - Plants that yield pollen/nectar to bees are called bee
pasturage/florage
General apiary management practices

i. Hive inspection - Opening the hive atleast twice a week and inspecting for
following details.
- Presence of queen
- Presence of eggs and brood
- Honey and pollen storage
- Hive record to be maintained for each hive
- Presence of bee enemies like wax moth, mite, disease
ii. Expanding brood net

- Done by providing comb foundation sheet in empty frame during honey flow
period.
iii. Sugar syrup feeding

- Sugar dissolved in water at 1:1 dilution
- Used to feed bees during dearth period
iv. Supering (Addition of frames in super chamber)

- This is done when brood chamber is filled with bees on all frames are covered
- Comb foundation sheet or constructed comb provided in super chamber
v. Honey extraction
- Bee escape board - Kept between brood and super chamber
- Bees bushed away using brush
14 www.AgriMoon.CoM
- Cells uncapped using uncapping knife

- Honey extracted using honey extractor
- Combs replaced in hive for reuse
vi. Swarm management

- Remove brood frames from strong colony and provide to weak
- Pinch off the queen cells during inspection
- Divide strong colonies into 2 or 3
- Trap and hive primary swarm
vii. Uniting bee colonies - Done by Newspaper method

- Bring colonies side by side by moving 30 cm/day
- Remove queen from week colony
- Keep a newspaper on top of brood chamber of queen - Right colony
- Make holes on the paper
- Keep queenless colony on top
- Close hive entrance (the smell of bees will mix)
- Unite bees to the brood chamber and make it one colony
SEASONAL MANAGEMENT
- Pollen and nectar available only during certain period
Honey flow season (surplus food source) x Dearth period (Scarcity of food)
- Extremes in climate like summer, winter and monsoon - Need specific
management tactics
Honey flow season management (Coincides with spring)

- Provide more space for honey storage by giving CFS or built combs
- Confine queen to brood chamber using queen excluder
- Prevent swarming - As explained
- Prior to honey flow - Provide sugar syrup and build sufficient population
- Divide strong colonies into 2-3 new colonies - if colony multiplication need
- Queen rearing technique may be followed to produce new queens for new
colonies
Summer management
- Bees have to survive intense heat and dearth period
- Provide sufficient shade (under trees or artificial structure)
- To increase RH and reduce heat - Sprinkle water twice a day on gunny bag or
rice straw put on hive
- Increase ventilation by introducing a splinter between brood and super chamber
- Provide sugar syrup, pollen supplement/substitute and water
15 www.AgriMoon.CoM
Winter management
- Maintain strong and disease free colonies
- Provide new queen to the hives
- Winter packing in cooler areas (Hilly areas)
Management during dearth period

- Remove empty combs (and store in air tight container)
- Use dummy division board to confine bees to small area
- Unite weak colonies
- Provide sugar syrup, pollen supplement/substitute
Rainy season/monsoon management

- Avoid dampness in apiary site. Provide proper drainage
- In rain when bees are confined to the hive, provide sugar syrup feeding
BEE PASTURAGE/BEE FORAGE

Plants that yield pollen and nectar are collectively called bee pasturage or bee
forage.
Plants which are good source of nectar
1. Tamarind 6. Moringa
2. Neem 7. Prosopis juliflora
3. Soapnut tree 8. Glyricidia maculata
4. Eucalyptus 9. Tribulus terrestris
5. Pungam
Plants which are good source of pollen

1. Sorghum 6. Sweet potato
2. Maize 7. Tobacco
3. Millets like Cumbu, Tenai, 8. Coconut
Varagu, Ragi
4. Roses 9. Castor
5. Pome granate 10. Date palm
Plants which are good source of Pollen and Nectar

1. Banana 7. Peach
2. Citrus 8. Guava
3. Apple 9. Sunflower
4. Berries 10. Safflower
5. Pear 11. Mango
6. Plum
16 www.AgriMoon.CoM
FORAGING
Refers to collection of nectar and pollen by bees.
Nectar foragers
- Collect nectar from flowers using lapping torigue
- Passes the nectar to hive bees
- Hive bees repeatedly pass the nectar between preoral cavity and tongue - to
ripen honey
- Later drops into cell
Pollen foragers
- Collects pollen by passing flower to flower. Pollen sticking to body removed -
Using pollen comb
- Packed using pollen press into corbicula
- A single bee carries 10-30 mg pollen (25% of bee’s wt)
- Dislodge by middle log into cell
- Mix with honey and store
Floral fidelity
A bee visits same species of plant for pollen/nectar collection until exhausted. Bees travel
2-3 km distance to collect pollen/nectar.
17 www.AgriMoon.CoM
Lecture 4: ROLE OF HONEY BEES IN CROSS POLLINATION - THEIR

EXPLOITATION - CASE STUDIES WITH SELECTED CROPS
For SEXUAL reproduction in flowering plants transfer of anther to stigma is

essential - Pollination
Self pollination
Transfer to sligma of same plant
No external agents are involved
Cross pollination
Transfer pollen from one plant to stigma of another plant
External agents are involved
External agents involved in pollination

A. Abiotic agents
a. Wind (Anemophily)
Wind carries pollen from one plant to another
Flowers are small, inconspicuous, unattractive
Pollen are dry and light in weight
Stigma feathery with large surface area
eg: Maize, barley, wheat, sugarcane
b. Water (Hydrophily)
Water carries pollen from one plant to other
B. Biotic agents
Bird, bat and insects are important biotic agents
Among insects honey bees play major role
Honey bees and flowering plants have coevolved
In insect pollinated plants, flowers are large, brightly colour, distinct fragrance,
presence of nectar and sticky pollen
True honeybees (Apis spp.) - Most valuable pollinators of commercial crop
Qualities of honeybees which make them good pollinators

1. Body covered with hairs and have structural adaptation for carrying nectar and
pollen.
2. Bees - Not injurious to plants
3. Adult and larva feed on nectar and pollen - Available in plenty
4. Superior pollinators - Since store pollen and nectar for future use
5. No diapause - Need pollen throughout year
6. Body size and probascis length - Suitable for many crops
18 www.AgriMoon.CoM
7. Pollinate wide variety of crops

8. Forage in extreme conditions also (weather)
Effect of bee pollination on crop

- It increases yield (seed yield, fruit yield) in many crops
- It improves quality of fruits and seeds
- Bee pollination increases oil content of seeds in sunflower
- Bee pollination is a must in some self incompatible crops for seed set
Crops benefited by bee pollination
Vegetable and
Fruits and nuts Oil seed crops Forage seed crops
vegetable seed crops
Almond Cabbage Sunflower Lucerve
Apple Cauliflower Niger Clover
Apricot Carrot Rape seed
Peach Coriander Mustard
Strawberry Cucumber, Melon Safflower
Citrus Onion, Pumpkin Gingelly
Litchi Radish, Turnip
Per cent increase in yield due to bee pollination
Crop Botanical name Per cent yield increase

Mustard Brasica sp 43
Sunflower Helianthus annus 32 - 48
Cotton Gossypium sp. 17-19
Lucerne Medicago sativa 112
Onion Allium cepa 93
Apple Purus malus 44
Scope of beekeeping for pollination in India

- Total area under bee dependant crops - 50 million ha
- At the rate of 3 colonies/ha - 150 million colonies needed
- In India only 1.2 million colonies exist - There is scope
19 www.AgriMoon.CoM
Management of bees for pollination

- Place hives very near the field (source) - to save bee’s energy
- Migrate colonies near field at 10% flowering
- Place colonies at 3/ha - Italian bee; 5/ha - Indian honey bee
- The colonies should have 5-6 frame strength of bees, possess sealed brood, have
young mated queen
- Allow sufficient space for pollen and honey storage
Pollination by bees - Cross studies with selected crops

1. Sunflower
- It is a cross-pollinated crop
- Self incompatability noticed - i.e. The pollen a plant cannot fertilize ovary of
same plant
- Pollen should come from different plant
- Honey bees - Most important mode of pollination in sunflower
- Yield increase due to bee pollination - Even upto 600%
- Improves quality and quantity of seeds
- Oil content increases by 6.5% in seeds
- Requires 5 strong 4 C. indica colonies or 3 A. mellifera colonies
- Irrigated crop is preferred by bees
2. Cucurbitaceous vegetables
- Monoecious - Staminate and pistillate flowers in same plant
- 30-100% increase in fruit set due to bee pollination
3. Alfalfa or Lucerne
- Tubular flower - has 5 petals joined at base
- One large standard petal
- 2 smaller petals on sides
- 2 keel petals holding staminal column
- When bee sits on keel petal, staminal column strikes against standard petal and
pollen shatters
- This is called TRIPPING
- Only if bee sits to trips the flowers seed set occurs
4. Corinader
- Yield increase upto 187% noted when pollinated by bees
5. Cardamom
- Important commercial crop depending on bee pollination. Yield increase upto
21-37%
20 www.AgriMoon.CoM
6. Gingelly
- Another oilseed crop, bee pollination causes 25% increase in yield
7. Apple
- Only if pollinated by bees - feed set occurs
- Fruit is formed around seeds only
- If improper seed set - Fruit shape is lopsided (market value decreases)
Migratory Vs. Stationary beekeeping

- Migratory beekeeping - Advantageous to beekeeper and farmer
21 www.AgriMoon.CoM
Lecture 5 BEE PRODUCTS - THEIR PROPERTIES AND USES
1. Honey
2. Bees Wax
3. Royal Jelly
4. Bee Venom
5. Propolis
6. Pollen
1. Honey
- A sweet, viscous fluid - Produced by honey bees
- Collected as nectar from nectaries at base of flower
- Also collected from extra floral nectaries (nectar secreted by parts other than
flowers)
- Collected also from fruit juice, cane juice
Collection and ripening of honey

- Bee draws nectar by its tongue (proboscis)
- Regurgitated by field bees
- Collected by hive bees - Deposited in cells in comb
- Nectar contains 20-40% sucrose
- Invertase converts sucrose into dextrose (glucose) and levulose (fructose)
- Invertase is present in nectar itself and in saliva of honey
- Ripening of honey is by action of enzyme and by evaporation of water by
fanning of wings
Composition of fully ripened honey Per cent (Approx.)
Lrvulose 41.0
Dextrose 35.0
Sucrose 1.9
Dextrins 1.5
Minerals 2.0
Water 17.0
Undetermined (Enzymes, Vitamins, Pigments, etc.) 1.6
Pigments
Carotene, Chlorophyll, Xanthophyll
22 www.AgriMoon.CoM
Minerals include
Potassium, Calcium, Phosphorus, Sodium, Magnesium, Manganese, Copper,
Sulphur, Silica, Iron.
Vitamins
Vit B1 (Thiamine), B2 (Riboflavin), Nicolinic acid, Vit.K, Folic acid, Ascorbic acid,
Pantothenic acid.
Physical properties of honey

1. Honey is hygroscopic. If exposed to air it absorbs moisture
2. Honey is a viscous fluid. Heating of honey reduces viscosity
3. Specific gravity of pure honey is 1.35 - 1.44 gms/cc
4. Refractive index of honey - Helps to find moisture content measured using
refractometer
Purity test for honey

1. Measure specific gravity of honey using hydrometer
2. If the specific gravity is between 1.25-1.44 it is pure honey
Aroma and flavour of honey

1. Acquired from the nectar of the flower
2. Lost if heated or exposed to air for long time
Colour of honey
1. Depends on the nectar of flower (plant species)
2. Darker honey has stronger flower
3. Lighter honey has more pleasant smell
Fermentation of honey
- Honey containing high moisture can ferment
- Sugar tolerant yeast present in honey cause fermentation
- Fermentation more at 11-21oC
- Fermentation lends to formation of alcohol and carbondioxide
- Alcohol later converted into acetic acid
- Fermented honey sour in taste due to acidity
- Heating honey to 64oC for 30 min destroys yeast and prevents fermentation
Crystallization or granulation of honey

- This is a natural property of honey (particularly at low temperature)
- Dextrose present in honey granulate and suffer down
- Levulose and water remain top - More prone to fermentation
- High ratio of Levulose/Dextose (L/D) - Less granulation
- High ratio of Dextrose/Water (D/W) - More granulation
23 www.AgriMoon.CoM
Lecture 6: Effect of agricultural inputs on bee activity – Pesticide poisoning

The use of pesticides has become inevitable in modern agriculture. Most of
crops are attacked by some or the other pests. The control of insect pests, diseases and
weeds, in most cases is done by applying some pesticide. Pesticides used on field
crops for the control op pests have their own side effects, one of which is their
toxicity to honey bees. Honeybees are susceptible to many pesticides, especially
insecticides. Each year honeybee colonies are damaged or destroyed by pesticides,
primarily insecticides. Such losses have devastating impact on the beekeepers, who
may have to relocate damaged hives or perhaps even be forced out of business. It is
very difficult to assess the extent of losses of bees from pesticides. Three types of
harmful effects evident in agriculture are:
1. Loss in production of honey.

2. Contamination of bee products.
3. Reduction in the yield of cross-pollinated crops.
These effects may happen as a result of the direct exposure of bee fauna to
pesticides or through indirect contact with their residues. Direct exposure occurs from
treatment of bee hives with pesticides for disinfestation purpose or honey bees visiting
the fields at the time of spray. While the indirect exposure occurs from spray drift
from nearby fields or bee foraging in sprayed crops. Honeybees may also come in
contact with spray fluid spilled inadvertently or thrown in the watercourses.
Symptom’s of bee poisoning

Dead or dying bees near the entrance of hives /colonies.
Dead bees on the top of frames or bottom board.
Lack of recognition of guard bees.
General aggressiveness.
Fighting among bees at the entrance or inside of colonies.
24 www.AgriMoon.CoM
Paralysed or stupefied bees crawling on nearby objects of the colony and also on
blades of the grass.
Sudden cessation of food storage and brood rearing.
Dead and deserted brood in the hive.
Poor recognition of pollen and nectar.
And finally a depleted population of the colony.
Causes of poisoning
Bee poisoning mainly occurs when pesticides are applied to crop during bloom. It
may also be caused by drift of toxic chemicals onto non-target areas or bees
contacting residues of pesticides on plants for pollen and nectar and also bees
drinking or contacting contaminated water in watercourses or spillage. If the chemical
is highly poisonous the bees may get killed in or near the field. However, if the
chemical has delayed action the bees may reach their hives but die near the entrance.
Some of workers may even enter the hive and store nectar and pollen inside and thus,
result in exposure of the nurse bees to the contaminated pollen, carried by the foragers
and stored in the comb. The resultant cumulative effect of the contaminated pollen
may lead to depletion of brood, death of young ones, nurse bees and other workers.
Hence, not only the population of colony decreases substantially but also results in
contamination of bee products.
Factors of bee poisoning
Many factors involving pesticides affect the potential for honey bee poisoning.
The important factors are described below.
Plant growth stage: Severe bee poisoning most often results from spraying
insecticides directly on flowering plants, either the crop itself or flowering
weeds within its margins.
Relative toxicity of chemical: Pesticides vary in their toxicity to honeybees.
Among the pesticides, most fungicides and herbicides are relatively less toxic to
honeybees. Insecticides are most toxic. Honeybees are most vulnerable to broad-
spectrum insecticides. Insecticides that are highly toxic can not be applied to
blooming crop when bees are present without causing serious to colonies.
Insecticide like dimethoate, malathion, methyl parathion etc. carbaryl come
25 www.AgriMoon.CoM
under this category. However, insecticides like endosulfan are less toxic (Table
1).
Choice of formulation: different formulations even of same pesticide, often
vary considerably in their toxicity to bee. Dust formulations are typically more
hazardous than sprays because the are picked up on bee hairs. A wettable
powder such as Sevin 80 S, would usually remain toxic in the field for a longer
time than Sevin XLR Plus, an emulsifiable concentrate. Granular insecticides
are less hazardous to bee. However, microencapsulated materials such as
Penncap-M are particularly dangerous to use around bees because, the capsules
have a tendency to adhere to bees due to their size and electrostatic charge.
Residual action: Residual activity of an insecticide is an important factor in
determining its safety to pollinators. An insecticide that degrades rapidly can
generally be applied with minimum risk when bees are not foraging.
Drift: Drift of spray application can cause significant bee poisoning, particularly
when drift reaches colonies adjacent flowering weeds. In general sprays should
not be applied when wind speed exceeds 10 km/hr.
Temperature: Temperature can have a substantial effect on bee poisoning
hazard. If temperatures following treatment are unusually low, insecticide
residues can remain toxic to bee many times longer than if normal temperature
prevails.
Distance from treated fields: the most severally damaged colonies are usually
closest to fields where insecticides are being applied. However, during periods
of pollen or nectar shortage, hives within 6 – 7 km of the treated areas can be
injured.
Time of application: evening application of a short residual insecticide can
greatly reduce any potential for bee damage.
Minimizing pesticide hazards to bees / management practices
Proper understanding of above-mentioned principles can go a long way in
reducing pesticide hazards to honey bees. The basic principle, of course, is that
honey bees should not get exposed to the toxic effects of insecticides as far as
possible. Reducing pesticide injury to honeybees requires communication and
cooperation between beekeepers and farmers. Since both mutually benefit from
honeybees, the beekeeper in terms of its products and the farmer in terms of
26 www.AgriMoon.CoM
increased production of crops. While it is unlikely that all poisoning can be

avoided, a balance must be struck between the effective use of insecticides, the
preservation of pollinators and the rights of all – the beekeeper, farmers and the
community.
GUIDELINES FOR BEEKEEPERS

It is most desirable that bee colonies should be maintained where use of pesticides or
drift from pesticides is minimum. For this, the beekeeper should be fully
conversant with the type of pesticides used in their locality, which in turn
depends upon the cropping pattern and the pest complex. He / she should also be
aware of normal wind currents prevalent in that area to protect against the
harmful effects from drift.
If ever disinfestation of beehives becomes necessary he / she should use only the
recommended chemicals, safe to the bees, for the purpose.
During bloom if the crops in the surrounding areas are being sprayed with the
insecticides, it is always advisable to confine the bee within the hives. If it is
apprehended that the spray programme will continue for a longer period, it is
better to move the hives away to the safe location free from the drift in advance.
Apiarists and farmers should have close cooperation so that beneficial activity of
bee is not jeopardized by the irrational use of pesticides by the latter.
Feeding of colonies with sugar syrup following pesticide application to reduce bee
foraging may help substantially in reducing the exposure of bees to pesticides
Bee repellent like Methyl salicylate and MGK 874 (2 – hydroxyethl – N octyl
sulphide) also reduces bee foraging
Addition of (adjuvant) Sylgard 309 silicone surfactant reduced honey bee mortality
for some insecticides
Carbolic acid and creosite reduced activity of bees on cotton for few hours
27 www.AgriMoon.CoM
GUIDELINES FOR FARMERS

The golden principle for the farmers is to use insecticides only when necessitated. For
this purpose, integrated pest management approaches are available on most crops,
which should be strictly practiced.
It is in the mutual interests of both that the farmer should intimate the spray
programme in advance to the bee keeper.
If there is a choice for insecticides, the use should be restricted to the chemicals in the
less hazardous groups.
The spray operation in the evening is always preferable as it not only gives better
deposit and distribution (because of invert current) but also bee activity subsides.
Apply granules or sprays in preference to dusts. Pesticide formulation containing

attractants like Sevimol, used for fruit fly control, should be discouraged as for as
possible during the crop in bloom.
Examine fields and field margins before spraying to determine if bees are foraging on
flowering weeds. Where feasible eliminate weeds by mowing or tillage.
Give careful consideration to position of bee colonies relative to wind speed and
direction. Changing spray nozzles or reducing pressure can increase droplet size
and reduce spray drift.
Table 1 Select list of insecticides according to bee hazard categories

Insecticide Formulation
High hazard class category
Carbaryl D, WP
Cypermethrin EC
Deltamethrin EC
Diazinon D, EC
Dichlorvos EC
Dimethoate EC
Fenitrothion EC
Fenthion EC
Fenvalerate D, EC
Malathion D, ULV, EC
Monocrotophos EC
Methyl parathion D, EC
Methomyl D, WP
Low hazard category

Endosulphan EC
28 www.AgriMoon.CoM
Fenthion G
Phorate G
Aldicarb G
Carbofuran G
Phosalone EC
Fluvalinate EC
Menazon EC
Since pesticides are indispensable for crop protection, as an alternative scientists

are continuously looking for such chemicals which are selective and repellent to
bees, in addition to the development of a bee strain resistant to toxic effects of
pesticides.
Beekeepers on their own through their organizationz may approach the enforcement agency for
amendments in The Insecticides Act, 1968 for getting protection to these beneficial insects which is
possible by restricting use of pesticides in apiculture zones.
29 www.AgriMoon.CoM
Lecture 7: Role of pollinators, weed killers and other beneficial insects
I. Role of pollinators
Pollination refers to the transfer of anther to stigma in flowering plants for sexual
reproduction.
Insects aid in cross pollination in fruits, vegetables, ornamentals, cotton, tobacco,
sunflower and many other crops.
Insect pollination helps in uniform seed set, improvement in quality and increase
in crop yield.
Entomophily refers to cross pollination aided by insects
Pollination classes Type of insects

Melitophily Bees
Cantharophily Beetles
Myophily Syrphid and Bombylid flies
Sphigophily Hawk moths
Psychophily Butterflies
Phalaeophily Small moths
1.Honeybees as pollinators
All bee species aid in pollination

Value of honey bees in pollination is 15-20 times higher than that of the honey
and wax it produces.
Per cent increase in yield due to bee pollination
Mustard - 43%
Sunflower - 32 - 48%
Cotton - 17 - 19%
Lucerne - 112%
Onion - 93%
Apple - 44%
Cardamom - 21-37%
2. Hoverflies Syrphus sp. (Syrphidae:Diptera)
Brightly coloured flies

Body is striped or banded with yellow or blue
Resemble bees and wasps
Larval stage predatory, adults are pollinators
Crops pollinated - carrot, cotton, pulses
3.Carpenter bee, Xylocopa sp. (Xylocopinae:Anthophoridae)
30 www.AgriMoon.CoM
Robust dark bluish bees with hairy body

Dorsum of abdomen bare, pollen basket absent
Adults are good pollinators
Construct galleries in wood and store honey and pollen
4. Digger bees, Anthophora sp. (Anthophoridae:Hymenoptera)
Stout, hairy, pollen collecting bees

Abdomen with black and blue bands
5. Fig wasp Blastophaga psenes (Agaonitae:Hymenoptera)
Fig is pollinated by fig wasp only. There is no other mode of pollination.

There are two types of fig Caprifig and Symrna fig.
(i) Caprifig
a. It is a wild type of fig - not edible

b. Has both male and female flowers
c. Pollen is produced in plenty
d. Natural host of fig wasp
(ii) Smyrnafig
a. It is the cultivated type of fig - Edible

b. It has only female flowers
c. Pollen not produced
d. Not the natural host of fig wasp
Fig wasp: Male - wingless, present in caprifig

Female - winged
wasp lays eggs in caprifig, larvae develops in galls in the base of the flowers
mates with female even when the is inside gall
Mated wasp emerges out of flower (caprifig) with lot of pollen dusted around its
body.
The fig wasp enters smyrna fig with lot of pollen and deposits it on the stigma
But it cannot oviposit in the ovary of symrna fig which is deep seated
It again moves to capri fig for egg laying. In this process smyrna fig is pollinated
Caprifig will be planted next to smyrna fig to aid in pollination
6. Oil palm pollinating weevil: Elacidobins kamerunicus (Curculionidae :

Coleoptera)
Aid in increasing oil palm bunch weight by 35% and oil content by 20%
7. Other pollinators
31 www.AgriMoon.CoM
Butterflies (eg Deilaphila spp.) and moths (Acherontia spp.)

Ants, flies, stingless bees, beetles etc.,
II.WEED KILLERS
Insect which help in controlling weeds by feeding on them are called weed
killers.
1. Dactylopius tomentosus cochnieal insect to control prickly pear Opuntia dillenii
This insect was introduced into India in 1925. Within 5-10 years it controlled
the weed.
2. Aristalochia butterfly, Papilio aristolochiae (Papilionidae:Lepidoptera). It feeds

on Arista lochia which a weed.
3. Caotropis butterfly - Danaus chrysippus (Nymphalidae:Lepidoptera) - feeds on

calotropis.
4. AK Grosshopper - Poecilocerus pictus (Actididae:Orthoptera)
Feeds on Calotropis and controls it
5. Water hyacinth weevil Neochetina eichhorniae and N. bruchi
The larvae tunnel and feed inside the petioles. Ten pairs of adults and progeny
controls plant growth in 0.58 m2.
6. Parthenium weed killer, Zygogramma bicolorata (Chrysomelidae:Coleoptera)
Adults and grubs feed on leaves and flowers. 2 beetles controls and destroys
one plant in 45 days.
A successful weed killer has following qualities
Should not be a pest of cultivated plants - at present or in future

Effective in damaging and controlling the weed
Should be a borer or internal feeder of the weed
Should not be affected by parasitoids/predators
III. SCAVENGERS
Insects which feed on dead and decaying plant and animal matter are called
scavengers.
Remove decomposing material and prevents health hazard

Convert complex material into simple substances
32 www.AgriMoon.CoM
a. Rove beetles (Staphylinidae:Coleoptera)

Adults and larvae feed on decaying matter
b. Chafer beetles (Scarabaeidae:Coleoptera)
c. Darkling beetles (Tenebrionidae:Coleoptera)
d. Nitidulids (Nitidulidae:Coleoptera)
e. Water scavenger beetle (Hydrophilidae:Coleoptera)
f. Daddy long legs (Tipulidae:Diptera)
g. Muscid flies (Muscidae:Diptera)
h. Termites (Isoptera)
i. Ants (Hymenoptera)
IV. INSECTS OF AESTHETIC VALUE
Insects which are beautiful are admired
Jewel beetle (Buprestidae:Coleoptera)

- necklaces, bracelets and made of whole insects
Nymphs of scale insects - made as stings
Butterflies - symbol of beauty
V. SOIL BUILDERS
Insects which live in soil, male tunnels. During this process, the soil
disintegrates, and soil aeration is facilitated. Subsoil is brought to the surface.
Excreta of insects also enrich the soil.
eg. Beetles, ants, cutworms, larvae of flies, crickets, termites, wasps etc.,
VI. INSECTS OF SCIENTIFIC VALUE
1. Fruitflies - Drosophila melanogastes
Useful in biological investigations such as cytology, and genetics for studying

principles of inheritance.
These flies have short life cycle, easy to culture and multiply - They have
large chromosomes and easily recognizable heritable variations.
2. Mosquitoes - Used in bioassay of insecticide residues

3. Cockroaches - Used in Zoology and Entomology courses, also used in nutritional
studies
VII. INSECTS AS FOOD
Termites, grubs of beetles are being used as food

They are rich in protein
MANAGEMENT OF HOUSEHOLD PESTS, VECTORS OF HUMAN DISEASES
AND PESTS OF CATTLE AND POULTRY
Lecture 8:
33 www.AgriMoon.CoM
I.HOUSEHOLD PESTS AND VECTORS OF HUMAN DISEASES
1. Housefly Musca nebulo (Muscidae:Diptera)
Biology: Larvae - feed on decaying organic matter, faeces etc.,

Adults - Frequent human dwelling and transmits diseases
Damage
• Source of nuisance
• Transmits many diseases in human beings such as diarrhoea, dysentry, cholera,
typhoid, enteric fevers, tuberculosis, leprosy, anthrax, trachoma, gonorrhoea and
many helmithic diseases.
Management
Proper disposal of manure, garbage, sewage, human excrement, dead animals

etc., Covering manure pits with soil.
Inside houses, spraying with malathion/diazinon 2%, lindane 1% or tricholorphon
0.5%. The deposits are effective for long periods.
Smearing doors and windows with malathion 3% or diazinon 1.5% emulsion
with a bruch.
Using fly swatters to manually kill flies.
Protecting eatables from flies to prevent transmission of diseases.
Use of poison baits such as formaline + sweetened milk (or) fermented banana +
milk or cheese + sugar + insecticide
2. Mosquitoes
Culex sp., Anopheles sp., and Aedes sp. Culicidae : Diptera
More than 2500 sp world wide
Mosquitoes
Biology : Egg, larval and pupal stages spent in water, marshy lands, stagnant
ponds etc.,
Adults cause problem to humans and animals.
Damage : Their bile causes itching and irritation (Females only bite and suck
blood)
Diseases transmitted
Anopheles sp. transmits malaria (caused by Plasmodium sp.)

Culex sp. transmits filariasis (caused by Wuheretia bancrofti)
Aedes sp. transmits dengue fever, encephalitis and yellow fever
Management of mosquitoes
34 www.AgriMoon.CoM
w Stagnant water should be drained (or) treated with 0.025% malathion

emulsion. Kerosine oil can also be used.
w Grasses and weeds around buildings should be cut or sprayed with 1%
malathion every week when mosquitoes are active.
w Mosquito nets or repellents such as citronella oil (creams).
w Adults can be killed with space sprays of propreitary products such as
pyrethrins, dichlorvos, synthetic pyrethroids.
w Spray human dwellings, cattle shed with lindane 0.5 g/m2 and propuxur,
fenitrothion and malathion 2 g/m2.
3. Sandflies Phlebotomus argentipes (Psychodidae:Diptera)
Larvae found in decaying organic matter.
Damage
Adults cause painfaul bite, itching and swelling

Transmits diseases in man like kala-azar, three day fever, tropical ulcer etc.,]
Transmits anthrox in cattle
Management
w Cleanliness in and around human inhabitations

w Surface spraying with Lindane 5% as residual spray
w Insecticides recommended for mosquito control
w Pyrethrum oinment to repel the sand flies
4. Eye flies Siphunculina funicola (Chloropidae : Diptera)
Breeds in decomposing organic matter, near latrines, stables and drains.
Damage
• Frequents the eye with buzzing sound and feeds on eye secretions
• Transmits diseases like Conjunctivitis and Ophthalmia
Management
✔ Good sanitary and hygienic condition
5. Human lice
Head louse Pediculus capitis Pediculidae:

Body louse Pediculus humanus Siphunculata or Phthiraptera
Crab louse Phthirus pubis
Damage
• Biting causes cutaneous lesions, itching
35 www.AgriMoon.CoM
• Severe infestation by lice is called pediculosis - discolouration hardening and

ulceration of skin
• Transmits diseases like typhus, trenchfever, European relapsing fever
Management
Powder containing malathion 2% or lindane 1% is effective in delousing on

clothes
On infested head/body lindane 0.2% mixed in hair oil or lotions containing 0.2%
lindane
Cleanliness to have constant relief
6. Rat fleas: Xenopsylla cheopsis (Pulicidae:Siphonaptera)
Damage
• Painful bites - cause irritation, itching on skin
Transmits bubomic plague - caused by bacterium Pasteurella pestes which affects

both rats and humans.
Also transmits endemic or murine typhus
Management
Keep houses rat free by poison baits

Cleaniless, proper ventilation and occational spraying with malathion 0.5% or
lindane 1%
7. Cockroaches
Periplanata americana, Blatela germanica, Blatella orientalis

Blathidae:Dictyoptera
Live in dark unclean kitchens, restaurants, filthy places
Damage
• Starchy material are ruined by excreta, offensive smell

• Feed on damp books and leather articles
Management
Observing cleanliness
Sealing pipelines and drains leading to basement
Spraying room with malathion / chlorpyriphos 0.5% without contaminating food
material
Combined application of dichlorvos 0.5% (quick knock down) and persistent
insecticide (Chlorpyriphos)
36 www.AgriMoon.CoM
8. Crickets Grylloides sigillatus, Acheta domesticus Gryllidae:Orthoptera
Damage
• Nuisance and disturbance to humans by producing monotonous chirping sound

produced at night
• Eat food and clothings
Management
Dusting corner and floors with malathion / carbaryl 5% dust at night (care not
to contaminate food)
9. Bed bugs
legion
Cimex hemipterus (Tropical) Cimicidae:Hemiptera
Cimex lectularius (Temperate)
Damage
Nymphs and adults suck blood and inject toxic saliva during night- (irritating, painful,
itching) (Does not transmit any diseases)
Management
Exposing bed, bedsheets to hot sun will kill bed bugs

Using steel cots instead of wooden cots
Applying kerosine, turpentine or petroleum oils in furniture
Treating furniture with malathion 1% or lindane 0.1%
10. Silverfish
Lepisma saccharina, Thermobia domestica Lepismatidae : Thysanura
Management
Cleaning and ventilation.

Use of naphthalene balls in cupboards
11. Other minor household pests
Ants, termites, book lice, wood boring, beetles, carpet beetles, cloth moth.
MANAGEMENT OF PESTS OF CATTLE AND POULTRY
Farm animals are attacked by pests under following categories
1. Blood sucking flies (Adults - flies suck blood)
37 www.AgriMoon.CoM
2. Myiasis flies (Tissues eaten by maggots of flies)

3. Lice - (a) sucking lice (b) biting lice
4. Fleas
5. Arachnids - (a) Ticks (b) Mites
I. Blood sucking flies
a. Sand flies: Phlebotomus argentipes (Psychodidae:Diptera)
Damage
Both male and female flies such blood from horses, dogs, man and cattle
Causes weakening and reduction of milk
Transmits anthrox in animals
b. Horseflies: Tabanus striatus (Tabanidae:Diptera)
Other species Chrysopa sp., Hamatopota sp.
Damage
• Females are blood suckers - even on running animals

• Animal weakened, loses lot of blood
• Transmits anthrox
• Attacks horse, cattle, camel, elephant, rarely man
c. Stableflies Stomoxys calcitrans (Muscidae:Diptera)
Damage
Bite causes itching, pain, restlessness in animals

Reduction in milk yield
Transmits diseases like anthrax, surra, swamp fever, Trypanosomiasis and
Leishmaniasis in animals
d. Hornflies: Haematobia irritans (Tahinidae:Diptera)
Damage
• Both sexes suck blood from neck region from cattle, goats, horses, gods and sheep
• Transmits anthrax
e. Dogflies: Hippobosca maculata (Hippoboscidae:Diptera)
Damage
Permanent ectoparasites on cattle, horse, dog, goat, sheep

Painless but irritating bite cause annoyance
38 www.AgriMoon.CoM
Management of blood sucking flies on cattle
w Elimination of breeding of flies through cleanliness

w Residual spray of cattle shed with lindane 5% or diazion 1%
w Draining stagnant water to prevent breeding
w Spraying 0.1% pyrethrin + 1% piperonyl butoxide at 1-2 lit/animal, twice or
thrice a week
w Cover or dry the fresh dung as it attracts egg laying by hornflies
w To manage dog flies, apply malathion 5% dust on neck, back and flanks of
animal every 10-14 days
II. MYIASIS FLIES
Myiasis refers to an infestation of living organs or tissues of man and other

mammals by maggots (larvae) of flies (order Diptera) and disturbances resulting
therefrom
caused by insects belonging to Calliphoridae (Blousflies)

Oestridae (Botflies, warble flies), Sarcophagidae (Flesh flies)
Atrial myiasis - Cavities on body

Types of Cutaneous myasis - Skin
myasis Intestinal myasis - Intestine
Enter through wounds - Wound
Botflies
1. Horse botfly - Gastrophilus intestinalis, G. nasalis (Oestridae:Diptera)
Damage
• Eggs laid on body of animal - while licking gets into intestine - larva develops
inside intestine
• Maggots injure tongue, stomach and intestine
• Animal dies if not treated
Management
If larva detected in faeces - give 25 ml tolerance or 1.5 g carbon disulphide / 100 kg

body weight in gelatin capsule to horse.
2. Oestrus ovis Sheep bot fly (Oestridae:Diptera)
Maggots attacks nasal passage of sheep - discharge of mucus, distress to the

sheep.
39 www.AgriMoon.CoM
Management
Irrigating the sheep’s nostrils with 3% lysol

Carbondsulphide + Paraffin injection into nostrils
3. Warble fly/Heal fly: Hypoderma lineatum (Oestridae:Diptera)
Cutaneous/subcutaneous myiasis caused

Causes holes in skin - less value
Even causes eye myiasis
Management
w During monsoon, hair close to loof may be cut to prevent egg laying
w Treating animal with 1% trichlorphon or 0.05% rotenone every 45 days when
warbles appear on skin
Blowflies
Chrysomyia bezziana (Calliphoridae:Diptea)

Cochliomyia hominivorax, Calliphora, Lucilia, Phormia sp.
Also called screw worms

Cause cutaneous myiasis by entering through wound/sores
Management of blowflies
w Disposal of carcasses to prevent egg laying

w Removing maggots with forceps after spraying with 5% chloroform
w Dressing wounds with pine oil which is a repellent
III. LICE
a. Sucking lice: Has sucking mouth parts
1. Cattle louse: Haematopinus eurystermus (Haematopinidae:Siphunculata)
Ectoparasites on cattle, cling, bite and irritate
Management (Delousing) DELOUSNG CATTLE
w Applying linseed oil all over the body could kill lice
w Malathion 5% dust or 0.5% suspension spray/dip of animal
b. Biting lice: Has biting and chewing MP
Bevicola caprae (on goat) B. ovis (on sheep); B. bovis (on cattle)
(Trichodectidae:Mallophaga)
40 www.AgriMoon.CoM
Menopon gallinae (Menoponidae:Mallophaga)

Shaft louse of focol (on birds)
Feed on feathers of birds and cause annoyance
Menacanthus stramineus (Chicken body louse)
Prefers skin to feathers
Management of biting lice on birds (Delousing birds)
Spray individual chicken or in groups with 0.5% carbaryl or malathion (5 lit/100

birds)
Apply 5% Malathion / Carbaryl dust on individual birds @ 500 g/100 birds
On walls and ceiling spray 3% malathion
Delousing birds not only removes the lice but also poultry tick and fleas.
IV. FLEAS
a. Poultry stick fast fleas Echidnophaga gallinacea (Hectosyllidae : Siphonaptera)
Attack comb, wattle, around eyes, beaks

Birds become anaemic and egg production reduced
V. ARACHNIDS
Ticks (1) Boophilus microplus cattle tick
Cause inflammation and haemarrhage

Produce tick paralysis
Transmits tick fever, texas fever, tulanemia
Management
Careful removal with hand/forceps along with capitulum

Use 1% lindane dust or 5% malathion dust
2. Poultry tick: Argas persicus (Fowl tick)
Suck blood, causes weakness, annoyance

Transmits fowl diseases
Mites: Sarcoptes scabiei called mange mite
Mite damages or eats the skin

Ecto parasite on horse, cattle, mule, sheep, goat
Management
Repeated application of powdered sulphur in vegetable oil
41 www.AgriMoon.CoM
Lecture 8 Insect ecology and balance of life
Ecology:
The term ecology is derived from the Greek term “oikos” meaning “house”
combined with “logy” meaning “the science of” or “the study of”. Thus literally
ecology is the study of earth’s household comprising of the plants, animals,
microorganisms and people that live together as interdependent components. The term
ecology was coined by a German biologist Ernst Haekel (1869).
Definition of Ecology
Ecology can be defined as the science of plants and animals in relation to their
environment.
Webster’s dictionary defines ecology as “totality of pattern of relation between
organisms and their environment.”
Eugene P. Odum defined ecology as “the study of organisms at home”
Insect Ecology may be defined as the understanding of physiology and
behaviour of insects as affected by their environment.
Ecology related terminology
i. Habitat is the place where the organism lives.
ii. Population denotes groups of individuals of any kind of organism. Insect

populations are groups of individuals set in a frame that is limited in time and
space.
iii. Community in the ecological sense includes all the populations of a given
area. Community can also be defined as interacting ‘web’ of populations
where individuals in a population feed upon and in turn are fed upon by
individuals of other populations (Fig. 1)
iv. Ecosystem
Ecosystem or ecological system is the functioning together of community and

the nonliving environment where continuous exchange of matter and energy
takes place.
In other words ecosystem is the assemblage of elements, communities and
physical environment.
Ecosystem is the ultimate unit for study in ecology as they are composed of
living organisms and the nonliving environment.
42 www.AgriMoon.CoM
Examples of natural ecosystem: Ponds, lakes and forests ecosystem (Fig.2)
v. Biosphere is the term used for all of the earth’s ecosystems functioning
together on the global scale.
Living Genes Cells Organs Organisms Populations Communities

components
+
Nonliving
components Matter Energy
Biosphere
= Biosystems
Gene Cell Organ Organism Population Ecosystem
System system system system system system
Figure 3. Flow of matter and energy in an ecosystem
Agroecosystem is largely created and maintained to satisfy human wants or

needs. It is not a natural ecosystem but is man made. Agroecosystem is the basic unit
of pest management - a branch of applied ecology.
A typical agroecosysyetm (Fig. 4) is composed of
i. more or less uniform crop-plant population

ii. weed communities
iii. animal communities (including insects)
iv. microbiotic communities
v. and the physical environment the react with.
Unique features of Agroecosystem

Dominated by plants selected by man
No species diversity and no intraspecific diversity. Genetically uniform
Phenological events like germination, flowering occur simultaneously
Lack of temporal continuity - due to various agricultural operations carried out
by man like ploughing, weeding, pesticide application etc.
Plants contain imported genetic material
Nutrients are added
Outbreak of pests, weeds and diseases occur frequently
43 www.AgriMoon.CoM
Balance of Nature
Balance of Nature is defined as the natural tendency of plant and animal

population resulting from natural regulative processes in an undisturbed ecosystem
(environment) to neither decline in numbers to extinction nor increase to indefinite
density.
In unmanaged ecosystems, a state of balance exists or will be reached, that

is species interact with each other and with their physical environment in such a way
that on average, individuals are able only to replace themselves. Each species in the
community achieves a certain status that becomes fixed for a period of time and is
resistant to change which is termed as the balance of nature.
When man begins to manage creating new ecosystem (agroecosystem)

where natural ecosystem existed previously, the balance is altered. The exceptionally
strong forces react in opposition to our imposed change toward a return to the original
system (e.g. outbreak of a pest is one of the forces). So insect pests are not ecological
aberrations. Their activities counter wants and needs of human populations.
Factors that determine insect abundance
i) Biotic potential
It is the innate ability of the population to reproduce and survive. It depends

on the inherited properties of the insect i.e., reproduction and survival. Potential
natality is the reproductive rate of the individuals in an optimal environment.
Survival rate depends on the feeding habits and protection to young ones (eg.
Viviparity). Generally insects with high reproductive rate tend to have low survival
rate and vice versa.
Insect pests with high reproductive rate and low survival rate are called r
strategists named after the statistical parameter r, the symbol for growth rate
coefficient. Such pests succeed because of sheer numbers. E.g. Aphids.
K strategists reproduce slowly but effectively compete for environmental

resources and so their survival rate is high. (K letter denotes flattened portion of
growth curve) eg. Codling moth of apple.
Birth rate or natality is measured as the total number of eggs laid per female
per unit time. Factors determining birth rate are fecundity, fertility and sex ratio.
Death rate or mortality denotes the number of insects dying over a period.
44 www.AgriMoon.CoM
Example of High reproductive rate
A single moth of Earias vitella (Bhendi fruit borer) lays about 200 eggs per
female. Life cycle is completed in 1 month
After 1 month 200 adults
100 male+ 100 female
100 x 200 = 20,000 eggs
After 2nd month 10,000 x 200 = 2,000,000 eggs
After 1 year 2,000,000,000,000,000,000,000,000

adults
(i.e., 2 followed by 24 zeroes)
If a single moth can produce this much, they will cover 24.32 above earth
surface in 1 year. But in reality only a fraction of progeny completes life cycle due to
environmental resistance.
Environmental resistance is the physical and biological restraints that

prevent a species from realizing its Biotic potential. Environmental resistance may be
of 2 types.
1. Biotic factors - includes

a) Competition (interspecific and intraspecific)
b) Natural enemies (predators, parasites and pathogens)
.
2. Abiotic factors -
a) Temperature
b) Light
c) Moisture and water
d) Substratum and medium
BIORESOURCES IN ECOSYSTEM
Ecosystem comprises of biological communities and non-living environment.
e.g. Agro ecosystem, pond ecosystem, etc.). Bioresources refers to the biodiversity
of various organisms living in that ecosystem.
45 www.AgriMoon.CoM
e.g. The different pests of cotton, its natural enemies, hyperparasitoids, microbes, etc.
are referred to the bioresources in cotton ecosystem.
The ecosystem should have more bioresources. Such ecosystem will be

more stable. Insecticides will deplete the bioresources in ecosystem and make it less
stable and prone to pest outbreak.
Natural control will be high when bioresources (e.g. Parasitoids and

Predators) are more.
46 www.AgriMoon.CoM
Lecture 9 : Population dynamics and role of biotic factors
Attributes of a population
i. Density : Population size per unit area

ii. Birth rate (Natality) : Rate at which new individuals are added to the
population by reproduction
iii. Death rate (Mortality) : The rate at which individuals are lost by death.
iv. Dispersal : The rate at which individuals immigrate into and emigrate out of
the population.
v. Dispersion: the way in which individuals are distributed in space. It may be of
3 types.
a) Random distribution
b) Uniform distribution
c) Clumped distribution
vi. Age distribution: the population of individuals of different ages in the group.
vii. Genetic characteristics : adaptiveness, reproductive fitness, persistence.
viii. Population growth form: the way in which population changes / grows as a
result of natality, mortality, and dispersal.
Population dynamics.
Populations grow in two contrasting ways. They are
i. J- shaped growth form (Fig 1a)

ii. S- Shaped or sigmoid growth form (Fig 1b)
N K
Density Density
Time Time
Fig. 1a. J- shaped growth form Fig. 1b. S - shaped growth form.
47 www.AgriMoon.CoM
In the J - shaped growth form, the population density increases in exponential

or geometric fashion; for example 2,4,8,16,32 … and so on until the population runs
out of some resource or encounters some limitation (limit N, Fig 1a). Growth then
comes to a more or less abrupt halt and density declines rapidly. Populations with this
kind of growth form are unstable. Their reproductive rate is high and survival rate is
less and so they are r strategists. Factors other than density regulates the
population.(eg; Aphids).
In the S-shaped growth pattern (Fig 2) the rate of increase of density decreases
as the population increases and levels off at an upper asymptote level K, called the
carrying capacity, or maximum sustainable density. Their reproductive rate is less and
survival rate is more. So they are K strategists. This pattern has more stability since
the population regulates itself.(eg Hymenopterans).
The population growth rate or change is worked out using the formula,
Nt = N0e(b-d)t - Et + It
Where Nt = number at the end of a short time period
N0 = number at the beginning of a short time period
e = base of natural logarithm = 2.7183
b= birth rate
d= death rate
t= time period
E= emigration
I = immigration.
Life table: Life tables are tabular statements showing the number of insects dying
over a period of time and accounting for their deaths.
Example of a life table for a lepidoperan insect
Number living Percent

Number dying
Stage beginning of Cause of death reduction
by end of stage
stage during stage
Egg 200 10.0 Parasites
20.0 Other 15
Early larva 170 136.0 Dispersal 80
Late larva 34 13.6 Parasites
6.8 Disease
10.2 Other 90
Pupa 3.4 0.3 Parasites
0.5 Other 25
Adult 2.5 0.5 Miscellaneous 20
48 www.AgriMoon.CoM
Factors influencing population growth.
a) Biotic factors or density dependent factors.

b) Abiotic factors or density independent factors.
Biotic factors
1) Competition : For at least part of the lifetime the members of an insect species are
likely to be competing with one another or with members of another species for
limited resources like food, mates, suitable site for oviposition or pupation. Such
competition operates whenever the population is increasing and the resources are
limited.
a) Intraspecific competition: When members of population of the same
species compete for resources we call it intraspecific competition. Examples are as
follows
� Cannibalism in American bollworm larvae

� Cannibalism in later stage grubs of Chrysopid
� Crowding in aphids result in alate (winged) form for migration
� Reduction in fecundity (egg laying) in rice weevil, Sitophilus oryzae during
overcrowding
� Crowding in honeybees leads to swarming
b) Interspecific competition. This is the competition occurring between

members of two or more species. Two or more competing species with identical
requirements cannot coexist in a same place for a long time. The elimination of
one species by another as a result of interspecific competition has come to be
known as the competitive exclusion principle or Gause’s principle.
� For example when flour beetles Tribolium castaneum and Tribolium confusum
were grown in the same jar of flour, one species eliminates the other. Under
high temperature and RH conditions T. castaneum eliminates T.confusum and
vice versa under low temperature and RH conditions.
� Accidental introduction of oriental fruit fly Dacus dorsalis into Hawai
eliminated Mediterranean fruit fly Ceratitis capitata.
2) Predators and Parasites

Predators : Predators are free living organisms that feed on other animals,
their prey, devouring them completely and rapidly.
� Predators may attack immatures and adults.

� More than one individual of prey required for predator to reach maturity
49 www.AgriMoon.CoM
� Major insect predators are birds, fish, amphibians, reptiles, mammals and
arthropods
Parasites: An organism that is dependent for some essential metabolic factor on

another throughout its all life stages, which is always larger than itself
� A parasite weakens or kills the host while feeding

� Many parasites on asingle host
� Requires only one part of one host to reach maturity
Eg. Virus, fungi, bacteria, protozoa, nematodes and other arthropods.
Parasitoid: An insect parasite of an arthropod that is parasitic in its immature stage

killing the host in the process of development and adults are free living.
Interactions between predator and prey are different from the parasite host relationship
in that the predator and prey maintain equilibrium more dynamically than the parasite and its host.
The parasites I n general when the rate of parasitism is high, cause death and result in elimination
of hosts. But the predator never eliminates the prey completely.
50 www.AgriMoon.CoM
Lecture 10 Abiotic factors on insect population

- Physical factors
- Nutritional factors
- Host associated factors
Physical factors
- Temperature, light, wind, soil conditions influence development, longevity,
reproduction and fecundity of insects
- Population density fluctuates depending on weather
- Extreme weather causes mortality of pests
Temperature
- Insects are poikilothermic - do not have mechanism to regulate body temperature
- Body temperature depends on environmental conditions
w Preferred or Optimum temperature is the temperature at which normal

physiological activities take place - insects survive at this temperature.
w Upper lethal limit - 40-50oC (even upto 60oC survival in some stored product
insects)
w Lower lethal limit - Below freezing point e.g. snow fleas
w The total heat required for completion of physiological processes in life - history
is a constant - thermal constant.
w At low temperature (winter) insect takes more days to complete a stage (larval or
pupal stage)
w At high temperature (summer) it takes less than to complete a stage.
w Some insects when exposed to extremes of temperature
w Undergo - Aestivation (during summer) or Hibernation (during winter)
w During this period, there is a temporary developmental arrest, metabolic activities
suspended. When temperature is favourable, they resume activity.
w Eggs undergo aestivation in summer
w Larva, pupa commonly undergo hibernation in winter
Influence of temperature on fecundity (egg laying)

Grasshopper lays 20-30 times more eggs at 32oC compared to 22oC
Oviposition of bed bug inhibited at 8-10oC
Other effects of temperature
- Early shoot borer of sugarcane attacks more high temp.
- Larval period of sugarcane internode borer
very short 16-24 days in summer
prolonged 141-171 days in winter
- Swarm migration of locust occurs at 17-20oC
51 www.AgriMoon.CoM
MOISTURE/HUMIDITY
- Moisture required for metabolic reactions and transportation of salts in insects
- War layer of cuticle prevents water loss
- Other adaptations - Morphological, physiological prevent moisture loss in insects
- Moisture scarcity leads to dehydration and death of insects - but very rare
- Excessive moisture can be harmful in following ways
i. Affects normal development and activity of insects
ii. Encourages disease causing pathogens on insects
Examples
- White halo fungus Verticillium lecanii on coffee green scale Coccus viridis
requires high RH for multiplication and spread
- High RH induces BPH in rice and aphids in other crops
- Termites prefer high humidity 90-95% RH
- Low RH in rainfed groundnut crop induces leaf mines incidence
Light
The following properties of light influence insect life
i. Intensity and illumination
ii. Quality or wavelength
iii. Duration or Photo period
Photoperiodism
The response of organisms to environmental rhythms of light and darkness
Photo period
Each daily cycle inclusive of a period of illumination followed by a period of
darkness
- Photo period influences induction of diapause (a resting stage) in most of the
insects e.g. Long day during embryonic development causes adult to lay
diapausing eggs in Bombyx mori.
- Seasonal dimorphism occurs in aphids due to change in photo period
- Short day - Sexual forms
- Long day - Asexual - Parthenogenetic forms
- Some insects are active in night - Nocturnal
Some are active during the day - diurnal
Some active during dawn and dusk - Crepuscular
- Fruit flies lays eggs in dark
- Lepidopterans like cotton bollworm, Red hairy caterpillar (RHC) oviposit in dark
Rainfall
- Rainfall is essential for adult emergence of cutworms and RHC
- Heavy rain washes aphids, diamond back moth (DBM)
52 www.AgriMoon.CoM
- Intermittent low rain increases BPH and thrips
Wind
- Interferes with feeding, mating, oviposition
- Wind aids in dispersal of insects
- Aphids, mites (Eriophyid mites also) disperse through wind
- Helicoverpa flies upto 90 km with the aid of winds
Topgraphy
Mountains, lakes, sea, etc. act as physical barrier for spread of insects
Soil Type
Wire worm, multiplies in clay soil with poor drainage
White grubs and cut worm - multiply in loose soil with good drainage
Water Current
Standing water aids in multiplication of mosquitoes
Running water is preferred by Odonata and Caddis flies
NUTRITIONAL FACTORS
Insects heterotrophic - cannot synthesize their own food
- depend on plants for food
The quantity and quality of food/nutrition plays important role in survival, longevity,
distribution, reproduction and speed of development
a. Quantity of food
- Short supply of food causes intranspecific and interspecific competition
- Also affects parasitoids and predators of insects hosts whose food is of short
supply
b. Quality of food
- This depends on nutritional availability of plants
- Crop varieties/species differ in nutritional status which affects insects
Host plant associated factors

Antixenosis or non preference
Host plant not preferred by insects for feeding, oviposition or shelter due to
morphological characters like thorns, wax, hairyness, etc. or done to presence of some
chemicals (called allelochemicals)
53 www.AgriMoon.CoM
Antibiosis
This refers to adverse effect of the host plant on biology (survival, dept, reprdn.) of
insects and their progeny due to
- Presence of toxic substance in plant
- Absence of essential substances
- Presence of enzymes which affect digestion of insects
Example
DIMBOA in corn leaves affects European corn borer Ostrinia nubilalis
Gossypol in cotton affects H. armigera and S. litura
Tolerance
Ability of host plant to withstand insect population sufficient to damage susceptible
plants
- No adverse effect on insect infestation
- Tolerance by plant vigour, regrowth of damaged tissues, etc.
54 www.AgriMoon.CoM
Lecture 11: PEST - DEFINITION, CATEGORIES, CAUSES FOR

OUTBREAK, LOSSES CAUSED BY PESTS
PEST - Derived from French word ‘Peste’ and Latin term ‘Pestis’ meaning
plague or contagious disease
- Pest is any animal which is noxious, destructive or troublesome to man or his
interests
- A pest is any organism which occurs in large numbers and conflict with man’s
welfare, convenience and profit
- A pest is an organism which harms man or his property significantly or is likely to
do so (Woods, 1976)
- Insects are pests when they are sufficiently numerous to cause economic damage
(Debacli, 1964)
- Pests are organisms which impose burdens on human population by causing
(i) Injury to crop plants, forests and ornamentals
(ii) Annoyance, injury and death to humans and domesticated animals
(iii) Destruction or value depreciation of stored products.
- Pests include insects, nematodes, mites, snails, slugs, etc. and vertebrates like rats,
birds, etc.
Depending upon the importance, pests may be agricultural forest, household,
medical, aesthetic and veterinary pests.
CATEGORIES OF PESTS
Based on occurrence following are pest categories
Regular pest: Frequently occurs on crop - Close association e.g. Rice slem borer,
Brinjal fruit borer
Occasional pest: Infrequently occurs, no close association e.g. Caseworm on rice,
Mango stem borer
Seasonal pest: Occurs during a particular season every year e.g. Red hairy caterpillar
on groundnut, Mango hoppers
Persistent pests: Occurs on the crop throughout the year and is difficult to control
e.g. Chilli thrips, mealy bug on guava
Sporadic pests: Pest occurs in isolated localities during some period. e.g. Coconut
slug caterpillar
Based on level of infestation

Pest epidemic: Sudden outbreak of a pest in a severe form in a region at a particular
time e.g. BPH in Tanjore, RHC in Madurai, Pollachi
Endemic pest: Occurrence of the pest in a low level in few pockets, regularly and
confined to particular area e.g. Rice gall midge in Madurai, Mango hoppers in
Periyakulam
55 www.AgriMoon.CoM
Parameters of insect population levels

General equilibrium position (GEP)
The average density of a population over a long period of time, around which
the pest population over a long period of time, around which the pest population tends
to fluctuate due to biotic and abiotic factors and in the absence of permanent
environmental changes.
Economic threshold level (ETL)

Population density at which control measure should be implemented to
prevent an increasing pest population from reaching the ETL.
Economic injury level (EIL)

The lowest population density that will cause economic damage
Damage boundary (DB)

The lowest level of damage which can be measured. ETL is always less than
EIL. Provides sufficient time for control measures.
PEST CATEGORIES ACCORDING TO EIL, GEP AND DB
(i) Key pest

- Most severe and damaging pests
- GEP lies above EIL always
- Spray temporarily bring population below EIL
- These are persistent pests
- The environment must be changed to bring GEP
below EIL
e.g. Cotton bollworm, Diamond backmoth
(ii) Major pest
- GEP lies very close to EIL or coincides with
EIL
- Economic damage can be prevented by timely
and repeated sprays e.g. Cotton jassid, Rice
stem borer
(iii) Minor pest/Occasional pest
- GEP is below the EIL usually
- Rarely they cross EIL
- Can be controlled by spraying e.g. Cotton
stainers, Rice hispa, Ash weevils
56 www.AgriMoon.CoM
(iv) Sporadic pests

- GEP generally below EIL
- Sometimes it crosses EIL and cause severe loss
in some places/periods e.g. Sugarcane pyrilla,
White grub, Hairy caterpillar
(v) Potential pests
- They are not pests at present
- GEP always less than EIL
- If environment changed may cause economic
loss e.g. S. litura is potentia pest in North India
CAUSES OF PEST OUTBREAK
Activity of human beings which upsets the biotic balance of ecosystem is the
prime cause for pest outbreak. The following are some human interventions - Reason
fro outbreak
i. Deforestation an bringing under cultivation
- Pest feeding on forest trees are forced to feed on cropped
- Biomass/unit area more in forests than agricultural land
- Weather factors also altered - Affects insect development
ii. Destruction of natural enemies

- Due to excess use of insecticides, natural enemies are killed
- This affects the natural control mechanism and pest outbreak occurs, e.g.
Synthetic pyrethroid insecticides kill NE.
iii. Intensive and Extensive cultivation

Monoculture (Intensive) leads to multiplication of pests
Extensive cultivation of susceptible variety in large area - No competition for food
- multiplication increases
e.g. Stem borers in rice and sugarcane
iv. Introduction of new varieties and crops.

Varieties with favourable physiological and morphological factors cause
multiplication of insects. e.g.
Succulent, dwarf rice varieties favour leaf folder
Combodia cotton favours stem weevil and spotted bollworm
Hybrid sorghum (CSH 1), cumbu (HB1) favour shoot flies and gall midges
57 www.AgriMoon.CoM
v. Improved agronomic practices

Increased N fertilizer - High leaf folder incidence on rice
Closer planting - BPH and leaf folder increases
Granular insecticides - Possess phytotonic effect on rice
vi. Introduction of new pest in new environment

Pest multiplies due to absence of natural enemies in new area
Apple wooly aphid Eriosoma lanigerum multiplied fast due to absence of
Aphelinus mali (Parasit)
vii. Accidental introduction of pests from foreign countries (through air/sea

ports) e.g.
a. Diamondback moth on cauliflower (Plutella xylostella)
b. Potato tuber moth Phthorimaea operculella
c. Cottony cushion scale Icerya purchasi on wattle tree
d. Wooly aphid - Eriosoma lanigerum on apple
e. Psyllid - Heteropsylla cubana on subabul
f. Spiralling whitefly - Adeyrodichus dispersus on most of horticultural crops
viii. Large scale storage of food grains Serve

as reservoir for stored grain pests
Urbanisation - changes ecological balance
Rats found in underground drainage
Resurgence
Tremendous increase in pest population brought about by insecticides despite
good initial reduction in pest population at the time of treatment.
Deltamethrin, Quinalphos, Phorate - Resurgence of BPH in rice
Synthetic pyrethroids - Whitefly in cotton
Carbofuran - Leaf folder in rice
Losses caused by pests

Crop loss from all factors - 500 billion US $ annually world wide
Insect pests - 15.6% loss of production
Plant pathogens - 13.3%
Weeds - 13.2%
58 www.AgriMoon.CoM
Estimated crop loss in various crops in India
Crop Loss in yield %

1. Wheat 3.0
2. Rice 10.0
3. Maize 5.0
4. Sorghum 5.0
5. Cotton 18.0
6. Pulses, groundnut 5.0
7. Sugarcane 10.0
8. Coffee 8.0
9. Fruits 25.0
10. Coconut 5.0
Source: (Pradhan (1964)
Estimated annual crop loss in India by insect pests = Rs.29,240 crores

(Dhaliwal and Arora, 1996)
59 www.AgriMoon.CoM
Lecture 12: PEST MONITORING - PEST SURVEILLANCE AND

FORECASTING - OBJECTIVES, SURVEY, SAMPLING, TECHNIQUES AND
DECISION MAKING - ETL AND EIL. FACTORS INFLUENCING EIL AND
ETL.
Pest Monitoring
Monitoring phytophagous insects and their natural enemies is a fundamental tool
in IPM - for taking management decision
Monitoring - estimation of changes in insect distribution and abundance
- information about insects, life history
- influence of biotic and abiotic factors on pest population
Pest Surveillance
Refers to the constant watch on the population dynamics of pests, its incidence
and damage on each crop at fixed intervals to forewarn the farmers to take up
timely crop protection measures.
Three basic components of pest surveillance

Determination of
a. the level of incidence of the pest species
b. the loss caused by the incidence
c. the economic benefits, the control will provide
Pest Forecasting
Forecasting of pest incidence or outbreak based on information obtained from
pest surveillance.
Uses
- Predicting pest outbreak which needs control measure
- Suitable stage at which control measure gives maximum protection
Two types of pest forecasting

a. Short term forecasting - Based on 1 or 2 seasons
b. Long term forecasting - Based on affect of weather parameters on pest
Objectives of Pest Surveillance

to know existing and new pest species
to assess pest population and damage at different growth stage of crop
to study the influence of weather parameters on pest
to study changing pest status (Minor to major)
to assess natural enemies and their influence on pests
effect of new cropping pattern and varieties on pest
60 www.AgriMoon.CoM
Survey
Conducted to study the abundance of a pest species
Two types of survey - Roving survey and fixed plot survey

Roving survey
- Assessment of pest population/damage from randomly selected spots
representing larger area
- Large area surveyed in short period
- Provides information on pest level over large area
Fixed plot survey

Assessment of pest population/damage from a fixed plot selected in a field.
The data on pest population/damage recorded periodic from sowing till harvest. e.g.
1 sq.m. plots randomly selected from 5 spots in one acre of crop area in case of rice.
From each plot 10 plant selected at random. Total tillers and tillers affected by stem
borer in these 10 plants counted. Total leaves and number affected by leaf folder
observed. Damage expressed as per cent damaged tillers or leaves. Population of
BPH from all tillers in 10 plants observed and expressed as number/tiller.
Qualitative survey - Useful for detection of pest

Quantitative survey - Useful for enumeration of pest
Sampling Techniques
Absolute sampling - To count all the pests occurring in a plot
Relative sampling - To measure pest in terms of some values which can be compared
over time and space e.g. Light trap catch, Pheromone trap
Methods of sampling
a. In situ counts - Visual observation on number of insects on plant canopy
(either entire plot or randomly selected plot)
b. Knock down - Collecting insects from an area by removing from crop and
(Sudden trap) counting (Jarring)
c. Netting - Use of sweep net for hoppers, odonates, grasshopper
d. Norcotised collection - Quick moving insects anaesthesised and counter
e. Trapping - Light trap - Phototropic insects
Pheromone trap - Species specific
Sticky trap - Sucking insects
Bait trap - Sorghum shootfly - Fishmeal trap
Emergence trap - For soil insects
61 www.AgriMoon.CoM
f. Crop samples
Plant parts removed and pest counted e.g. Bollworms
Stage of Sampling
- Usually most injurious stage counted
- Sometimes egg masses counted - Practical considerations
- Hoppers - Nymphs and adult counted
Sample Size
- Differs with nature of pest and crop
- Parger sample size gives accurate results
Decision Making
- Population or damage assessed from the crop
- Compared with ETL and EIL
- When pest level crosses ETL, control measure has to be taken to prevent pest from
reducing EIL.
Economic Injury Level

- Defined as the lowest population density that will cause economic damage
(Stern et al., 1959)
- Also defined as a critical density where the loss caused by the pest equals the cost
of
control measure
EIL can be calculated using following formula
C C
EIL = (or)
VxIxDxK VIDK
where,
EIL = Economic injury level in insects/production (or) insects/ha
C = Cost of management activity per unit of production (Rs./ha)
V = Market value per unit of yield or product (Rs./tonne)
I = Crop injury per insect (Per cent defoliation/insect)
D = Damage or yield loss per unit of injury (Tonne loss/% defoliation)
K = Proportionate reduction in injury from pesticide use
Worked examples of EIL

Calculate EIL in terms of pest population/ha with following figures
C = Management cost per unit area = Rs.3,000/- per ha
V = Market value in Rs./unit product = Rs.1,000/tonne
62 www.AgriMoon.CoM
I = Crop injury/pest density = 1% defoliation/100 insects

D = Loss caused by unit injury = 0.05 tonne loss/1% defoliation
K = Proportionate reduction in
injury by pesticide application = 0.8 (80% control)
C 3000
EIL = =
VIDK 1000 x 0.01 x 0.05 x 0.8
63 www.AgriMoon.CoM
EIL = 7500 insects/ha
Economic threshold level (ETL) or Action threshold

- ETL is defined as the pest density at which control measures should be applied to
prevent an increasing pest population from reaching Economic Injury Level (EIL)
- ETL represents pest density lower than EIL to allow time for initiation of
control measure
Factors Influencing ETL and EIL

a. Market value of crop Primary factors
b. Management costs
c. Degree of injury per insect Secondary factors
d. Crop susceptibility to injury
a. Market value of crop

When crop value increases, EIL decreases and vice-versa
b. Management of injury per insect
When management costs increase, EIL also increases
c. Degree of injury per insect
- Insects damaging leaves or reproductive parts have different EIL (Lower EIL for
Rep. part damages)
- If insects are vectors of disease EIL is very low even 1 or 2 insects if found -
management to be taken
- If insects found on fruits - Marketability reduced - EIL very low e.
Crop susceptibility to injury
- If crop can tolerate the injury and give good yield. EIL can be fixed at a higher
value
- When crop is older, it can withstand high pest population - EIL can be high
Tertiary factors
Weather, soil factors, biotic factors and human social environment
These tertiary factors cause change in secondary factors thereby affect the ETL and
EIL.
64 www.AgriMoon.CoM
Lecture 13: PEST MANAGEMENT - DEFINITION - NEED - OBJECTIVES -

REQUIREMENTS FOR SUCCESSFUL PEST MANAGEMENT
PROGRAMME - COMPONENTS OF PEST MANAGEMENT
Pest Management (or) Integrated Pest Management –

Definition IPM definition by FAO (1967)
Integrated Pest Management (IPM) is a system that, in the context of
associated environment and population dynamics of the pest species, utilizes all
suitable techniques and methods in as compatible a manner as possible and maintains
pest populations at levels below those causing economic injury.
IPM definition by Luckmann and Metcalf (1994)

IPM is defined as the intelligent selection and use of pest control tactics that
will ensure favourable economical, ecological and sociological consequences.
Need for Pest Management (or) Why Pest Management
1. Development of resistance in insects against insecticides e.g. OP and synthetic

pyrethroid resistance in Helicoverpa armigera.
2. Out break of secondary pests e.g. Whiteflies emerged as major pest when
spraying insecticide against H. armigera.
3. Resurgence of target pests e.g. BPH of rice increased when some OP chemicals
are applied.
4. When number of application increases, profit decreases.
5. Environmental contamination and reduction in its quality.
6. Killing of non-target animals and natural enemies.
7. Human and animal health hazards.
Stages in crop protection leading to IPM
1. Subsistence phase : Only natural control, no insecticide use

2. Exploitation phase : Applying more pesticides, growing HY varieties and
get more yield and returns
3. Crisis phase : Due over use pesticides, problem of resurgence,
resistance, secondary pest out break, increase in
production cost
4. Disaster phase : Due to increased pesticide use - No profit, high residue
in soil - Collapse of control system
5. Integrated : IPM integrates ecofriendly methods to optimize
Management Phase control rather than maximise it.
65 www.AgriMoon.CoM
Objectives of pest management

1. To reduce pest status below economic injury level. Complete elimination of pest
is not the objective.
2. To manage insects by not only killing them but by preventing feeding,
multiplication and dispersal.
3. To use ecofriendly methods, which will maintain quality of environment (air,
water, wild life and plant life)
4. To make maximum use of natural mortality factors, apply control measures only
when needed.
5. To use component in sustainable crop production.
Requirements for successful pest management programme

1. Correct identification of insect pests
2. Life history and behaviour of the pest
3. Natural enemies and weather factors affecting pest population
4. Pest surveillance will provide above data
5. Pest forecasting and predicting pest outbreak
6. Finding out ETL for each pest in a crop
7. Need and timing of control measure - Decision
8. Selection of suitable methods of control
9. Analysis of cost/benefit and benefit/risk of each control measure
10. Farmer’s awareness and participation
11. Government support
12. Consumer awareness on use of pesticides free products
TOOLS OR COMPONENTS OF INTEGRATED PEST MANAGEMENT

(Arranged in increasing order of complexity)
i. Cultural method or use of agronomic practices

1. Crop rotation 5. Pruning or thinning
2. Crop refuse destruction 6. Fertilizer management
3. Tillage of soil 7. Water management
4. Variation in time of 8. Intercropping
planting or harvesting 9. Trap crop
ii. Host plant resistance - Antixenosis, antibiosis, tolerance
iii. Mechanical methods of pest control

1. Hand destruction
2. Exclusion by screens, barriers
3. Trapping, suction devices, collecting machine
4. Crushing and grinding
66 www.AgriMoon.CoM
iv. Physical methods

1. Heat
2. Cold
3. Energy - light trap, irradiation, light regulation
4. Sound
v. Biological methods
1. Protection and encouragement of NE
2. Introduction, artificial increase and colonizing specific parasitoids and
predators
3. Pathogens on insects like virus, bacteria, fungi and protozoa
4. Use of botanicals like neem, pongam, etc.
vi. Chemical methods

1. Attractants
2. Repellents
3. Insecticides - OC, OP, carbamates, pyrethroids, etc.
4. Insect growth inhibitors
5. Chemosterilants
vii.Behavioural methods
1. Pheromones
2. Allelochemics
viii. Genetic/biotechnology method

- Release of genetically incompatible/sterile pests
- Transgenic plant
ix. Regulatory/legal method

- Plant/animal quarantine
- Eradication and suppression programme
67 www.AgriMoon.CoM
Lecture 14: TRADITIONAL METHODS OF PEST CONTROL
CULTURAL CONTROL
Definition : Manipulation of cultural practices to the disadvantage of pests.
I. Farm level pratices
S.No. Cropping Techniques Pest Checked

1. Ploughing Red hairy caterpillar
2. Puddling Rice mealy bug
3. Trimming and plastering Rice grass hopper
4. Pest free seed material Potato tuber moth
5. High seed rate Sorghum shootfly
6. Rogue space planting Rice brown planthopper
7. Plant density Rice brown planthopper
8. Earthing up Sugarcane whitefly
9. Detrashing Sugarcane whitefly
10. Destruction of weed hosts Citrus fruit sucking moth
11. Destruction of alternate host Cotton whitefly
12. Flooding Rice armyworm
13. Trash mulching Sugarcane early shoot borer
14. Pruning / topping Rice stem borer
15. Intercropping Sorghum stem borer
16. Trap cropping Diamond back moth
17. Water management Brown planthopper
18. Judicious application of fertilizers Rice leaf folder
19. Timely harvesting Sweet potato weevil
II. Community level practices

1. Synchronized sowing : Dilution of pest infestation (eg) Rice, Cotton
2. Crop rotation : Breaks insect life cycle
3. Crop sanitation
a) Destruction of insect infested parts (eg.) Mealy bug in brinjal
b) Removal of fallen plant parts (eg.) Cotton squares
c) Crop residue destruction (eg.) Cotton stem weevil
68 www.AgriMoon.CoM
Advantages Disadvantages
1. No extra skill 1. No complete control
2. No costly inputs 2. Prophylactic nature
3. No special equipments 3. Timing decides success
4. Minimal cost
5. Good component in IPM
6. Ecologically sound
PHYSICAL CONTROL
Modification of physical factors in the environment to minimise (or) prevent
pest problems. Use of physical forces like temperature, moisture, etc. in managing the
insect pests.
A. Manipulation of temperature
1. Sun drying the seeds to kill the eggs of stored product pests.
2. Hot water treatment (50 - 55oC for 15 min) against rice white tip nematode.
3. Flame throwers against locusts.
4. Burning torch against hairy caterpillars.
5. Cold storage of fruits and vegetables to kill fruitflies (1 - 2oC for 12 - 20 days).
B. Manipulation of moisture
1. Alternate drying and wetting rice fields against BPH.
2. Drying seeds (below 10% moisture level) affects insect development.
3. Flooding the field for the control of cutworms.
C. Manipulation of light
1. Treating the grains for storage using IR light to kill all stages of insects (eg.)
Infra-red seed treatment unit (Fig.1).
2. Providing light in storage go downs as the lighting reduces the fertility of
Indian meal moth, Plodia.
3. Light trapping.
D. Manipulation of air
1. Increasing the CO2 concentration in controlled atmosphere of stored grains to
cause asphyxiation in stored product pests.
E. Use of irradiation
Gamma irradiation from Co60 is used to sterilize the insects in laboratory
which compete with the fertile males for mating when released in natural condition.
(eg.) cattle screw worm fly, Cochliomyia hominivorax control in Curacao Island by
E.F.Knipling.
69 www.AgriMoon.CoM
F. Use of greasing material

Treating the stored grains particularly pulses with vegetable oils to prevent the
oviposition and the egg hatching. eg., bruchid adults.
G. Use of visible radiation : Yellow colour preferred by aphids, cotton whitefly :

yellow sticky traps.
H. Use of Abrasive dusts

1. Red earth treatment to red gram : Injury to the insect wax layer.
2. Activated clay : Injury to the wax layer resulting in loss of moisture leading to
death. It is used against stored product pests.
3. Drie-Die : This is a porous finely divided silica gel used against storage
insects.
Preparation of activated clay :

Kaolinite clay
POWDERING
ACID ACTIVATION
In H2SO4 10 N
DIGESTION (Autoclave - 1 hr in 15 lb)
WASHING
DRYING
POWDERING AND SIEVING IN 100 MESH HEAT
ACTIVATION (Muffle furnace - 4hrs at 400oC)
ACTIVATED CLAY
MECHANICAL CONTROL
Use of mechanical devices or manual forces for destruction or exclusion of
pests.
70 www.AgriMoon.CoM
A. Mechanical destruction : Life stages are killed by manual (or) mechanical

force.
Manual Force
1. Hand picking the caterpillars
2. Beating : Swatting housefly and mosquito
3. Sieving and winnowing : Red flour beetle (sieving) rice weevil (winnowing)
4. Shaking the plants : Passing rope across rice field to dislodge caseworm and
shaking neem tree to dislodge June beetles
5. Hooking : Iron hook is used against adult rhinoceros beetle
6. Crushing : Bed bugs and lice
7. Combing : Delousing method for Head louse
8. Brushing : Woolen fabrics for clothes moth, carper beetle.
Mechanical force
1. Entoletter : Centrifugal force - breaks infested kernels - kill insect stages -
whole grains unaffected - storage pests.
2. Hopper dozer : Kill nymphs of locusts by hording into trenches and filled with
soil.
3. Tillage implements : Soil borne insects, red hairy caterpillar.
4. Mechnical traps : Rat traps of various shapes like box trap, back break trap,
wonder trap, Tanjore bow trap.
B. Mechanical exclusion
Mechanical barriers prevent access of pests to hosts.
1. Wrapping the fruits : Covering with polythene bag against pomegrante fruit
borer.
2. Banding : Banding with grease or polythene sheets - Mango mealybug.
3. Netting : Mosquitoes, vector control in green house.
4. Trenching : Trapping marching larvae of red hairy catepiller.
5. Sand barrier : Protecting stored grains with a layer of sand on the top.
6. Water barrier : Ant pans for ant control.
7. Tin barrier : Coconut trees protected with tin band to prevent rat damage.
8. Electric fencing : Low voltage electric fences against rats.
Advantage of mechanical control Disadvantages

1. Home labour utilization 1. Limited application
2. Low equipment cost 2. Rarely highly effective
3. Ecologically safe 3. Labour intensive
4. High technical skill not required in adopting.
Appliances in controlling the pests
71 www.AgriMoon.CoM
1. Light traps : Most adult insects are attracted towards light in night. This
principle is used to attract the insect and trapped in a mechanical device.
a) Incandescent light trap : They produce radiation by heating a tungsten
filament. The spectrum of lamp include a small amount of ultraviolet,
considerable visible especially rich in yellow and red. (eg.) Simple
incandescent light trap (Fig. 2), portable incandescent electric (Fig.3). Place a
pan of kerosenated water below the light source.
b) Mercury vapour lamp light trap : They produce primarily ultraviolet, blue and
green radiation with little red. (eg.) Robinson trap (Fig.4). This trap is the
basic model designed by Robinson in 1952. This is currently used towards a
wide range of Noctuids and other nocturnal flying insects. A mercury lamp
(125 W) is fixed at the top of a funnel shaped (or) trapezoid galvanized iron
cone terminating in a collection jar containing dichlorvos soaked in cotton as
insecticide to kill the insect.
c) Black light trap : Black light (Fig.5) is popular name for ultraviolet radiant
energy with the range of wavelengths from 320-380 nm. Some commercial
type like Pest-O-Flash, Keet-O-Flash are available in market. Flying insects
are usually attracted and when they come in contact with electric grids, they
become elctrocuted and killed.
2. Pheromone trap : Synthetic sex pheromones are placed in traps to attract

males. The rubberised septa, containing the pheromone lure are kept in traps
designed specially for this purpose and used in insect monitoring / mass
trapping programmes. Sticky trap (Fig.6), water pan trap (Fig.7) and funnel
type (Fig.8) models are available for use in pheromone based insect control
programmes.
3. Yellow sticky trap : Cotton whitefly, aphids, thrips prefer yellow colour.
Yellow colour is painted on tin boxes and sticky material like castor oil /
vaseline is smeared on the surface (Fig.9). These insects are attracted to
yellow colour and trapped on the sticky material.
4. Bait trap : Attractants placed in traps are used to attract the insect and kill
them. (eg.) Fishmeal trap: This trap is used against sorghum shootfly.
Moistened fish meal is kept in polythene bag or plastic container inside the tin
along with cotton soaked with insecticide (DDVP) to kill the attracted flies
(Fig.10&11).
5. Pitfall trap helps to trap insects moving about on the soil surface, such as
ground beetles, collembola, spiders. These can be made by sinking glass jars
72 www.AgriMoon.CoM
(or) metal cans into the soil. It consists of a plastic funnel, opening into a
plastic beaker containing kerosene supported inside a plastic jar (Fig. 12).
6. Probe trap : Probe trap is used by keeping them under grain surface to trap
stored product insect (Fig.13).
7. Emergence trap : The adults of many insects which pupate in the soil can be
trapped by using suitable covers over the ground. A wooden frame covered
with wire mesh covering and shaped like a house roof is placed on soil
surface. Emerging insects are collected in a plastic beaker fixed at the top of
the frame (Fig.14).
8. Indicator device for pulse beetle detection : A new cup shaped indicator device has
been recently designed to predict timely occurrence of pulse beetle Callosobruchus
spp. This will help the farmers to know the correct time of emergence of pulse beetle.
This will help them in timely sun drying which can bill all the eggs.
73 www.AgriMoon.CoM
TAMIL NADU AGRICULTURAL UNIVERSITY

CENTRE FOR PLANT PROTECTION STUDIES
DEPARTMENT OF AGRICULTURAL ENTOMOLOGY
MID-SEMESTER EXAMINATION – MODEL QUESTION PAPER
AEN 201. Principles of Applied Entomology (2+1)
Date : 14-6-2002
Time : 1hr.
Marks : 20
PART- A
74 www.AgriMoon.CoM
Match the following (any eight) 8 x 0.5 = 4
A1. Drones - Pollination by honeybees

A2. Sun drying of foodgrains - Transmits bubonic plague
A3. Sudden outbreak of pest - Inactivity of insects in winter
A4. Gause's principle - Emerge from unfertilized eggs
A5. Myiasis - Communication in bees
A6. Newspaper method - Pest epidemic
A7. Mellitophily - Competitive exclusion
A8. Rat flea - Infestation of tissues by maggots
A9. Karl von Frisch - Kills stored product insects
A10. Hibernation - Uniting bee colonies
PART - B
Answer any six 6x1=6
B1. Wagtail dance B5. ETL and EIL

B2. Supercedure B6. Roving survey and fixed plot
survey
B3. Management of mosquitoes B7. Delousing cattle and birds
B4. Key pest and potential pest B8. Ripening of honey
PART - C
Answer any five 5 x 2 = 10
C1. Draw a flow chart to show economic classification of insects

C2. List 5 major differences between rock bee (Apis dorsata) and Indian bee (Apis
cerana indica)
C3. Discuss the ways to reduce pesticidal poisoning to bees.
C4. Write in brief the causes for pest outbreak
C5. Discuss pollination in fig by fig wasp
C6. Define IPM. Give a diagrammatic representation of various components of IPM
C7. Define cultural method of pest control. Mention any eight farm level cultural
practices with examples
WISH YOU ALL THE BEST
75 www.AgriMoon.CoM
Lecture 15 LEGAL CONTROL METHODS - DEFINITION - PEST

INTRODUCTIONS - QUARANTINE - PHYTOSANITARY CERTIFICATE
PEST LEGISLATION LEGAL CONTROL/LEGISLATIVE
CONTROL/REGULATORY CONTROL
Definition: Preventing the entry and establishment of foreign plant and animal pest in
a country or area and eradication or suppression of the pests established in a limited
area through compulsory legislation or enactment
Pests Accidentally Introduced Into India

1. Pink bollworm - Pectinophora gossypiella
2. Cotton cushion scale - Icerya purchasi
3. Wooly aphid of apple - Aphelinus mali
4. SanJose scale - Quadraspidiotus perniciosus
5. Potato tuber moth - Gnorimoschima operculella
6. Cyst (Golden) nematode of potato - Globodera sp.
7. Giant african snail - Acatina fullica
8. Subabul psyllid - Heteropsylla cubana
9. Bunchytop disease of banana
10. Spinalling whitefly - Aleyrodicus dispersus
Foreign Pests From Which India Is Free

Mediterranean fruitfly - Ceratitis capitata
Grapeavine phylloxera
Cotton boll weevil - Anthonomos grandis
Codling moth of apple - Lasperysia pomonella
Quarantine
Isolation to prevent spreading of infection
Plant Quarantine
Legal restriction of movement of plant materials between countries and between
states within the country to prevent or limit introduction and spread of pests and
diseases in areas where they do not exist.
PEST LEGISLATIONS
1905 - ‘Federal Insect Pest Act’ - first Quarantine act against SanJose scale
1912 - ‘US Plant Quarantine Act’
1914 - ‘Destructive Insects and Pests Act’ of India (DIPA)
1919 - ‘Madras Agricultural Pests and Diseases Act’
1968 - ‘The Insecticides Act’
76 www.AgriMoon.CoM
DIFFERENT CLASSES OF QUARANTINE

Foreign Quarantine (Legislation to prevent the introduction of new pests,
diseases and weeds from foreign countries)
Plant quarantine inspection and treatments at sea ports of Mumbai, Kolkata, Cochin,
Chennai and Visakapattinam and airports of Amritsar, Mumbai, Kolkata, Chennai
and New Delhi
Import by post parcel prohibited except by scientists
Import of plant materials prohibited or restricted
Import permits required for importation of plant material
Phytosanitary certificate from the country of origin is required
Phytosanitary certificate is issued by State Entomologist and Pathologists to the

effect that the plant or seed material is free from any pest or disease
a. Fumigation of imported plant material based on need
b. Taking care of pests of quarantine concern in India
Restriction imposed on the importation of

i. Sugarcane setts - to prevent West Indies sugar weevil
ii. Coffee seeds - to prevent coffee berry borer
iii.Cotton seeds - to prevent cotton boll weevil
a. Export of pepper, cardamom and tamarind restricted
b. In 1946, Directorate of Plant Protection, Quarantine and Storage, Government of
India established - for inspection of export and import of agricultural
commodities.
2. Domestic quarantine (within different parts of country)
- Flutted scale Icerya puchasi noticed in Nilgiris and Kodaikanal in 1943 in Wattle
trees. Quarantine stations at Mettupalayam and Gudalur for Nilgiris and
Shenbaganur for Kodaikanal to prevent spread of flutted scale in TN.
- Preventing movement of Banana from Palani hills to prevent Bunchy top spread
3. Legislation to take up effective measures to prevent spread of established
pests Example: Cotton stem weevil, Groundnut RHC, Coffee stem borer, Coconut
black headed caterpillar (BHC), Sugarcane top borer.
i. Stem weevil of cotton (Combodia cotton, 1913)

Previous crop to be removed before Aug.1
Next crop to be sown not before Sep. 1 to keep land free of cotton for sometime
ii. RHC of groundnut (1930)

- Collection of pupae in summer ploughing
- Putting light traps and bonfires
- Hand picking of egg and larvae
- Spread leaves in field, trench, collect and destroy
77 www.AgriMoon.CoM
iii. Stem borer of coffee (1946)

This act is still in force in Salem, Coimbatore, Madurai and Nilgiris
- All infested plants to be removed and destroyed by 15th December every year
- Swabbing with wettable powder (Carbaryl) on stem and branch
Legislation to prevent the adulteration and misbranding of insecticides and to
determine the permissible residues in food stuff.
Legislation to regulate the activities of men engaged in pest control
THE INSECTICIDES ACT, 1968

- Implemented in 1971 (Insecticides Rule, 1971)
- Safety oriented legislation
- Regulates import, manufacture, storage, transport, sale, distribution and use of
insecticides with a view to prevent risk to human beings and animals
- Regulatory provision - compulsory registration, licensing, inspection, drawal and
analysis of samples, detention, seizure and confiscation of stocks, suspension and
cancellation of licences, etc.
- Enforcement of the act is joint responsibility of central and state governments.
- Statutory bodies
- (i) Central Insecticides Board (CIB) (28 members)
Chairman (CIB) - Director General of Health Services
(ii) Registration Committee (RC) (5 members)
Chairman (RC) - Deputy Director General, Crop Sciences, ICAR
Salient features of the insecticides act (1968)

- Compulsory registration with CIB (Central level)
- Licence for manufacture, formulation and sale at state level
- Inter departmental/Ministerial/Organisational co-ordination achieved by high level
Advisory Board “Central Insecticides Board” with 28 members form various
fields
- RC to lookafter registration aspects of insecticides
- Enforcement by Insecticide inspectors at state/central level
- Power to prohibit the import, manufacture and sale of insecticides and also
confiscate stocks. Guilty are punishable.
Role of Plant Quarantine in the Export of Agricultural Commodities
International Plant Protection Convention (1951) of FAO, UN.

Article V of the convention makes it mandatory for member countries to issue
Phytosanitory certificate (PSC)
PSC should be conformity with Plant Quarantine Regulations of importing country.
Agricultural commodities during export should be accompanied by PSC.
78 www.AgriMoon.CoM
General requirement of PSC

- Inspected agrl. commodities should be free from pest/diseases
- Takes time for inspection - seek prior guidance from plant quarantine authorities in
India
Special requirements of PSC

- Additional declarations required from importing country for freedom of
commodities from specific pests/diseases
- Obtain complete details of requirements of importing country
Technical limitations
- Rules not relaxable. No compromise with principles of Plant Quarantine.
Procedure for getting PSC

- Application to be submitted to Plant Quarantine and Fumigation station
- Will be scrutinised, samples drawn and examined for pest, diseases, weeds
- If free PSC issued
- If found infested - rejected, PSC not issued
- Sometimes treatment (fumigation) given and PSC issued
Authority to issue PSC

Union Govt. of Agrl. has authorised officers in Central and State Govt. and UT
PPA to Govt. of India - Heads of Unit
Airports Seaports Land frontiers

Amristar Bombay Amristar Rail
Bombay Tuticorin Attari Rail
Calcutta Bhavnagar Attari Road
Hyderabad Calcutta Bongaon
Chennai Cochin Gede
New Delhi Chennai Kalimpong
Patna Nagapattinam Panitanki
Varanasi Rameswaram
Tiruchirapalli Visakhapatnam
Trivandrum
79 www.AgriMoon.CoM
Lecture 16 : HOST PLANT RESISTANCE - DEFINITION - TYPES AND

MECHANISMS ECOLOGICAL AND GENETIC RESISTANCE
Host Plant Resistance (HPR)

Definition
“Those characters that enable a plant to avoid, tolerate or recover from attacks of
insects under conditions that would cause greater injury to other plants of the same
species” (Painter, R.H., 1951).
“Those heritable characteristics possessed by the plant which influence the ultimate
degree of damage done by the insect” (Maxwell, F.G., 1972).
Types of Resistance
Ecological Resistance or Pseudo resistance
Apparent resistance resulting from transitory characters in potentially susceptible host
plants due to environmental conditions.
Pseudoresistance may be classified into 3 categories
a. Host evasion
Host may pass through the most susceptible stage quickly or at a time when insects
are less or evade injury by early maturing. This pertains to the whole population of
host plant.
b. Induced Resistance
Increase in resistance temporarily as a result of some changed conditions of plants or
environment such as change in the amount of water or nutrient status of soil
c. Escape
Absence of infestation or injury to host plant due to transitory process like incomplete
infestation. This pertains to few individuals of host.
Genetic Resistance
A. Based on number of genes
- Monogenic resistance: Controlled by single gene
Easy to incorporate into plants by breeding
Easy to break also
- Oligogenic resistance: Controlled by few genes
- Polygenic resistance: Controlled by many genes
- Major gene resistance: Controlled by one or few major genes (vertical resistance)
- Minor gene resistance: Controlled by many minor genes. The cumulative effect
of minor genes is called adult resistance or mature resistance or field resistance.
Also called horizontal resistance
B. Based on biotype reaction
- Vertical resistance: Effective against specific biotypes (specific resistance)
- Horizontal resistance: Effective against all the known biotypes
(Non specific resistance)
80 www.AgriMoon.CoM
C. Based on population/Line concept

- Pureline resistance: Exhibited by liens which are phenotypically and genetically
similar
- Multiline resistance: Exhibited by lines which are phenotypically similar but
genotypically dissimilar
D. Miscellaneous categories
- Cross resistance: Variety with resistance incorporated against a primary pest,
confers resistance to another insect.
- Multiple resistance: Resistance incorporated in a variety against different
environmental stresses like insects, diseases, nematodes, heat, drought, cold, etc.
E. Based on evolutionary concept
- Sympatric resistance: Acquired by coevolution of plant and insect (gene for gene)
Governed by major genes
- Allopatric resistance: Not by co-evolution of plant and insect.
Governed by many genes
Mechanisms of Resistance
The three important mechanisms of resistance are
- Antixenosis (Non preference)
- Antibiosis
- Tolerance
Antixenosis: Host plant characters responsible for non-preference of the insects for
shelter, oviposition, feeding, etc. It denotes presence of morphological or
chemcial factor which alter insect behaviour resulting in poor establishment of the
insect. e.g.
Trichomes in cotton - resistant to whitefly
Wax bloom on carucifer leaves - deter feeding by DBM
Plant shape and colour also play a role in non preference
Open panicle of sorghum - Supports less Helicoverpa
Antibiosis
Adverse effect of the host plant on the biology (survival, development and
reproduction) of the insects and their progeny due to the biochemical and biophysical
factors present in it.
Manifested by larval death, abnormal larval growth, etc.
Antibiosis may be due to
- Presence of toxic substances
- Absence of sufficient amount of essential nutrients
- Nutrient imbalance/improper utilization of nutrients
81 www.AgriMoon.CoM
Chemical factors in Antibiosis - Examples
Chemicals present in plants Imparts resistance against

1. DIMBOA (Dihydroxy methyl Against European corn borer, Ostrinia nubilalis
benzoxazin)
2. Gossypol (Polyphenol) Helicoverpa armigera (American bollworm)
3. Sinigrin Aphids, Myzus persicae
4. Cucurbitacin Cucurbit fruit flies
5. Salicylic acid Rice stem borer
Physical factors in antibiosis

Thick cuticle, glandular hairs, silica deposits, tight leaf sheath, etc.
c. Tolerance
Ability to grow and yield despite pest attack. It is generally attributable to plant
vigour, regrowth of damaged tissue, to produce additional branches, compensation by
growth of neighbouring plants.
Use of tolerance in IPM

- Tolerant varieties have high ETL - require less insecticide
- Apply less selection pressure on pests. Biotype development is less
HPR in IPM
- HPR is a very important component of IPM
- Selection and growing of a resistant variety minimise cost on all other pest
management activities
Compatibility of HPR in IPM
a. Compatability with chemical control
- HPR enhances efficacy of insecticides
- Higher mortality of leaf hoppers and plant hoppers in resistant variety compared
to susceptible variety
- Lower concentration of insecticide is sufficient to control insects on resistant
variety
b. Compatibility with biological control
- Resistant varieties reduce pest numbers - thus shifting pest: Predatory (or
parasitoid) ratio favourable for biological control. e.g. Predatory activity of mirid
bug Cyrtorhinus lividipennis on BPH was more on a resistant rice variety IR 36
than susceptible variety IR 8
- Insects feeding on resistant varieties are more susceptible to virus disease (NPV)
c. Compatibility with cultural method
- Cultural practices can help in better utilization of resistant varieties. e.g. Use of
short duration, pest resistant plants effective against cotton boll weevil in USA.
82 www.AgriMoon.CoM
Examples of resistant varieties in major crops
Pest Resistant varieties

Rice Yellow stem borer TKN 6, Paiyur 1
Brown planthopper (BPH) CO 42, IR 36, IR 64
Green leaf hopper (GLH) IR 50, Ptb 2, CO 46
Sugarcane Early shoot borer (ESB) CO 312, CO 421, CO 661,
Internode borer CO 975, CO 7304
Top shoot borer CO 745, CO 6515
Cotton American bollworm Abhadita
Spotted bollworm Deltapine
Stem weevil MCU 3, Supriya
Leaf hopper MCU 5, K 7, K 8
Sorghum Earhead bug K tall
Jasmine Eriophyid mite Pari Mullai
Advantages of HPR as a component in IPM

Specificity: Specific to the target pest. Natural enemies unaffected
Cumulative effect: Lasts for many successive generations
Eco-friendly: No pollution. No effect on man and animals
Easily adoptable: High yielding insect resistant variety easily accepted and adopted by
farmers. Less cost.
Effectiveness: Res. variety increases efficacy of insecticides and natural enemies
Compatability: HPR can be combined with all other components of IPM
Decreased pesticide application: Resistant varieties requires less frequent and low
doses of insecticides
Persistence: Some varieties have durable resistance for long periods
Unique situations: HPR effective where other control measures are less effective
e.g. a. When timing of application is critical
b. Crop of low economic value
c. Pest is continuously present and is a single limiting factor
Disadvantages of HPR
Time consuming: Requires from 3-10 years by traditional breeding programmes to
develop a res. variety.
Biotype development: A biotype is a new population capable of damaging and
surviving on plants previously resistant to other population of same species.
Genetic limiation: Absence of resistance genes among available germination
83 www.AgriMoon.CoM
Lecture 17: BIOLOGICAL CONTROL - DEFINITION - HISTORY AND

DEVELOPMENT - CLASSICAL EXAMPLES - FACTORS GOVERNING
BIOLOGICAL CONTROL
Biological control
Definition
The study and utilization of parasitoids, predators and pathogens for the
regulation of pest population densities.
Biological control can also be defined as the utilization of natural enemies to
reduce the damage caused by noxious organisms to tolerable levels.
Biological control is often shortened to biocontrol.
History and development of biological control and classical examples of biological

control
Antient times - In China Pharoah’s ant Monomorium pharaonis was used to control
stored grain pest. Red ant Oecophylla spp. used to control foliage
feeding caterpillar.
Year 1762 - ‘Mynah’ bird imported from India to Mauritius to control locust.
1770 - Bamboo runways between citrus trees for ants to control
caterpillars.
1888 - First well planned and successful biological control attempt

made
- During 1888 citrus industry in California (USA) seriously threatened by cottony

cushion scale, Icerya purdian
- Chemical treatments not known at that time
- Mr. C.V. Riley, a prominent entomologist suggested that the scale inset originated
from Australia and natural enemy for the scale from Australia should be
introduced into USA
- Mr. Albert Koebele was sent to Australia
- He found a beetle called Vedalia (Rodolia cardinalis) attacking and feeding on
seeds
- Vedalia beetle (Rodolia cardinalis) was imported in November 1888 into USA
and allowed on scale infested trees
- Within a year spectacular control of scale insect achieved
- Even till date this beetle controls the scale insect
- After this successful attempt of biological control many such introduction of
natural enemies were tried.
84 www.AgriMoon.CoM
1898 - First introduction of natural enemy into India
1898 - A coccinellid beetle, Cryptolaemus montrouzieri was imported into India

from Australia and released against coffee green scale, Cocus viridis.
Even today it is effective against mealybugs in South India.
1920 - A parasitoid Aphelinus mali introduced from England into India to control
Woolly aphid on Apple, Eriosoma lanigerum.
1929-31 - Fodolia cardinalis imported into India (from USA) to control cottony
cushion scale Icerya purchasi on Wattle trees.
1958-60 - Parasitoid Prospatella perniciosus imported from China
1960 - Parasitoid Aphytis diaspidis imported from USA
Both parasitoids used to control Apple Sanjose scale Quadraspidiotus
perniciosus
1964 - Egg parasitoid Telenomus sp. imported from New Guinea to control Castor
semilooper Achaea janata
1965 - Predator Platymeris laevicollis introduced from Zanzibar to control coconut
Rhinoceros beetle, Oryctes rhinoceros
History, development, classical examples of biocontrol

Till 1988
At global level 384 importations made against 416 species of insect pests. Out of
them
164 species (39.4%) - Completely controlled
75 species - Substantially controlled
15 species - Partially controlled
- Regional Station of Commonwealth Institute of Biological Control (CIBC)
established at Bangalore in 1957
- Presently Project Directorate of Biological Control (PDBC) Bangalore looks after
Biocontrol in India.
Factors affecting biological control

1. Tolerance limit of crop to insect injury - Successful in crops with high tolerance
limit
2. Crop value - Successful in crops with high economic value
3. Crop duration - Long duration crops highly suitable
4. Indigenous or Exotic pest - Imported NE more effective against introduced pest
5. If alternate host available for NE, control of target pest is less
6. If unfavourable season occurs, reintroduction of NE required
7. Presence of hyperparasites reduces effectiveness of biocontrol
85 www.AgriMoon.CoM
8. Tritrophic interaction of Plant-Pest-Natural enemy affects success of biocontrol,

e.g. Helicoverpa parasitization by Trichogramma more in timato than corn
9. Use of pesticides affect natural enemies
10. Selective insecticides (less toxic to NE required)
11. Identical situation for successful control does not occur
Qualities of an effective natural enemy

1. Adaptable to the environmental condition
2. Host specific (or narrow host range)
3. Multiply faster than the host (with high fecundity)
4. Short life cycle and high female : male ratio
5. High host searching capacity
6. Amenable for easy culturing in laboratory
7. Dispersal capacity
8. Free from hyper parasites
9. Synchronise life cycle with host
Three major techniques of biological control

1. Conservation and encouragement of indigenous NE
Defined as actions that preserve and increase NE by environmental
manipulation. e.g. Use of selective insecticides, provide alternate host and refugia for
NE.
2. Importation or Introduction
Importing or introducing NE into a new locality (mainly to control introduced
pests).
3. Augmentation
Propagation (mass culturing) and release of NE to increase its population.
Two types,
(i) Inoculative release: Control expected from the progeny and subsequent
generations only.
(ii) Inundative release: NE mass cultured and released to suppress pest directly
e.g. Trichogramma sp. egg parasitoid, Chrysoperla carnia predator
ROLE OF PARASITOIDS AND PREDATORS IN IPM

- Parasitoids and predators may be used in Agriculture and IPM in three ways.
They are
i) Conservation
ii) Introduction
iii) Augmentation - (a) Inoculative release, (b) Inundative release
86 www.AgriMoon.CoM
- Since biological control is safe to environment, it should be adopted as an

important component of IPM.
- Biological control method can be integrated well with other methods namely
cultural, chemical methods and host plant resistance (except use of broad
spectrum insecticides)
- Biological control is self propagating and self perpetuating
- Pest resistance to NE is not known
- No harmful effects on humans, livestock and other organisms
- Biological control is virtually permanent
- Biological agents search and kills the target pest
MICROBIAL CONTROL
- It is a branch of biological control
- Defined as control of pests by use of microorganisms like viruses, bacteria,
protozoa, fungi, rickettsia and nematodes.
I. VIRUSES
Viruses coming under family Baculoviridae cause disease in lepidoptera
larvae. Two types of viruses are common.
NPV (Nucleopolyhedro virus) e.g. HaNPV, SlNPV
GV (Granulovirus) e.g. CiGV
Symptoms
Lepidopteran larva become sluggish, pinkish in colour, lose appetite, body
becomes fragile and rupture to release polyhedra (virus occlusion bodies). Dead larva
hang from top of plant with prolegs attached (Tree top disease or “Wipfelkrankeit”)
II. BACTERIA
Spore forming (Facultative - Crystalliferous)
2 types of bacteria Spore forming (Obligate)
Non spore forming
i. Spore forming (Facultative, Crystelliferous)

The produce spores and also toxin (endotoxin). The endotoxin paralyses gut
when ingested e.g. Bacillus thuringiensis effective against lepidopteran. Commercial
products - Delfin, Dipel, Thuricide
ii. Spore-forming (Obligate)
e.g. Bacillus popilliae attacking beetles, produce ‘milky disease’
Commercial product - ‘Doom’ against ‘white grubs’
iii. Non-spore forming
e.g. Serratia entomophila on grubs
III. FUNGI
i. Green muscardine fungus - Metarhizium anisopliae attack coconut rhinoceros
beetle
87 www.AgriMoon.CoM
ii. White muscardine fungus - Beaveria bassiana against lepidopteran larvae iii.
White halo fungus - Verticillium lecanii on coffee green scale.
Other Microbs: Protoza, Nematodes
Limitations of biocontrol technique

- Complete control not achieved - Slow process
- Subsequent pesticide use restricted
- Expensive to culture many NE
- Requires trained man power
88 www.AgriMoon.CoM
Lecture 18 CHEMICAL CONTROL - DEFINITION - HISTORY AND

DEVELOPMENT - TOXICITY PARAMETERS - IDEAL QUALITIES OF AN
INSECTICIDE
Chemical Control: Management of insect pests using chemical pesticides is termed

as chemical control.
Pesticides: Chemicals which are used to kill pests
History of insecticide development
Year Chemicals
900 - Arsenites in China (Inorganic compound)
1690 - Tobacco used in Europe (Plant/natural product)
1787 - Soaps used in Europe
1867 - Paris Green in US
1874 - DDT synthezized by Zeidler
1883 - Bordeau in France
1925 - Dinitro compounds (First synthetic organic insecticide)
1932 - Thiocyanates
1939 - DDT insecticidal property discovered by Paul Muller of Switzerland.
Paul Muller awarded Nobel Prize in 1948 for discovering insecticidal
property of DDT
1941 - BHC in France and UK (in 1942) (BHC is presently called as HCH)
1944 - Parathion (Organo phosphate) discovered by Gerhard Schrader in
Germany
1945 - Chlordane (Cyclodian compound) in Germany
1947 - Carbamate insecticides in Switzerland
1962 - Rachel Carson’s Silent Spring appears (US) (This is not a chemical. The
book ‘ Silent Spring’ created awareness about ill effects of pesticides)
1967 - First JH mimic (Juvenile Hormone mimic) used in US (Insect growth
regulator)
1970 - Development of synthetic pyrethroids (UK) (Fast degradation) (Effective
at very low doses)
1980 - Discovery of avermectins (derived from bacteria). Effective at low dose.
Fast degradation.
1990 - Discovery of newer groups like (1) Neonicotinoids (Imidacloprid),
similar to natural nicotin, (2) Spinosyns (e.g. Spinosad) derived from
actinomycet
TOXICITY PARAMETERS
Toxicity of a given chemical to an organism can be measured using various
parameters as listed below.
89 www.AgriMoon.CoM
1) LD50 or Median lethal dose

LD50 is defined as the amount of insecticide per unit weight which will kill
505 of the particular organism or insect. LD50 usually expressed as mg/kg body
weight or g/larva or adult insect.
2) LC50 or Median lethal concentration

Defined as the concentration of insecticide required to kill 50% of the given
organism or insect. This is used when the exact dose per insect is not known, but the
concentration is known.
LC50 is expressed in PPM (1/1,000,000) or Percentage (1/100)
3) LT50 (Median lethal time)

LT50 is defined as the time required to kill 50% of the population at a certain
dose or concentration.
LT50 expressed in hours or minutes. LT50 is used in field studies and also for
testing insect viruses (NPV).
4. KD50: Median knockdown dose Dose of insecticide or time required to

5. KT50: Median knockdown time knockdown 50% of the insects
KD50 and KT50 are used for evaluating synthetic pyrethroids against insects.
6. ED50: Median effectivedose These terms are used to express the

7. EC50: Median effective concentration effectiveness of insect growth
regulators (IGR)
ED50 and EC50 are defined as the dose or concentration of the chemical (IGR)
required to affect 50% of population and produce desired symptoms in them.
Toxicity terms used to express the effect on mammals
1. Acute toxicity : Toxic effect produced by a single dose of a toxicant

2. Chronic toxicity : Toxic effects produced by the accumulation of small
amounts of the toxicant over a long period of time
3. Oral toxicity : Toxic effect produced by consumption of pesticide orally
4. Dermal toxicity : Toxic effect produced when insecticide enters through
skin
5. Inhalation toxicity : Toxic effect produced when poisonous fumes of
insecticide are inhaled (fumigants)
90 www.AgriMoon.CoM
Other terms : Acute oral, Acute dermal, Acute inhalation toxicity, etc.
Ideal Qualities of an Insecticide

An ideal insecticide should posses the following qualities
Kill the target insect effectively and quickly
Be less toxic to natural enemies
Be less toxic to honey bees, soil microorganisms
Be less toxic to fishes and mammals
Less hazardous and less toxic during handling or accidental consumption by human
beings
Quickly degradable in environment and should be less persistent (Residues should be
very less)
Should not cause resurgence of the target insect (i.e. Increase in population of target
insect) e.g. Chlorpyriphos causes resurgence of BPH on rice.
Should not cause outbreak of secondary pest on a minor pest by killing the natural
enemies
Should have a complex mode of action against which resistance development will
take more time. e.g. Azadirachtin from neem tree has complex action
Should have a longer storage life or shelf life
It is advantageous to select an insecticide which can kill a relatively broad spectrum of
target pests
It should be cost effective (High benefit/Cost ratio) and safe to use (High benefit/Risk
ratio)
Various generations of insecticides
Generation Year Compounds

1. First generation insecticide 1939-1942 BHC and DDT
2. Second generation insecticide 1944-1947 Organophosphates and Carbamate
3. Third generation insecticide 1967 Hormonal insecticides, JH mimic
insect growth regulators
4. Fourth generation insecticide 1970s Synthetic pyrethroids
91 www.AgriMoon.CoM
Lecture 19 PESTICIDES GROUPS
Groups of pesticides : The pesticides are generally classified into various groups
based on pest organism against which the compounds are used, their chemical nature,
mode of entry and mode of action.
1. Based on organisms
a) Insecticides : Chemicals used to kill or control insects (eg.) endosulfan,
malathion
b) Rodenticides : Chemicals exclusively used to control rats (eg.) Zinc

phosphide
c) Acaricides : Chemicals used to control mites on crops / animals (eg.)

Dicofol
d) Avicides : Chemicals used to repel the birds (eg.) Anthraquionone

e) Molluscicides : Chemicals used to kill the snails and slugs (eg.) Metaldehyde
f) Nematicides : Chemicals used to control nematodes (eg.) Ethylene
dibromide
g) Fungicides : Chemicals used to control plant diseases caused by fungi
(eg.) Copper oxy cholirde
h) Bactericide : Chemicals used to control the plant diseases caused by
bacteria (eg.) Streptomycin sulphate
i) Herbicide : Chemicals used to control weeds (eg.) 2,4, - D
2. Based on mode of entry

a) Stomach poison : The insecticide applied in the leaves and other parts of the
plant when ingested, act in the digestive system of the insect and bring about
kill (eg.) Malathion.
b) Contact Poison : The toxicant which brings about death of the pest species by
means of contact (eg.) Fenvalerate.
c) Fumigant : Toxicant enter in vapour form into the tracheal system (respiratory
poison) through spiracles (eg.) Aluminium phosphide
d) Systemic poison : Chemicals when applied to plant or soil are absorbed by
foliage (or) roots and translocated through vascular system and cause death of
insect feeding on plant. (eg.) Dimethoate.
3. Based on mode of action

a) Physical poison : Toxicant which brings about kill of one insect by exerting a
physical effect (eg.) Activated clay.
92 www.AgriMoon.CoM
b) Protoplasmic poison : Toxicant responsible for precipitation of protein (eg.)

Arsenicals.
c) Respiratory poison : Chemicals which inactivate respiratory enzymes (eg.)
hydrogen cyanide.
d) Nerve poison : Chemicals inhibit impulse conduction (eg.) Malathion.
e) Chitin inhibition : Chemicals inhibit chitin synthesis (eg.) Diflubenzuron.
4. Based on chemical nature
Classification based on chemical nature of insecticides
Pesticides
I. Inorganic II. Organic

pesticides pesticides
a.Petroleum b. Animal c. Plant d. Synthetic

oils origin origin organic
compiunds
1.Organo 2 Cyclodiene 3 Organo 4 Carba- 5 Synthetic 6 Miscell-

chlorine . compounds . phos- . mates . pyrethroids . aneous
phates groups
I.Inorganic pesticides
Inorganic chemicals used as insecticides
Eg. Arsenic, Fluorine, Sulphur, lime sulphur (Insecticides) zinc phosphide
(Rodenticide)
II.Organic pesticides
Organic compounds (constituted by C, H, O and N mainly)
Hydrocarbon oil (or) Petroleum oil – eg. Coal tar oil, kerosine etc.,
Animal origin insecticides – eg. Nereistoxin extracted from marine annelids –
commercially available as cartap, padan.
Plant origin insecticides : Nicotine from tobacco plants, pyrethrum from
Chrysanthemum flowers, Rotenoids from roots of Derris and Lonchocarpus
Neem – azadirachtin, Pongamia glabra, Garlic etc.,
Synthetic organic compounds : These organic chemicals are synthetically produced in
laboratory.
i. Chlorinated hydrocarbon (or) organochlorines

Eg. DDT, HCH, Endosulfan, Lindane, Dicofol (DDT, HCH banned)
ii. Cyclodienes
Eg. Chlordane, Heptachlor (Banned chemicals)
iii Organophosphates : (Esters of phosphoric acid)
93 www.AgriMoon.CoM
.
Eg. Dichlorvos, Monocrotophos, Phospamidon, Methyl parathion, Fenthion,
Dimethoate, Malathion, Acephate, Chlorpyriphos
iv. Carbamates: (Derivatives of carbamic acid)
Eg. Carbaryl, Carbofuran, Carbosulfan
v. Synthetic pyrethroids ; (Synthetic analogues of pyrethrum)
Eg. Allethrin, Cypermethrin, Fenvalerate
vi. Miscellaneous compounds
Neonicotinoids (Analogues of nicotine) eg. Imidacloprid Spinosyns
(Isolated from actinomycetes) eg. Spinosad Avermectins (Isolated
from bacteria) eg. Avermectin, Vertimec Fumigants : Eg. Aluminium
phosphide, Hydrogen cyanide, EDCT
94 www.AgriMoon.CoM
Lecture 20 THE INSECTICIDES ACT, 1968
An act to regulate the import, manufacture, sale, transport, distribution and use of
insecticides with a view to prevent risk to human beings on animals and for matters connected
therewith.
Salient features of the Insecticides Act
Compulsory registration of the product at the Central level and licenses for manufacture,
formulation and sale at state level.
Inter – departmental / ministerial / organizational co-ordination is achieved by a high level
advisory board “Central Insecticides Board” with 24 members (to be raised to 29 by an
amendment) drawn from various fields having expert knowledge of the subject.
“Registration Committee” to look after the registration aspects of all Insecticides.
Establishment of enforcement machinery like Insecticide Analysts and Insecticide Inspectors
by the Central or State Government.
Establishment of Central Laboratory
Power to prohibit the import, manufacture, and sale of pesticides and also confiscate the
stocks. The offences are punishable and size and other penalties are prescribed.
Both the Central and State Governments are empowered to make rules, prescribe forms and
fees.
The Central Insecticides Board (CIB)
The Central Insecticides Board advices on matters relating to:
The risk to human beings or animals involved in the use of insecticides and the safety
measures necessary to prevent such risk.
The manufacture, sale, storage, transport, distribution of insecticides with a view to ensure
safety to human beings and animals.
Board members
The Director General Health Services ➜ Chairman

The Drugs Controller, India
The Plant Protection Adviser to the Government of India
The Director General, ICAR
The Director General, ICMR
Totally 24 members – others from various other fields such as BIS, Animal
husbandry, Pharmacology, Fisheries, Wild life etc.,
The Registration Committee (RC)
RC comprises a Chairman and five members. Among them are:
1. Deputy Director General, Crop Sciences, ICAR-Chairman

2. Drugs Controller, India
3. Plant Protection Adviser to the Government of India
Role of RC
To register insecticides after scrutinizing them with regard to efficacy and safety.
95 www.AgriMoon.CoM
Registration of Insecticides
When applied for registration, the RC allots a registration number within a period of 12
months.
When pesticide registered for first time in India, provisional registration for two years given
initially. After data generation full registration allowed.
The Central Insecticides Laboratory (CIL)
CIL carrys out the analysis relating to insecticide registration and other matters.
Insecticide Inspectors
Central or State Government appoints person called Insecticide Inspector who is

empowered.
a. To enter and search premises

b. To stop the distribution or sale or use of insecticide
c. Take samples of insecticide and send for analysis
The Insecticides Rules, 1971
There are nine chapters in the insecticide rule, 1971 relating to the functions of CIB,
RC, CIL, grant of licenses, packing, labelling, first aid, antidate protective clothings etc.,
Insecticide residues and waiting period

Residues
The toxicant that remains in the environment (like soil, water, plant harvested
produce, etc.) after the application of insecticides. The duration of retension is called
persistence.
- Only 1% of the pesticide applied to crop reaches the target. The remaining 99%
contaminate soil, water, air, food, forage, etc.
- When surveyed in India 20% of market samples of food commodities were having
residues above legal MRL (maximum residue limits).
- 37% of milk samples contaminated with DDT above MRL (0.05 mg/kg)
- Due to contamination the dietary intake of DDT and HCH are above ADI
(acceptable daily intake) in India.
- Waiting period must be observed which is the minimum period allowed between
time of application of pesticide and harvest of commodities in order to allow the
toxicant residue level to come below MRL.
The following are some examples of waiting period of some chemicals in a

few important crops
Crop Insecticide and Dose Waiting period (days)
1. Chillies Dicofol 0.05% 1
Quinalphos 0.05% 8
96 www.AgriMoon.CoM
2. Tomato Phosalone 0.05% 3

Quinalphos 0.05% 5
3. Brinjal Phosalone 0.05% 2
Endosulfan 0.07% 3
Aldicarb 1 kg a.i./ha 60
Role of pesticides in IPM
1. Pesticide should be applied only based on the need, i.e. if pest reaches ETL.
2. It should be judiciously combined with other components of IPM and pesticides
should be used as last resort.
3. When pest population approaches ETL, insecticides are the only means of
preventing economic damage.
4. Insecticides are available in easy and ready to use packings.
5. Easy to apply and large area can be covered.
6. A range of insecticides are available depending on crop, insect and nature of
damage.
7. Pesticides which are cost effective (High benefic/cost ratio) and safe (High
benefit/risk ratio) should be used in IPM.
97 www.AgriMoon.CoM
Lecture 21: PHEROMONES
Semiochemicals are chemical substances that mediate communication

between organisms. Semiochemicals maybe classified into Pheromones (intraspecific
semiochemicals) and Allelochemics (interspecific semiochemicals).
Pheromones are chemicals secreted into the external environment by an

animal which elicit a specific reaction in a receiving individual of the same species.
Pheromones are volatile in nature and they aid in communication among insects.
Pheromones are exocrine in origin (i.e. secreted outside the body). Hence they
were earlier called as ectohormones. In 1959, German chemists Karlson and
Butenandt isolated and identified the first pheromone, a sex attractant from silkworm
moths. They coined the term pheromone. Since this first report, hundreds of
pheromones have been identified in many organisms. The advancement made in
analytical chemistry aided pheromone research.
Based on the responses elicited pheromones can be classified into 2 groups
a) Primer pheromones: They trigger off a chain of physiological changes in

the recipient without any immediate change in the behaviour. They act through
gustatory (taste) sensilla. (eg.) Caste determination and reproduction in social insects
like ants, bees, wasps, and termites are mediated by primer pheromones. These
pheromones are not of much practical value in IPM.
b) Releaser pheromones: These pheromones produce an immediate change in

the behaviour of the recipient. Releaser pheromones may be further subdivided based
on their biological activity into
Sex pheromones
Aggregation pheromones
Alarm pheromones
Trail pheromones
Releaser pheromones act through olfactory (smell) sensilla and directly act on
the central nervous system of the recipient and modify their behaviour. They can be
successfully used in pest management programmes.
1) Sex pheromones are released by one sex only and trigger behaviour
patterns in the other sex that facilitate in mating. They are most commonly released
by females but may be released by males also. In over 150 species of insects, females
have been found to release sex pheromones and about 50 species males produce.
98 www.AgriMoon.CoM
Aphrodisiacs are substances that aid in courtship of the insects after the two sexes are
brought together. In many cases males produce aphrodisiacs.
Major differences between male and female produced pheromones are listed
below.
Sl.
Properies Female sex pheromone Male sex pheromone
No
1. Range Acts at a long range. Attracts Acts at a short distance
males from long distance
2 Role of other Play less role Visual and auduitory stimuli
stimuli play major role
3. Action elicited Atrracts and excites males to Lowers females resistance to
in the other sex copulate mating
4. Importance in More important Less important
IPM
Insect orders producing sex pheromones
Lepidoptera, Orthoptera, Dictyoptera, Diptera, Coleoptera, Hymenoptera,

Hemiptera, Neuroptera and mecoptera. In Lepidoptera, sex pheromonal system is
highly evolved.
Pheromone producing glands:
In Lepidoptera they are produced by eversible glands at the tip of the

abdomen of the females. The posture shown during pheromone release is called
‘calling position’. Aphrodisiac glands of male insects are present as scent brushes (or
hair pencils) at the tip of the abdomen (eg. Male butterfly of Danaus sp.).
Andraconia are glandular scales on wings of male moths producing aphrodisiacs.
Pheromone reception:
Female sex pheromones are usually received by olfactory sensillae on male

antennae and males search upwind, following the odour corridor of the females. In
pheromone perceiving insects, the antennae of male moths are larger and greatly
branched than female moths to accommodate numerous olfactory sensilla.
Chemical nature of sex pheromones
In general pheromones have a large number of carbon atoms (10-20) and high
molecular weight (180 – 300 daltons). Narrow specificity and high potency are two
99 www.AgriMoon.CoM
attributes which depend on long chain carbon atoms and high molecular weight. But since
pheromones are volatile their molecular weights cannot be very high as they cannot be
carried by wind.
Butenandt and his coworkers in 1959 isolated 12mg of pheromone from the abdomen
of half a million virgin females of silkworm. They named the pheromene as Bombykol.
The chemical name is 10,12 – hexadeca dienol. It is a primary alcohol.
The following are some of the female sex pheromones identified in insects
Sl. No. Name of the Insect Pheromone

1. Silkworm, Bombyx mori Bombykol
2. Gypsy moth, Porthesia dispar Gyplure, disparlure
3. Pink bollworm ,Pectinophora gossypiella Gossyplure
4. Cabbage looper, Trichoplusia ni Looplure
5. Tobacco cutworm, Spodoptera litura Spodolure, litlure
6. Gram pod borer, Helicoverpa armigera Helilure
7. Honey bee queen, Apis sp. Queen’s substance
Examples of male sex pheromones
Cotton boll weevil, Anthonomas grandis, Coleoptera

Cabbage looper, Trichoplusia ni, Lepidoptera
Mediterranean fruitfly, Ceratitis capitata, Diptera.
Multi-component pheromone system : If the pheromone of an insect is composed of only

one chemical compound we call it monocomponent pheromone system. Pheromones of some
insects contain more than one chemical compound. In this case we call it as multi-
component pheromone system. The sex pheromone of two different species may contain
same chemical compounds but the ratio of the compounds may vary. This brings about
species specificity.
Pest Management With Sex Pheromones

Synthetic analogues of sex pheromones of quite large No. of pests are now available
for use in Pest management. Sex pheromones are being used in pest management in three
different ways.
a) In sampling and detection (Monitoring)
b) To attract and kill (Mass trapping)
c) To disrupt mating (Confusion or Decoy method)
a) In sampling and detection (Monitoring) :
Pheromones can be used for monitoring pest incidence/ outbreak in the
following ways.
100 www.AgriMoon.CoM
Lecture 22 : STERIITY METHODS - DEFINITON - PRINCIPLES -

METHODS - REQUIREMENTS AND LIMITATIONS
Sterility method - Definition

Control of pest population achieved by releasing large number of sterilised
male insects, which will compete with the normal males and reduce the insect
population in subsequent generation.
It is usually referred as SIT (Sterile insect technique) or SIRM (Sterile insect

release method)
Sterile insect release method is a genetic control method. This is also called
Autocidal control since insects are used against members of their own species.
E.F. Knipling in 1937 in South East USA used the SIRM technique to control
the screw wormfly (Cochliomyia nominivorax) a serious livestock pest.
The sterile to fertile male ratio, called S:F ratio is important, as the reduction
in reproductive potential of natural population depends on S:F ratio.
The mating with the sterile males will produce inviable or sterile eggs.
Trend of hypothetical population subjected to SIRM

Assumption
1. Female:Male ratio 1:1
2. 1 female produces 5 females as off spring in one generation
No.of females No.of sterile No.of Ratio sterile No. of

Generation without males females to normal fertile
releases released releases(9:1) males females
1. 1,000,000 9,000,000 1,000,000 9:1 100,000
2. 5,000,000 9,000,000 500,000 18:1 26,316
3. 25,000,000 9,000,000 131,579 68:1 1,907
4. 125,000,000 9,000,000 9,535 944:1 10
5. 625,000,000 9,000,000 50 180,000:1 0
In suitable circumstances sterile male release method (SIRM) can be more

effective, compared to insecticide application.
Comparison of SIRM with insecticide - Trend of hypothetical population
Generation No. of females No. of females with No. of females with

with no treatment sterile release (9:1) insecticide (90% kill)
1. 1,000,000 1,000,000 1,000,000
2. 5,000,000 500,000 500,000
3. 25,000,000 131,579 250,000
4. 125,000,000 9,535 125,000
5. 625,000,000 50 62,500
6. 3,125,000,000 0 31,250
SIRM technique can also be used after insecticide application which will be
more effective.
Circumstances for using this method

1. Against well established pest when their population density is low
2. Against newly introduced pest
3. Against isolated population as in island
4. Combined with cultural and chemical methods
Methods of sterilizatoin
1. Chemosterilants: Any chemical which interfere with the reproductive capacity of
an insect.
a. Alkylating agents
They inhibit nucleic acid synthesis
inhibit gonad development
produce mutagenic effect
(e.g.) TEPA, Chloro ethylamine
b. Antimetabolites
Chemicals having structural similarity to biologically active substances. They
interfere with nucleic acid synthesis. e.g. 5-Fluororacil, Amithopterin
Methods of sterilization - continued

II. Irradiation
Irradiation done by exposing insects to , , radiations, X rays and neutrons.
Of these, -radiation by 60CO (cobalt) with its half-life of 60 years is the most
common method.
Irradiation causes following sterility effects in insects

Infecundity Aspermia
Inability to male
Dominant lethal mutation
Radiation dose required for different species and stages for sterilization
(expressed as rads - radiation absorbed dose).
Insect Stage Dose
Housefly 2-3 day pupae 3000 rads
Screw worm 5 day pupae 2500 rads
1 day adult 5000 rads
Sterilizing natural population

In this method, instead of releasing sterilised males into the field, a chemosterilant is
sprayed in field like insecticide. The chemosterilant sterilizes both male and female. These
do not produce offspring-equivalent to killing them.
Bonus effect: The bonus effect of this method is that the sterilized males mate with
normal females and reduce their reproductive capacity.
Chemosterilants used are TEPA, HEMPA, BISULFAN, etc.
Requirements for SIRM
1. A method inducing sterility without impairing sexual behaviour of insects.

2. Mass rearing of the insects
3. Information on population density and its rate of increase
4. The released insects must not cause damage to the crops, livestock or human beings
5. Good intermingling of released and natural population
6. Releasing sterilized insects when the wild population is abundant
7. This method is effective against newly introduced pest or isolated insect
population as in island.
8. There should be high sterile to fertile (S:F) ratio for quicker control.
Limitations of SIRM
1. Not effective against insects which are prolific breeders
2. Sterilizing and mutagenic effect of chemosterilants and irradiation cause problem in
higher animals and man (Carcinogenic and mutagenic)
Lecture 23: INSECT GROWTH REGULATORS
Insect Growth Regulators (IGRs) are compounds which interfere with the
growth, development and metamorphosis of insects. IGRs include synthetic analogues
of insect hormones such as ecdysoids and juvenoids and non-hormonal compounds
such as precocenes (Anti JH) and chitin synthesis inhibitors.
Natural hormones of insects which play a role in growth and development are
1. Brain hormone: The are also called activation hormone(AH). AH is secreted

by neuro secretory cells (NSC) which are neurons of central nervous system
(CNS). It’s role is to activate the corpora allata to produce juvenile hormone
(JH).
2. Juvenile hormone (JH): Also called neotinin. It is secreted by corpora allata
which are paired glands present behind insect brain. Their role is to keep the
larva in juvenile condition. JH I, JH II, JH III and JH IV have been identified
in different groups of insects. The concentration of JH decreases as the larva
grows and reaches pupal stage. JH I, II and IV are found in larva while JH III
is found in adult insects and are important for development of ovary in adult
females.
3. Ecdysone: Also called Moulting hormone (MH). Ecdysone is a steroid and is
secreted by Prothoracic Glands (PTG) present near prothoracic spiracles.
Moulting in insects is brought about only in the presence of ecdysone.
Ecdysone level decreases and is altogether absent in adult insects.
IGRs used in Pest management
a) Ecdysoids: These compunds are synthetic analogues of natural ecdysone. When

applied in insects, kill them by formation of defective cuticle. The development
processes are accelerated bypassing several normal events resulting in integument
lacking scales or wax layer.
b) Juvenoids (JH mimics) : They are synthetic analogues of Juvenile Hormone

(JH). They are most promising as hormonal insecticides. JH mimics were first
identified by Williams and Slama in the year 1966. They found that the paper
towel kept in a glass jar used for rearing a Pyrrhocoris bug caused the bug to die
before reaching adult stage. They named the factor from the paper as ‘paper
factor’ or ‘juvabione’. They found that the paper was manufactured from the
wood pulp of balsam fir tree (Abies balsamea) which contained the JH mimic.
Juvenoids have anti-metamorphic effect on immature stages of insect. They

retain status quo in insects (larva remains larva) and extra (super numerary)
moultings take place producing super larva, larval-pupal and pupal-adult

intermediates which cause death of insects. Juvenoids are larvicidal and ovicidal
in action and they disrupt diapause and inhibit embryogenesis in insects.
Methoprene is a JH mimic and is useful in the control of larva of hornfly, stored

tobacco pests, green house homopterans, red ants, leaf mining flies of vegetables
and flowers
c) Anti JH or Precocenes: they act by destroying corpora allata and preventing JH

synthesis. When treated on immature stages of insect, they skip one or two larval
instars and turn into tiny precocious adults. They can neither mate, nor oviposit
and die soon. Eg. EMD, FMev, and PB (Piperonyl Butoxide)
d) Chitin Synthesis inhibitors: Benzoyl phenyl ureas have been found to have the
ability of inhibiting chitin synthesis in vivo by blocking the activity of the enzyme
chitin synthetase. Two important compounds in this category are Diflubenzuron
(Dimilin) and Penfluron. The effects they produce on insects include
Disruption of moulting
Displacement of mandibles and labrum
Adult fails to escape from pupal skin and dies
Ovicidal effect.
Chitin sysnthesis inhibitors have been registered for use in many countries and
used successfully against pests of soybean, cotton, apple, fruits, vegetables, forest
trees and mosquitoes and pests of stored grain
IGRS from Neem : Leaf and seed extracts of neem which contains azadirachtin as
the active ingredient, when applied topically causes growth inhibition, malformation,
mortality and reduced fecundity in insects.
Hormone mimics from other living organisms: Ecdysoids from plants

(Phytoecdysones) have been reported from plants like mulberry, ferns and conifers.
Juvenoids have been reported from yeast, fungi, bacteria, protozoans, higher animals
and plants.
Advantages of Using IGRs
Effective in minute quantities and so are economical

Target specific and so safe to natural enemies
Bio-degradable, non-persistent and non-polluting
Non-toxic to humans, animals and plants
Disadvantages
Kills only certain stages of pest

Slow mode of action
Since they are chemicals possibility of build-up of resistance
Unstable in the environment
ANTIFEEDANTS
Antifeedants are chemicals that inhibit feeding in insects when applied on the foliage
(food) without impairing their appetite and gustatory receptors or driving (repelling)
them away from the food. They are also called gustatory repellents, feeding deterrents
and rejectants. Since do not feed on trated surface they die due to starvation.
Groups of antifeedants
Triazenes: AC 24055 has been the most widely used triazene which is a oduorless,
tasteless, non-toxic chemical which inhibit feeding in chewing insects like
caterpillars, cockroaches and beetles.
Organotins. They are compounds containing tin. Triphenyl tin acetate is an important
antifeedants in this group effective against cotton leaf worm, Colarado potato
beetle, caterpillars and grass hoppers
Carbamates: At sublethal doses thiocarbamates and phenyl carbamates act as

antifeedants of leaf feeding insects like caterpillars and Colarado potato beetle.
Baygon is a systemic antifeedants against cotton boll weevil.
Botanicals: Antifeedants from non-host plants of the pest can be used for their
control The following antifeedants are produced from plants.
Pyrethrum: Extracted from flowers of Chrysanthemum cinerarifolium acts as

antifeedants at low doses against biting fly, Glossina sp.
Neem: Extracted from leaves and fruits of neem (Azadirachta indica) is an
antifeedant against many chewing pests and desert locust in particular
Apple factor: Phlorizin is extracted from apple which is effective against non-
apple feeding aphids.
Solanum alkaloids: Leptine, tomatine and solanine are alkaloids extracted
from Solanum plants and are antifeedants to leaf hoppers.
Miscellaneous compounds: Compounds like copper stearate, copper resinate,

mercuric chloride and Phosphon are good antifeedants.
Mode of action: Antifeedants inhibit the gustatory (taste) receptors of the mouth
region. Lacking the right gustatory stimulus the insect fails to recognize the trated leaf
as food. The insect slowly dies due to starvation.
Advantages:
Affect plant feeders, but safe to natural enemies

Pest not immediately killed, so natural enemies can feed on them
No phytotoxicity or pollution
Disadvantages
Only chewing insects killed and not sucking insects
Not effective as sole control measure, can be included in IPM
INSECT ATTRACTANTS
Chemicals that cause insects to make oriented movements towards their source
are called insect attractants. They influence both gustatory (taste) and olfactory
(smell) receptors.
Types of Attractants:
1. Pheromones: Pheromones are chemicals secreted into the external environment
by an animal which elicit a specific reaction in a receiving individual of the
same species.
2. Food lures : Chemical present in plants that attract insect for feeding. They
stimulate olfactory receptors.
List of natural and synthetic food lures
Insects Lure
Natural
Pests of cruciferae Isothiocyanates from seeds of cruciferae
Onion fly (Hylemya antiqua) Propylmercaptan from onions
Bark beetle Terpenes from barks
Housefly Sugar and molasses
Synthetic
Oriental fruitfly (Dacus dorsalis) Methyl eugenol
Melon fruitfly (Dacus cucurbitae) Cuelure
Mediterranean fruitfly Trimedlure
(Ceratitis capitata)
3. Oviposition lures: These are chemicals that govern the selection of suitable
sites for oviposition by insects. For example extracts of corn attracts
Helicoverpa armigera for egg laying on any treated surface.
Use of Attractants in IPM

Insect attractants are used in 3 ways in pest management
a) Sampling and monitoring pest population

b) Luring pests to insecticide coated traps or poison baits
Examples of poison baits

For biting insects: Moistened Bran + molasses) + insecticides
For sucking insects : Sugar solution + insecticide
For fruitflies: Trimedlure/ Cuelure/ Methyl eugenol + insecticides
For cockroaches: Sweet syrup + white or yellow phosphorus
For sweet-loving ants : Thallous sulphste + sugar + honey + glycerine +
water
For meat loving ants : Thallous sulphate + peanut butter
c) in distracting insects from normal mating, aggregation, feeding or oviposition

The female insects if lured to wrong plants for egg laying, the emerging larva will
starve to death
Advantage of using attractants is that they are specific to target insects and NE not
affected. But they cannot be relied as the sole method of control and can only be
included in IPM as a component.
INSECT REPELLENTS
Chemicals that induce avoiding (oriented) movements in insects away from
their source are called repellents. They prevent insect damage to plants or animals
by rendering them unattractive, unpalatable or offensive.
Types of repellents
1. Physical repellents : Produce repellence by physical means
a) Contact stimuli repellents: Substances like wax or oil when applied on leaf
surface changes physical texture of leaf which are disagreeable to insects
b) Auditory repellents: Amplified sound is helpful in repelling mosquitoes.
c) Barrier repellents: Tar bands on trees and mosquito nets are examples.
d) Visual repellents: Yellow light acts as visual repellents to some insects.
e) Feeding repellents: Antifeedants are feeding repellents. They inhibit feeding.
2. Chemical repellents:
a) Repellents of Plant origin: Essentials oils of Citronella, Camphor and
cedarwood act as repellents. Commercial mosquito repellent ‘Odomos’ uses
citronella oil extracted from lemongrass, Andrpogon pardus as repellent.
Pyrethrum extracted form Chrysanthemum is a good repellent and has been used
against tsetse fly, Glossina morsitans.
b) Synthetic repellents: Repellents synthetically produced.
List of important synthetic repellents

Insects Repellents
Mosquito, blood suckers Dimethyl pthalate
Mites (chiggers) Benzyl benzoate
Crawling insects Trichlorobenzene
Phytophagous insects Bordeaux mixture
Wood feeders Pentachlorophenol
Fabric eaters Naphthalene or mothballs
Bees Smoke
Uses of repellents:
They can be applied on body to ward off insects
Used as fumigants in enclosed area.
Used as sprays on domestic animals
To drive away insects from their breeding place.
BIORATIONAL CONTROL
Controlling insects using chemicals that affect insect behaviour, growth or
reproduction, is called biorational control.
Insect Growth Regulator,
Chitin synthesis inhibitor,
JH analogues, Anti JH,
Moulting hormone,
Pheromones All these methods are included in
Allelochemics Biorational method of control
Attractant, Repellent,
Antifeedant,
Chemosterilant,
Sterile male release
They are called biorational agents in pest control, because of their selective nature
in killing only the target insects without affecting non target organisms.
Lecture 24 PESTICIDE APPLICATION METHODS
The desired effect of a pesticide can be obtained only if it si applied by an

appropriate method in appropriate time. The method of application depends on nature
of pesticide, formulation, pests to be managed, site of application, availability of
water etc.
1. Dusting : Dusting is carried out in the morning hours and during very light air
stream. It can be done manually or by using dusters. Some times dust can be
applied in soil for the control of soil insects. Dusting is cheaper and suited for dry
land crop pest control.
2. Spraying : Spraying is normally carried out by mixing EC (or) WP formulations

in water. There are three types of spraying.
Spray Droplet Area Equipment used

fluid (litre size covered
per acre) per day
a) High volume spraying 200-400 150 2.5 ac Knapsack, Rocker
sprayers
b) Low volume spraying 40-60 70-150 5.6 ac Power sprayer, Mist
blower
c) Ultra low volume 2-4 lit. 20-70 20 ac ULV sprayer,
spraying Electrodyn sprayer
3. Granular application : Highly toxic pesticides are handled safely in the form
of granules. Granules can be applied directly on the soil or in the plant parts.
The methods of application are
a) Broadcasting : Granules are mixed with equal quantity of sand and

broadcasted directly on the soil or in thin film of standing water. (eg.)
Carbofuran 3G applied @ 1.45 kg/8 cent rice nursery in a thin film of water
and impound water for 3 days.
b) Infurrow application : Granules are applied at the time of sowing in furrows

in beds and covered with soil before irrigation. (eg.) Carbofuran 3G applied @
3 g per meter row for the control of sorghum shootfly.
c) Side dressing : After the establishment of the plants, the granules are applied
a little away from the plant (10-15 cm) in a furrow.
d) Spot application : Granules are applied @ 5 cm away and 5 cm deep on the

sides of plant. This reduces the quantity of insecticide required.
e) Ring application : Granules are applied in a ring form around the trees.
f) Root zone application : Granules are encapsulated and placed in the root
zone of the plant. (eg.) Carbofuran in rice.
g) Leaf whorl application : Granules are applied by mixing it with equal

quantity of sand in the central whorl of crops like sorghum, maize, sugarcane
to control internal borers.
h) Pralinage : The surface of banana sucker intended for planting is trimmed.

The sucker is dipped in wet clay slurry and carbofuran 3G is sprinkled (20-40
g/sucker) to control burrowing nematode.
4. Seed pelleting/seed dressing : The insecticide mixed with seed before sowing
(eg.) sorghum seeds are treated with chlorphyriphos 4 ml/kg in 20 ml of water
and shade dried to control shootfly. The carbofuran 50 SP is directly used as
dry seed dressing insecticide against sorghum shootfly.
5. Seedling root dip : It is followed to control early stage pests (eg.) in rice to
control sucking pests and stem borer in early transplanted crop, a shallow pit
lined with polythene sheet is prepared in the field. To this 0.5 kg urea in 2.5
litre of water and 100 ml chlorpyriphos in 2.5 litre of water prepared
separately are poured. The solution is made upto 50 ml with water and the
roots of seedlings in bundles are dipped for 20 min before transplanting.
6. Sett treatment : Treat the sugarcane setts in 0.05% malathion for 15 minutes
to protect them from scales. Treat the sugarcane setts in 0.05% Imidacloprid
70 WS
@ 175 g/ha or 7 g/l dipped for 16 minutes to protect them from termites.
7. Trunk/stem injection : This method is used for the control of coconut pests
like black headed caterpillar, mite etc. Drill a downward slanting hole of 1.25
cm diameter to a depth of 5 cm at a light of about 1.5 m above ground level
and inject 5 ml of monocrotophos 36 WSC into the stem and plug the hole
with cement (or) clay mixed with a fungicide. Pseudo stem injection of
banana, an injecting gun or hypodermic syringe is used for the control of
banana aphid, vector of bunchy top disease.
8. Padding : Stem borers of mango, silk cotton and cashew can be controlled by
this method. Bark of infested tree (5 x 5 cm) is removed on three sides leaving
bottom as a flap. Small quantity of absorbant cotton is placed in the exposed
area and 5-10 ml of Monocrotophos 36 WSP is added using ink filler. Close
the flap and cover with clay mixed with fungicide.
9. Swabbing : Coffee white borer is controlled by swabbing the trunk and
branches with HCH (BHC) 1 per cent suspension.
10. Root feeding : Trunk injection in coconut results in wounding of trees and
root feeding is an alternate and safe chemical method to control black headed
caterpillar, eriophyid mite, red palm weevil. Monocrotophos 10 ml and equal
quantity of water are taken in a polythene bag and cut the end (slant cut at 45)
of a growing root tip (dull white root) is placed inside the insecticide solution
and the bag is tied with root. The insecticide absorbed by root, enter the plant
system and control the insect.
11. Soil drenching : Chemical is diluted with water and the solution is used to
drench the soil to control certain subterranean pests. (eg.) BHC 50 WP is
mixed with water @ 1 kg in 65 litres of water and drench the soil for the
control of cotton/stem weevil and brinjal ash weevil grubs.
12. Capsule placement : The systemic poison could be applied in capsules to get
toxic effect for a long period. (eg.) In banana to control bunchy top vector
(aphid) the insecticide is filled in gelatin capsules and placed in the crown
region.
13. Baiting : The toxicant is mixed with a bait material so as to attract the insects
towards the toxicant.
a) Spodoptera : A bait prepared with 0.5 kg molasses, 0.5 kg carbaryl 50 WP
and 5 kg of rice bran with required water (3 litres) is made into small pellets
and dropped in the field in the evening hours.
b) Rats : Zinc phophide is mixed at 1:49 ratio with food like popped rice or
maize or cholam or coconut pieces (or) warfarin can be mixed at 1:19 ratio
with food. Ready to use cake formulation (Bromodiolone) is also available.
c) Coconut rhinoceros beetle : Castor rotten cake 5 kg is mixed with
insecticide.
14. Fumigation : Fumigants are available in solid and liquid forms. They can be
applied in the following way.
a) Soil : To control the nematode in soil, the liquid fumigants are injected by
using injecting gun.
b) Storage : Liquid fumigants like Ethylene dibromide (EDB), Methyl bromide (MB),
carbon tetrachloride etc. and solid fumigant like Aluminium phosphide are
recommended in godowns to control stored product pest.
c) Trunk : Aluminium phosphide 7f to I tablet is inserted into the affected
portion of coconut tree and plugged with cement or mud for the control of red palm weevil
Lecture 25 : PESTICIDE COMPATIBILITY

- In pest control treatment, two or more pesticides, fungicides or even fertilizers are
sprayed or applied in the same operation to minimize cost of labour.
- Before mixing two different chemicals, their physical and chemical properties
should be well understood.
- Incompatible pesticides should not be mixed. Only compatible pesticides can be
mixed.
Incompatability of pesticides may be of following types

a. Chemical incompatibility
Chemical compounds in the two pesticides react with the another producing a
different compound, reducing the pesticidal activity of the pesticides (Degradation of
active ingredient).
b. Biological incompatibility (Phytotoxic incompatibility)

The mixed product exhibit phytotoxic action, which independantly is not
phytotoxic.
c. Physical incompatibility
The physical form of the pesticides change, and one of them become unstable
or hazardous for application (agglomeration, phase separation, explosive reaction,
etc.).
HAZARDS CAUSED BY PESTICIDES

The adverse effect caused by pesticides to human beings during manufacture,
formulation, application and also consumption of treated products is termed as the
hazard.
Pesticide hazard occurs at the time of
a. Manufacturing and formulation
b. Application of pesticides
c. Consumption of treated products
Examples of hazards caused by pesticides

1. In Kerala, in 1953, 108 people died due to parathion poisoning
2. ‘Bhopal Gas Tradedy’ in 1984 at Bhopal where the gas called Methyl isocyanate
(MIC) (an intermediate involved in manufacture of carbaryl) leaked killing 5000
people and disabling 50,000 people. Totally 2,00,000 persons were affected.
Long term effects like mutagenic and carinogenic effects are felt by survivors.
3. Cases of Blindness, Cancer, Liver and Nervous system diseases in cotton growing
areas of Maharashtra where pesticides are used in high quantity.
4. Psychological symptoms like anxiety, sleep disturbance, depression, severe head
ache in workers involved in spraying DDT, malathion regularly.
5. Endosulfan - causing problem due to aerial spraying in cashew in Kerala - recent

controversy - yet to be studied in detail.
Safe handling of pesticides

1. Storage of pesticides :
a) Store house should be away from population areas, wells, domestic water
storage, tanks.
b) All pesticides should be stored in their original labeled containers in tightly
sealed condition.
c) Store away from the reach of children, away from flames and keep them under
lock and key.
2. Personal protective equipment

a) Protective clothing that covers arms, legs, nose and head to protect the skin.
b) Gloves and boots to protect hands and feet.
c) Helmets, goggles and facemask to protect hair, eyes and nose.
d) Respirator to avoid breathing dusts, mists and vapour.
3. Safety in application of pesticides

Safe handling of pesticides (Fig.68) involves proper selection and careful
handling during mixing and application.
a) Pesticide selection : Selection of a pesticide depend on the type of pest,
damage, losses caused, cost etc.
b) Safety before application :
i. Read the label and leaflet carefully.
ii. Calculate the required quantity of pesticides.
iii. Wear protective clothing and equipment before handling.
iv. Avoid spillage and prepare spray fluid in well ventilated area.
v. Stand in the direction of the wind on back when mixing pesticides.
vi. Do not eat, drink or smoke during mixing.
vii. Dispose off the containers immediately after use.
c) Safety during application
i. Wear protective clothing and equipment.
ii. Spray should be done in windward direction.
iii. Apply correct coverage.
iv. Do not blow, suck or apply mouth to any spray nozzle.
v. Check the spray equipment before use for any leakage.
d) Safety after application

i. Empty the spray tank completely after spraying.
ii. Avoid the draining the contaminated solution in ponds, well or on the
grass where cattle graze.
iii. Clean the spray equipment immediately after use.
iv. Decontaminate protective clothing and foot wear.
v. Wash the hands thoroughly with soap water, preferably have a bath.
vi. Dispose off the containers by putting into a pit.
vii. Sprayed field must be marked and unauthorized entry should be
prevented.
First aid : In cane of suspected poisoning; call on the physician immediately. Before
calling on a doctor, first aid treatments can be done by any person.
Swallowed poison
i. During vomiting, head should be faced downwards.
ii. Stomach content should be removed within 4 h of poisoning.
iii. To give a soothing effect, give either egg mixed with water, gelatin, butter,
cream, milk, mashed potato.
iv. In case of nicotine poisoning, give coffee or strong tea.
Skin contamination
i. Contaminated clothes should be removed.
ii. Thoroughly wash with soap and water.
Inhaled poison
i. Person should be moved to a ventilated place after loosing the tight cloths.
ii. Avoid applying frequent pressure on the chest.
III. Antidotes and other medicine for treatment in pesticide poisoning
S.No. Antidote / Medicine Used in poisoning due to
1. Common salt (Sodium chloride) Stomach poison in general
2. Activated charcoal (7g) in warm Stomach poison in general

Magnesium oxide (3.5g) water
Tannic acid (3.5g)
3. Gelatin (18 g in water) or Flour or milk Stomach poison in general

power (or) Sodium thiosulphate
4. Calcium gluconate Chlorinated insecticide, Carbon

tetrachloride, ethylene dichloride,
Mercurial compound
5. Phenobarbital (or) Pentobarbital Stomach poison of chlorinated

intravenous administration hydrocarbon insecticides
6. Sodium bicarbonate Stomach poison of

organophosphate compounds
7. Atropine sulphate (2-4 mg Organophosphate Compounds

intramuscular / intravenous
administration) or PAM (Pyridine-Z
aldoxime-N-methliodide)
8. Atropine sulphate (2-4 mg Carbamates

intramuscular / intravenous
administration)
9. Phenobarbital Synthetic pyrethoid
10. Potassium permanganate Nicotine, Zinc phosphide
11. Vitamin K1 and K2 Warfarin, Zinc phosphide
13. epinephrine Methlyl bromide
14. Methyl nitrite ampule Cyanides
Impact of Pesticides in Agroecosystem

The following are some problems caused by pesticides in agro-eco system
1. Pesticide residues
2. Insecticide resistance
3. Insect resurgence and secondary pest outbreak
4. Toxicity to non target organism
1. Pesticide residues
The pesticide that remains in the environment after application causes
problems to humans and non-target organisms (Already dealt in theory - Read) e.g.
Residues of DDT, HCH in milk, vegetable above MRL.
2. Insecticide resistance
Insecticide resistance is the development of an ability to tolerate a dose of
insecticide, which would prove lethal (kill) to majority of the individuals of the same
species.
This ability is due to the genetic change in pest population in response to

pesticide application.
Insecticide resistance in insect pests in India
Name of pest Common name Insecticides to which resistant

1. Aphis craccivora Aphid Carbamates, OP, Cypermethrin,
2. Bemesia tabaci Whitefly Endosulfan, Monocrotophos
3. Helicoverpa armigera Cotton boll worm OP, Synthetic pyrethroid,

Bacillus thuringiensis
4. Plutella xylostella Diamond back Abamectin, Bt, OP compounds
moth on cabbage,
cauliflower
Simple resistance : Insect develops resistance only against the insecticide to

which
it is exposed
Cross resistance : Insect develops resistance not only to exposed insecticide but
also to other related insecticides to which it is not exposed.
Pest Resurgence
Tremendous increase in pest population brought about by insecticides despite
good initial reduction in pest population at the time of treatment.
Insecticides lead to pest resurgence in two ways.
After initial decline, resistant population increase in large numbers
Killing of natural enemies of pest, cause pest increase
e.g. Quinalphos, phorate - Cause resurgence of BPH in rice
Carbofuran - Leaf folder in rice
Secondary pest outbreak

Application of a pesticide against a major pest, kills the natural enemies of
minor or secondary pest. This causes the outbreak of a secondary pest.
e.g. Use of synthetic pyrethroids against bollworms in cotton killed natural enemies
of whitefly causing an outbreak of whitefly which was a minor pest till then.
Toxicity of non-target organisms
i. Natural enemies : Predators and parasitoids are killed loading to pest

outbreak
ii. Bee toxicity : Bees are important pollinators. Killing bees reduce
crop productivity
iii. Soil organisms : Soil organisms like microbes, arthropods, earthworm,
etc. are required for maintaining soil fertility. These

are killed by some pesticides e.g. DDT, HCH
iv. Fishes : Pesticides from treated surface run off to nearby lakes
and kill the fishes
Hence while choosing an insecticide it should be safe (causing less harm) to these
organisms.
Specific IPM practices for rice and cotton. Biotechnology in pest

management.
Lecture 26: IMPACT OF GLOBAL WARMING ON PESTS
What is global warming?
SUN Earth reflects some solar energy

as infrared radiation
Green house gases
Infra red radiation from earth

reflected back to earth by green
house gases. This increases the
Solar radiation temperature of earth and lower
falls on earth atmosphere. This is called
surface. Earth global warming or greenhouse
absorbs and effect
gets heated up EARTH
- Warmth from sun heats the surface of the earth

- Earth absorbs most of the energy but reflects back some energy in the form of
infra red radiation
- Greenhouse gases (e.g. CO2, Methane, CFC (Chloro Fluoro Carbon), Nitrous
oxide) present in atmosphere trans the infrared radiation and reflects back to earth
- This reflected energy falls on earth and also lower atmosphere and keeps it
warmer (Heats the earth’s surface)
This is called global warming or green house effect.
Effect of global warming on world and agriculture

- Increase in overall temperature on earth (e.g.) Earth’s surface temperature has
increased 1.4oF in lst one century (Forecast: 5oF rise in next century)
- Change in climate tremendously
- Melting of ice in Polar region
- Increase in seas level and submerging of coastal areas
- Flooding and intense down pours
- Drought in warmer regions
Impact of global warming on pest status

1. Due to change in climate, temperature and water availability, the farmers may
change the type of crops grown.
2. Due to increase in temperature, there can be outbreak of certain insect pests and
diseases.
3. In forest areas there will be a shift in tree species and also pest species.
4. In agriculture lands since cropping pattern is changed new crops to suit the
climate is introduced and new pests are also introduced.
5. When water availability is less, crops will be raised as rainfed. It will be difficult
to take up control measures without water.
Sources of green house gases

Developed countries : Emission from Automobiles and factories contain CFCs
Developing countries : Deforestation causes rise in CO2 level Methane gas
from paddy fields and livestock Nitrous oxide from
‘N’ based fertilizer
Lecture 27: INTEGRATED PEST MANAGEMENT - HISTORY, PRINCIPLES

AND STRATEGIES RELATIONSHIP BETWEEN DIFFERENT
COMPONENTS AND ECONOMICS
History of Integrated Pest Management
- Michelbacher and Bacon (1952) coined the term “integrated control”

- Stern et al. (1959) defined integrated control as “applied pest control which
combines and integrates biological and chemical control”
- Geier (1966) coined the term “pest management”
- Council on Environmental Quality (CEQ, 1972) gave the term “Integrated Pest
Management”
- Food and Agricultural Organization (FAO, 1967) defined IPM as “a pest
management system, that, in the context of associated environment and population
dynamics of the pest species, utilizes all suitable techniques and methods in as
compatible a manner as possible and maintains pest populations at levels below
those causing economic injury”
- In 1989, IPM Task Force was established and in 1990. IPM Working Group
(IPMWG) was constituted to strengthen implementation of IPM at international
level.
- In 1997, Smith and Adkisson were awarded the World Food Prize for pioneering
work on implementation of IPM.
Principles and strategies of Integrated Pest Management
I. Monitoring insect pests and natural enemies

Pest surveillance and forecasting are essential tools in IPM which help in
making management decision.
II. Concepts of injury levels

ETL (Economic threshold level) and EIL (Economic injury level) concepts are
followed to reduce the use of insecticide and their impact on environment.
III. Integration of pest control tactics

Proper choice of compatible tactics and blending them so that each component
complements the other.
The strategy of applying pest management tactics is similar to that of human
medicine.
i.e. Preventive practice
Curative practice
Preventive methods of IPM include the following

a. Natural enemies
b. Host plant resistance
c. Cultural control
d. Legal control (Plant Quarantine)
Curative methods of IPM include the following

a. Physical and mechanical methods
b. Inundative method releasing biocontrol agents
c. Chemical insecticides, IGR
- Preventive methods can be used, irrespective of the level of pest incidence. It can
be followed as a routine, even if the pest is at a low level.
- Curative methods have to be followed only when the pest attains economic
threshold level (ETL).
Integration of different components of IPM
There are two steps involved
i. Selection of appropriate method
ii. Integration of pest control method
i. Selection method: It could be preventive (prophylactic) or curative.

While selecting the method, it should possess following features:
a. It should be ecofriendly and cause minimum adverse effect on agro-eco system
a. There should not be any conflict between the methods
b. The methods should be least expensive
Integration of tactics
- Integrating management tactics is not simply adding a number of these tactics to
form a program.
- Actual integration involves proper choice of compatible tactics and blending them
so that each complements the other.
e.g. (1) Host plant resistance can be easily blended with crop sanitation
(2) Insecticide control is compatible with other preventive methods
(3) It is difficult to blend natural enemy release with others like pesticides
- Integration of tactics, requires interdisciplinary approach.
- A knowledge of other subjects like, nematology, plant pathology, microbiology,
crop and farm management also required when we go upward in level of
integration.
Relationship among different components of IPM

Prophylactic or preventive measures Pest surveillance Cultural
control Pest forecasting and Host
plant resistance Decision making Legal
control, Natural enemies
IPM
When
Curative measures pest
Mechanical and Physical methods reaches
Chemical control, IGR, etc. ETL
Inundative release of biocontrol agents
ECONOMICS OF INTEGRATED PEST MANAGEMENT

An Integrated Pest Management (IPM) programme can be successful only if reduces
cost on control measures, or increases crop yield (or both) and also reduce environmental
pollution and health hazards.
The following are some examples of successful IPM programmes worldwide

1. In Philippines, in 1993, IPM farmers obtained 4.7 to 62% higher rice yield and reduced
pesticide use by 15% compared to non-IPM.
2. In India in 1995, IPM farmers obtained 6.2 to 42.1% increased rice yield, and
reduced pesticide use by 50% compared to non-IPM farmers.
3. In India on cotton crop, adoption of IPM technology resulted in 73.7 and 12.4%
reduction in the number of insecticide sprays against sucking pests and
bollworms. In spite of reduction in pesticide sprays 21-27% increase in seed cotton
yield was obtained in IPM areas compared to non-IPM. Natural enemy population also
increased 3 folds.
4. In Thailand in 1993 adoption of IPM technology resulted in 145% increase in net profit
in IPM fields over non-IPM fields in cruciferous vegetables.
5. IPM is useful and economical in high value, plantation crops like Coconut,
Coffee, Tea, Cashewnut and Arecanut.
Institutional support for IPM

International: IPMWG, FAO, CABI, ICIPE
Global IPM facility (1992) - Sponsored by FAO, UNDP, UNEP and
World Bank
National : NCIPM: National Centre for Integrated Pest Management at Faridabad
(Near Delhi) (1988) - Supports IPM in India
Lecture 28: INTEGRATED PEST MANAGEMENT - ISSUES AND OPTIONS

ECOFRIENDLY IPM-INDIGENOUS/TRADITIONAL TECHNOLOGIES IN
IPM
Constrains in IPM have been listed by IPM task force as follows:

i. Institutional constraint
IPM requires interdisciplinary approach to solve pest problem. Lack of
coordination among different institution is a constraint. Research programme based
on farmer’s neem - is lacking.
ii. Informational constraint

Lack of information on IPM among farmers and extension worker. Lack of
training on IPM.
iii. Sociological constraint

Some farmers feel it is risky to adopt IPM compared to use of pesticides alone.
Our farmers are habituated to using more pesticides.
iv. Economic constraint

Lack of funds for training farmers and extension workers on the use of IPM.
v. Political constraint
- Vested interest associated with pesticide trade
- Pesticide subsidy by Government
These are the constraints for the implementation of IPM.
Options/strategies in IPM implementation

Acceleration of IPM implementation requires the following
i. Farmer’s participation
Farmers must be encouraged to participate in IPM and give their views.
ii. Government support

Government can remove subsidies on pesticides and allot more fund for IPM
implementation.
iii. Legislative measures

Suitable legislation (law) may be passed for adopting IPM by all farmers (IPM
will be successful only if adopted on community basis).
iv. Improved institutional infrastructure

National level institution for implementation of IPM is a must. Data base on
role of biotic and abiotic factors on pest population, crop yield are required.
v. Improved awareness
Awareness should be created at all levels on IPM i.e. Policy makers, farmers,
consumers and general public. NGOs (Non Governmental Organisation) should be made
aware of the advantages of IPM.
Ecofriendly IPM
- IPM which lays more importance on environmental safety. All methods except the
use of chemical insecticides are encouraged.
- ‘Organic farming’ is a new concept where no chemical pesticide or fertilizer is
used in agriculture.
- Ecofriendly IPM may be followed in organic farming
- Ecofriendly IPM uses methods like biological control, behavioural method,
physical, cultural and mechanical methods.
- Here more stress is given to environmentally sustainable pest management.
Indigenous/Traditional technologies in IPM

The following are some examples of traditional technologies in IPM
i. Cultural methods: (a) Farm level (b) Community level
- which were originally practiced by farmers.
Examples: Already covered in previous classes.
ii. Physical and mechanical methods originally followed by farmers
e.g. (a) Use of storage bins, treatment of stored grain with vegetable oil etc., to ward
off storage pest.
(b) Tanjore bow trap for rats
Other examples can also be quoted.
iii. Farmers’ wisdom on pest control tactics as follows
e.g. (a) Use of scare crows to ward off bird pests
(b) Use of ‘Kavankal’ to ward off birds
(c) Use of ‘Pachakavya’ a mixture of cowdung, with other ingredients has been
tried as a pest control agent - Research is ongoing.
(d) Use of chilli mash and garlic juice spray against rice earhead bug
Many other similar techniques are followed by farmers. Research has to be done
to prove their usefulness in IPM.
Lecture 29: IPM (Integrated Pest Management) for Rice

1. Avoid use of excess nitrogenous fertilizer which induces BPH and leaf folder
2. Remove/destroy stubbles after harvest
3. Trim field bunds and keep field free from weeds
4. Control irrigation by intermittent draining to manage BPH (Alternate wetting and
drying of field)
5. Avoid close planting, especially in BPH and leaf folder prone areas/seasons
6. Provide rogue spacing of 30 cm at every 2.5 m interval to take up plant protection
operation
7. Use light traps to monitor incidence of pests
8. Avoid resurgence inducing chemicals against BPH like Methyl parathion and
quinalphos
9. Remove stem borer egg masses by dipping off tip of rice seedling during
transplanting
10. Select and use resistant varieties against major pests
11. Manage caseworm by passing rope on crop and draining water
12. Release egg parasitoid Trichogramma japonicum on 30 and 37th day after planting
against stem borer
13. Release egg parasitoid T. chilonis and bacteria Bacillus thuringiensis against leaf
folder
14. Use of Neem Seed Kernel Extract 5% (NSKE 5%) or Neem oil 2% against
Earhead bug
15. Use insecticides as need based application if pest reaches ETL
S.No. Pest (on rice) ETL

1. Thrips 25/5 passes of wet palm
2. Stem borer 10% Dead heart or 2% white ear
3. Gall midge 10% Silver shoot
4. Leaf folder 10% leaf damage (at vegetative stage)
5% leaf damage (at Bootleaf stage)
5. GLH 5/hill at vegetative stage, 10/hill flowering stage, 2/hill in
RTV endemic areas
6. BPH (Brown 1/tiller; 2/tiller when spider present at 1/hill
Plant Hopper)
7. Earhead bug 5 bugs/100 panicle - Flowering stage
16 bugs/100 panicle - Milky stage
IPM FOR COTTON
1. Selection and use of resistant/tolerant varieties against major pests

2. Use of light trap to monitor hoppers, bollworms, cutworm
3. Use of pheromone traps for monitoring/mass trapping bollworms
4. Collection and destruction of infested plant parts, squares and bolls
5. Growing trap crop (e.g.) Castor for Spodoptera litura
6. Manual collection and removal of egg masses of S. litura
7. Hand picking of bollworm larvae
8. Use of insect viruses SlNPV and HaNPV against Spodoptera litura and
Helicoverpa armigera respectively
9. Avoid ratoon and double cotton crop
10. Avoid staking of stalks in the field
11. Synchromise sowing time at village level
12. Follow crop rotation with unrelated crops
13. Removal of alternate hosts
14. Judicious use of nitrogen and water to manage hoppers and white flies
15. Use of yellow sticky traps for whiteflies
16. Observe IRM (Insecticide Resistance Management) practices like
a. Treat seeds with Imidacloprid 7.5 g/kg seed of cotton to manage early stage
sucking pests
b. Use of predators like Chrysoperla carnea
c. Use of egg parasitoid Trichogramma sp. against bollworms
17. Apply insecticides only based on need, when pest population/damage reaches
ETL
S.No. Cotton pest ETL

1. Leaf hopper/thrips 50 nos./50 leaves (or 1/leaf)
2. Whitefly 5 nymphs/leaf
3. Bollworms 10% damage of reproductive parts
4. Stem weevil 10% infested plants
5. Spodoptera litura 8 egg masses/100 m row
Lecture 30 : BIOTECHNOLOGY IN PEST MANAGEMENT

Use of molecular biology techniques for the management of insect pests. The
following are some strategies.
1. Wide hybridization: This technique involves transfer of genes from one species
to other by conventional breeding. The genes for resistance are transferred from a
different species. e.g. WBPH resistant gene has been transferred to Oryza sativa
from O.officinalis.
2. Somaclonal variability: The variation observed in tissue culture derived
progeny. e.g. Somaclonal variants of sorghum resistant to Spodoptera litura has
been evolved.
3. Transgenic plants: Transgenic plants are plants which possess one or more
additional genes. This is achieved by cloning additional genes into the plant
genome by genetic engineering techniques. The added genes impart resistance to
pests.
Transgenic plants have been produced by addition of one or more following

genes.
a. Bt endotoxin from Bacillus thuringiensis

b. Protease inhibitors
c. -Amylase inhibitors
d. Lectins
e. Enzymes
c. Bt endotoxin gene: The gram positive bacteria Bacillus thuringiensis produces a

crystal toxin called (delta) endotoxin.
The endotoxin is a stomach poison and kills the lepidopteran insects if
consumed.
The gene (DNA fragment) responsible for producing endotoxin is isolated

from Bt and cloned into plants like cotton, potato, maize, etc. to produce Transgenic
cotton, etc.
Transgenic Bt plants Target insect pests
1. Cotton Bollworms, S. litura
2. Maize European corn borer
3. Rice Leaf folder, stem borer
4. Tobacco, Tomato Cut worms
5. Potato, Egg plant Colarado potato beetle
b. Protease inhibitors (PI) gene

Insects have proteases in their gut which are enzymes helping in digestion of
protein. Protease inhibitors are substances inhibit the proteases and affect digestion in insects.
The protease inhibitor gene are isolated from one plant and cloned into another to
produce transgenic plants.
e.g. Transgenic apple, rice, tobacco containing PI. e
e.g. Cowpea trypsin inhibitor (CpTI) is a PI isolated from cowpea and cloned into
tobacco. This transgenic tobacco is resistant to Heliothis virescens.
c. -Amylase inhibitor gene

-Amylase is a digestive enzyme present in insects for digestion of
carbohydrate. -Amylase inhibitor, affect digestion in insects.
Transgenic tobacco and tomato expressing -amylase inhibitor have been

produced which are resistant to Lepidopteran pests.
d. Lectins genes
Lectins are proteins that bind to carbohydrates. When insect feed on lectins, it binds
to chitin in peritrophic membrane of midgut and prevents uptake of nutrients. e.g.
Transgenic tobacco containing pea lectin gene is resistant to H. virescens
e. Enzyme genes
Chitinase enzyme gene, and cholesterol oxidase gene have been cloned into plants
and these show insecticidal properties.
PYRAMIDING GENES
Engineering transgenic crops with more than one gene to get multi-
mechanistic resistance is called pyramiding of genes. e.g.
1. The CpTi gene and pea lectin gene were cloned to produce a tranagenic tobacco.
2. Transgenic potato which express lectin and bean chitinase have been produced.
Potentials/Advantages of Biotechnology in IPM

1. Slow development of resistance against transgenic Bt, PI, lectins
2. All plant parts express toxin and so no need for insecticide spray
3. No need for continuous monitoring
4. No environmental pollution, safe to NE, non-target organism
REFERENCE BOOKS
1. Ayyar, T.V.R. 1963. Hand Book of Economic Entomology for South India –
Govt. Press, Madras, 516 p.
2. David, B.V. and T. Kumaraswami. 1982. Elements of Economic Entomology –

Popular Book Depot, Madras, 536 p.
3. David, B.V. and M.C. Muralirangan and M. Meera. 1992. Harmful and
Beneficial Insects – Popular Book Deport, Madras, 304 p.
4. Dhaliwal, G.S. and E.A. Heinrichs. 1998. Critical issues in pest management –
Commonwealth Publishers, New Delhi, 287 p.
5. Dhaliwal, G.S. and Ramesh Arora. 1998. Principles of Insect Pest Management
– Kalyani Publishers, New Delhi, 297 p.
6. Dhaliwal, G.S. and B. Singh. 1998. Pesticides – The ecological impact in

developing countries – Commonwealth Publishers, New Delhi.
7. Grout, R.A. 1963. The Hive and the Honey Bee – Dadant and Sons Inc,
Hamilton, Illinois, 556 p.
8. Metcalf, C.K. and W.P. Flint. 1970. Destructive and Useful Insects : Their
Habits and Control – Tata McGraw Hill Pub. Co., New Delhi 1074p.
9. Pradhan, S. 1983. Agricultural Entomology and Pest Control – Indian Council of

Agricultural Research, New Delhi, 267 p.
10. Singh, S. 1975. Bee Keeping in India – Indian Council of Agricultural

Research, New Delhi, 214p.
****** ☺******
This Book Download From e-course of ICAR
Visit for Other Agriculture books, News,
Recruitment, Information, and Events at
www.agrimoon.com
Give FeedBack & Suggestion at [email protected]
Disclaimer:
The information on this website does not warrant or assume any legal
liability or responsibility for the accuracy, completeness or usefulness of the
courseware contents.
The contents are provided free for noncommercial purpose such as teaching,
training, research, extension and self learning.
******☺******

Insect Ecology Integrated Pest Management PDF

Uploaded by

Document Informationclick to expand document information

Copyright:

Available Formats

Insect Ecology Integrated Pest Management PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Insect Ecology Integrated Pest Management PDF

Uploaded by

Copyright:

Available Formats

Insect Ecology & Integrated Pest

This eCourse Developed By

1 Principles of Applied Entomology 5-7

2 Honey bees:- History of bee keeping 8-13

3 APIARY MANAGEMENT 14-17

4 ROLE OF HONEY BEES IN CROSS POLLINATION 18-21

5 BEE PRODUCTS - THEIR PROPERTIES AND USES 22-23

6 Effect of agricultural inputs on bee activity – Pesticide poisoning 24-29

7 Role of pollinators, weed killers and other beneficial insects 30-41

8 Insect ecology and balance of life 42-46

9 Population dynamics and role of biotic factors 47-50

10 Abiotic factors on insect population 51-54

12 PEST MONITORING 60-64

13 PEST MANAGEMENT 65-67

14 TRADITIONAL METHODS OF PEST CONTROL 68-75

15 LEGAL CONTROL METHODS 76-79

16 HOST PLANT RESISTANCE 80-83

17 BIOLOGICAL CONTROL 84-88

18 CHEMICAL CONTROL 89-91

19 PESTICIDES GROUPS 92-94

20 THE INSECTICIDES ACT, 1968 95-97

22 STERIITY METHODS 101-103

23 INSECT GROWTH REGULATORS 104-110

24 PESTICIDE APPLICATION METHODS 111-114

25 PESTICIDE COMPATIBILITY 115-120

26 IMPACT OF GLOBAL WARMING ON PESTS 121-122

27 INTEGRATED PEST MANAGEMENT 123-125

28 INTEGRATED PEST MANAGEMENT 126-127

29 IPM (Integrated Pest Management) for Rice 128-129

30 BIOTECHNOLOGY IN PEST MANAGEMENT 130-131

1. Fundamental Entomology or General Entomology

Applied Entomology or Economic Entomology deals with the usefulness of the

In fundamental entomology insects are classified based on their structure into

Economic classification of insects

This classification us according to TVR Ayyar.

Insects of no economic importance:-

Insects of economic importance

As food - for animals and human being.

House hold and disease carrying insects

Lecture 2: Honey bees:- History of bee keeping

There are five important species of honey bees as follows.

Apis cerana indica (Indian bee/Asian bee)

Apis mellifera (Italian bee or European bee)

Honey bee castes

House hold duty includes

d. Feeding and attending queen.

Sex differentiation in bees

Steps involving in swarming

Round dance Wag tail dance

2. Tail wagging dance or Wag-tail dance.

Lecture 3: APIARY MANAGEMENT

Pre-requisites to start beekeeping

Apiary site requirements

General apiary management practices

ii. Expanding brood net

iii. Sugar syrup feeding

iv. Supering (Addition of frames in super chamber)

- Cells uncapped using uncapping knife